PSP 2000 & 3000 Battery MOD

Подписаться 1,3 тыс.

Просмотров 147 тыс.

50% 1

This is a PSP 2000 & 3000 Battery modification. The mod will enhance your psp gaming system for longer game play, and we are talking about really loooooooooong gameplay to enjoy those emulators and iso for hours or even days.
The mod is also helpful because sony has stopped making the original batteries for a while now, and the knock-off brands really don't last as long when your on the go with your device.
So here is the solution and the items that you will need:
1) A PSP 2000 or 3000
2) Tape or Electrical tape
3) Exacto blade or Box cutter
4) Soldering iron
www.amazon.com/s?k=soldering+...
5)Tapered Tip Shear
www.amazon.com/gp/product/B00...
6) Screwdriver and Tweezers
www.amazon.com/gp/product/B01...
7) PSP battery
www.amazon.com/s?k=psp+batter...
8) Lipo Battery 3000mah (size: Width 105mm Length 50mm Thick 6mm):
www.ebay.com/itm/3-7V-3000-mAh...

Опубликовано:

14 сен 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 609

@Bubsy_Mods 5 лет назад

Hey gang its been a while. I have created a PSVita tutorial on installing auto h-encore, SD2Vita setup, and PKGJ installation. Check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-b8QEJpQJ504.html

@stanchata 5 лет назад

How long does this battery last? I mean how fast does it wear out?

@MattMathisSoftwareGuy 2 года назад

What a good idea to reuse the board from the old battery! Only thing I would add is that kapton tape is a good resource for anybody doing a lot of electronics prototyping/soldering/modifying. It's non conductive and used a lot for shielding/insulating small electronics work. It's the orange stuff on the Li-po battery you used.

@Phoenix3568 6 лет назад

5:00 removal of UMD Drive and excess plastic 21:48 getting PCB board out of battery 30:45 soldering new battery to PCB board 32:00 re-instillation

@Nt_partlycloudly 5 лет назад

Thank you

@korychisholm2629 5 лет назад

You are the most useful person here. THANK YOU

@legomancb12 2 года назад

I can't believe I scrolled through this whole video wondering where the UMD drive would go only to get to the end and realize it can't, lol

@TimothyTimPSP 6 лет назад

Hey man Great idea! Can't believe I didn't think of this. What a great modding idea. I'm totally going to do this to one of my psp's! Thanks for the video. Super helpful!!

@Bubsy_Mods 6 лет назад

TimothyTim PSP, Thank you! Enjoy modding your psp’s :-)

@Javierm0n0 6 лет назад

thanks for this dude. I wasn't sure if I should keep my og battery or if there was no need for it. I didn't even think about the brain board in there.

@Balandinis 3 года назад

I was planning on replacing the battery in the battery case itself, but damn now I want to do this way more. I guess I ought to pay a visit to the local battery store. Great video!

@Bubsy_Mods 3 года назад

Thank you very much Dove😊. Yeah definitely try it out, it works wonders on the go for a longer game play. So far more than 2 years have gone and it's still working great👍

@amshermansen 6 лет назад

Awesome tutorial. Primed my PSP in less than 10 minutes, while I wait for the battery to arrive. Accidentally snapped the UMD back a tiny bit, but a bit of superglue and a fresh coat of paint, should fix that. :D

@Bubsy_Mods 6 лет назад

Nice 👍

@jezerkent 5 лет назад

Great work! Followed your guide with a couple adjustments. About to do the same mod on my PSP1000. Thanks!

@Bubsy_Mods 5 лет назад

Sweet! 👍

@gabrielpatten6939 3 года назад

Freaking sweet dude!! I just finished and it's awesome

@Bubsy_Mods 3 года назад

Excellent 👌

@abelxcane 6 лет назад

Thinking about doing this for a PSP 3000 I have lying around. Nice job on the video and the clear instructions.

@Bubsy_Mods 6 лет назад

Thank you abelxcane ! Hope this tutorial is helpful for everyone

@matthewsolomon4655 5 лет назад

Great tutorial. Thank you for the links! Awesome work!

@Bubsy_Mods 5 лет назад

Thanks man👍

@icecreamsoda5474 5 лет назад

Nice video man. Subscribed. Keep it up.

@Bubsy_Mods 5 лет назад

Thank you👍

@justinzetha5310 4 года назад

Finding something to do in this quarantine time, restoring an old psp to its Glory, and didn't know that you can do this kind of modification. Awesome video 👍👌

@Bubsy_Mods 4 года назад

All the best Jadz👍 Thank you for liking the guide😊

@somecharacter01 3 года назад

Same brother currently replacing my flex buttons and menu buttons

@emerson-biggons7078 5 лет назад

That PSP is gorgeous.

@Bubsy_Mods 5 лет назад

Thanks man 👍

@emerson-biggons7078 5 лет назад

@@Bubsy_Mods Heres an Idea for a battery mod, instead of using a very external battery solution you could use: A smaller battery, remove the UMD drive, and place the battery inside to replace both items and just glue parts on to the back to make it look whole; that or use screws or something else.

@StenGilles 2 года назад

Had one at lauch it was glorious

@aerontehan6939 2 года назад

I have the exact psp but painted over some buttons cause it got worn off

@rauschka3395 2 года назад

Been trying to find a used one and just can’t find one without scratches

@sulhwaunnie 4 года назад

solid and very straight forward tutorial 👌 thanks!

@Bubsy_Mods 4 года назад

Thank you very much 😊

@pg63clothing 4 года назад

great video, picked up a $5 3001 a few weeks ago will be doing the same! only note I have is you stress me out with the boxcutter on the battery LOL

@Bubsy_Mods 4 года назад

Nice 👍👍👍 That's a great deal. Eeeeh there's enough space on those psp batteries 😂😂

@pg63clothing 4 года назад

@@Bubsy_Mods it was a gamble, screen is broke but easy enough to fix, throw CFW and mod battery enjoy for about $40 all in all - so not the "best" deal in the world in the end but hey gives me something to do!

@Bubsy_Mods 4 года назад

@@pg63clothing Cool!

@sergeyvorobei 4 года назад

Hi Bubsy! Tell please, thickness - 6mm (that you use in video) is optimal thickness of battery to fit in psp? At 7mm, the UMD door will not close?

@ramen4341 5 лет назад

Hey, I wanted to ask if you had a problem where the battery you used and linked in the video was too thick to fit into the psp. I tried doing this mod with the battery source used and it wasnt able to close :(

@DjPerryDay 6 лет назад

Nice work. A mod a need on my 1000

@carston101 9 месяцев назад

This + a screen mod and you've got a fantastic little emulation device.

@Kentololable 4 года назад

Thanks for this tutorial. Successfully modded my psp 2000.

@Bubsy_Mods 4 года назад

Well done bro🤙

@Spartan764 4 года назад

Successfully modded my psp 3000 thanks

@saifob5800 3 года назад

For how long does it last?

@Kentololable 3 года назад

@@saifob5800 literally ages. Like 7-8 hours with medium brightness

@marcosrenan7855 Год назад

How is that battery holding up, is it worth the trouble?

@thepunisher520 6 лет назад

Liked and subbed! Great video. I have a psp 1000 and I was wondering if the UMD removal would he the same way as this or maybe id have to go in the front and remove the LCD?

@Bubsy_Mods 6 лет назад

Thanks bro, much appreciated! The process should be the same. You don't have to remove the front portion of the psp.

@CutlassCraft 5 лет назад

Thank you for this 👍

@pirottr779 6 лет назад

a lot easier than I thought it'd be. I bought a psp without a battery and the knockoff battery I ordered from ebay only lasts 1-2 hours despite claiming to last 5+ hours in the battery info.

@Bubsy_Mods 6 лет назад

Pirott R , exactly the reason why I did this mod ;-)

@Corrodias 4 года назад

I just performed this on my 2000 model PSP. It was my first time soldering, so I was a little awkward, but the job was simple. The PCB didn't *exactly* match what was shown, but it was close enough. They must have used a lead-free solder on the PCB, because it took a lot of heat to melt what was on it. I had to bend the connector downward a little bit to get it to reach the pins underneath the battery, but it's all in there now, held in securely by the battery cover. Only had to cut off one side of the UMD cover; the other can stay there. What wasn't apparent from the video is how tight of a fit this is; there's just barely enough room under the battery cover to jam all of this in. The battery is putting mild pressure on the cover, but it's securely hooked in, so I'm not worried.

@Bubsy_Mods 4 года назад

First of all congratulations on towards the process you went through during your battery mod. The battery I chose and recommended towards the users is a great fit considering those areas I had to cut out it fitted perfectly. I'm surprised that it was a tight fit and causing a slight pressure. I've done it to couple of PSP's and I had no issue using the same battery type.

@Corrodias 4 года назад

@@Bubsy_Mods The markings on the battery are a bit different, though it otherwise seems very similar. It may be a slightly different, slightly thicker model that I received.

@Bubsy_Mods 4 года назад

@@Corrodias interesting 🤔

@DavidFleisch 4 года назад

do you know is LD1 is the positive terminal ?

@Bubsy_Mods 4 года назад

@@DavidFleisch LD1 is positive. Here's a topic about it: www.instructables.com/id/How-to-Fix-a-Psp-Battery/

@LouisOrangeCat 2 года назад

Thanks with those instructions i just made a "new" 1200mah battery for my psp 3000

@Bubsy_Mods 2 года назад

Thank you very much. I always wanted to make these sort of guides to better asist people 😊

@emmanuelmendioro3043 5 лет назад

@31:30 Hello may I know from what OST this music came from? I've been digging my MMX5 OST and I know it's not the right one.

@emmanuelmendioro3043 5 лет назад

Or it could be from KOF? I just can't lay my finger on it.

@Bubsy_Mods 5 лет назад

@@emmanuelmendioro3043 you got it! From Kof'99 The Way to Rebirth, Kim's Team ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UNK9MA7NUiM.html

@dimitrisloufakis916 6 лет назад

Great tutorial! Thank you so much for listing the battery pack! How goes it hold up? Does the new battery move around at all into your PSP, or would you say it fits perfectly? I am asking because there might be a different battery that can work better for this mod. What is your experience on this?

@Bubsy_Mods 6 лет назад

Thank you bro! The battery fits perfectly that’s why I recommend it. The battery holds up pretty good and it’s been over a year 😁 Once you fit the battery in the psp I would use either tape or glue it in, but I used tape as seen on the video.

@dimitrisloufakis916 6 лет назад

Thank you for the reply. I would also prefer to use tape. Double sided preferably. I don't like to play around with glue in projects like this because it feels more permanent, even if it isn't. I'll definitely give this a try as soon as possible. Thanks for the motivation!

@Bubsy_Mods 6 лет назад

Awesomeness!!!

@MCAQUIN0 5 лет назад

Man I really need a soldering tool

@AmpliFreQuency 5 лет назад

I ordered almost all those parts in the description and they came in the mail today. I also ordered the same battery, along with a 4000mAh of the same dimensions, except the length is 5mm shorter, and the thickness is 1mm smaller. The code (?) of the 4000mAh battery is 5050100 if anyone is looking. I have them both prepped using circuit boards from gutted official slim PSP batteries, and I cannot wait for my 2000 & 3000 to come in from Japan next week to start cutting and fitting! Thanks for this guide!

@Bubsy_Mods 5 лет назад

Good to know that there's a 4000mah, have to check it out. Thanks 👍

@AmpliFreQuency 5 лет назад

@@jasonleeman5817 Not a problem, and yes, I purchased the PSPs from an eBay seller located in Japan, which took about two weeks for them to arrive, packaged VERY nicely, amazing condition: i.imgur.com/Jt04HD4.jpg

@brenobarbosa3489 4 года назад

@@jasonleeman5817 links?

@emiisxd 5 лет назад

holy shit thats cool imma do this on my psp

@user-jm8ri8kb4k 3 года назад

You: imma do this on my psp PSP: 😢

@kingofbaja 4 года назад

Hi Dude! I got a question: Li-Po batteries have always a PCB on them to regulate the charging & discharging, but theres already such PCB on the knock-off battery PCB, so you got two of them. Did you get any problems until now? greetz

@Bubsy_Mods 6 месяцев назад

None so far.

@orange329 3 года назад

how did you fit the circuit board in a psp 3000? my pcb sticks out when i try to fit it into the 3 prongs because the battery is too big? im using the same battery model as you

@Bubsy_Mods 3 года назад

Recently I just ordered from the same ebay supplier for these lipo batteries and there is a slight difference of thickness in them unfortunately (Even though on their site the description is the same). I was even bummed when I couldn't close the psp door. So what I did was use a rotary cutter and cut the plastic layout as a rectangle shape (not in the area where the 3 prongs are; where you put the psp battery, basically the cutting area is around the UMD section) so the battery could fit in there snug when closing the psp cover. Hope that helps.

@georgigeeksky8349 Год назад

Thanks for the video! I have questions regarding the BMS boards, isn't it better just to leave one pcb? I have the BMS board of the original battery and was wondering if it's okay just to connect it to the bare terminals of higher capacity Li-Po. Are there any benefits of using both the bms from psp battery and the one you are adapting to the psp?

@Seveinis 10 месяцев назад

I’m almost positive the pcb from the psp battery is regulated to power the system / charge at the specified current. The lipo battery board might not be the same and could result in some bad output and charging. I’d play it safe and use both

@DanieleGiorgino Год назад

Great video, thank you.

@Bubsy_Mods Год назад

I'm glad you like it. Thank you 😌

@jeshu8372 Год назад

this is a very simple tutorial and a great solution, maybe another option it is put a little new battery inside disc reader (using wires) and with this you have a new normal battery with out delete the disc function. Regards.

@Bubsy_Mods Год назад

Thank you 😊. You could maybe find a small enough battery to fit in the UMD area but it might not have sufficient battery life for long time gaming, hence the size of the psp original battery. It's small, but it wouldn't endure the long play time.

@Codemonkey3 6 лет назад

I know it's been awhile since the video was posted. But what is the ultimate play time you got out of this mod? The official battery pack I'm using is at 100% charge gives me about 5-6 hours of life. At 87% yours suggested 6 hours of battery life so at 100% it seems like it would be an improvement of maybe two hours from stock. But I read in the comments the battery gauge isn't accurate so what was the playtime ultimately increased to in your experience?

@Bubsy_Mods 6 лет назад

For me on and off playback has been 8 hours in total. One day I'll check and do a non-stop playback. But keep in mind certain emulator's you can adjust the clock speeds (such as the snes, neo-geo, Capcom, and GBA are set to 333mhz by default for smooth playback, which consumes slightly more of the battery life).

@ducciboi 4 года назад

PSP 1000 is a lot more work. Have to take out the front plate, start/menu/home buttons, LCD panel, and panel frame to take out the UMD drive. But this mod definitely works for the 1000 so thanks!

@Bubsy_Mods 4 года назад

I'm sure it was some work. Great job in getting through with it👍

@donm7928 3 года назад

nice work! is your mod still working? I am planning on doing this but I'm hesitant--is it really safe to charge Li-Po battery through the same circuit in the vid or using Li-Ion chargers in general?

@Bubsy_Mods 3 года назад

So far no issues what so ever. Had couple of PSP's done and they're good.

@donm7928 3 года назад

@@Bubsy_Mods awesome! thanks for responding to this quick! I'll be back for updates once I get my hands on my new battery.

@ootwii Год назад

@@Bubsy_Mods how much.for u too sell a psp.witj this mod??

@ponchp.9901 3 года назад

Hi there, I'm planning on doing this and I was wondering if a 3500mah battery would be okay to use instead of a 3000 one?

@Bubsy_Mods 3 года назад

You could 👍I used the 3000 mAh battery because it fitted perfectly in the PSP housing.

@LetiferTV 5 лет назад

The 5:53 hours left of battery isn't accurate, I don't think it knows the exact capacity of the battery, but the graphic with the 3 bars may be right since it knows how much is left.

@Ranter-yi9zq 4 года назад

question. how can we prevent such error from happening? are we supposed to have the battery fully charged before soldering it to the PSP battery board? Thanks

@danielauen7790 4 года назад

@@Ranter-yi9zq outright preventing it might not be possible, the psp battery board might need a chip re-flashed (if even possible) or it could learn the capacity of the new battery over time.

@humzaiqbal5469 3 года назад

@@danielauen7790 It learns the capacity over time

@CotyRiddle 3 года назад

@@Ranter-yi9zq fully charged is ok if you are using the original PSP-110 battery pack PCB put it together and plug in the charger turn it on then unplug the charger. run it all the way down and then fully charge. (im useing an 10650 lol and it says it is at 100% and still charging) its been 5 hours.... before i charged it i got 9 hours of video playback

@CotyRiddle 3 года назад

the run time displayed on any device is an estimation.

@indefinido7661 4 года назад

hey, amazing video!!! great for noobs thank you so much :D may i ask you a question... Could i do the solding without that tool that you are using? i checked on internet and apparently you can, it works great. But still i would love to have your opinion.

@Bubsy_Mods 4 года назад

Thank you 😊. Hey if you have another solution besides soldering go for it👍 Post me a link I'm curious as well🤔

@rxzero00 4 года назад

Is there a way to amplify the speakers internally and not just replace them outright with big speakers like most early PSP modders? I saw that Retro Modding sell custom amplifiers for the Gameboy Advance speakers.

@Bubsy_Mods 4 года назад

Interesting 🤔 Never done it rxzero00

@SacredMilkOG 3 года назад

I want to add some honest bass sound to my 2000... it looks like it's UMD drive is dead on the board so I was thinking of taking that out and putting it in there. But- I can't find too many new mods. Please keep making more :) I want to join the wagon and start uploading mod vids and such soon. Itching to, but I need to get my source gathered again. :D

@CotyRiddle 3 года назад

not enough space. but the internal amp is pretty powerful and will power most if not all that you can throw at it. seen one guy build a custom case for his with larger speakers from a bluetooth speaker. was pretty effing loud to.

@KrovaSteam 6 лет назад

Hey, I've just done this exact mod to my PSP 1000, and I'm wondering if you have any quirks in the battery information display. If I put my PSP to sleep and wake it, the battery percentage displayed under 'battery information' will vary by about 20%. Does yours show a fairly accurate percentage or does it fluctuate? I'm just trying to make sure there isn't something wrong with the PCB or battery I used.

@Bubsy_Mods 6 лет назад

KrovaSteam it’s pretty accurate on my mods with no issue. I guess it varies on some emulator that uses more resources when you adjust the clock speeds.

@KrovaSteam 6 лет назад

I haven't done either of those things but I'm sure that's the case.

@MuscleMMan 2 месяца назад

Say less! This video is enough for a help Really needed this! Q: Can i use 4000 mAh battery?

@CuriousTinkering 6 лет назад

I think you need to protect the battery from the underside of the PCB charging board. You don't want those pins on back to puncture the battery.

@Bubsy_Mods 6 лет назад

It's pretty much flat. I don't think anything would be punctured.

@utahnl 6 лет назад

You can clearly see the indentations on the batteries metal film, a bit too much pressure or an impact could puncture it. You dont want it burst into flames. Lithium batteries can be very dangerous if mishandled, especially lithium polymer batteries.

@Corrodias 4 года назад

Disclaimer: I have never done this sort of thing before. That said, I think I would snip any protruding pins on the back and maybe file them down to get them smooth. You want to leave some material because it's probably the soldering point, but you don't need protruding pins.

@Marz7 Год назад

This was my first thought

@GameIsMyOxygen 2 года назад

I'm planning to do this but my psp's battery is puffed up. Im scared that opening it might cause it to explode or something. Any suggestions?

@NonsensicalSpudz 3 года назад

oh wow I thought it was more complicated, might do this, i've got an original battery which has mildly swollen, and then a third party one in the PSP

@MrDjhulk2 5 лет назад

also had sucess, but on a psp 1001. after i removed the umd, i just cut away at the plastic and one side of the battery cover. was able to fully close psp without anything sticking out, and have some tape holding it all

@Bubsy_Mods 5 лет назад

Great!

@Corrodias 4 года назад

When watching this video, I thought to myself that it seemed unnecessary to remove *both* sides of the UMD tray cover, and that also further weakened it structurally.

@comil359 Год назад

Hiya, amazing tutorial you are an absolute legend. New life given to my old PSP-1000 - one random thing though I’ve had the occasional battery flat indicator even though the battery is still reading out 3.7V. I can restart it and then it’s fine for a while. Any idea what it could be? I am using the PCB from the original battery (which died I assume a long time ago!).

@Bubsy_Mods Год назад

Hey that's awesome. I am happy that you enjoyed the tutorial and now have a battery modded psp. With the battery flat indicator 3 questions: 1) Have you waited and fully charged the battery? I know it takes longer from charging it from orange light to green. 2) The condition of the lipo battery, is it holding up the charge? Maybe you need to change that? 3) Maybe fault on the PCB board from the psp battery? Did you try another one?

@juniorcook4094 3 года назад

Good idea. I may try that with a note 9 battery

@RaulAyanami Год назад

it's been pretty hard to find any battery model that fits the psp. a 10mm battery may fit?

@irwnbgrs 6 лет назад

Will this mod work on a original psp battery pcb? will it affect the new battery charging mechanism? since the pcb from the original battery still think it's connected to the original battery which is smaller in capacity instead the new bigger battery capacity thus it won't charge fully and will perform the same as the original battery?

@Bubsy_Mods 6 лет назад

It will work with the original PCB. It's been months now and it hasn't affected the battery and it's still going strong.

@rodrigokw 4 года назад

Hi, kinda late to the game, but I have a question: does the orange light ever goes off when you mod the battery? I've just done mine with a Samsing Galaxy S4 battery, but the light didn't turn off. It reads as 100% in the menu, and the charger is cold, like it's not being used.

@Bubsy_Mods 4 года назад

Usually the orange light goes on when charging the psp. The green light on the other hand is when the battery is in use.

@rodrigokw 4 года назад

Yeah, I know, I'm talking about it turning off when the console is fully charged

@rodrigokw 4 года назад

Great video by the way!

@sergioosorio2993 4 года назад

@@rodrigokw I just did the mod with a samsung galaxy s4 battery and it works fine, I'm using a original sony battery pcb.

@XTheJenovaProjectX 4 года назад

I did this mod because of your video and it has been wonderful for months now but have recently had issues. The PSP just shuts off out of the blue and only works when the charging plug is in. I checked the battery with a multimeter and it gets 3.8v at the lipo and at the end of the PSP battery prongs. No idea what’s going on

@Bubsy_Mods 4 года назад

Some of those knockoff psp battery circuit boards are crap. I had to replace one of those and then it worked perfectly fine. Try to do that and you should be fine 😉

@yota5692 6 лет назад

Great Video, excelent, but i'm wondering, How's it going now a days?

@pinkandDamaged 5 лет назад

Looking at the battery size will an 8 mm thick battery work? I know you used a 6mm just wondering if there is clearance.

@Bubsy_Mods 5 лет назад

Not really. That's the only reason why I used that battery for this mod.

@chronocr7232 2 года назад

I got a PSP without battery can I connect 3.7v lithium polymer battery directly without and BMS or do I need bms

@marcint5078 6 лет назад

i see there is already some board on new battery. isn't it enough to solder directly wires from lipo battery to PSP without the extra board from sony battery?

@Bubsy_Mods 6 лет назад

I just did it for safety measures. You can do however you wish with the mod.

@TheManOfMuscle 3 года назад

Hey, is it safe to get the pcb from a bloated battery? What do I have to worry about?

@farrypro 5 лет назад

That was interesting 👍

@Bubsy_Mods 5 лет назад

Thanks mate!

@sol4632 4 года назад

Hope you're still active, but can I ask if your psp is still working. if not how long did this mod lasted for you?

@Bubsy_Mods 4 года назад

Still kicking and working. I've done it to 2 psp 3000 models as well as 3 psp 2000 models😁

@sol4632 4 года назад

@@Bubsy_Mods thanks man! Thanks for this guide! I'm going to order the tools and battery now. Thanks again!

@Bubsy_Mods 4 года назад

@@sol4632 Anytime bro👍 All the best to ya😊

@Redrose03 6 лет назад

Dude this is genius, BTW what kind of sauter should I use for this?

@Bubsy_Mods 6 лет назад

this is what I used, but you can use any soldering iron. www.amazon.com/gp/product/B01C9P7HDQ/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

@AndehX 6 лет назад

solder*

@DarkShadowHawk720 5 месяцев назад

Like the nintendo gameboys, i would love it if there were someone who took other people’s PlayStation Portables and improved them for people who don’t have the skill/confidence to do it themselves but want to revive/improve their PSP.

@mohammedyasin4031 4 года назад

I would recommend someone who is interested in doing this mod to buy a new shell and frame as well. Saving the UMD drive, original shell could save you a lot of hassle if you want to flip the console and also, if your case is in a fairly good condition you could even get a good chunk of change out of it 😊

@kellylucas2633 3 года назад

Psp jail break went good and I ordered the battery from the description. I already have my amazon junk battery to cut up. Hope it all works out.. But the battery I ordered from ebay that u recommend I got an email saying it might take 3 months to get it. I hope I gets here b4 that

@Bubsy_Mods 3 года назад

Wooooooah I ordered mine last month and it took me 3 weeks. But 3 months😳 wow! That's crazy.

@calibomber209 2 года назад

can i do this with an iphone 3g s battery? does it still hold charge today; whats the play time difference between old vs new>?

@sunilkarki4670 4 года назад

is it safe to remove the circuit attached to the cell phone battery?

@Suchoj 4 года назад

Dunno if anyone will see this, but I wanna mod my PSP and can't find the polymer batteries anywhere :( It's saying its sold out at Amazon, and I can't get a hold of it in my local online retailers in Brazil (I only found small ones for bluetooth speakers and such). Any tips?

@Bubsy_Mods 4 года назад

How bout eBay?

@CotyRiddle 3 года назад

hit up a battery's + store you can find all kinds of battery's.

@brun0ls 5 лет назад

Awesome video! Do you think everything should fit in the 1000 model? I'll be using the genuine battery circuit. :)

@Bubsy_Mods 4 года назад

PSP 1000 has a bigger casing than the 2000 and 3000. You should be fine👍

@cliffordsolomon7423 5 лет назад

Can you give a follow-up on this project? Battery still working well? No overcharge concerns?

@Bubsy_Mods 5 лет назад

I've done it on 3 PSP models from 2000 to 3000. The very first model I did is still holding strong on charge. No overheating and so far no dead lipo battery. P.S.: No circuit board meltdown 😉

@cliffordsolomon7423 5 лет назад

@@Bubsy_Mods that's great to hear! Thanks for the update! Will be following your guide shortly.

@Bubsy_Mods 5 лет назад

@@cliffordsolomon7423 sweet! All the best dude!

@Bubsy_Mods 5 лет назад

@Angel Alejandro I did it on knock-off battery circuit board.

@martindolanek8197 6 лет назад

is it possible to use the pcb from the original sony battery?

@Bubsy_Mods 6 лет назад

Yep! You can use the board from the original Sony battery

@pavichokche 5 лет назад

@@dcgyb Of course it matters. On my original battery, the negative (black cable) of the battery is connected to the point that sticks out of the pcb, and the positive (red) is connected to the point on the side opposite the connector that plugs into the psp.

@abbason5064 6 лет назад

Do you know how to get thumbnails on psp viedos ??? Cool mod I did a battey mod myself

@abbason5064 6 лет назад

I just have a 3.7 800mah I upcycled from a Bluetooth speaker in the udm door it looks super good. Yours is nicer tho Kudos good job

@Bubsy_Mods 6 лет назад

Awesomeness bro!

@abbason5064 6 лет назад

Bubsy ? How long dose your psp stay charged with the battery mod ? Mine rocks all day and I have a pretty small battery

@Bubsy_Mods 6 лет назад

On and off playing, couple of days. Never did a non-stop gameplay.

@silentshadowPT 5 лет назад

Nice mod, but i wonder, can you tell where to get that cps1 and cps2 version ?, i searched all over for that images but cant seem to find it.

@Bubsy_Mods 5 лет назад

Here are the eboot.pbp files: mega.nz/#!bCBWkQCZ!Z1KsXbxA6JUCCPL7AaZPTuS-FE_p9RDGIG3cULhGmnk I've included CPS-1, CPS-2, neo-geo mvs, and neo-geo cdz. Enjoy!

@silentshadowPT 5 лет назад

@@Bubsy_Mods Thanks, you are awsome, btw i noticed the CPS1 and 2 where the 2.5.1 versions i updated it to 2.3.5 and uploaded it for you if you want it ufile.io/7znw3

@derschakal718 3 года назад

I got the exact same fake 3600 battery, but it doesn't work, not powering the psp at all. But will the pcb board still work?

@Bubsy_Mods 3 года назад

Yeah you can use that pcb board and go about the procedure 👍

@topnotch9689 5 лет назад

hey I know this an old video but I did this mod and for some reason the PSP does not recognize the battery. the orange light turns on but will not charge. PSP dies immediately after removing power cord. any help?

@Bubsy_Mods 5 лет назад

The 3rd party psp circuit board probably fail and is doing that. Get another psp circuit board and solder it with the lipo battery.

@error346 Год назад

Could I connect a bigger one? like 6700mah, it would be charged? or I need an external charger?

@Bubsy_Mods Год назад

You could, if the sizing is well suited to fit into the PSP housing.

@PoilQC 2 года назад

Incredible tutorial! Do you think that it's possible to fit a battery with these specs: Width 60mm Length 115mm Thick 10mm ? I just found a spare portable charger and idk if the battery would fit. Thanks

@Bubsy_Mods 2 года назад

Thank you. Much appreciated 😊. If you are going to use those above specs on that type of battery, you might need a rotary cutter to cut out some of the internal & side plastic parts of the psp. That's why I used the battery in the tutorial to fit perfectly.

@PoilQC 2 года назад

Little update: I bought the same sized battery since the one I had would not fit and everything is all good! Again thanks for sharing your knowledge :)

@Bubsy_Mods 2 года назад

@@PoilQC Much appreciated, thank you for the kind gesture. I'm glad everything worked as planned 😊

@yavori4013 5 лет назад

I use the same battery as yours, but when is suppose to charge I hear strange clicking noise, and doesn't looks like it's charging when it's on. No idea is it charging at all

@Bubsy_Mods 5 лет назад

Clicking??? That's weird 🤔 Never heard any clicking noise before. I would just in case check your connection to be safe. Also do you get any brown outs at where you live and/or if your electricity is regulated.

@LuisPerez-id5ce 3 года назад

I've heard that when you just remove the UMD the PSP stays in loading mode unless you cut the flex cables so the PSP thinks there is a UMD drive installed, is this true?

@RedNoise-hz5nh 2 года назад

i dont think so, i removed mine cuz it was broken and it works just fine

@macbrebonicks8668 3 года назад

Can it be modified to use new external battery packs?

@kellylucas2633 3 года назад

Im going to try this. My brand new battery from Amazon only last 40'mins at best on a full charge so I need this for sure. Got to jail break my psp tho first to see if I can do it then ill get rid of the umd drive

@Bubsy_Mods 3 года назад

Sweet! Enjoy the project 👍

@AmpliFreQuency 5 лет назад

Update: My PSPs came in and I've successfully did the mod on my 3000 following your guide! Just a heads up: if anyone's thinking of what battery PCB to use, don't use the official 2000/3000 battery PCB unless the height of the battery is smaller than 3-4mm. As shown here, I could not get it to sit flush at all with a 4000mAh battery (5mm height), and trying to put the battery door on put quite a bit of pressure on the battery due to the chips on the PCB being on the underside : i.imgur.com/P2JOjjo.jpg I switched to the official 1000 battery PCB since its cell was bloated, and it laid perfectly on the battery with the door put back on: i.imgur.com/2Tup9JL.jpg End result: 10+ hours battery time! i.imgur.com/j35OIyP.jpg

@Bubsy_Mods 5 лет назад

Great job mate👍 Outstanding work!

@DS-os1sy 5 лет назад

Tommy yus

@CYDeviant 6 лет назад

I did this and my psp charging light is blinking orange. It still turns on fine with power from the wall, but the battery isn't taking a charge, and the psp dies if you unplug it. The battery tests at 3.80v so I think it's good. I'm guessing it's the charge controller circuit, but I'm not sure. I'd love someone else opinion.

@Bubsy_Mods 6 лет назад

If the charge light is blinking, check if you soldered the wires from the lipo battery to the + and - correctly onto the psp battery circuit board. Also check if the circuit board is not damaged. When charging it should be a solid orange on your psp. Now keep in mind because your using a 3000 mAh battery, charge times could take up to 4 to 5 hours (or more). But the play time will last for hours. There was a time when I calculated, the battery lasted me for 10 hours. Hope that helps.

@zxzx5234 6 лет назад

Hello! Will this battery length-89mm width-52mm thick-6.2mm be adequate for the shell? Thanks!

@Bubsy_Mods 6 лет назад

That should work too!

@Thepragtisme 6 лет назад

I'm doing battery mod. It's charging, but when i turn it on the display shows like it's loading (circling around at right corner) after "Sony Computer.......". What could be wrong with this?

@Bubsy_Mods 6 лет назад

That's depending on your memory stick. Either the memory stick speed is slow, or it's corrupted and you need to reformat the card with your psp and reload the games onto your card again.

@Thepragtisme 6 лет назад

Bubsy thx for the reply. I've solved the problem. Using noumd.prx solved the issue. Anyway thank you for the video tutorial. I've successfully replaced the battery with 2500mah li-po.

@Bubsy_Mods 6 лет назад

Awesome!

@johnnyjoestar8725 4 года назад

Where did you get your psx games from? Plz I want to get Castlevania SOTN

@Bubsy_Mods 4 года назад

So what I did was, I got the psx rom and used a psp eboot converter in which I customized the background and icon image as well as adding .at3 audio track in loop.

@johnnyjoestar8725 4 года назад

I did that as well but when I tried going in the game it didn't work.

@johnnyjoestar8725 4 года назад

Can you make a video showing how to convert and customize psx roms?

@Bubsy_Mods 4 года назад

@@johnnyjoestar8725 That is definitely a great idea! I'II do that in the future! In the meantime enjoy the SOTN link below, just put it in your PSP directory ;) mega.nz/file/SDok1KLa#dIVGqHIBhlpWVzVK_yCzRJPVg3MmhGwL5uknptmSfTk

@johnnyjoestar8725 4 года назад

Bubsy THANK YOU VERY MUCH! You just made my day!

@valenciodiaz2644 4 года назад

Can I use a higher mah of battery in this mod? Like 3000 to 4000mah(battery for newer phones like s8 plus) because I have an old battery Thanks in advance

@Bubsy_Mods 4 года назад

You could. As long as it fits inside your psp

@TheManOfMuscle 3 года назад

Is it safe to remove the pcb from a psp battery that's bloated?

@TimothyTimPSP 4 года назад

KMD makes 2600 MAH psp batteries. They work great! Just don't charge them over USB data connection. No need to violate your psp. If you don't want to.

@richmondr1454 4 года назад

why when several switching of different batteries after soldering still I got no more than 2hrs. of psp used why just can't exceed at least up to 5-6 hrs. anyway i'm using not the original pcb eventhough I charged overnight and still no luck.

@Bubsy_Mods 4 года назад

Are the lipo batteries duds?

@sissyphus2926 4 года назад

Will removeing all that stuff from the PSP stop it from playing the games from their discs? Is it even something I should be concerned about I mean I presume at this point most people just download games onto their PSPs and don't need discs right?

@Bubsy_Mods 4 года назад

Or convert the UMD's into digital iso and than transfer them over to your memory card.

@CotyRiddle 3 года назад

@@Bubsy_Mods which also uses less power LOL

@RaulAyanami 4 года назад

hey mate, i need to know if this supports usb charging. BTW i still have an original pcb also chinese pcbs

@Bubsy_Mods 4 года назад

USB charging was for the 2000 and 3000 models

@chamoo232 4 года назад

I got a cheap chinese Ostent battery to use the board but to my surprise that battery was actually working pretty decently. 1200mah slim battery and I was able to get 2 hours out of it. I decided to keep it and use one of my old bulged original 1800mah battery. The problem I had was that the 3 connectors on the original Sony battery are 3 little pins soldered directly to the traces on the board. I ended up bending them a bit while opening the battery and it ripped the trace right off the board. The cheap chinese battery's pins are a lot sturdier so I ended up gutting my Ostent battery to do the mod. The chinese battery pins are a lot better for this mod. They pinch the pins in the PSP and hold very securely.

@RaulAyanami 4 года назад

@@Bubsy_Mods yeah, but every chinese battery dies if i try to charge it via usb

@akt9493 5 лет назад

Can i use Li-Ion Battery instead of LIpo? i have Li-ion battery 2000mah sitting around my room.

@Bubsy_Mods 5 лет назад

Sure👍

@robertofontana313 6 лет назад

If I were to take the power circuit board from a Pandorized battery, would this big battery still be recognized as such?

@Bubsy_Mods 6 лет назад

Yeah that should be no problem! Aaaaaah the Pandora days, so long ago lol

@obyboby2285 6 лет назад

Dude it's me I just switched account, thanks for replying and yeah, I am asking because I've thrown away my old Pandora but I figured I could still use the board inside! :D LOL I'm pretty sure I pandorized that battery somewhere like 10 years ago and never changed it since. Recently bought a couple PSPs and would like to try out some mods. Now I just have to find that battery :D

@Bubsy_Mods 6 лет назад

LOL!!!

@LucaBlightOfHighland 3 года назад

can i use an original battery instead of the aftermarket one as circuit board donor?

@Bubsy_Mods 3 года назад

That's fine 👍

@CotyRiddle 3 года назад

@@Bubsy_Mods "actually better"

@RoanokeCadenzaVODs 3 года назад

I wanna do this but I collect UMDs and I test them. Is it possible to do this with a smaller battery?

@Bubsy_Mods 3 года назад

You could if you want to attach the battery externally onto the back of the UMD door🤔

@RoanokeCadenzaVODs 3 года назад

@@Bubsy_Mods won't be as pretty but it could work...

@Bubsy_Mods 3 года назад

@@RoanokeCadenzaVODs yeah I know. That is why I had to sacrifice the UMD drive in order for it to look clean and to fit the large capacity battery.

@justinmontilla5531 4 года назад

pls reply! if i completely removed the umd drive like you did on my PSP 3003, would it still work? im planning on changing the shell / housing of my psp and the umd part just seems too hard to disassemble. i have costom firmware anyways, i would really appreciate an answer from anyone who's sure of this. thanks!

@Bubsy_Mods 4 года назад

Well it's been working for years without the umd drive. I removed it because of the positioning of the battery. Take your time with the disassembly. If you're worried of doing it, then don't do it. Listen I've seen some difficult mods out there. This one is a piece of cake. You can do it😉

@justinmontilla5531 4 года назад

Bubsy thankyou!!

@CotyRiddle 3 года назад

psp does no check for the umd drive. pull it off and boot it up. It is actually a popular mod for them as some people even hack in a card reader.

@themindofmoment8778 3 года назад

What's the music that was playing around 34:37 ?

@Bubsy_Mods 3 года назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XSXdGy44SeQ.html

@CliffMoore 3 года назад

Not bad on your tutorial but I would recommend using some kapton on tape properly secure it it's the same tape that's on the end of your battery and it's non-conductive

@anjolapixels3109 Год назад

i personally bought an original psp battery for the 2000 model i have from a friend and when its 100% charged it gives me 7hours and 30 minutes of play time , its notbad but it could be better , also i have a huge problem with the display and its damaged , and where i live theres no way i could find a display for it , even if i did it will be from a retailer and it will cost me between 20-33 us dollars to just get the display :'))