Replacing MIB2 USB port for CarPlay support (5G0 035 222 E / 5Q0 035 726 E)

Подписаться 190 тыс.

Просмотров 194 тыс.

50% 1

After enabling full App-Connect (Skoda Smart Link, Seat Full Link) feature you will have new options of CarPlay, Android Auto and Mirror Link available in your car. Apparently #CarPlay needs a dedicated USB port that supports this feature. There's most likely hardware key in the USB port itself required to be recognized by MIB2 infotainment head unit.
🔍 Here's how to replace the original media ports (5G0 035 222 F) in Volkswagen Golf MK7 (5G) with upgraded one 5G0 035 222 E. Original wiring had to be modified in order to connect with new USB port.
You can buy #5G0035222E media assembly with #5Q0035726E USB port on AliExpress:
🛒 ali4cars.com/product/mib2-carp...
🛒 ali4cars.com/s/?p=mib2-carplay...
Enabling App-Connect, Smart Link, Full Link requires FEC/SWaP Codes.
📺 More about that: • What is MIB2 FEC - SWa...
🛒 You can buy OBDeleven here (ref): mr-fix.info/redirect/obdeleven
0:00 Replacing MIB2 USB port in Golf MK7
0:22 Part 5G0035222E
1:12 Remove front cubby
2:12 Disconnect wiring
2:42 Comparing USB ports
3:17 Modified wiring
4:06 Test with Android Auto
4:34 Test with CarPlay
4:55 OBDeleven coding
✅ mr-fix.info/
✅ Facebook: / mrfixpl
✅ Instagram: / mrfixpl
✅ Pinterest: / mrfixpl

Авто/Мото

Опубликовано:

13 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 291

@mrfixpl 9 месяцев назад

Need OBDeleven? 🎟 Get 10% OFF with code: MRFIX10 🛒 mr-fix.info/redirect/obdeleven

@anexbm990 10 месяцев назад

Thank you very much for this tutorial 😀. I was afraid to follow the steps, thinking I might break something or do something wrong. So, I went to VW, but they said it would cost 350€, which was expensive. Instead, I bought the USB port (55€) and changed it myself, and it works.

@mrfixpl 10 месяцев назад

Happy to help!

@skhalil9182 3 года назад

Please keep posting these amazing videos round of applause from London thank you

@mrfixpl 3 года назад

Happy to help!

@n4ser 2 года назад

Hello from Greece!! Just installed mine!! Thanks for the instructions. I changed my port and changed the usb setting with OBDeleven on my 2015 seat Leon style plus trim!! Thanks again!!

@vitoDnb 2 года назад

I have seat leon 3 2015 how can i connect this device from video

@david-ivanmusa9684 2 года назад

Is it needed to do anything to wiring order in connector or just cut plastic notch?

@davidconnolly292 11 месяцев назад

@Mr-fix, you sir are a life saver! My wife's 2016 Alhambra, MIB2. Enabled developer mode, Installed MIB2 Toobox patch, Changed USB port and still didn't work, Bought OBDEleven, enabled the FEC/Swap codes - still wouldn't see Apple, worked perfectly with Android. Set USB port to "ipod" and it worked perfectly. Your videos helped every step of the way. Suggestion: link those videos in the description in that order with a "you are here!" beside the one your watching so that people see where they are in the process.

@MrErnicito 11 месяцев назад

How did you set to "ipod" via OBDEleven?

@davidconnolly292 11 месяцев назад

@@MrErnicito long coding Control unit 5e multimedia Diagnostic session Byte_19_usb Old value: full. New value : usb ipod

@aljazklanecek6203 7 месяцев назад

Thank you! Changing from full to ipod did the trick for me too.

@MatthewFoxX 6 месяцев назад

@@MrErnicito Would you know if this needs a subscription plan with the OBDeleven, or does it work "out of the box"?

@arberkamberi3210 5 месяцев назад

IF U GOT ANDROID , JUST DOWNLOAD IT AS APK FILE MAN . JUST CHECK THE LAWS THERE SINCE IT CAN BE ILLEGAL .@@MatthewFoxX

@AlexB-kv2vs 3 года назад

Hey like the video! You had a really awesome idea here adding some lighting inside the little cubby. Can you make a video describing how you did it? I also have Volkswagen thinking about having it on mine. Keep up the great work!

@mrfixpl 3 года назад

I think I've already done a video about this and other additional lights. Check it out: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-t-BV_M69O6U.html

@mathieuallard8928 10 месяцев назад

It Works! I just had a hard time to put the plastic back in the right place...

@surajv933 3 года назад

Amazing videos and explanations of everything in detail there! Thanks for posting these videos. Can you tell us how to get Android Auto running on MIB2s which don't have Android Auto out of factory?

@mrfixpl 3 года назад

Buy the activation at dealers ot hack the main unit.

@surajv933 3 года назад

Thanks again :)

@cgarrigosa 3 месяца назад

Hi @Mr-fix, First of all thanks for sharing these contents which are SUPER useful for begginners like me! I purchased the vision coding to update my infotainment device, and also changed the usb port following your tutorial. Now apple-car play still does not work, and I was wondering about the OBDeleven coding step you mention on minute 4:55. Not really sure what this refers to, is there any other video were you speak about this? Many thanks, and congrats on the channel! 💪

@deividaspeciukenas8578 3 года назад

Hey man. Awesome video. Was wondering if my USB hub 5Q0035726C would work? Looks the same, apart from green socket and C instead of an E at the end of the lrt number. Thanks!

@Rindmann 7 месяцев назад

Thank you very much for the guide. Could you link the tool u used to lever out the unit at 01:19? 😊

@matteojanczyk6036 2 года назад

Hello I have a question for you. I bought a used vw golf 7 which has a "media in" port. I just changed the display with a newer one from a golf 7.5. Is there any chance to be able to use the android auto or apple car play functionality once I change the overmentioned media in port with a usb port as you did? I hope you answer my question Cheers mate

@ShoukryMousa 2 года назад

I would like to ask about the tool you used to remove the console compartment, what is the name of it?

11 месяцев назад

Hi! I have a Passat B8. I would like to replace the usb port to the green one but in the box, not that place where you replaced in the video. That place I have cigar-lighter plug, I only have USB in the box. It was told that I need some special tool to take it out. Do you have any info about it?

@TheNotkiller 10 месяцев назад

thx, this was helpfull :) can be also coded with vcds

@antunberka5084 3 года назад

Your usb will work for music too, you have to change in 5F modul, byte 19 to USB_ipod. If its already set to USB_ipod, change it to FULL and it will work.

@mrfixpl 3 года назад

Thanks!

@antunberka5084 3 года назад

@@mrfixpl Let me know how it went.

@mrfixpl 3 года назад

Found the correct coding. Here it is for everyone interested: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JH6wFeh8SmQ.html

@miguel.angel100sc Год назад

Thanks a lot! Do you have videos for Audi a3 facelift? I have charge only port

@nikolaaratikovic8618 Год назад

Hi, can you advise me which usb data port should I buy for the Passat B8 if I want to wirelessly connect to the infotainment with an Android phone? I have Android Auto decoded and connect with a cable without any problem. I bought AAWireless for wireless, but it tells me that USB is not supported. Thanks a lot!

@11119cristian Год назад

Hey, Mr.Fix it is possible to leave the socket as it is (only with android) and to use a Cplay2air for the iPhone ? 🧐

@HGJVerschuur Год назад

If I connect one of these to the MMI of my audi with new cables, would this work also? It would not be pretty to have it laying around since it does not fit the audi one but I could keep it in my console or something.

@MexiqueInc 3 года назад

Hello, Regarding the LED foglights Bulbs installed on your car ; how's been your experience with these bulbs? . I just purchased them but I'm dubious about their peformance. I don't really expect much more light performance, just wanted matching color with the current HIDS installed. ¿Did you not experience noticeable glare or wrong dispersion on road signs due to these Bulbs ?

@mrfixpl 3 года назад

Just replaced mine fog LEDs with different ones. Color is close to HIDs in both old and new ones. Just wanted something with better optics for proper light distribution. I don't use them while driving. Just for the coming/leaving home function.

@daveg8604 3 года назад

Hi I had mib1 in my car and replaced with CP removed mib2. AndroidAuto works fine but I have no AUX function on media, if I change the USB port will this enable the AUX function or do I need coding also?

@imreplaayz8459 3 года назад

Hi dude ty for the tips this is totlaly what i need but this is really necessary to cut the pin or u can plug it?

@mrfixpl 3 года назад

I had to cut it since the shape was not letting me connect it.

@atcsolaris 2 года назад

Thanks for all your perfect videos! Thumbs up! How can i know if my usb port support carplay before changing it? I activated app connect, android auto is working but carplay not tested yet!!

@ghostxghost22 Год назад

yes the same, car play doesn't work but android auto yes. It is problem of the port?

@lorembo92 9 месяцев назад

Hi @mr-fix I wonder if the purple standar one works with all Android phone. So can you confim that changing usb is only for Apple Car Play? Because I follow all your guide, enable android auto wich mib2 tools but still get usb device not supported notification.

@desiresher 8 месяцев назад

i have a question, by chance would this work for any other car besides a VW? I have a 2021 Altima and I wanted to replace my USB port but just wanted to know if this would be compatible for it?

@MrErnicito 11 месяцев назад

Hello I installed MIB2 Toolbox patch, did everything what you told in another video, Android Auto is working but with Apple if I put USB connector it shows "USB: device is not supported" so if I replace the USB port it will fix the problem?

@jsmits8 3 года назад

Great tutorial, i have a mk7 2016 aswell. I want carplay, but i find it ridiculous that I have to pay the dealer €250,- to activate it and then to realise that i have to buy another port.

@mrfixpl 3 года назад

That's right! 250 for the license, then 25-50 for uploading the license to the car, then another 50 for USB port and wiring, then 25-50 for replacing it.

@carlosaxo75 24 дня назад

Thanks for the video. Please canyou give more details about how to update the coding? Thanks

@cradleoffilth85 Год назад

What is the difference between two links for aliexpres besides price? Do you have idea how to remove this socket from Seat Leon?

@jimbeattie3983 5 месяцев назад

Is it possible to change the usb status without obdeleven? Carista app possibly? Or any others? Thanks

@eirejk7707 3 года назад

Hello Sir, I have a 2015 Golf Gte with 7 inch screen/mib 1. Do I need to go to VW to get the full app connect enabled or is there another way? Thanks for the brilliant videos.

@jacobhandsgti266 3 года назад

I know there are a few coders that can do it remotely for £80, join MK7 owners forum on Facebook and ask in there

@billx4266 3 года назад

Dont understand so if you put a apple carplay capable usb connector in it you have to do something in OBD? Bummer i was thinking to replace the usb connector to have carplay but i dont have something to code that system.... So its not just replace plug in and it just work?

@rkuper95 9 месяцев назад

Dziękuję

@alejandrollorente9904 3 года назад

Great tutorial!! Thank you. I have the same problem in a 2015 VW Beetle. I'll try this solution to fix it.

@mrfixpl 3 года назад

Hope it helps! You can also enter hidden menu and check if FEC/SWaP code for CarPlay is active.

@alejandrollorente9904 3 года назад

@@mrfixpl Thank you again!! CarPlay perfectly working on my Beetle MIB2 :-). Applauseeeee

@mrfixpl 3 года назад

@@alejandrollorente9904 ✌️

@guillenfl4383 23 дня назад

what where the changes you had to make to be able to connect the green (new one) withe the purple connector of the car? Cut an edge?

@massiisddi1797 Год назад

Hello, please it's possible to work with the "MSTD" version ?? thank you in advance for your answer.

@danthurston1 Год назад

Fantastic video- thanks so much. I’ve been following your vids - have replaced USB port in my seat Leon FR, put on all the SWAP codes and they say valid. I do now get the full link menu show up but it only has mirror link and no CarPlay or Android auto. Any ideas.

@charliesimms2046 Год назад

I've just had the same issue on my seat leon, did you find out how to get around this and unlock carplay?

@ohnoitstime933 Год назад

Same issue

@benjoe177 Год назад

I have discover pro unit, android auto works fine with both of the usb plugin. In the media source I see the USB inputs, but when i plugin a pendrive, it always say usb error or something like that. I tried with 16Gb and 64Gb pendrive also, formatted to ntfs, fat32 and exfat also. Neither of them works. What can be the problem? So in short i cannot use pendrive as a media source. Thanks a lot.

@LonesomeGhosts 6 месяцев назад

Any idea what fuse number this usb port is? I can’t seem to locate

@georgieporgie7523 3 года назад

What coding did you chance please?

@StanleyTan-kc9lr 3 месяца назад

Hi Mr Fix does this port have faster charging capability over the original

@user-bo7ui7on8j 9 месяцев назад

So add fec/swap codes and install this usb port will enable carplay?

@uthmanlone5584 Год назад

Hi, I Have a seat Alhambra 2017 Can't find any information on how to change the USB port which is underneath the armrest Any help would be appreciated Thanks

@kojowiredu 3 года назад

I need help/advice with my 2013 Skoda Octavia. Can I get smart link to work on the Columbus system with a bit of coding or do I need hardware as well?

@mrfixpl 3 года назад

2013 infotainment unit is too old for Smart Link features. You would have to replace your infotainment unit with newer one (+ remove component protection, license installation, coding, new USB port, possibly also new screen and dashboard trim).

@autotronicamobal9193 Год назад

Which coding bquenle move friend for q you recognize the green connector

@mik0szek Год назад

Hi! Today I replaced my USB port as you did in the video. I've done necessary coding and CarPlay works great, although it doesn't seem to recognize Android phone that worked with previous port. The phone just starts charging and there are no notifications both on the phone and car's screen. I think that it's worth mentioning that I used the same USB cable as before, when it worked. Do you have any ideas what to do?

@Yeo123Zg Год назад

Exactly the same thing is happening to me. The old port has android auto working, after replacing with the new port Carplay is working, but android auto is no longer working. I tried multiple phones and cables, and some combinations work for about 5 sec before disconnecting.Very weird issue. Have you managed to find a solution?

@darepec Год назад

@@Yeo123Zg The same here. I also noticed that this particular USB socket doesn't support more than 180 Mbps speed. Did you guys find any workaround?

@LonesomeGhosts 6 месяцев назад

⁠@@darepecif a higher speed cable is used would this damage the part? Mine stopped working after using a 480mbps cable, though successfully for over a month. also does anyone know the fuse number this usb port is to test that?

@tristanjohanneskundrat1113 8 месяцев назад

Hi! I want to use Android Auto in my Skoda Fabia MIB2 (Technisat, SW 0245), and I already installed the Toolbox firmware and SWaP Codes for SmartLink and Android Auto via ObdEleven, and also enabled Google in 5F-Adaptations-Vehicle_configuration. However when connecting my phone I get "MirrorLink is not supported on this device". Do you have an idea? Do I need to buy this new media USB port? Thanks in advance.

@georgieporgie7523 3 года назад

Mr fix did you change the wiring or did you use previous wire and did aux work?

@mrfixpl 3 года назад

AUX worked. Used previous wiring but had to modify the connector with a knife to fit into new USB port.

@m3rri3n36 3 года назад

@@mrfixpl will this plug and play with mine, as I have the older style MDI port? I just want to be able to charge off the USB. I know android play won't work as the unit is too old (2014)

@tomislavivanetic9208 10 месяцев назад

Hi, I have android, and after installing the toolbox from your video and unlocking MIB now still not see android phone but in app connect on MIB I have all 3 options for connect.

@Mateusz0978 9 месяцев назад

Hi Mr Fix, I plugged a USB stick in my Passat B8 for update but the Navigation Pro doesn't let me select it as an option, do you know what the problem could be?

@conorsvideos 3 года назад

Hi.. I hope you can advise.. do you know - the two pins to the side of the port, are they just to provide the power in the USB connection?

@mrfixpl 3 года назад

That's extra 5V for the USB port.

@krzysiekkowaluk Год назад

@@mrfixplmam wtyczkę bez tych dwóch pinów, czy nowe gniazdo będzie normalnie działało na wtyczce z czterema pinami

@carminefornito178 3 года назад

hello I would like to ask you a question. should the wiring be connected to the unit located in the glovebox on the passenger side or to the back of the monitor?

@mrfixpl 3 года назад

To the one in the glovebox.

@carminefornito178 3 года назад

@@mrfixpl ok so you can confirm that the relative wiring must also be replaced

@mrfixpl 3 года назад

@@carminefornito178 replaced if you have MEDIA-IN currently. Added of you dont' have MEDIA-IN/USB/AUX.

@TheThomas7878 2 года назад

mr-fix I have a mk 7 r that I’ve upgraded to mib 2.5 and larger screen however I need so to install a usb must I replace this ? Also do you know where to get it from

@_akand_ 2 года назад

Hi, I changed the USB socket, I checked that the Apple_DIO in the 5F module is active, but Car Play doesn't work the same, are there any other codings to do? Many thanks in advance

@Evgeny_Trubitsin Год назад

Hey there. Too litle information. What exactly do you see on the media screen when you got to AppConnect mode? Is it something like "wasiting for device connection"? If not, then you have to activate the FEC for CarPlay.

@erikkupculik7268 3 года назад

Hi are you planning to retrofit electric tailgate to the golf mk7 as you said in the previous video ? BTW great content and great work !!

@mrfixpl 3 года назад

Hi! I would love to but currently I don't have time for it + the risk of investing in parts that will not work with MK7.

@erikkupculik7268 3 года назад

That is true.. I’ve found some kits specific for the Mk7 on Aliexpress that people installed on their cars. I am tempted to buy it but as you say it is a risk for 300€ .. Thanks for your reply!! Keep the the great work !

@azinhais1972 3 года назад

Is it possible to do something like that to MIB 1, to enable android auto? Also, i wish you happy new year 😉

@mrfixpl 3 года назад

MIB1 does not support Android Auto. You need to replace the main unit.

@azinhais1972 3 года назад

@@mrfixpl if i buy i mib 2 head unit is necessary to code it to my car vin number? Also, have you seen already in Aliexpress the box adapters that allow to have android os in MIB units, that cost around 190€? You could do a review on that. 🙂

@OguzBekdemir-wh9mz 2 месяца назад

Is OBD ELEVEB pro PACK required for USB And Phone Functionality settings ?

@rondovkci 3 года назад

Hey mr fix! First grettings for all tutorials and video clips so far! I own a golf MK7 2015 lounge package of equipment, how do I find out which MIB owns my car? I know I don't have a Carplay option, so I'm wondering if you might know about my car if the MIB you left in the video description will match to my car, so I can order it for myself. Regards,Domagoj,Croatia.

@mrfixpl 3 года назад

Hi! Check this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-AmGHhMOGSC4.html It will explain a little bit more about MIB1 and MIB2, how to tell the difference.

@rondovkci 3 года назад

@@mrfixpl hey mr fix,part number and hardware are the same as your,but software is not,mine is 0241,your is 0245,If i order mib3 from descritpion link will that mib3 will it fit anyway?

@daro3907 3 года назад

dobrze się trzyma teraz po dopasowaniu? bo te zatrzaski chyba na górze są tej całej wtyczki, planuje coś takiego zrobić, działa wszystko bez zarzutów? czy coś przerywa?

@mrfixpl 3 года назад

Wszystko działa jak powinno.

@zeljkomikrotik 3 года назад

Hi, thank you for great tutorial. I have Audi A6 with MIB2 system. Do i need to change the USB port as well? Tx

@mrfixpl 3 года назад

Best of you check which port you already have installed in your car.

@zeljkomikrotik 3 года назад

mr-fix ok. Tx. what should i search for?

@gokhanfromearth5735 3 года назад

thanks for video, is 5q0 035 726 m part support car play? should i change it? thx

@BywaNieWasko 2 года назад

works?

@djmarkeetv 2 года назад

Does anyone know how to remove the compartments without a lid? These do not have the slots for the hinges to put the toll in (01:18). I could mess around, but do not want to scratch my interior.

@Leonardofahrer 3 года назад

What year is the car build? Does it charge the phone while connected using high speed?

@mrfixpl 3 года назад

2016. It does charge the phone.

@michael_wellington 5 месяцев назад

Hello, is this still an issue in 2024 if toolbox has been installed? I followed you toolbox installing guide however I cannot connect to CarPlay. Which USB must be changed and where does it work without changing? Any advice?

@gdel60 2 года назад

Hi, is it possible to modify/update the USB media port coding with an android phone but then use an iPhone for CarPlay? Apple ode units are way more expensive then android ones!

@Evgeny_Trubitsin Год назад

If the OBD-adapter and software that you wanna use supports codinf for VAG (those are not that cheap as you may think of those, btw) - then yes, you can do that. But basically better to find someone around to activate it for you with proper tool (OBD11, VCDS or similar) and pay small reward for it.

@TW80 2 года назад

Super filmik jak i inne! Mam skodę superb 3 z 2016r i carplay działa mi w kratkę. Testowałem różne kable i różne iphony i albo się połączy albo nie. Obecnie mam nowy oryginalny 0,5m kabel od appla i nadal jest problem. Czy wymiana samego modułu usb ma sens? Być może ma jakieś zimne luty i jak go najdzie tak działa. Czy jeśli wyciągnął bym moduł i kupił na jego miejsce taki sam to trzeba coś więcej robić jak np. adaptacja?

@mrfixpl 2 года назад

Dmuchnij sprężonym powietrzem w gniazdo USB w aucie. I sprawdź czy kabelek tam sztywno siedzi.

@TW80 2 года назад

@@mrfixpl próbowałem. Kabel siedzi ok. Jak podłączę to wykrywa sprzęt ale się nie łączy. Loteria.

@mellouktewfik634 10 месяцев назад

How can I know if it's necessary to replace usb port (activation car play in futur)

@rapz290 Год назад

Hi i have change my port usb , i have carplay on my screen but nothing happens, do i have to go through obd 11 to activate the fec? 60800 is not currently enable

@anasabugharbieh3194 3 года назад

Hello, I wanna replace the usb input in my passat b8, I was wondering whether I have to change the cables ?

@mrfixpl 3 года назад

You should but you can also modify existing cable with a knife to fit inside the socket. VAG is using different shapes to prevent cable mixup when there's a lot of connectors in the same spot (for example at the back of the main unit) so if you remove the plastic guiding rail you can use old cable with new USB port.

@timbennett-odlum3615 3 года назад

Hi I have a late 2014 Golf Mk 7 - 1.4 TSI and the port in the console is a media in port only, no USB or headphone jack, is it still possible to covert to apple carplay. The car has a Garmin navigation unit behind the dash connected to the main display unit, but that just recently packed up. My unit is MIB1.

@mrfixpl 3 года назад

MIB1 does not support CarPlay.

@tgybrs 9 месяцев назад

Update: I know that oldest usb port works with all android. Do you think that can iphone 15 work with oldest usb port(3G..)? Because new iphone has usb-c like android.

@dawidpiatkowski8274 11 месяцев назад

Orientujesz się czy można podmienić port.na USB c??

@kunjoonjumedayil7012 Год назад

What's the part number of the carplay key?

@dragos077 3 месяца назад

how did you change the USB settings

@janmikoaj3122 3 года назад

Cześć, orientujesz się może czy w seacie leon mk3 z 2014 jest może doprowadzona wiązka pod usb i aux? Mam kieszeń bez tego wyjścia, ale może jest gdzieś prz6gotiwana wiązka pod to, jak myslisz? :)

@mrfixpl 3 года назад

Powiem tak: byłbym zdziwiony, gdyby wiązka tam czekała.

@janmikoaj3122 3 года назад

@@mrfixpl Rozumiem, dziękuję za odpowiedź :)

@miguelferreira6674 Год назад

Let me ask, if android auto is working but Car play doesn't I need to do this change on my car?

@vedranivic4534 Год назад

How can I check if the current USB port supports Apple (iPhone) connection? I have CarPlay, Android Auto and MirrorLink activated, and a working USB port. Android Auto works via USB but for CarPlay iPhones do not get recognised. I was getting the "USB device not supported" error when connecting, then I tried the Byte 19 USB iPod + Adaptation fix - now the error does not appear anymore but the iPhone still doesn't get recognised.

@endritAL1887 Год назад

Hi I got the same problem Did you solve it? If so, could you please tell me how you did it?

@Bennnjio 3 года назад

Thank you very helpful, I changed mine as I couldn’t use apply car play as well! But before I changed the usb my old one stopped working so i thought it was just the usb playing up. I then put the new one in and it still doesn’t work. Any ideas ?? Thanks!!

@ironpumpGYM 2 года назад

The Same happend to me i replaced the usb and it didnt work 2

@ghostxghost22 Год назад

The same i have replace and did’t work. Any solution?

@ahmedakeel9315 3 года назад

Hello, I have a problem with the BMW E39. The problem is that the alert shows engine failsave prog . Can you tell me what is wrong?

@mrfixpl 3 года назад

I think that you should get a diagnostic scanner and read faults from the engine control module.

@angusnz7910 3 года назад

I’ve done the exact same thing in my passat with discover pro...app connect loaded and plug changed...but how do you get the car to recognise the new carplay plug?

@mrfixpl 3 года назад

Module 5F, long coding, byte 19, one of the bits is responsible for the USB port, set it to "usb_ipod"

@angusnz7910 3 года назад

@@mrfixpl just seen your reply and thanks. Do I get to this via green menu ( (it’s already activated)

@martynakoscianek4729 Год назад

Cześć, posiadam vw golf 7 rok 2015, „radio” bardzo podobne jak na filmie lecz nie mam navi i odnośnika appconnect. Czy sposób pokazany na filmie zadziała lub czy jest jakiś sposób aby posiadać Apple car w aucie?

@yechoumohamed9181 3 года назад

Hi i got the same issue a friend of mine Also said i need to get a new usb Port. I got a polo so i need a different usb Port. My polo is from 2015 with mib2 Android auto and mirrorlink it has CarPlay in the menu. Do you got a part number for My Socket?

@mrfixpl 3 года назад

I'm not sure about the whole AUX+USB assembly, but I think that the USB port alone should be the same as here (you can remove it from the plastic frame).

@miloo9142 5 месяцев назад

Czy wymiana samego portu zadziała czy trzeba później ten port jakoś zaprogramować ?

@prianvyra2433 3 года назад

What coding change did you do to make it work?

@mrfixpl 3 года назад

Here it is: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JH6wFeh8SmQ.html

@kaurvali 3 года назад

The USB in media is disabled while carplay is enabled. When usb is connected but Carplay isn't turned on then the usb should be in media. At least that's how it is on 2019 Superb.

@mrfixpl 3 года назад

Thanks! Will check it out some day just for fun. Right now I have my music library on an SD card.

2 года назад

Hi, how much charging power you could get from 5Q0 035 726 E ? vs previous socket ?

@mrfixpl 2 года назад

I believe the same amount of power, since it's not the port that's limiting it.

@minoman6434 8 месяцев назад

Is it working?

@kirill_bomj5444 3 года назад

Hab eine Frage. Passt für Teilnehmer 5G0035486A ?

@GryEryka4412 11 месяцев назад

Do i have to do in my audi a3 8v 2018 ???

@cg3769 2 года назад

Ive not got app Connect do i only need to replace the usb Port like you did in order to get the app Connect on my screen?

@mrfixpl 2 года назад

Replacing the USB port will not activate AppConnect.

@cg3769 2 года назад

@@mrfixpl What else do i need to replace?

@lucasbienmiller Год назад

Hi, thanks for the tutorials but Carplay doesnt'work(Android auto works). I did all the steps. Activated codes, replaced USB socket. I activated Apple DIO but i dont found USB configuration in OBDeleven. Can someone help me?

@Goujova 3 года назад

Does the CarPlay works only with USB on this device or can I paired an iPhone on Bluetooth?

@mrfixpl 3 года назад

You can pair an iPhone over bluetooth, but you will not get CarPlay that way. Wireless CarPlay is using WiFi, was not available in this system, but can be accomplished with this device: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-wzy-lgowVLI.html

@szymonmadziara4270 3 года назад

Hi, I have a problem with seat leon III 2016. I have installed updated USB (green one) and chagne configuration with VCDS for USB supporting. Fullink works for android but not for iOS device. Do you have any idea what might be the problem? Is there anything else that needs to be updated.

@mrfixpl 3 года назад

Enter hidden menu to check if there's a valid license installed for CarPlay. Also check if your phone port is clean and if the lightning cable is not damaged. CarPlay will not work if the cable is low quality as it requires steady connection.

@carminefornito178 3 года назад

maybe the wiring, you have the same problem as me. you solved?

@charliesimms5362 Год назад

@@carminefornito178 I'm having the same issue did you find a solution to this as both my license was valid in the installed codes as well as the Apple-dio adaptation enabled and the usb replaced with the usb_ipod code changed

@charliesimms5362 Год назад

also Siri is enabled on my phone and I bought a carplay verified cable and still no luck?

@nickdegroot2445 3 года назад

Is it also possible to do this in a Seat Leon 5F?

@mrfixpl 3 года назад

Depends on main unit.

@Jan-tj8wu 3 месяца назад

Hi i have in passat b8 old usb and doesnt connect to carplay…the usb is 5Q0 035 726 any help ??

@salbottiglieri7948 Год назад

I’m retrofitting MIB STD PQ on Mk5 2006 Jetta, do you know where I can mount the same OEM CarPlay port on the Mk5 also is it somehow possible to code the older model car image? Please don’t laugh I love my older car want to keep it for another 8 years it’s new old

@pjs2398 2 года назад

do i have to change the port for android to work or can i just get app connect activated and use

@mrfixpl 2 года назад

Android Auto will work on any USB.

@rafka379 24 дня назад

Hi, I done everything like you said and its dont work for me. Is it possible because my media is cracked?

@filmatical7450 2 года назад

Hello Mr.Fix. Please do you know if this upgrade will work for MIB2.5 Discover Pro 9.2”? (5NA035043D)

@mrfixpl 2 года назад

Honestly I'm surprised that MIB2.5 Discover Pro needs an USB upgrade. You sure you don't have it already?

@filmatical7450 2 года назад

I just upgraded from Mib1 to Mib2.5 that’s why. I have an usb port that came with Mib1, just like yours. Do you believe the new port will work with Mib2.5 just like with your Mib2? Thanks!!