No video :(

MIB2 coding for USB media source after CarPlay port retrofit

Подписаться 192 тыс.

Просмотров 42 тыс.

50% 1

Coding and adaptation changes in VW #MIB2 Discover Media system after USB port replacement to have both CarPlay functionality as well as #USB source option in MEDIA player.
ℹ️ The same procedure will work for other MIB2 devices installed in Audi, Seat, Skoda, and Volkswagen cars. Your infotainment system needs to support #CarPlay feature, have proper license key installed, and have correct USB port (connector 5Q0 035 726 E inside assembly 5G0 035 222 E) for the feature to work.
➡️ Coding procedure
Module: 5F → Coding → Long Coding → Byte: 19 → Bit: 6 → enable
Module: 5F → Coding → Long Coding → Byte: 19 → Bit: 7 → enable
Module: 5F → Adaptation → Channel: Interface for external media activation - connection 1 → activated
➡️ Buy OBDeleven here (ref): mr-fix.info/red...
➡️ More tweaks for your car here: ilovecarmods.com/
📺 MIB2 USB port replacement: • Replacing MIB2 USB por...
0:00 MIB2 CarPlay port
1:11 Coding and adaptation procedure
2:52 USB source option
3:14 System reboot
4:01 Thumb drive with MP3 testing
✅ mr-fix.info/
✅ Facebook: /
✅ Instagram: /
✅ Pinterest: /

Опубликовано:

15 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@mrfixpl 10 месяцев назад

Need OBDeleven? 🎟 Get 10% OFF with code: MRFIX10 🛒 mr-fix.info/redirect/obdeleven

@64bittz93 13 дней назад

Hi mr-fix, i wanted to buy and obdeleven for doing exactly this, is the base model sufficient or do i need the ultimate vag plan? Thanks

@hcAsicted Год назад

Thanks for this video! It was the thing I was missing after replacing the port and activating carplay!

@gregorwasik2589 Год назад

Do Long coding wystarczy podstawowa wersia czy musi byc Pro ? Danke.

@neilhibbert5201 3 года назад

Hi I wonder if you can help me.i have just bought mk7 golf r it did not have sat nav in it so .owner got one and had it fitted but no sound comes out of radio or any music from sd card or juke box its mib1 system.can you help.

@mrfixpl 3 года назад

Maybe it's configured for external amplifier which your car does not have? First of all I would scan for faults with VCDS or OBDeleven or any other diagnostic tool to check what codes are there.

@neilhibbert5201 3 года назад

Thanks I have obdeleven. I will try and let you know. Many thanks

@neilhibbert5201 3 года назад

Hi mr fix I have used my obdeleven and its come up with 2 faulty you may be able to help me.1 component protection fault code u110100 fault static. In learning counter 71 ? .is there a way to learn multimedia display unit that's the second fault. Please can you help?

@neilhibbert5201 3 года назад

Hi is it something that can be recode ???

@Bz_Footage Год назад

After open car door the USB port is energized for only for 30S befor turn on the car, how can I put more time? Thanks a lot

@giovannibarraco8947 4 месяца назад

It's possible install into polo 6r ?

@Brad0st 2 года назад

Hi, the head unit Discover Pro on my golf mk7 damaged I ordered a used one on eBay, my question is will this OBD can code or reset the unit in order to work on my car?

@mrfixpl 2 года назад

You can use OBDeleven to copy/paste coding and adaptations from the old unit to the new one. Buy you still need dealer-level tools to remove component protection and to upload valid FEC/SWaP codes to enable all protected features.

@gregorwasik2589 Год назад

Do Long coding wystarczy podstawowa wersia czy musi byc Pro ? Danke.

@vedranivic4534 Год назад

How can I check if the current USB port supports Apple (iPhone) connection? I have CarPlay, Android Auto and MirrorLink activated, and a working USB port. Android Auto works via USB but for CarPlay iPhones do not get recognised. I was getting the "USB device not supported" error when connecting, then I tried the Byte 19 USB iPod + Adaptation fix - now the error does not appear anymore but the iPhone still doesn't get recognised.

@andrewppp 4 месяца назад

Did you find a solution ?

@rafka379 Месяц назад

Same here

@guillenfl4383 Месяц назад

same here

@benjoe177 Год назад

Hy Mr-Fix, I have discover pro unit, android auto works fine with both of the usb plugin. In the media source I see the USB inputs, but when i plugin a pendrive, it always say usb error or something like that. I tried with 16Gb and 64Gb pendrive also, formatted to ntfs, fat32 and exfat also. Neither of them works. What can be the problem? So in short i cannot use pendrive as a media source. Thanks a lot.

@Dogge_r Год назад

I have 14 golf and when I try to safely remove sd card 1 it doesn’t give me the option it skips straight over it how do I fix that

@luka7273 Год назад

Hi, and thank you for this video, I wanted to ask for your help if possible. A few months ago, I retrofitted from a Composition Color to an MIB2 Std ZR. I used the MIBToolbox to unlock it, but CarPlay and Android Auto are not functioning. Even after following all the procedures, it shows a USB error. CarPlay and Android Auto used to work with the old radio. I used VCDS to modify the parameters. Thank you for your assistance.

@thekosabic4750 3 года назад

Hi Mr-Fix, which OBDeleven version I need for this action, the STARTER pack or the PRO pack? thanks in advance, T.Sabic

@mrfixpl 3 года назад

PRO license is required to access coding and adaptations directly.

@carbongecko 2 года назад

Mr. FIX i have a question that hopefully you can help me with. I bought a mmi decoder box for the 2016 mk7 golf s, to get wireless android auto. I installed it using the plug and play cabling and got the Bluetooth to sync with my phone but the wireless portion doesn't work. Would you know 9f I need to code something through either the 5f module or the green setup screen. I have a video showing the error I received on my channel. Any information you can shed a light on would be greatly appreciated.

@michaelanthony134 Год назад

Hi my car the usb option greyed out even when i plug in my cable it’s not detected

@JPOlivePT 2 года назад

Hi mr-Fix, is it possible to replace the usb port with a 2 usb port to have the VW LTE Usb & Carplay working in the same time?

@mrfixpl 2 года назад

Yes. You need VW USB HUB + two standard ports + wiring + coding. The HUB + standard ports are actually cheaper than single CarPlay-enabled port - if we are talking about 2nd hand parts.

@freelockuk Год назад

@@mrfixpl hi Mr-Fix just fitted the hub. i have andriod auto working and carplay but when put usb drive in it (says reading usb2) usb 2 is bold but when i activate it nothing happens..have tried the usb on a pc and the music is there

@Al-un2un 3 года назад

I have a 11 Jetta Sportwagen. Would this radio work with it?

@mrfixpl 3 года назад

I believe there's something called "MIB2 VW Discover Media PQ" that you can install in Jetta VI.

@TheNorville2 2 года назад

Hello, do you know how to enable the maps in the mk 7,5 clocks, all i get are just direction arrows

@manecosify Год назад

Hi. Is there any way to make mib2 show the artwork (album cover photo) when streaming on bluethooth? I see that playing from sd card/usb shows the artwork. Thanks

@mrfixpl Год назад

The limitation is in the phone, as far as I know. Some android phones will stream cover art via BT. iPhones are not doing that.

@manecosify Год назад

@@mrfixpl thanks a lot for the fast response. I also tried with a galaxy s9, it doesn’t work. I will try with other android phones also

@MrCipam123 2 года назад

Hi. I'm wondering if you can help me. My passat b8 ( 2015) has two usb ports, one underneath the display ( usb 1) in similar position as in this video. The second one (usb 2) is in the compartment that is located between two seats. Andorid auto works on both USB ports, but Carplay works only on usb 1. Do you maybe know why this is and is there a way to make carplay work on usb 2. Thanks.

@aronlinecoach 2 года назад

I have the same issue on the passat B8 2015, carplay only works on the one in the center console and not under the arm rest. Would appreciate your advice. Do you think changing the settings in obd11 for that port make any difference? Thank you

@Evgeny_Trubitsin 2 года назад

Hey there. Most likely tou would need to replace factory USB port with the upgraded one in the armrest box. Chech this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7yTYaxzeXfY.html

@Evgeny_Trubitsin 2 года назад

@@aronlinecoach Hey there. Most likely tou would need to replace factory USB port with the upgraded one in the armrest box. Chech this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-7yTYaxzeXfY.html

@Tarhassan 3 года назад

Cześć, czemu trzeba wymienić USB port? Mam MIB2 discover media w golfie vii z 2015 r. i zastanawiałem się czy samym obd11 z Twojego linka dam radę odblokować app connect.

@mrfixpl 3 года назад

CarPlay wymaga innego porty USB. Dokładnie nie wiadomo dlaczego (możliwe, że jest tam dodatkowe zabezpieczenie sprzętowe). Samym OBDeleven nie aktywujesz AppConnect, bo ta funkcja jest chroniona kluczem licencyjnym. Albo kupić w ASO albo znaleźć kogoś kto nielegalnie zmodyfikuje jednostkę.

@gregorwasik2589 Год назад

Witam. Jakim urzadzeniem codujesz ? Dzieki za wiadomosc.

@tewfik966 Год назад

i confirme thanks

@mrfixpl Год назад

👍

@kozakistvan248 Год назад

A nice day. I would like to update the current Infotainment system in a golf 7, the system is a MIB1, 5G0035819 A without navigation. can I upgrade to MIB2 with navigation and android car play?

@sebol02 3 года назад

Hej! Pytanko, te panele na desce to oklejałeś może? Wygląda jak MATRIX BLACK|3M S2080, mam rację?

@mrfixpl 3 года назад

Dokładnie tak. Jeszcze nie wszystko gotowe, ale wzór mi się szalenie podoba.

@sebol02 3 года назад

@@mrfixpl Dzięki! Tak myślałem bo mam dokładnie tą samą próbkę u siebie bo też chcę okleić :) A teraz jak już zobaczyłem jak wygląda to jestem przekonany na 100% :) Moim zdaniem wygląda super, do tego ta lekka fakturka też robi robotę, a wygląda lepiej niż carbon

@mrfixpl 3 года назад

Carbon jest tak oklepany, że aż szkoda czasu o nim mówić. Szczególnie gdy jest tyle fajnych folii strukturalnych.

@mosiuoamolakeng6220 9 месяцев назад

Hi Mr Fix. My car uses the old MDI cable and I did all of the steps after retrofitting a 2018 MIB2 radio. Please assist

@mosiuoamolakeng6220 9 месяцев назад

USB source appears when I press source but it’s greyed out

@mrfixpl 9 месяцев назад

Have you replaced the MDI with proper USB?

@atcsolaris 2 года назад

Hi i hope some one can read this and help me. I have a Tiguan 5N 2016, android auto is working. But not carplay ! I have done all the software changes via Obdeleven : usb_ipod, and activate first line in interface for external media. But CarPlay still not working. I called my vw dealer and they said all the tiguan delivered in 2016 had the good usb port !!! I dont know how to check my usb port and any other solution... thanks

@Evgeny_Trubitsin 2 года назад

Use any available on-line VIN parts catalogue (or get familiar with ELSA): enter your VIN there, check the part number of factory installed USB port and compare it with the one that support CarPlay (5G0 035 222 E).

@Goujova 2 года назад

I’ve a VW Beetle from 2015. VW started put MIB2 on Beetle from 2015. I’ve bought MIB2 with CarPlay licence and needed USB but I can’t use CarPlay. VW tech said that it’s car is not capable for CarPlay. Is OBDeleven can solve this? If it’s how to do?

@mrfixpl 2 года назад

CarPlay and few other features are protected with FEC/SWaP codes which are generated for VIN and VCRN. If you install the unit in different car, those codes will not be valid anymore as the VIN is different.

@Goujova 2 года назад

@@mrfixpl Is there any possibility to solve this? VW technician that he can’t generate any activation code if car not App Connect capable.

@mrfixpl 2 года назад

@@Goujova If you car in not ready for CarPlay (you don't have the AppConnect icon in the menu) there's not much that you can do other than replacing the main unit.