Remove headlight assembly Nissan Frontier Nissan Pathfinder 

Others tend to yank the grills right away. Always be careful on pulling them away. Great video, Danny!

Thank you for this video! Super helpful and now my Pathfinder looks so pretty!

Thanks for the post, those hidden 10mm. Took me about 90 min's.

Shyt, I’m a lil nervous about attempting this, my headlights need to be replaced badly.. I’m up up for the challenge tho 👍🏼

Great education. I have to evaluate and calculate before I start this project. So I may finish in the allotted time. Thank you so much.

thanks for this. We did ours in 30 mins with your help.

great video. how stupid is the design just to change a headlight

Any idea if it is this much of a PIA for a 1997 Nissan Pathfinder?

Amazing, the grille does NOT have a single screw or bolt holding it on, but the headlight needs 5 bolts to hold it in. 👍 video.

Thanks a lot bro.

Very helpful. I was able to do the entire project in about 3 hours. Thank you for doing this video.

What is the purpose of the square thing kinda floating in the middle of the inside of the headlight assembly, i put some led lights in my pathfinder and the high beam has a big hole in the light pattern where that thing is

Hello, I'm about to get a 2006 Nissan Pathfinder. My intention is to swap the front fascia with that of a 2010+ Frontier. I'm not a fan of the current Pathfinder and would rather give it a modern look. May I ask if you can suggest me what I'll need to make that happen?

Those Terminators 🔥

On my passenger side headlight assembly, the orange turn signal or parking light filter came detached and is loose inside the housing. Is there anyway to access that to reattach?

Thanks for the helpful video. TIP, I found it easier after removing the grill to start at the fender to get the “hidden bolt” out. With the headlight loose I found it difficult to get this bolt out.

Without hesitation I can say that in this instance my time on a Saturday is way more valuable. I'll pay someone.

What a hassle just to get the headlight out. Mine has water in it, any pointers to save me from taking it out?

muito bom, from brazil, i like ..

What would cost just for the labor to get this job done?

Do you have to remove the grill? I just replaced mines with an aftermarket one. I didn't know you were supposed to remove the grill before installing new lights. One of my clips on the inside is cracked and I really don't wanna have to take it off to install the lights

Absolutely a nightmare project on a ‘15

Damn, you got to be kidding me...

Is this the same for 1998 nissan frontier xe ??

god please someone help me you see that white plastic piece holding the bulb into the assembly well mine broke and everyone is telling me I must buy entire headlight assembly for that one piece wth is this a joke??? please someone tell me the name of this part maybe I can find it somewhere

How would you get to that 10mm bolt that's way down in there on the driver's side? I've even taken out the air filter and everything, but I STILL don't have a good angle. But anyway, this one video has been more helpful than every text-only tutorial online combined. Thanks.

The only reason I can see why they designed it like that is so people are more likely to take it to a dealership. I didn't bother putting the hidden bolts back in. 2 on top and the one behind the grill is enough for me lol

They are great trucks and all but this is a ridiculous process to get a damn headlight assembly out.

O why I why did I buy a Nissan dang engineers

What an idiot design just to change a headlight assembly!

My first and last Navara...shit design, crap paintwork, absolute junk...