Quick MOTOFABLift Leveling Kit Install for 07 - 19 Chevy Silverado/GMC Sierra

Подписаться 5 тыс.

Просмотров 12 тыс.

50% 1

Today on DIYWilly, We install 2.5” leveling kit from MOTOFABLIFTS on a 2011 Chevy Silverado.
So follow along as we continue to repair and upgrade the 2011 Chevy Silverado.
*If you found this video helpful PLEASE consider donating by using the $Thanks-Tab$ located below the video, allowing me to continue making these types of videos.
Thanks for watching and enjoy the video....
Hit that Subscribe Button.....
Parts Used (Affiliate Links):
MotoFab Lifts 2.5 front leveling lift kit….amzn.to/3F6rXQz
MOTOFABLIFTS…. motofablifts.com/
Torque Specs:
Outer Tie-Rod End….26ft-lbs
Upper Ball joint….37Ft-lbs
Strut (Coilover) Upper and Lower bolts….37ft-lbs
Please Subscribe, Give the video a thumb up, leave a comment and please share these videos.
You can reach me at: diywilliyprojects@gmail.com
Filmed with a GoPro Hero 7 silver
Edited with DaVinci Resolve 17
Music Provided By..
WWW.Bensound.com
Disclaimer: I am not sponsored by any of the products I use in my videos. I pay for everything with my own hard earned cash.
These videos are intended for entertainment only.
#MotoFab #ChevySilverado #5.3 #LS #Levelingkit

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@ocotillooutlaws4101 2 года назад

No more stink bug look! Nice install. Good option if you don't want to do a full lift. Thanks for sharing 😎

@DIYWilly 2 года назад

This truck was lowered in the back. I replaced the shackles back to stock raising it back to stock height. I didn’t show that. But with this install the truck looks good. The front looks higher now then the back should have been level.

@richr2979 5 месяцев назад

Great vid, thanks for torque specs.

@DIYWilly 5 месяцев назад

Hello Rich, Glad you liked it. Thanks for watching!!

@toddwilliams9552 Год назад

Just received mine in mail gonna install tomorrow thanks for video buddy right down to point and clearly explained thank you

@DIYWilly Год назад

Alright that’s going to be fun. Let me know how it turns out. Thanks for watching!

@rodrigoibarrajr4920 10 месяцев назад

Do a video of doing the headlights cleaning

@DIYWilly 10 месяцев назад

Hello Rodrigo, I have been planning on a video showing the process I use to clean the headlights. Thanks for watching!!

@lmontes09 11 месяцев назад

Great video! I'm getting ready to tackle this job so thanks for posting. Why did you opt for the "donut" type top spacer rather than the "C" type bottom spacer? Is there a performance or safety concern I should know?

@DIYWilly 11 месяцев назад

Hello Leo, I chose to use the “donut” type over the “c” at the bottom only because I like the size of it. Both types will achieve the same result. Good luck on your installation. Thanks for watching!!

@gumbo4743 Год назад

Good vid. I have the same moto fab spacers but mine is a 3 inch. Will I need new control arms for my 3 inch spacers?

@DIYWilly Год назад

Hello Gumbo, The Chevys are notorious for having alignment issues and staying aligned. ( So I’ve been told ) I have the 2.5 lift and keep the tires rotated but still get issues with uneven tread wear. With 3” lift I would recommend getting new upper control arms to help keep the factory front geometry. It will also help with premature upper ball joint wear. Hope this helps and thanks for watching!

@heathenprojects2639 2 года назад

I need to do this to my obs my 31 clear but rub at full lock I don't off road it past a field or 2 it's the winter beater

@DIYWilly 2 года назад

I’ve had the same kit on my truck for a few years now and it definitely helps with tire clearance.

@KaliBlaz 29 дней назад

did your ball joints snap yet after 2 years?

@DIYWilly 29 дней назад

Hello kaliBlaz, No I haven’t had a problem with ball joints on either truck that installed this kit on. Everything including alignment has been fine. Have you had a problem with this type of lift? Thanks for watching!!!

@jsagil6785 Год назад

So I Don’t need to remove the rotar and calipers??? 😮

@DIYWilly Год назад

Hello JSagil, It’s not necessary as you saw in the video as long as you support it to keep from putting tension on the lines. Or if your more comfortable with removing them that would be fine too. It’s up to you. Thanks for watching!!!

@andrewsenechal7123 Год назад

Can’t get the strut assembly back on. Holes won’t line up and can’t turn the gasket in the shock to line the holes up

@DIYWilly Год назад

Hello Andrew, You’ll have to rotate the strut to line up the holes. Then if the bottom holes don’t line then also rotate the bottom of the shock to fit. Fit the top first.. Hope this helps and Thanks for watching!!!

@AnGryCruizer 2 года назад

always use a tire chuck !!!!

@DIYWilly 2 года назад

Always block the tires. Never no one something might move

@AnGryCruizer 2 года назад

what u think is better ford or chevy i know chevy but

@DIYWilly 2 года назад

I’m a Chevy or Nissan guy all day!!

@AnGryCruizer 2 года назад

@@DIYWilly they got this ford explorer for 500 bucks i need a car lol

@AnGryCruizer 2 года назад

@@DIYWilly btw i posted the vid for u just now of the ducar feel free to watch

@DIYWilly 2 года назад

If you need a car. Checkout the engine usuals and tranny. $500 is affordable

@DIYWilly 2 года назад

I’ll check it out dude

@SerrAvid Год назад

Almost the same process of a 01 chevy silverado?

@DIYWilly Год назад

Hello David. If you have a 2wd truck the process is similar only your truck would require a coil spring spacer. In the video I used a coil over (Strut) spacer. Two different lift spacers. You would need to compress your spring, instal the spacer on the top of the spring and then carefully remove the tension on the spring and seat the spring and new spacer. Hope this helps! Thanks for watching!

@jondoough 2 года назад

do you get death wobble?

@DIYWilly 2 года назад

Hello John, no death wobble. Everything is perfect. I’ve had the same kit on my Silverado for years with no issues. I will say though that these Silverados are hard on the alignment and this mod does make it more difficult. So find a good reputable shop to correctly do the alignment.

@JoseGonzalez-jn1uy 5 месяцев назад

Did you have to put after market upper control arms?

@DIYWilly 5 месяцев назад

No it’s not needed. But with that said the Silverado is prone to alignment issues and quality aftermarket upper arms would help with that. I did not install upper arms and I just rotate my tires and have alignment checked when I see something odd. Thanks for watching!!

@I.s88ac Год назад

So what about the back? Did you change the lift blocks?

@DIYWilly Год назад

Hello l.s88ac, No I did not change anything on the back. The truck was actually lowered and I did reinstall the factory parts before adding the leveling kit. Thanks watching!!

@I.s88ac Год назад

@@DIYWilly oh alright thanks for replying

@DIYWilly Год назад

You got it!!