Independently replaced bushings in the front subframe of the Audi A6 C6. In total, it took 4 hours to replace the self-service.
To remove the subframe was easier than I planned, you can replace it alone, but it is better to do it together, especially when pressing new silent blocks.
Tools: keys 10, 18, 16, end heads 13, 16, 18, torque wrench
After removing the subframe on the Audi A6 you need to perform a camber-convergence, in my case, after checking the angles of installation of the wheels did not have to adjust. If anything, the collapse is governed only by the permutation of the sub-frame
=====================================
Articles of silent blocks of supports
front VAG 4F0399415C (analogues LEMFORDER 3531501, FEBEST VWAB-029, FEBI 38782, MILES DA13227)
rear VAG 4F0399419E (analogues LEMFORDER 3531601, FEBEST VWAB-030, FEBI 39691, SWAG 30939691, STELLOX 77-00961-SX, MILES DA13233)
=====================================
Instructions and diagrams to replace ELSA SAT on the frame and tightening torque of bolts: yadi.sk/d/4VwxAT40oULhjg
=====================================
Link to playlist Audi A6 repair and maintenance
• Audi A6 C6 ремонт и об...
=====================================
Audi A6C6 4F mileage 171 000 km, 2008, engine 2,4 BDW, front-wheel drive
I'm on DRIVE2 www.drive2.ru/r/audi/a6/47773...
Information on replacement suspension bushes lower arms www.drive2.ru/l/5055862338507...
Self #repair #Audi #A6
21 апр 2019