Ram 2500 Fender Flares - My Thoughts and Install Tips - Bushwacker Power Wagon Style - Overland

Подписаться 9 тыс.

Просмотров 15 тыс.

50% 1

These fender flares are pricey, but it might just change the entire look of the truck.
Bushwacker OE Style Fender Flares
amzn.to/3EInWzI
Black U Channel
amzn.to/3q1wJZw
Ram 2500 Build Series
Ram 2500 Build Series:
Ram 2500 - Wiring Light Bar to Snow Chief Group
• Ram 2500 - Wiring Ligh...
12,000 LB Winch on a Budget
• 12,000 LB Winch on a B...
Westin HDX Pro Rear Bumper Install
• 2021 Ram 2500 - Westin...
Installing Everything!
• 2021 Ram 2500 - Instal...
All The Gear I Need To Install
• All The Gear For My Ra...
35" Tires Are A Ripoff:
• 35" Tires Are A Ripoff...

Авто/Мото

Опубликовано:

3 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@BeerWineandShine Год назад

As a mechanic. Way you install flares With the 3M sticky strips. Is you fasten the strip to the flare, But leave the Plastic film On the truck side of The adhesive strip. Just dog year one corner Of the film. Then you install the flare Without it sticking to the truck. Didn't want it in place Grab the dog year of the film And put out working your way around the flare. If you press the flare to the body to stick it and you're done

@arniehelsing550 Год назад

Great comments thank you for all the specific details. After seeing everything you dealt with I am planning to return my flares today.

@adamtaylor5590 2 года назад

Nick great video and those flares look good for non OEM I like them and the u-channel seal you installed looks to be a nice fit and a hell of a lot easier to deal with so far I’m liking what your doing looks great 👍🏻 ironically on the OEM flares the first thing they tell you to do is remove stone guard trim pieces and I agree it looks fine without them.

@roberta.k4213 2 года назад

Looks good 👍

@jmich5123 Год назад

Thanks for the video and channel content! For those watching who own 22 Super Duty, you don’t need to remove the mud guards, I installed mine today and expected to remove them but. The flares fit…

@Pinpon-ni8vc Год назад

Great video, I just bought a set of flares and had to paint the with ROST-OLEUM rugged black and they look better for my taste. As they came like the delivery person was dragging them 😂

@NickMango Год назад

Haha well glad it worked out in the end 👍

@on4acres 2 года назад

You should get a diamond back truck cover. I have the same truck and it’s been great, especially for camping.

@brianmccollough1264 Год назад

Love the videos. I’ve used what you’ve learned to build my 2022 Hemi Tradesman. So far I’ve installed the Thurmen 2 inch kit, the Carli high mount stabilizer and Cooper 295/79r18 tires on Method 18x9 wheels. Rides and drives great. Quick question, do the Bushwacker flares stick out far enough to keep mud off the side of the truck. I’m trying to decided between those and factory power wagon flares.

@NickMango Год назад

Not at that size of the tire. Those flares are very low profile. Mainly just for looks. You’d need to crazy big ones that stick out like 3”+. Good luck with the truck 👍.

@MrDubbindan 2 года назад

This is exactly the video that I needed to see ! I've been going back and forth on ordering these...

@NickMango 2 года назад

I like them a lot 👍

@bradshouseful 2 года назад

Thanks for another great video. I have a 2021 2500 and grabbed a set of OEM fender flares off Marketplace from someone you upgraded to larger flares. Do you think there is an issue with the flares with scratching or rubbing the paint prior to putting on the rubber seal?

@NickMango 2 года назад

Great question. I had them on for at least a week. I didn’t see a problem. It’s difficult for plastic to screw up the paint. BUT there’s a chance that dirt gets caught between the flare and the fender. Then you could possibly have an issue. Keep it clean and order that U channel as soon as you can. The one I used was like $35 with tax I think. Good luck with the truck 👍.

@bradshouseful 2 года назад

Thanks for the information. I actually just installed my fender flares with a "C" channel rubber seal. One note for easy installation, if you have a flexible impact extension you can basically get every fastener off with the impact. For anyone interested if you buy Ram OEM fender flares the mud "mitts" (lol) will have to be cut and notched to fit the OEM fender flares as well. This is because the trademen models have a longer mud guard that runs up higher on the fender wells.

@NickMango 2 года назад

Thanks BR! 👍👍

@danschaller1628 Год назад

Great video! Boy how the prices have gone up now though. I just ordered front flares for $362 and rear flares for $270 from American Truckers. Definitely not cheap for a few pieces of plastic that I hope aren't scratched up and actually fit our new 2023 Ram 2500.

@NickMango Год назад

Hey Dan, if you click the link in the description it goes to Amazon and they’re still $400 over there. Maybe you bought different ones?

@danschaller1628 Год назад

@@NickMango Darn! I didn't buy those since it states: "These do not fit 2023 Ram 2500" I'm sure they probably haven't updated their fit-ment info or something.

@danschaller1628 Год назад

Even Bushwacker's website doesn't list a set of four for sale for a 2023 Ram 2500. Ugh!

@danschaller1628 Год назад

@@NickMango II put the Bushwacker OE flares on yesterday. They look great but the Husky mud flaps didn't match the contour at all. Have to send the flaps back. I'm looking at purchasing Gatorback mud flaps to see if they look good with the new OE flares.

@RadioSilence-vs5hn 2 года назад

I’m wondering what else you got in store for your truck. Everything look good bro. Any interior upgrades?

@NickMango 2 года назад

So I would call this stage 1. I have big plans for the bed area (stage 2). The interior I’m not sure about yet. I never really like to spend serious $$$$ on looks so it would have to be useful. I’m still thinking on that. Thanks 👍

@anthonysoccorso824 2 года назад

Did your flares have foam on the inside of them when you received them? Should that foam be removed? Is there anything other than the U channel gasket between the flare and the fender?

@NickMango 2 года назад

No foam on mine. Probably just there to try and prevent scratching. I’d remove it. Nothing but the rubber gasket. Thanks

@aaronhulst2233 Год назад

How much of the u-channel did you use per wheel? Looks like they don't sell in 15' lengths anymore. Did you end up putting on any clear coat protector tape? Thanks!

@NickMango Год назад

You need to 15’ pieces. If they don’t sell the 15’ sections you might have an issue. I don’t know if 10’ will do two flares. I’ll try and look tomorrow and see what the length is. I didn’t put any tape either thanks 👍.

@bdhays63 2 года назад

I like the flares but won’t they catch dirt and salt under them just like the mud guards?

@NickMango 2 года назад

You know, I did think of that. Only time will tell, but I believe since it’s higher up and has that rubber u channel on it, it might catch less. I’m going to remove them in a bit to do a ceramic coating. I’ll know more then. The cool thing is that come off super easy. The mud guards are actually very annoying to take off and on. Thanks 👍

@irvingsebastian659 2 года назад

You should have gone to the dodge dealership got the power wagon fender flares oem would have cost you about $220 out the door just snap a vin from the same year truck

@NickMango 2 года назад

They stick out too far and they aren’t completely smooth. I like these better. Thanks 👍

@chrisk164 2 года назад

Yes those are rust makers...

@ronstinsmanjr8242 2 года назад

I put a set like this on my 18 1500. When I got tired of them and took them off there was a nice outline of removed clear coat. Just suggesting to check on them pretty often

@charlesholbrook8428 2 года назад

To each their own I’m not a fan of the mud guards or the wheels seems too high for that small of tires. bumpers and the rest seem to work again just not my style.