REDI WALL --- Strongest Tile Backerboard I've Used!!!

Подписаться 275 тыс.

Просмотров 25 тыс.

50% 1

Redi Wall and Tile Redi pans eliminate the vulnerable failure points of other shower pan systems like Schluter Kerdi, Wedi, Hydroblock and Redgard. In those systems, the pan and wall connection is at or below the waterline of the shower and are often just connected in the field with sealant or thinset. Also, the drain is a separate piece and has to be secured to the pan with thinset or sealant. Installer error is common with these systems leading to catastrophic water and structural damage.
Tile Redi pans are one piece, pre-sloped, and have the drain integrated into the pan through the injection molding process. The integrated splash walls and curb make it so there are no connection points in the field at the vulnerable waterline.
For more info on Tile Redi products, select the links below:
Redi Trench: tileredi.co/3ZXQp0p
Redi Base: tileredi.co/45AznGK
Custom Shower Pans: tileredi.co/3tHpGJu
Wall Solutions: tileredi.co/3tD8K6G
If you need help on your DIY shower project, I offer 1 on 1 tile coaching consultations. We use zoom or Facetime so I can see your project and offer you good advise on what methods and products are best suited for your job.
Click the link to find out more: www.tilecoach.com/book-online
To support our channel, please consider signing up for our Team Membership for $10 a month. Your membership allows you access to our community advice forum and exclusive zoom meetings. Here is the link:
www.tilecoach.com/plans-pricing
Other helpful links to other videos in this remodel:
• Tile Shower Wall with ... . (tile setting)
• Copper Pipes are Faili... (plumbing)
• How to Install Tile Re... (tile redi pan install)
• Fastest PEBBLE SHOWER ... . (pebble pan)
• Tile Shower Removal --... . (demo)

Развлечения

Опубликовано:

12 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 144

@martinc6273 4 месяца назад

It takes courage to open up to viewers about your past mental health. You are doing God’s work in more than one way.

@DJ-rq9qg 4 месяца назад

About to tear out a 60 year old ceramic sunken shower. My first time. I’m retired and slightly older than this old house. Wish me luck! Will try this product

@garrettsoto1667 3 месяца назад

Well? How’d it go

@potentetravels 3 месяца назад

Love watching and learning. The message about depression is big. Many of us, as men, think it's a weakness to admit.

@remodz6385 4 месяца назад

I love the tileready products! One thing I’m not sure why, but they don’t incorporate the same lap joint/overlap on the pan to wall connection. That would be a big plus

@davidprice7006 4 месяца назад

It looks like Tile Redi offers a flashing product that can be used at the wall to pan transition. I can't say if it would be any better than just using the glue alone as shown in the video. Has anyone tried the flashing?

@michaeldepow6663 4 месяца назад

@@davidprice7006I was told about it after my install. We used hardiboard and sealed it with red guard

@chrism2042 3 месяца назад

I purchased the wall flashing when I ordered my custom Tile redi pan, I wanted to eliminate all potential problems.

@AK-kn9lq 4 месяца назад

Isaac you’re a wonderful person and builder!

@FriedSpamAndChips 4 месяца назад

Lovely message at the end. Big fan of your videos mate, keep up the brilliant work.

@stevemullen8457 4 месяца назад

Thanks so much for showing the wall installation. I just got my pan done and will be doing the walls next week. Thanks for showing this new product.

@kailua808 4 месяца назад

coach been hitting the gym hard 💪💪💪

@EDHBlvd 3 месяца назад

Man that system looks foolproof. Awesome.

@herrrnn 4 месяца назад

Your the man tilecoach always great content

@Apexjasonmorganllc 4 месяца назад

That looks like a really solid setup. I wouldn’t mind trying that system. Nice video Isaac.

@keghamstepanian 3 месяца назад

Thanks for the positive words at the end of this video.

@user-xr1gj1er3s 4 месяца назад

More than the tile it was your comments at the end of your video that impressed me. I have struggled with anxiety for many many years. I’m a contractor in the north east and have run my own business for 39 years. I appreciate your kindness and willingness to help others. God bless you keep up the great work

@timmythecat7478 2 месяца назад

Really like that integrated pan !!!! They must be 'made to size". Very nice. Thx for the meaningful words at the end.......You are a good man................

@Theozman2 Месяц назад

You are an excellent teacher. I met with you on-line for a consult for my project in Indiana. Thank you for your work. God bless you.

@zardoz2627 4 месяца назад

This is definitely the system I will be using for my half finished master bathroom shower. I've been putting off doing it for... years

@curtisprice7133 4 месяца назад

I’m about to start a (new build) shower. I think I’ll try this.

@mr.p4293 Месяц назад

It looks great can’t wait to see it all tiled up and done. Maybe your next video

@philwell76 3 месяца назад

Man! I like that lap joint! I’m gonna try that next time…

@stevev3962 4 дня назад

Appreciate the videos. The various material selections are quite informing. I use the tile redi pans and benches with Kerdi walls and niches. Might have to check the redi wall panels. What you call the buzz saw is more properly called the " wiggle saw" in the field east coast...

@riccochet704 4 месяца назад

You been gettin those gains at the gym!

@hanko5750 4 месяца назад

That is very cool stuff!! Do appreciate!

@patrickflanagan8008 4 месяца назад

Bravo Sir...nice one

@scottschreiber6008 4 месяца назад

I do handyman work and I just bought the skil 12 volt brushless drill, my “trim” drill. You have so much trigger control instead of having to keep hitting the trigger of the impact. Just a suggestion. Great video.

@grassrunner7983 4 месяца назад

good work!!!

@oldguy1960 4 месяца назад

Awesome, I got a job I'll try that board on.

@theheartofhouse3977 4 месяца назад

Man I appreciate this video on so many levels from the Moving out of a State of stuckness or depression by actually moving the body as well as using this tile redi system. A long time ago when I first started tiling I used tile redi and I don't recall any wallboards with it. The system is great because of the integrated curb and everything However at that time I found it a little challenging especially when everything was not quite plum square and true. there is no modifying it. This video makes me want to go back and use it because of the level of Certainty. Thanks for your inspiration!

@Jamax99Jetfan 4 месяца назад

I think that pan is the future.

@ItsSurge 4 месяца назад

Nice

@roberthoward1155 4 месяца назад

As a home owner who had my installer use this system on a second floor shower, knowing that I don’t have to worry about a leak is worth every penny. We even used the metal flashing where the pan meets the wall.

@maryv5558 28 дней назад

Training course! Yes, please. Has this happened? Will there be another?

@lindamoser2532 4 месяца назад

I would recommend ear protection with that buzz buzz. I've had some issues with that tool

@ediaz8786 3 месяца назад

Hi Isaac, I love your work and the way you explain everything.I have question how did you waterproof the transition from the tile redi board to drywall?

@toddmccormick8363 4 месяца назад

Just one question Isaac, do you miss floating mortar walls?! Love ya brother, keep up the great videos.

@michaelmoreau1329 4 месяца назад

Awesome. I have a 54x40 on order along with the Redi Wall board and a niche. Can’t wait to try it out. Question: any reason you chose not to use their flashing? Also, how many tubes of the Redi Caulk did you use for installing what appears to be about six boards? I’ve ordered extra because it seems like you’d use more than the three tubes that are included - especially since I’ll be doing a niche as well. Thanks Coach. Love the videos.

@rogerclaiborne6815 4 месяца назад

I like the changes. Might have to switch to this over Durock if it becomes available in my area. Pre sized drain pan might be a problem though because framers in my area are horrible these days. Seems like they don't know what square is or how to use a measuring tape for exact measurements. Their close enough is pretty bad and many showers are non-standardized in dimensions.

@johnwhite2576 4 месяца назад

word

@troyherndon 4 месяца назад

Fyi, you can also cut un a table saw

@holyspork 4 месяца назад

Wish they had a lap connection between the pan and the walls also. Looks pretty bulletproof otherwise.

@TileRedi_US 4 месяца назад

We offer an optional Redi Flash (metal flashing) that provides that extra peace of mind when sitting the wallboard on the pan splash wall.

@holyspork 4 месяца назад

awesome, Thanks! @@TileRedi_US

@tonycopelyn8730 Месяц назад

2-things…well 3…first appreciate and enjoy your videos….2…I have not seen this or maybe I missed it, but if you planning to add glass shower doors should there be some planning or effort to install vertical 2x4’s at each end of the curb,and if planning to add shower glass what should the width of the curb be.. and are you able to drill/place screws in the tile redi curb? 3….how do you hide the screw heads that anchor shower pan to the wall…do you bring wall board down to the lip and then bring tile down to 1/8 inch to cover screw heads???? TY

@rixrig6193 3 месяца назад

HELP! I’m a DIYer. We’re am in a mobile home in NC. I tore out our master bath shower system. The DRAIN pipe currently is 1½ in ABS and intend to use a reducer bushing to enlarge to a 2 inch ABS for the FlowFX drain I ordered through your channel. I intend to do a Dry Pack bed. I’ve learned through your videos about using plastic and metal lathe on the plywood floor and your method of screeding the dry pack. I purchased a PVC liner PRIOR to seeing you videos. I have NOT seen one (or missed it) on HOW HIGH the FLOWFX drain should be OFF THE FLOOR. My question is as follows. What is SEQUENCE or ORDER I need to do. Here’s my thoughts… 1. Plastic on the floor 2. Metal Lathe next 3. Determine FlowFX Drain height from floor (1 to 1 ½ inch) 4. Dry Pack put in place 5. DO I NEED this PVC LINER and IF YES, where do I put it? On TOP of the Dry Pack or must I use a liquid waterproofing or some other effective yet less costly waterproofing method. I am AFRAID to NOT get the waterproofing RIGHT. Retired with limited funds BUT, I must get this RIGHT! PLEASE CORRECT ANY OF MY MISUNDERSTANDING! Thanks in Advance if you have the time to answer me.

@eekedout 4 месяца назад

I would like to know how the wall board would integrate to a tub flange for a surround.

@chriscolvin1602 3 месяца назад

Last time i used their pan, they suggested epoxy mortar to set. Surprised no mention Isaac. Has that changed?

@JohnComeOnMan 3 месяца назад

Maybe version 2.0 will have a lap joint where the wall board meets the pan.

@nickf223 4 месяца назад

Just installed a 48x48 inch tile ready pan. I've never done any of this but my wife is away and wanted to surprise her when she comes home with a new bathroom. Any advice on installing durock with the tile redi base?

@jmassaro87 7 дней назад

@tilecoach we are looking to do this Tile Redi pan in our shower. How well do they hold up to mounting frameless glass doors?

@tonycopelyn8730 11 дней назад

Wondering how many tubes of time deck sealant was used and did I miss how you sealed the corners?

@daveferguson2473 3 месяца назад

Any concern about the corners? Seems like potential leak area if house were to move during earthquake.

@tonycopelyn8730 Месяц назад

If you are converting tub/shower on a concrete slab into walk-in shower high far up do you need to go with water proofing/cement boarding ect???

@mikebonom 2 месяца назад

Wondering if it'd hurt to go over everything with Redgard?....Just as a secondary precaution

@independentinstallations8419 4 месяца назад

Do they only come with linear drains or do they offer a variety? Also how's cost compare to a Schluter or Wedi?

@florenciomorenojr2616 Месяц назад

Hi isaac, can I used the hardibacker over the tileredi pan?

@tonycopelyn8730 9 дней назад

In terms of water proofing and longevity; no concerns about installation times…does tile ready have a clear advantage over cement backer board products like USG or Perma and roll on water proofing?

@stevenaylor5163 3 месяца назад

Can use use Redi walls with a Kohler shower base or do you have to use the Redi base?

@johnpadilla109 3 месяца назад

Hey quick question what shower system you recommend I was going to go with schulter but I keep hearing mixed reviews

@stevenall7317 3 месяца назад

How do you do a wall for a 72-inch pan when the boards are only 60in? Do you just butt them together or do you cut a lap joint?

@billsnyder6945 4 месяца назад

You the man Issac, love you too, but your screws on that first lap joint should not have been inside it. It didn’t look right to me and this was confirmed in their video. It seems like the flashing at the pan is an extra measure worth doing, but time will tell on all these systems. Looks like the overall cost is comparable to a Wedi kit, but the pan is bulletproof and wins over other systems hands down. I like the lap idea, but showers have little water issues that high, and Go Board is probably an easier and available wall solution, and again it is the bottom pan that is most important. We had considered using a Kohler Salient cast iron enameled shower pan to get this same bulletproof bottom, but after seeing some photos with the non slip strips looking as bad as the tub we want to get rid of, it will be the redi pan system. We hope the grout on the bottom does not look as bad as some we have seen.

@TileCoach 4 месяца назад

You are correct, I shouldn't have put the screws there. But the screws in the panel right above it, along with the sealant that is joining the two boards together will keep it solid. Thanks for noticing the small things!

@Jerrywekar7621 4 месяца назад

How did you do the window

@kenlovesMurica 3 месяца назад

Theres companies with foam car ramps and lift blocks so its no surprise the foam boards dont compress

@travisk5589 4 месяца назад

It looks like I need to drop a decent caulking gun off at o tile ;)

@kimstrong4482 3 месяца назад

Thank you. My tile guy wants to use schluter which he has used on his home. Do you think if he uses ardex 8+9 with it, that would get rid of any possible problems?

@impalaon22inchrome 3 месяца назад

Make sure they use all the schluter banding where required and 3 good coats for hydroban (by laticrete) on all joints and generations and u will be golden. Don't let them use regard. Hope this helps

@entasis.fifty-four 4 месяца назад

May I ask why you didn’t use their Redi Flash® Waterproofing System flashing between the shower pan and the wall panels? Thanks

@steveorosz3997 3 месяца назад

Yes I would also like to know this!

@karenmitchell6814 11 дней назад

Is there a back and front to the tile redi wall boards or are they reversible? I’m wanting to know if I cut a board in half for the row close to the ceiling, can I flip the scrap piece over and used the flanged edge on another wall?

@davidking1462 11 дней назад

Since most showers aren’t the same size, are the pans custom made for your job? Or are they pre made, and you just find one that fits the best?

@tonycopelyn8730 11 дней назад

File Redi walls seem to eliminate the need for roll on water provoking at a premium price is there any clear advantage to justify 3xs expense of cement board?

@Gymjb5 2 месяца назад

Can you use cement board instead of that ?

@TR4Ajim 12 дней назад

Watch his videos on Schluter shower failures and then decide if Tile Redi is worth the extra cost.

@tomdayton3399 2 месяца назад

How can I integrate a shower ledge into this wall system? Can it be cut and customized while maintaining the waterproofing integrity? I also will have a window to work around, and want to do a 2’x2’ niche. Can this all be done with Tile Redi?

@mikespencer237 4 месяца назад

The fork lift needs a new battery, just saying. Always a nice job!

@TileCoach 4 месяца назад

Yes it does. Thank you for noticing. It’s a 2015 battery barely hanging on 😆.

@tonycopelyn8730 11 дней назад

Looks like Tile Redi eliminates need for roll on water proofing . Set of 8 walls is like $560 and cement boards at home depo like $12/each,,,Redguard $150 for 5-gals (Hydroban $35)/5gals...Are Ti!e Redi worth their price and/or the water proofing protection worthy of expense or just paying for less work and no gain?

@StarrTile 4 месяца назад

I like this system, however I anticipate it will be quite pricey. For this small shower what was the cost for the three walls and the pan ? Proprietary drain ?

@buzzkill8214 4 месяца назад

Pricey should be the least of your worries. Labor is usually more expensive than a product. In this case, someone with a few brain cells can put this together in a couple hours so labor should be minimal.

@jeffsingleton88 4 месяца назад

You suck doyle

@willinthearea6318 4 месяца назад

@@buzzkill8214 2 hours? 😂😂 That’s a whole day of work. Fixing framing imperfections, leveling subfloor, installing the pan, cutting a hole for the niche, installing a niche, hanging the wallboard and applying sealant…. Nobody is going to do all that work in 2 hours. You won’t really save that much time using this system, maybe half a day at most. The labor cost will be the same…Tile contractors aren’t going to lower their prices to accommodate expensive materials. That’s like giving money away.

@RawTakes 4 месяца назад

Every contractor in the country is buying material that is way too expensive, buy large containers in bulk. Put up $30k in all your mainstream units, stock them, become competitive, work with people that can invest with you, stop doing stuff solo lol. I have 300, 100% waterpoof shower kits in my storage that I spent $80 per kit for roughly. Think big, quit using local distribution and make your own distribution company so you keep the money in your circle, buy from your own distribution company through a separate LLC you own, tell your tile buddies to buy through your distribution LLC. Quit over paying! Lol😂

@j.johnson8360 4 месяца назад

I know what you mean, I’m sure you’ll continue to hack it in like you always do regardless of the price of the product.

@troyherndon 4 месяца назад

And the lap is the only one one side still at six feet you will have a but joint

@ohmsweethohm7259 4 месяца назад

That price tag though!

@travlangley1 4 месяца назад

So minor tho, when you consider what a quality custom tile shower cost tho….also there is an offset to labor cost without having to kerdi band every seam/hole…plus you’re not dealing with the build up of corner pieces and what not. Im definitely a big fan of this board system, think it’s well worth the cost increase for what you get

@TileRedi_US 4 месяца назад

We do offer additional discounts when purchased by the pallet.

@ohmsweethohm7259 4 месяца назад

I don’t use Kerdi board or band it’s trash IMO I use goboard it’s installed exactly the same as this board for 1/3 the cost. I always here guys saying the cost doesn’t matter but it does that cost either comes out of your pocket or you risk loosing jobs because the cost given to customer is to high. I will look into a pallet of REDIBOARD when I finish the pallet of go board I’m currently working on though. Maybe it’s more reasonable by the pallet.

@stevemcginley77 4 месяца назад

Issac, I just bought the pan and I am going to buy the wallboard but doesn't Redi Tile make a metal flashing that goes between the pan and the wallboard?

@TileCoach 4 месяца назад

Yes they do, it is optional.

@tryan7 4 месяца назад

Tile coach. It seems much easier to work with. Cost about the same as other products?

@johnwhite2576 4 месяца назад

no its $$$

@davidthorne4491 4 месяца назад

What do you do for custom shower floor sizes ?

@billsnyder6945 4 месяца назад

They make custom sizes.

@maxadrian 3 месяца назад

Well, the washers create an indentation for sealant to completely seal the fastener. But, that said I'd happily give up the washers cause they are not required with the product you are demo-ing. Save time good!

@Cam-wi3tp 3 месяца назад

looked great til i checked price,$900 for a 32''x42'' pan? Uh no but still love your videos!

@kramersiemens8712 4 месяца назад

Looks easy enough. Do you have a discount code?

@TileCoach 4 месяца назад

yes, tilecoach

@kimstrong4482 3 месяца назад

I am not a contractor, but this is still counting on caulk to waterproof at the base. How does that make it superior to others such as wedi that have failure at the caulk?

@TileCoach 3 месяца назад

Because the potential leak point is 6” up off of the shower floor. It makes a big difference. Good question though!

@lorainejenson1724 4 месяца назад

is there a tile redi pan with a center drain ?

@LS-bb9qh 27 дней назад

Yes I got one

@troyherndon 4 месяца назад

Just finished a redi shower, walls are very expensive!! I don😢think time saved is worth the cost.

@johnwhite2576 4 месяца назад

thank you for offering necessary balance cost benefgit-NB and labor savings are rarely passed along to the client.

@shoegum7362 2 месяца назад

Interesting you didn't see a need to use their "redi flash" and just used their "redi seal" to put up "redi wall" . Do you think its just overkill then?

@fatcat-hc4pj 4 месяца назад

I just demoed a shower last week it was the biggest hacked together p.o.s. I've ever seen how can i send you some pictures so you can see the incompetence and stupidity of the original contractor

@RawTakes 4 месяца назад

Need to buy 20oz sausage in bulk lol