Тёмный
No video :(

Replace Rear Brake, Rotors , Calipers 2011-2017 Hyundai Elantra 

Jimthecarguy
Подписаться 201 тыс.
Просмотров 67 тыс.
50% 1

Learn how to replace rear brake, rotors , calipers and bleed the brakes on this 2013 Hyundai Elantra.
Here are some of the tools that jimthecarguy uses
OTC 3 LDJ 3 Ton Jack amzn.to/2VXZVnn
OTC S03 3 Ton Jack Stand. amzn.to/3zmYLjJ
www.amazon.com...
Due to factors beyond the control of jimthecarguy, it cannot guarantee against unauthorized modifications of this information,. jimthecarguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. jimthecarguy recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of jimthecarguy, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not jimthecarguy.

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 80   
@evelync177
@evelync177 2 года назад
I love Jimthecarguy--and I'm a girl who knows little to nothing about cars (except how to drive one)! This tutorial video was my 1st DIY brake-replacement and I learned A LOT!! As a teacher, he gives clear, concise and simple instructions that are both easy to understand AND FOLLOW!!! Jimthecarguy is a game-changer in DIY video tutorials on cars and someone I'll be following from now on! Keep up the GREAT work Jimthecarguy!!! :)
@Liam1H
@Liam1H Год назад
The trick in removing the e-brake alone was worth the price of admission! Just excellent and a step I haven't seen in any other video. Thanks for sharing those pro tips! They are hugely appreciated!
@jimmylopez5209
@jimmylopez5209 8 месяцев назад
So true I was looking for the same thing. Thank you Jim
@SimpleLife1971
@SimpleLife1971 2 года назад
Nice work Jim! Later today I'll be doing a 4 wheel brake job on my daughters 2013 Elantra Limited and now consider myself an expert thank to your video!
@jimthecarguy
@jimthecarguy 2 года назад
Good luck i'm sure you can get it done.
@ajadventure8821
@ajadventure8821 Год назад
The best, simpyl the best video for this I've found. Lighting, explanation on the little detail stuff which can be so often where mistakes are made. Thank you for taking the time.
@timb3925
@timb3925 3 года назад
Good info as always. I'm glad you showed the correct way to bleed them. Most videos just say bleed the brakes but they don't explain it as well and they do not show the fluid actually coming out. When you're trying to explain to somebody how to do it it's nice to have the visual showing how to tell if there is still air in the line.
@jimthecarguy
@jimthecarguy 3 года назад
Thanks for stopping by and leaving a comment. Your right seeing how to bleed the system is very important .
@orlandorojas439
@orlandorojas439 11 месяцев назад
Thank you Jim, for teaching this old dog some new tricks. I replaced the rear calipers on my son's Accent and struggled with that darn parking brake cable.
@manuelramos4608
@manuelramos4608 2 года назад
Very good videos for beginners. Im a young rookie mechanic myself & found this very useful
@blaircomer2776
@blaircomer2776 2 года назад
PUTTING ON REAR CALIPERS THIS WEEKEND THANK FOR YOUR VIDEO ,FROM NOVA SCOTIA CANADA
@zivojinbudimirovic1061
@zivojinbudimirovic1061 Год назад
When conecting calipers to brake hose first release bleeding valve and let fluid fill up calipers by gravity then proceed to bleed air from system. Its faster like that.
@ecttreker9816
@ecttreker9816 3 года назад
Great video, easy to tell you are professional and conscientious about your work.
@jimthecarguy
@jimthecarguy 3 года назад
Thank you. I do take pride in my work.
@billyhill986
@billyhill986 2 года назад
What a nightmare job I'm 3 days in atleast 8hrs a day, on both rear brake pads and I finally got the left side done I hope.... But the right side needs a new caliper so this video deffintly helps I'm putting a pause on it untill the weekend when I get paid and can buy all the parts needed but lessons learned for sure.
@colterino
@colterino 9 месяцев назад
Big Help, Jim...did my 2013 tucson..caliper was frozen..all I replaced was that caliper..pins were sliding, cleaned them anyway...rotors and pads were almost new...Nonetheless, the part that helped me most was the fluid bleed...wife helped...went like EASY..
@zed8083
@zed8083 3 года назад
Great job Jim! I've learned a lot from you! Always a professional, never miss a step! Cheers buddy!
@mariacortez6519
@mariacortez6519 Год назад
Excellent video, easy to follow I decided to learn as much about my car to I understand what service is needed and how difficult the process is to repair.
@jimthecarguy
@jimthecarguy 11 месяцев назад
Great to hear!
@philundercoffer8098
@philundercoffer8098 2 года назад
Excellent tutorial on changing all brake components. Very very good. Thank you!!
@jimthecarguy
@jimthecarguy 2 года назад
Glad it helped
@everready19373
@everready19373 2 года назад
I knew I should have watched this first. I fiddled with that damn e-brake cable for 1/2 hour or so. Came in, watched you reattach it and had a Homer Simpson DUH moment.
@marcgiroux470
@marcgiroux470 7 месяцев назад
very good video . add a little piece of clear hose to the bleeding valve nipple, makes the job cleaner and no oil on the disk or pads. there are 4 notches on the piston face and one of them must be position to accommodate the pin on the rear pad!
@laronmckoy8333
@laronmckoy8333 Год назад
Great job Jim. Thanks for always answering my emails when I need help.
@apriljohnson762
@apriljohnson762 2 года назад
you are an excellent mechanic, I give you a 5* rating thank you
@21leash
@21leash 3 месяца назад
very good detailed video!
@apriljohnson762
@apriljohnson762 2 года назад
Well my brake caliper and rotor and brakes were a success thank you and God bless
@Miguel-tb6dv
@Miguel-tb6dv 9 месяцев назад
Great video!
@firewsnake76
@firewsnake76 2 года назад
Awesome video thanks for sharing your knowledge….I manage to change my hyundai elantra break caliper just by watching your video and O save lot money…thnaks again keep it up
@jimthecarguy
@jimthecarguy 2 года назад
Glad it helped
@shadetree6705
@shadetree6705 3 года назад
Great info, thank you. Those impact drivers are simple, inexpensive yet awesome. Whoever invented them deserves to be soaking in the sun on a nude beach somewhere.
@jimthecarguy
@jimthecarguy 3 года назад
Very well put. I started using them back in the day when I had motorcycles. Thanks for watching.
@dad0041
@dad0041 2 года назад
At the 00:30 mark, what did you use as the jack point to lift the car?
@ejinotna
@ejinotna 8 месяцев назад
Is there a video of replacing those dust covers as well?
@bradhodges3335
@bradhodges3335 5 месяцев назад
great video
@thronepotato
@thronepotato Год назад
Great video! Was that car underwater for a few months?!?!? The rust all over that wheel was the most I've seen.
@christophermiller8570
@christophermiller8570 Год назад
Could you mention the torque specs, or the best place for a non professional to find them?
@johnmackinnon8898
@johnmackinnon8898 Год назад
Great job Jimmy! Good video and great instructions. Thank you.
@abdieldejesus5641
@abdieldejesus5641 Год назад
Thanks for your knowledge, good reaching skills
@Smile-uwokeup-2day
@Smile-uwokeup-2day 10 месяцев назад
Is the holes for little screws both r broken off n do not have guts for new screws on the rotors can the rotor still be put on n finish brake job . Will this affect how the rotors n brake works
@waltp3373
@waltp3373 2 года назад
Excellent video. How can you tell if the caliper is bad?
@Ochtane101
@Ochtane101 Год назад
Great video Jim! Learned a lot. I just added Powerstop evolution Z23, brake kit, with drilled and slotted rotors, and carbon ceramic pads. So far so good, for the price? I’m going to tackle the rears tomorrow, if the weather cooperates? Thanks for the knowledge. I’m installing on a 2021 Hyundai Elantra SEL, and so far, about 3 days now, I love this kit! 👍
@rodolfohuerta2303
@rodolfohuerta2303 Год назад
Was there's a lot of help to know the way you teach me thank you I like to work in car but I'm a rookie
@jeffmaloney3843
@jeffmaloney3843 Год назад
Nice video Jim, thanks.
@jimthecarguy
@jimthecarguy Год назад
Glad you enjoyed it
@earfman7527
@earfman7527 3 года назад
Excellent Video Jim!
@jimthecarguy
@jimthecarguy 3 года назад
Thanks for stopping by
@SKEETSENTERPRISES
@SKEETSENTERPRISES Год назад
Great content! Thank you so much!!!
@leothalion3983
@leothalion3983 4 месяца назад
Would this be the same for a 2023
@joller805
@joller805 2 года назад
Very informative and helpful. Thank you very much indeed. Cheers.
@shawnhenderson5124
@shawnhenderson5124 Год назад
Where are the rotors that you mention in your title?????
@mrpureawesomeness123
@mrpureawesomeness123 2 года назад
I replaced my caliper piston and had to bleed the lines bc I didn’t have specialty tool (ended up buying anyways ) now my brakes are unresponsive. Should I keep bleeding the lines and filling as needed ?
@sirjim777777
@sirjim777777 Год назад
Hi Jim, I got a crazy question about bleeding brakes. I had new brakes front and rear pads & rotors put in. Then 2 months later a right driver front caliper went. The shop put in the new caliper. Then I drove away and it felt like I had only front brakes. The passage rear rotors seem to get hot (normal temp) and driver side rear rotor - ICE COLD !!! Since the drivers front new caliper put in and then problem with rear caliper not working - is there air in the rear caliper line ? Thanks
@susu-mi7kx
@susu-mi7kx 3 года назад
BTW great job.. and explaining...that's how you do it!
@jimthecarguy
@jimthecarguy 3 года назад
Glad you liked it!
@sergiocensullo1430
@sergiocensullo1430 6 месяцев назад
My concern is pinching the fluid cable. too delicate and get easily damaged.
@huskylord123
@huskylord123 2 года назад
Thank you, this was awesome
@jimthecarguy
@jimthecarguy 2 года назад
Glad you enjoyed it!
@dantecompany4943
@dantecompany4943 2 года назад
Hey I have a question, I bought the correct rear brake pads for my Hyundai Elantra 2017, however when adding the new brakes, I noticed that it didn’t have the hole where you add the pins compared to the original old brakes. I also noticed a couple other videos where others don’t had the pin. I did a drive test and everything was perfect no issues. Will this have an impact with the new brakes not having the pins?
@PRO4XKEV
@PRO4XKEV 2 года назад
Fantastic job.
@jimthecarguy
@jimthecarguy 2 года назад
Thanks for the visit
@SwayingShark
@SwayingShark 3 года назад
Very detailed good mechanic.👌💯
@jimthecarguy
@jimthecarguy 3 года назад
Glad you liked it!
@sunshineboy03
@sunshineboy03 Год назад
Make one for a Kia Forte
@bradleysmith914
@bradleysmith914 3 года назад
Nice OTC stuff!!!
@jimthecarguy
@jimthecarguy 3 года назад
I do like my OTC stuff for sure
@benjaminburton45042
@benjaminburton45042 Год назад
Great video! I can't get the clip off of mine though 🤬
@scott5768
@scott5768 3 года назад
Hey Jim, Thanks for the detailed video. I have a 2011 Hyundai Elantra with rusted out backing plates in the rear. Any suggestions as to how to remove those 4 hub bolts that are behind the hub wheel on tight?
@jimthecarguy
@jimthecarguy 3 года назад
That is a very common problem. Most of the time it is the rear right side. You will need to remove the rear brakes and hub bearing so you can then access the backing plate. Good luck . Let me know how you do.
@achrafboudemlij9004
@achrafboudemlij9004 2 года назад
Why did you change the calipers ?
@joegonzalez4039
@joegonzalez4039 Год назад
If you're not swapping calipers how do you compress the existing caliper?
@zivojinbudimirovic1061
@zivojinbudimirovic1061 Год назад
On the front just use clamp to press them in on the back you need special toll because piston needs to be turned and pressed at the same time.
@susu-mi7kx
@susu-mi7kx 3 года назад
Hey Jim, I need to change the ABS sensors on a 2001 grand cherokee laredo 4.0 6 cyl. ( i cant let let this car go, has only 128k miles). can you tell me the tools I will need to remove. hope you can help. Done by a girl. Daddy's little girl!
@jimthecarguy
@jimthecarguy 3 года назад
Is it the front or rear abs sensor?
@acrocheezefpv
@acrocheezefpv Год назад
i thought this was the rear brakes....? rear are drums
@josephro6367
@josephro6367 Год назад
my thoughts exactly
@pablomonterosanchez8401
@pablomonterosanchez8401 7 месяцев назад
Domde te ubico
@user-sv4fs5qw9b
@user-sv4fs5qw9b 27 дней назад
no ebrake lmfao
@syrisrodello6590
@syrisrodello6590 2 года назад
This is not what my 2015 elantra caliper looks like.
@colinchandler6516
@colinchandler6516 2 года назад
great video
Далее
Never Troll Shelly🫡 | Brawl Stars
00:10
Просмотров 1,4 млн
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,4 млн
Watch This Before Buying Brakes & Rotors...
15:38
Просмотров 259 тыс.
Brake Caliper Slide Pin Grease
12:38
Просмотров 1,9 млн