Refill DEAD Aerosol Cans with Propane

Подписаться 350 тыс.

Просмотров 15 тыс.

50% 1

Stuff I used in the video:
Digital Tire Inflator: amzn.to/3VRsluf
Valve Stems: amzn.to/3LeRs5s
After Thoughts about the Video: This is not a how too, but instead a "what I do" video. I don't advocate morons play with anything sharp, pointy, requires thought and especially anything you see me do. The can will have a rating on the back or base(usually by the bar code). Most are "DOT 2Q" which means they are rated to at least 270psi before it will burst and designed for an operating pressure up to around 180psi @130F degrees.
USA Aerosol Can Ratings At 130F degrees
No Code Minimum burst 210psi/ 140psi normal operating at 130F
DOT 2P Minimum burst 240psi/ 160psi normal operating at 130F
DOT 2Q Minimum burst 270psi/ 180psi normal operating at 130F
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted...
sixtyfiveford
sixtyfiveford/
Ginger Birthday wish list www.amazon.com/registries/bir...
Any information found on the site is offered for informational purposes only. Sixtyfiveford/channel owner is not liable or responsible for the availability, usefulness, or accuracy of the content made available or transmitted to this site. The information has not been verified by an outside source or authenticated either wholly or partially by Sixtyfiveford/channel owner. Sixtyfiveford/channel owner is not responsible or liable for any misfortune, hardships, or injury resulting from the use of this site. The video is for entertainment purposes only. Do not try this or anything else you see/view on this site.
65 Ford 65Ford SFF

Хобби

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 120

@jbj27406 5 дней назад

The Wizard of Fix-It. You deserve an honorary degree in Economics and Engineering. And don't forget Education. You break everything down so perfectly for understanding. Thanks again.

@sixtyfiveford 3 дня назад

Hey Thanks

@Vikingwerk 5 дней назад

Straight to the point; I clicked because I wondered what the advantage to using propane would be, and you explained it right away!

@onlythetruth883 5 дней назад

Isn't propane flammable?

@Frank-Thoresen 5 дней назад

@@onlythetruth883That's what the producer puts in the aerosol cans. He explained it in the video

@onlythetruth883 5 дней назад

@@Frank-Thoresen Yeah. But it must have other even more important use why he even has it in the first place.

@sixtyfiveford 4 дня назад

Cans used to be filled with "freon" as the propellant for decades. Then it was deemed a greenhouse gas right when the patent ran out. Now propane(fyi an excellent refrigerant r290) though flammable is dirt cheap and readily available.

@MrTheHillfolk 4 дня назад

Done this with some canned paint , because i didnt have any argon to try and figured almost anything else besides air in the can would help.

@gadsdenconsulting7126 5 дней назад

Did you have a dad that passed on all this knowledge to you? A video about how you came to know all these different bits would be great. Many thanks again for taking time to share!

@MoPoppins 5 дней назад

Yes!! 💯

@sixtyfiveford 3 дня назад

My father was far from a teacher of these things. I think it's just growing up dirt poor made me frugal and resourceful.

@gadsdenconsulting7126 3 дня назад

@@sixtyfiveford Thanks very much for the reply!

@MoPoppins 3 дня назад

@@sixtyfiveford A collective thanks from ALL of us, Moe! 🙏 You teach us things they SHOULD school us on in the institutions of “learning,” but instead we sit in classrooms bored & graduate unprepared for life. 🫤 For us lifelong learners, you are a GEM-even more, as no value can be placed on all of this practical knowledge. 💎 💕 I also love that your videos get STRAIGHT to the point-you prove that they needn’t be long to pack in tons of info. 👏 👌

@StewsChannel 5 дней назад

Cool explanation on the propane! My son noticed that my Gillette shaving cream on the bathroom shelf had propane listed on the ingredients list and he asked me why. Lol, I told him I had no clue, but now I will be able to tell him it's the propellent! Learn something new every day! 👍

@rcook2338 5 дней назад

Man I really appreciate your ingenuity and your methods for solving these kinds of problems in low cost ways.

@danieltaylor945 5 дней назад

The little check ball in the can pickup tube is the spray upside down feature. Always love when you post. Thanks

@juststreaming012 5 дней назад

Love the King of the Hill reference!

@3rdpig 5 дней назад

While I'm a cheapskate of the first order, after spraying chemicals and paint all over myself, my tool boxes and the walls multiple times trying to refill them (yea, I'm a slob) I picked up a few of the steel refillable spray bottles. Harbor Freight has them and they can often be found on facebook marketplace for stupid cheap. They've got a fill plug, a threaded nozzle and a schrader valve. One of them will hold something like 4 normal cans of primer or WD-40.

@MrTheHillfolk 4 дня назад

Wouldnt ya know ,i knocked the brand new can of carb cleaner offbthe wirk bench and broke the tip off that sticks out of the can. So i just emptied the pressure , knocked a hole in it and threw it in one of those reusable jobs. Worked fine ,im kinda surprised it still lives , sometimes those things dont like harsh chemicals.

@sixtyfiveford 3 дня назад

That's exactly why I made refillable aerosol cans.

@R3WeldingService День назад

Yup poke a hole and drain it in my sure-shot.

@robertlong9029 5 дней назад

Well made video you helped me to understand the why so that I can troubleshoot

@dagorithe 4 дня назад

Thanks. Great video describing the problem and multiple solutions.

@cosmopezzolla996 4 дня назад

Thanks for three video! Never knew about the Propane thing, very cool how that works. How you know all this, truly amazes me. And of course Ginger did great too!

@09FLTRMM77 5 дней назад

MM77 Approved 👍🏼👍🏼…………………………………………………………………………..You are a fountain of handy man knowledge! You add just the right amount of filler before “ The Ginger Show “, although we didn’t get much of “ The Ginger Show “ today, but it’s ok, I learned that I don’t have to poke a hole in old aerosol cans and dump the contents in a spray bottle! LOL

@cliffordvasy2090 5 дней назад

Thanks for sharing !

@pjkentucky 5 дней назад

Thanks for another informative video!

@JOEZEP54 5 дней назад

I never thought of using propane. Good demonstrating and explanation 👍201 Stay well, Joe Z

@onlythetruth883 5 дней назад

JOE What is propane normally used for? Isn't it flammable?

@JOEZEP54 5 дней назад

@@onlythetruth883 Yes it is flammable. I use it for my grill. But from watching this video it looks like it is used as a propellent. Before trying anything you see on line research it thoroughly. Stay safe, Joe Z

@dbayboyds409 5 дней назад

Awesome explanation thank you!

@1970chevelle396 5 дней назад

I had no idea Propane was in those cans,

@diggerdog9096 5 дней назад

Good stuff You never disappoint.

@shapeshifter7753 2 дня назад

Always enjoy your shares!! You’ve got quite a few to do there!! It occurred to me a modified soda can crusher could work to press the shrader valve onto the can 😁 hope that helps👍

@sixtyfiveford 2 дня назад

Actually only 6 were low on pressure. Kind of surprising.

@yodasbff3395 5 дней назад

Great video, It was good the way you explained the difference between air and propane. Also, the reason why the propane leaks out but not the contents. Plus, we got to see sweet Ginger twice.❤

@konstantinusstoyanov9749 3 дня назад

I didn’t know about using propane, awesome thanks

@roberthutchison315 2 дня назад

great info, yet again

@sixtyfiveford 2 дня назад

Thanks again!

@scottsinfl 5 дней назад

As always an awesome tip brother thanks and take care.

@sixtyfiveford 5 дней назад

Thanks 👍

@corey6393 3 дня назад

Always keep both feet on the wheel. Safety Third! HAHA Great video once again. This will come in handy for sure.

@gregorypierce6703 5 дней назад

Great video! Safety first

@shannonbradley963 3 дня назад

With a rattle can of paint or lube costing ten dollars and up I want every drop out of that can. Never knew about the propane propellant.great tip again Mr Moe .

@sixtyfiveford 3 дня назад

It's insane what a can of paint is costing these days. That's how I ended up with these. I was looking for cans of spray paint and ended up with just shy of 150 cans(25 paint) of random chemicals.

@UQRXD 5 дней назад

I always repressurise my fire extinguishers with it.

@matthewatkinson7558 4 дня назад

Um…

@staind288 3 дня назад

As the propane freezes coming out from the extinguisher, it freezes the fire. Good plan

@UQRXD 3 дня назад

@@staind288 It was a joke.

@staind288 3 дня назад

@@UQRXD mine wasn't. It's science 😁

@flatlinesup 5 дней назад

Freeway fetch ftw! Thanks for sharing!

@sixtyfiveford 4 дня назад

It's always a good time

@JackdeDuCoeur 5 дней назад

Good info. Thanks! Ginger rulz!

@sixtyfiveford 5 дней назад

Thanks for watching!

@jameskim62 5 дней назад

Very Nice Tips !!!!!~~~~~~~

@muchristian 4 дня назад

haha Propane and propane accessories! Very cool

@Rein_Ciarfella 5 дней назад

Next time, Moe, let Ginger drive on the freeway so you can jump out to pick up good stuff. 🐕

@sixtyfiveford 5 дней назад

Great idea!

@Tubeagrutis 4 дня назад

"Both feet on the wheel" 😎 🤣😂🤣

@nitrous07me 5 дней назад

“Hank hill” would be proud 😂

@rjsprojects 5 дней назад

Every WD40 can I’ve ever had goes flat. I always cut the cans open and dump the fluid into a mason jar and use a brush, but then you gotta buy a new can so you have the spray version too.

@The-Armed-Pacifist 5 дней назад

EVERY DAMN CAN! MADDENING! THEY HAVE TO REALIZE THIS.

@MaxGiganteum 5 дней назад

-- That's the universe's way of telling you to not buy WD-40! 😁 - Max Giganteum

@The-Armed-Pacifist 5 дней назад

@@MaxGiganteum That’s probably true. It’s not exactly a bargain brand.

@donho3617 3 дня назад

I bought the WD-40 spray applicator bottle years ago for about $3.00. It has the sprayer and a cap to unscrew to refill and to dip a brush in. My cost by buying the one gallon of WD-40 is a big savings.

@The-Armed-Pacifist 3 дня назад

@@donho3617 Good move!

@khester7397 2 дня назад

So, now i can inhale the nitrous oxide from moms whip cream canisters and charge them up again with propane, and no one will be the wiser!

@DougAskin 4 дня назад

You wont run out of whatever in those cans for awhile, good ways to get the most out of them

@nallen794 5 дней назад

man, I just this week finally got around to making the paint can spinner thingy for my drill, it'll be years before I collect all the pieces to put this together ;). Cool idea Moe.

@sixtyfiveford 4 дня назад

That is awesome!

@Pete.Ty1 5 дней назад

👍👍👍. Thanks

@b-ryanistryin 5 дней назад

Love your videos! When you were showing how the propellant escapes from the common can, you got me wondering: should we be storing our cans upside down so the propellant cannot leak out?

@TheZigZiggy 5 дней назад

Store it right side up and the ball check valve is exposed to the propellant. Store it upside down and the pickup tube is exposed to the propellant. I think it would probably leak out faster that way. But who knows unless it's been tested. Good subject for Project Farm !!

@MaxGiganteum 5 дней назад

-- Here's my take on this... I've always stored paint cans (or any other spray type of can with a material in it which would clog) upside down. You first turn it upside down and depress the nozzle to clear the pickup tube and nozzle of the material inside of the can. Then I pop the cap back on and store it upside down in a can rack I constructed. Yes, you've got to remember to always hold the can upside down and never turn it back over lest some of the material inside the can leak back into the pickup tube and end up at the nozzle. As for pressure loss, I've never had issues with a can going flat nor have I had issues with clogs since I cleared the pickup tube and nozzle before storage which originally was the whole point - I was never actually concerned with leakage. I cannot say whether I've just been blessed or not but flat cans have never been a problem for me. I should note however that I also store my spray cans in more of a climate controlled environment so there's no expansion or contraction as it gets hot or cold outside. That too may have something to do with it. Anyway, my best advice is to try out my method and see if it works for you as you've got nothing to lose. Best wishes! - Max Giganteum

@dbayboyds409 5 дней назад

Good question, I store my in use cans upside down. As I figure I’m less likely to get sediment of clogs in the tube. Seems to work but I have no science to back it up.

@sixtyfiveford 4 дня назад

First, Spray paints don't have this little check ball. They're just a straight tube to the bottom. Seams like everything else though has this check ball. In theory storing those cans upside down would help. The check ball would allow fluid to fill the tube partially. The thicker fluid vs the gas would be less likely to escape.

@b-ryanistryin 4 дня назад

@@sixtyfiveford Thank you for taking the time to reply! I'm nearly finished making my paint can shaker. I've been trying to come up with a clever way to turn the threaded rod into a hex shape(properly chuckable). I found some hex tubing online that's threaded on the inside, could be cool.

@gregorypierce6703 4 дня назад

Time to build a nice fill station just for filling the cans.

@NortheastVintage 4 дня назад

Great video (as always!). Have any ideas how to rescue a can with a broken off male top?

@sixtyfiveford 3 дня назад

I wish I did. I've tried a few things and nothing works. Now I just pour it into my refillable aerosol and go from there.

@R3WeldingService День назад

Rig up the rubber tip air nozzle for propane with your gauge. Seemed to work better than the shrader. I gotta sure-shot, but they not cheap and I’ve lost spray nozzle for it. Comes out like morning piss!

@2LateIWon 5 дней назад

What a great deal you got

@sixtyfiveford 5 дней назад

@@2LateIWon I'm excited. Just shy of 150 cans for $20 and 1.5hrs of driving. That's a win in my book. The only cans that were flat were 6 battery cleaner ones.

@2LateIWon 5 дней назад

@@sixtyfiveford that's awesome

@strongandco 4 дня назад

I remenber when the original schrader valve on the aerosol can video came out. Where did the time go? I've been finding even new WD40 aerosols are running out of gas long before the product runs out. At around the half way point the product starts to dribble out the end of the straw like an old man with a prostate problem.

@michaelrichards4000 3 дня назад

Last time you said compressed air though 😳

@hashimsalim2665 5 дней назад

great

@anthony9thompson 4 дня назад

I once cut open a damaged paint spray can so I could use the paint with a brush. I ripped the paint into a jar and the paint fizzed and bubbled. I suppose this was the propane off gassing

@sixtyfiveford 4 дня назад

Exactly

@Hotdaddy536 5 дней назад

I came here to see Ginger..👍👍👍🇺🇸🇺🇸🇺🇸

@vintage76vipergreenBeetle 5 дней назад

👍

@TgWags69 5 дней назад

I was converting a propane tank to a portable air tank. I couldn't get any air out. So I took out the valve and found that it had a dip tube and ball check in it. Over a certain cfm the ball would float up and seal off the flow. Im surprised you got any propane out of it upside down.

@sixtyfiveford 3 дня назад

I forgot to mention this in a video; The POL internal valve I used bypasses all the safeties on the tank

@robert5 5 дней назад

I am going to take an old c clamp and some wood or scrap metal and make a spray can filler clamp. It will hold everything in alignment and allow me to fill as needed without having to hand hold it all in place.

@macswanton9622 4 дня назад

venturi effect

@davidlester6092 5 дней назад

👍👍👍👍

@MoharaniDas-em7qb 20 часов назад

Hello, are you interested in disassembling lithium batteries?

@thisoldjeepcj5 19 часов назад

:) Keep both feet on the wheel.👍

@patrickmorrissey2271 5 дней назад

They use propane at the aerosol factory most of the time.... Very flammable. Be careful. There are good reasons why the "gassing house" at an aerosol plant is a dangerous place, full of expensive spark detection, fire suppression, and all kinds of other stuff..... Propane is heavier than air, so it's gonna want to fill your shop space from the bottom up, like a pool... Proper ventilation is key.... For the "normal" products you are using, 85 psi ballpark is what you want.... That top part you cut off is called the valve... They are filled through the valve at the factory, with the proper sizes small cylindrical tube.... The o-ring inside the valve will make the seal.... If you have that many to charge, you probably want to try to get the right thing.... It'll make it easier...

@selador11 5 дней назад

Didn't you figure out a way to use an inline container, (Inline with the air line), to refill the contents of a can, while refilling the air? (No need to alter the can itself.)

@yurishnirman3847 5 дней назад

The propane lighter refiller has nicer fittings that will work well on aerosol cans. Maybe can use some of them to make an adapter as well?

@sixtyfiveford 5 дней назад

@@yurishnirman3847 Yes nicer fittings but that's butane. The problem with butane is it's liquid pressure is only around 16psi at 70° F where propane is around 110psi.

@yurishnirman3847 5 дней назад

@@sixtyfiveford True, butane is lower pressure. at 70F charts say its 50psi.

@tvbox6955 5 дней назад

How can we repair the plastic snap latches on toolboxes? The hinge is just plastic so bends to open and broke off.

@sixtyfiveford 3 дня назад

I've broken a few amount of those off as well. I have plastic welded a few ( I have a video on plastic welding). Probably the best. Was using a scrap of thin plastic from an old oil bottle laying that over and spot plastic welding it. So the oil bottle plastic is the hinge itself now.

@skyscraper37 5 дней назад

You’re gonna need a bigger place

@Hato6 5 дней назад

Isn't it better to flip the cans upside down when you fill it? Then the liquid stays in the can.

@sixtyfiveford 5 дней назад

Probably. However, you have to push down so hard to create a seal and to press the lever from the top; it would be impossible with this method to do it upside down.

@Hato6 5 дней назад

@@sixtyfiveford You can build a jig to hold it.. 😅 Can refiller 2000! 👍

@RejectReality97 Час назад

This is so ridiculous 😂😂😂 All you gotta do is take the nozzle off and push some shop air in the can and your'e done lmao Overcomplicated bs right here

@transmitterguy478 5 дней назад

Breaking news: a RU-vid creator was launched into space while filming a YT video and something went wrong. An explosion ensued and launched the RU-vidr, said to be sixtyfiveford into space and is being tracked by NASA, they say he is on course to catch up to Elons Tesla that was launched in 2018. Stay tuned for updates later.🤣🤣🤣 I love your videos dude, I have done a lot of them.

@StrongOneX 5 дней назад

Will that not over pressure the can if it's gaseous and not a liquid? Or am I a dumb dumb

@sportsmobile8328 5 дней назад

MY BROTHER FROM ANOTHER MOTHER.❤ THAT'S WHY MY FAMILY AND FRIENDS CALL ME MARKGYVER.

@SantaClaw 5 дней назад

I tried this, and I refilled my portable Extinguisher, now my hair is gone, and my house burned down. :(

@sixtyfiveford 5 дней назад

Hair grows back and a house is easily replaced with a tent. Sounds like you're good to go.

@SantaClaw 5 дней назад

@@sixtyfiveford That's the correct attitude :P

@robertmcmahon2744 5 дней назад

Fire extinguisher's use nitrogen as a propellant. Non-combustable and no moisture to foul up the propellant inside the canister before use. However, canister should be shaken top to bottom atleast once a month to prevent fire retardent material from settling and forming a hardened dome on the material inside. That may cause failure to dispense when extinguisher is used. It's rare, but can happen.

@SantaClaw 5 дней назад

@@robertmcmahon2744 If you follow farmcraft101 you will also know that dirt daubers or wth you call them, can clog them up. Good practice is to wack the extinguisher against the ground as a precaution before use. That way, you will shake any hardened powder loose. Testing it briefly before approaching the fire is also a good idea.