r/Dangerousdesign | one. wrong. move... 

Hhhhhhhh

eeeeeeeeee

uuuuuuuuuuuuuuuuuuuuuuuuu

aaaaaaaaaaaaaaaaaaaaaaa

Gggggggggggggggggggg

One of those things where's dangerous when used incorrectly. Rather than being dangerous by existing lmao.

@@LitoraLee very true. Ah, the folly of man....and not knowing how to do things sometimes, lol

Wow, these pigeons are getting smarter every day!

@@southernflatland as a pigeon, can confirm

Straight from the United States Department of Labor Occupational Safety and Health Administration's (OSHA) FAQ: *If my workplace is unsafe, what can I do?* If you believe working conditions are unsafe or unhealthful, we recommend that you bring the conditions to your employer's attention. At any time, a worker may file a complaint with OSHA to report a hazardous working condition and request an inspection. If the condition clearly presents a risk of death or serious physical harm and there is not enough time for OSHA to inspect, the worker may have a legal right to refuse to work. I got the following from a short on @Law By Mike's youtube channel: You may refuse to work but don't leave unless your boss says you may.

In the U.S., it's a bit more complicated thanks to the overlap between state and federal law, but generally, the OP would have been fully backed by the law of they refused to work with unsafe equipment.

Iirc that's a thing in the US too

Workers don't have rights here, for it is a privilege to work in the first place. Conservatives are insane.

Technically you do in the US, too. Technically.

indeed but by the culture of electricians they would try to hide those wires better anyways because stepping barefoot on them could still hurt someone lego style due to the metal rings ;-;

You can't tell me what to do. I'll touch all the wires!

Came to post this

Best to hire a professional (certified) electrician in the first place tbh. Or at least someone who knows better than to leave ANY exposed wiring poking into a shower in the first place.

Just attach a voltmeter/ammeter

The first version used piano wire.

@@tech34756 ...what?

@@IWontListen2You Yeah, the first version used piano wire to disasterous results. /s

@@tech34756 dang, that's like, professional assassination while the public can see but is unaware

atleast have the cars have a tunnel soo there aint a hour long traffic each time a plane lands down

It’s actually okay because they have the signals like for trains

They could literally put a tunnel underground underneath the runway

​@@LoneBeastYT you don't realize how that would paralyze the whole transportations in there now do you.

@@fallout8516 the Gibraltar airport can’t be that busy.

I have 2 braincells rn and trying to figure out what your saying

I would probably get a doormat

@@ThislittleguymovedChannels The thumbnail, he's talking of the thumbnail

Nvm

Where are the keys? Oh I slid them under the mat.

Yeah I thought it said look alert for a sec too

*cough* tunnel *cough*

@@claytondavidson2192 not enough room pn either side of the runway to have the ramps up and down, on one side is the mountain and on the other side is the Spanish border.

@@claytondavidson2192 Lack of ramp space and having a tunnel below a runway isn’t ideal

@@the_victorious_1 There is clearly enough room visible in the image for an underpass style tunnel. what the fuck are you talking about not enough room

@@justanotheryoutubechannel AND HAVING THE CARS DRIVE THROUGH THE PATH OF A FUCKING 747 IS????

If only there was some way to sew materials together in a way that didn't suggest it can be opened

@@fromthegamethrone yea I can imagine it now, one day there will be a day when we could keep items together without it being openable, almost like an imaginary line of sealant.

I looked up apparently it's just a bad mattress company. With most of the complaints being of moldy mattresses.

Having been to that actual page, that specific mattress is sold and advertised as having a removable cover for ease of washing.

Is it a bed mattress? I have never seen one made of fiberglass then

It's probably painted that way to slow down traffic. The best way to make roads safer is to make them seem more dangerous.

@@wta1518 It wasn't painted correctly, so they plan on fixing it. Knowing how the town is, it will take several years before they actually fix it

Who the hell starts a conversation like that i just sat down.

Bro this ain't r/trueoffmychest ☠️

Just say that you're voice acting for something

isn't this from a tumblr post?

@@lanturn3239 idk is it?

yes, it need to takes for an hour even a taxi..

No accidents was pure luck. And so many tightly packed neighborhoods underneath it. One accident would be the equivalent of several elsewhere. And the noise for people living under it must have been deafening. No win, guys. If you can afford to fly you can afford to take the taxi.

Hear me out, anyone remember call of duty black ops 1, the mission in Hong Kong where the plane flies over your head. It was cool

@@gl15col don't be ignorant

@@pb6198 how the hell is that ignorant, vs you ignoring the fact that everyone in this city had to deal with plane sounds being literally a hundred feet above them and *echoing off each building*. I'd be surprised if there wasn't a window broken from the sound waves at least once a month.

It's generally a dial selector for an automatic transmission. So it's a PRND selector, not a gear shifter. Frankly I wouldn't be too worried about the owner/driver of the car. I'd be more worried about a passenger who doesn't drive and randomly decides to turn up the volume on the radio, or switch the station, or something like that.

I'm fairly certain manufacturers would've thought of it beforehand and won't allow you to switch gears when in motion

@@PHAZER99 That would help, but doesn't really solve the problem

@@PHAZER99 it's also about shifting from D to N at speed. I've only had 1 car that required the driver to have their foot on the brake to shift into N and that was an early generation robotised manual gearbox. All of the automatics I've owned allowed you to shift from D to N with the vehicle in motion, some of them allowed shifting down from D to a lower gear without a foot on the brake. My current car does the same. I can shift from D to N or S while in motion even at speed.

I agree

I read this comment in a Australian accent

42nd 👍

Yeah permanent above ground pools (with a level area to rest and bask and whatnot) with views like that are godly, and I can't even swim! Seriously though, I didn't notice the pole at first

@@reapertown9267 Well, that's good because I'm Australian

Two even

Or two

same

same

sames

Yes

On a other note the mattress one well they have zippers because they manufacture the covers of the mattress and the mattress springs etc in different facilities. The reason why the zipper exists is so it can go around the mattress part. This is cheaper.than making a solid unremovable cover for said matress

The Kai Tak Airport was built when the area was the middle of nowhere, but as Hong Kong grew it got it enveloped, but there were strict rules limiting building heights around it.

Yeah we did, it fits with the theme of being a motor town. They took advantage of the mistake to make something fun. We are also known for our annual Biker Ralley

@@Colindalugia I’m aware

@@Colindalugia but I still think it’s funny

To be fair that was done by the smartest minds on Earth not your average human.

You do realize it took fifteen tries just to get a rocket that wouldn't instantly explode, and another twenty before it lifted successfully off, right? We are smart, but we get things wrong literally all the time due to lack of foresight and not considering things while planning or even not realizing something needs considering until it's far too late to fix or change it. We discover what we haven't thought of the hard way, through trial and error. Even the smartest of us. That's why the saying 'Safety regulations are written in blood.' exists. We often don't know something is going to go wrong or has gone wrong at the planning stage until the disastrous results unfold. With the runway highway, nobody bothered to check their heading or a map and simply continued in the wrong direction until hundreds of millions of dollars were invested into that highway that they didn't realize was going to cut through the runway and not run past it when they started work however many miles away. Because they blew the money in the screw up, they don't have enough money to fix it now.

At some point greed and laziness become stupidity.

"I tripped because I didn't watch out, now I will sue the doctor", its entirely your fault if you fall over that and its just dumb and childish to sue the doctor or the hospital.

@@voidbite yea your rigth

that's definitely better than trying to turn down a song and parking on accident

It's another car:) Lada is more angular, and even if it was it would be 2108, since it's three-door.

Maybe you should talk to somebody at OSHA, that sounds like they knew they were doing something illegal and didn't want any evidence if they got inspected.

@@gl15col I am australian we dont have OSHA. its all good now we got like 2 new boxes of new gloves to replace the crappy ones but there still the same brand and don't keep the heat out well, but you cant expect more from a fast food restaurant anyways.

High voltage lines are typically not insulated and are made of braded cable. And it looks too thin to be insulated with 3-inch-thick rubber. This is likely a telecommunication cable. Those are insulated. I'd say it's not uncommon to see those droop down that low. Telecom companies seem to not bother with those until they're in the way of traffic or something. But never have I seen a live HV line hang that low.

Those are ground wires and therefore safe

The pile of bricks looked like it could be kicked over though... it was so thin

@@peter_kitsune believe me they are so compressed you would break your feet on them. The whole weight pressing down on them is so strong if anything was to go wrong it would be at the sole begining when they lied these bricks. To take a brick off the pile you wpuld need to have a strenght to rip it from under tons of weight. Many places do use bricks like this to support heavy weights due to their accesibility and strenght. They were made with this purpose. Iif they put something like cement i between the cracks no one would say that it looks innaproperiate for them to use it as a support while i will suprise you by saying the weakes part of a brick wall is the cement itself. As dangerous as it looks due to me seeing many of these instances i can assure you its really rare for it to fail. Tho it does make you nope out if you dont understand the physics making it possible. I can see why it looks bad >

No one would hide stuff in THAT matress, tho, cos of the fibreglass dust Which defeats your point. Stop commenting "just to be contrary"

@@danielcrafter9349 "That" matress is under regulations that are put over EVERY matress. Go to school and don't try acting smart online. This point is so simple it defeats itself. Also ever used those lil plastic bags? Yes they do fit nicely in those because they have viberglass. Hiding something in them is more than probable if you dont open it wide. Only enough to acces the inside in a long rubber glove. If you were smarter you would figure it all out yourself. You decided to be a moron and try offend someone making yourself look as stupid as possible in the process.

@@danielcrafter9349 People can open it not in their house, and put stuff in it, its a safety measure, and even tho alot of people probably wouldn't hide something in there, a thief might actually, as that fiber glass will not enter their house if they don't open it in their house, its like saying its bad to make guns illegal to be carried outside becouse people won't kill, but you have a couple of psychopaths that do.

If it’s in the us you most likely can’t, according to the fda something is „sugar free“ if it’s less than 1 gram of sugar per serving, tic tacs for example are almost pure sugar but legally „sugar free“ due to them being so small

@@katiequeen722516 grams is more than 1 lmao

@@katiequeen7225 but for that brand then yes because it has 16 grams of sugar

✨capitalism and greed✨ What I would give for a truly socialist society

Tbf it's not like they can just generate homes out of existence it takes a while

Being single is fine, I know that feeling, it sucks wanting to feel loved and having too much to give but failing to find someone who even acknowledge that you are worthy of love, but in the end it is not something worth stressing about, take care of yourself, learn to enjoy simple things and keep on keeping on, you are way more likely to find a partner when you are alone and happy. And even if you find love tomorrow, you have to love yourself, otherwise you might become codependent and being codependent is a great way to scare away the people you love and end up even sadder when they leave. TLDR: Be strong, be patient, Love yourself, you'll be fine

The other side would probably also poke you even if rounder