Тёмный
No video :(

Replace Window Pane on Wooden Door That Has Wood Molding 

Know How Now
Подписаться 86 тыс.
Просмотров 23 тыс.
50% 1

A broken window pane on a wooden door that has wood molding can be repaired without damaging the wood molding (also called glaziers beading). Be careful not to damage the molding because finding a matching replacement could be challenging. In this video you will learn some tips and tricks to remove the molding without breaking it.

Опубликовано:

 

25 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 60   
@user-ew3sm5ld4l
@user-ew3sm5ld4l Год назад
thank you! the magnet trick saved me a lot of frustration
@Know-How-Now
@Know-How-Now Год назад
You are welcome. For sure you wouldn't want to be trying to remove the side with the glue.
@feliziagraye2812
@feliziagraye2812 Год назад
Thank you, very easy to follow and a easy pace. Well done 👍
@Know-How-Now
@Know-How-Now Год назад
You are welcome. It's my pleasure to help.
@duncansmith8992
@duncansmith8992 4 месяца назад
Thank you. Very useful.
@Know-How-Now
@Know-How-Now 4 месяца назад
You are welcome.
@Sloanmatthews
@Sloanmatthews Год назад
Thanks you!! I have looked for a tutorial for glass lights with wood molding for months. All I could find was with glazing. Very helpful.
@Know-How-Now
@Know-How-Now Год назад
You are welcome, Sloan. If you can get the nail heads to pop up and then pull them out, that's the hardest part.
@farqhart9642
@farqhart9642 4 месяца назад
Exactly what I was looking for. Many thanks for taking the time to put this info out there.
@Know-How-Now
@Know-How-Now 4 месяца назад
You are welcome. Best wishes for a smooth and successful repair.
@charleswright4765
@charleswright4765 Год назад
I just had to do a similar job on a door with a stained glass window. The stained glass had a couple of broken panes that needed to be replaced. Removing the trim with the glass in place is difficult. You have good info here and on your channel.
@Know-How-Now
@Know-How-Now Год назад
Thanks for the compliment. I've been around long enough to learn that it's best to do things correctly the first time rather than have a "do over". I hope the videos prevent the "do over". Worse yet, is if I've paid someone to do something and then have to fix their work. Agh. If you can get those nail heads to pop up and pull out the nails you have won the battle.
@14Mechatronics
@14Mechatronics Год назад
Thank you for showing your work!
@Know-How-Now
@Know-How-Now Год назад
You are welcome!
@cawag98
@cawag98 9 месяцев назад
Excellent tutorial. Thanks!
@Know-How-Now
@Know-How-Now 9 месяцев назад
Thanks for the compliment. For sure, if you've never done this patience is your friend. Best wishes for your repair.
@ssconeson1189
@ssconeson1189 Год назад
very helpful!!!
@kevshelley
@kevshelley Год назад
Very helpful, thank you so much. ✌🏼
@Know-How-Now
@Know-How-Now Год назад
You're welcome.
@tice7542
@tice7542 4 месяца назад
I appreciate this very clear video. I have exactly the same door, and while none of the panes are broken they are quite old and scratched up, with paint in the corners, etc. What do you think of the idea of completely removing all the muntins / individual little panes, and putting in one large sheet of glass into the opening? Assuming I find suitable moulding (all new of course) I would expect the process is to be quite similar as you describe, no? thanks
@Know-How-Now
@Know-How-Now 4 месяца назад
I haven't tried it. I recall seeing doors with just one large pane of glass. I wonder if you would need to use thicker glass because it is a large pane? Maybe the larger pane if not thick enough will be prone to breaking? As a side note of interest, early glass making did not have the technology to make large panes of glass, that's why old homes had windows with a lot of small panes of glass. restorationwindowglass.com/glass-history
@SlickArmor
@SlickArmor 29 дней назад
Most states have outlawed glass window panes in doors. Even the little panes. Out of curiosity, why would you do that to your door? Don't you like the little panes? Anyway, when you go for the glass, do not mention it is for a door. If they ask, say they are for picture frames or just buy the plexiglass.
@abdel-hadikaddour8400
@abdel-hadikaddour8400 Год назад
J'ai beaucoup apprécier votre méthode de travail
@Know-How-Now
@Know-How-Now Год назад
j'essaie de faire du bon travail
@abdel-hadikaddour8400
@abdel-hadikaddour8400 Год назад
@@Know-How-Now bonne continuation madame , j'adore vôtre chaîne RU-vid , continue a nous produire des nouvelles vidéo pertinente très riche des information très utiles, merci
@AnneCustom
@AnneCustom Месяц назад
Wow I needed exactly that. Do you think it is possible to remove the mouldings without taking out the glass? I need to take out some of the original glass pannels.
@Know-How-Now
@Know-How-Now Месяц назад
I'm not clear on your question.... you are asking if you don't have to break the glass?
@SlickArmor
@SlickArmor 29 дней назад
Why would you need to take out a pane?
@SlickArmor
@SlickArmor 29 дней назад
Why didnt you show how you assembled the 4 pieces into a square frame.
@Know-How-Now
@Know-How-Now 29 дней назад
I do show you around the 5 minute mark. I presume you can figure out how to wedge the 4 pieces together. You can see I just tap them into place. Maybe you missed that part?
@BBD1-tp9fy
@BBD1-tp9fy 2 месяца назад
Hi, aren't you supposed to put a bead of glass putty/ silicone around the edge before putting the new glass on? to make it shatterproof? Thanks
@Know-How-Now
@Know-How-Now 2 месяца назад
If you want shatterproof glass you could buy the type of glass used in storm doors.
@BBD1-tp9fy
@BBD1-tp9fy 2 месяца назад
@@Know-How-Now so you can put the glass in without any putty/ silicone around the edge? sorry, I was just asking as I need advice as I'm fitting 4 glasses on my new wooden door next week.
@Know-How-Now
@Know-How-Now 2 месяца назад
If the window you are replacing is glazed then you would want to use glaze. If you use 100 % silicone, you won't be able to paint it. Below is an example of glazing a window in place. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3O6ZsKdw8IE.htmlsi=5-dnuEwUmdcgSASD
@SlickArmor
@SlickArmor 29 дней назад
​@@BBD1-tp9fy im looking around to answer this question too. I already bought the window putty. I thought it was to make the window tighter in the frame and airtight too.
@cloverandluna
@cloverandluna Год назад
Hi! it looked like you took each piece of the frame off separately, but then when you reinstalled it, the frame was put back together in a square. Do you need to do that before putting it back in? Thank you!
@Know-How-Now
@Know-How-Now Год назад
I'm not totally clear on your question. I think you are asking how I re-installed the four pieces of molding. The four pieces were a very tight fit. I had to fit them together as a unit (square) and then tap them into place as shown in the video. You might be able to install 3 pieces and then tap the last one into place. It's a good thing mine were so difficult, anyone else having the same problem will know how to solve get all four pieces into place. If you take your time and are careful you can get the molding out without breaking it. The key is to pop the nails up and pull them out. Make sure you are working on the side of the door with the nails. The glued side will likely be a bear to take apart.
@BigScreenLife
@BigScreenLife Год назад
I have one window in the center of my french door that has broken, what did you use to strip off all the paint in order to get the mouldings off.
@Know-How-Now
@Know-How-Now Год назад
I used an infrared paint remover. I bought it to remove the paint from the beams around my front porch. It was kind of expensive, I think I paid $500 for it. I thought I'd resell it on ebay, but after using it decided to keep it. I have a 1952 home that has a lot of lead paint. After using it on large flat surfaces, I thought I'd give a door a whirl. It was time consuming, but the end result was wonderful. I used a triangular scraper and a Hyde scraper that came with several different blade shapes. The door is like brand new... you can't buy a door like this without paying a lot of money. Here's a link to a video I made about using it on my front porch. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3l9kIKr-Z3o.html
@JonnyCoxon
@JonnyCoxon 11 месяцев назад
Do you have advice for putting the moulding together prior to putting it back into position?
@Know-How-Now
@Know-How-Now 11 месяцев назад
Around the 5 minute mark, I have all four sides of the moulding butted together and fit into the window's frame. I am gently knocking the moulding into the frame.
@JonnyCoxon
@JonnyCoxon 11 месяцев назад
@@Know-How-Nowthank you, I meant how did you put the 4 sides of the moulding back together to the square shape before you knocked it it? Did you use nails? Glue? Clamps?
@Know-How-Now
@Know-How-Now 11 месяцев назад
I just held all four pieces together, those four pieces fit into the hole in the door. Then I used the rubber mallet to tap the four pieces fully into the frame. If you can't get the four pieces to fit, then maybe a slight sanding on the four pieces will get them to fit.
@marsery
@marsery Год назад
Thank you ! I have a different problem : i want to remove a dirty glass panel by a wood one so my door which has 3 panels , 2 in wood and one in glass at the top for the bathroom..it's ugly and peopel coming in the entrance don't have to see th ebathroom door ..and i don't want to change all the doors as they're all similar except for that one and that design could be really pretty except for that glass panel ..i don't know if i shoudl try to glue some wood panel but the glass is not a regular surface so the end result mightbe poor or break it and replace by a thin wood panel but i don't know how to do ..any idea how to do this: it would help tremendously :-)
@Know-How-Now
@Know-How-Now Год назад
I am very visual and am not great at verbal/written descriptions.... I am confused about the door you describe and what you are trying to do.
@marsery
@marsery Год назад
@@Know-How-Now thank you for answering . Is there a way to send you a picture ? it would help me tremendously to get advice and know how to from a pro like yourself :-)
@Know-How-Now
@Know-How-Now Год назад
I could spend hours back and forth with you. I can't even understand your written explanation of what you wish to accomplish. You might try consulting with someone that does cabinetry work or a master carpenter.
@marsery
@marsery Год назад
@@Know-How-Now right, so why answer in the first place , a door with 3 panels, one of which is made of glass ..it's ugly , I want to remove the glass and replace it with a thin wood panel etc... and if I have asked it's because I have already asked to a few professionals ... just to remove one little piece of glass and put a thin" wood" which would be painted 800 euros ... and it's a pain in the ass ( excuse my French ) to even get a professional for "so little" ..they're nt interested so over charge for it
@danielcortes3237
@danielcortes3237 Год назад
I lost the pieces of molding which piece of moulding should I buy an how to cut it since it’s thick
@Know-How-Now
@Know-How-Now Год назад
I couldn't find matching molding in stock at any local lumber co or hardware store. I found replacement molding at a local company that does custom millwork. If you don't have a miter saw, the millwork company might cut the pieces for you.
@danielcortes3237
@danielcortes3237 Год назад
@@Know-How-Now thanks for replying
@realSamAndrew
@realSamAndrew Год назад
How do you know which side is glued and which side is nailed in?
@Know-How-Now
@Know-How-Now Год назад
I show to use a magnet to find the nailed side.... maybe you missed that part of the video?
@realSamAndrew
@realSamAndrew Год назад
@@Know-How-Now yes I saw that. At first I thought that was how you located the exact position of the nails so you would know where to apply the force. I didn't think it was how to identify which side had the nails in the first place. But my door is still painted. Will the magnet still work through paint?
@Know-How-Now
@Know-How-Now Год назад
If it's a decent magnet it should. I doubt if one of those cheesy refrigerator magnets will work.
@aaronzhu9654
@aaronzhu9654 Год назад
Hi there. Can u named the 2 tools u used to remove the modeling. Tks
@Know-How-Now
@Know-How-Now Год назад
I used an Olfa utility knife.... I really like this knife. Link to it below. I used what is often called a painter's tool... there a many varieties - you can get one at any hardware store. The wedge blade on it works like a charm to pry the molding away from the door. The tool I used to remove the nails belonged to my dad (carpenter), it's likely at least 60 years old. Do a search for "nail puller" or maybe "nail pliers". Be patient removing the molding. Hopefully you can get the nail heads to pop up and pull them out. www.lowes.com/pd/OLFA-1-Blade-Utility-Knife/50066111 www.paintsupply.com/product/tools/putty-knives/painters-tool/5-in-1-hyde-02970-black-silver-5-in-1-painter-tool/
@aaronzhu9654
@aaronzhu9654 Год назад
@@Know-How-Now tks for reply
@Know-How-Now
@Know-How-Now Год назад
You are welcome, Aaron.
@abdel-hadikaddour8400
@abdel-hadikaddour8400 Год назад
Hello ,
Далее
How to Replace Window Pane With Wood Molding.mpg
6:31
Просмотров 704 тыс.
Replace a Damaged Wooden Door Panel
9:37
Просмотров 2,8 тыс.
UPSTATE DOOR: Glass Replacement
5:53
Просмотров 6 тыс.
Restoring a 120 Year Old Door
15:58
Просмотров 391 тыс.
Installing a Window in a Flush Slab Door
23:41
Просмотров 12 тыс.
Fitting Glass in Timber Windows - Dry Glazing Method
13:56
How to Build a Door that LASTS and looks Great?
24:26
Просмотров 205 тыс.
How To Install A Window In A Door!
7:34
Просмотров 81 тыс.
Every beginner needs to hear this
11:10
Просмотров 1,6 млн
How to Re-glaze an Historic Window
21:59
Просмотров 120 тыс.