Resetting MyKey with 1 key, must be remote start and push button ignition 

Dude your honesty a legend just saved me 200 bucks on another key

On a 2016 mustang it needs one little modification whenever it asked to restart the engine my engine was running but I had to tap my button super fast because if I let the engine die completely without hitting it before it died it would not trip the my key settings but I did it super fast the engine didn't get a chance to fully die before I tapped it and turned it right back on that trip to my key settings and I reset it works perfectly thank you a billion times so much

Absolute life saver!! My admin key chip died, which everyone knows it limits your xm radio stations and volume, max speed etc. thank you for this trick

Just worked for me!!!!thank you so much brooo 2015 mustang. I just started car normally with brake, gave key to someone to walk away with, waited till they got decent distance, then cleared codes like twice, turned off car(it says restart now or get key) restart the car, boom menu was there. Cleared mykey. Been trying to find solution for like 8 months

Hello, i have remote start on my 2013 f150 but not a push start button. How do i clear this. Ya lease help.

I didnt believe it was going to work at first....and then i tried again and hy ...i got them erased👍🏼 thanks

Thanks so much man it works 💯

You sir, are a hero

do I need a sct scanner or any obd2 will do the job? thank you so much

Dude you are awesome it worked perfectly. I just so happen to of already had the sct tuner. Thanks so much!!

Can I do this on ford explorer 2014?

I got a konnwei support all obd2 protocols bt3.0 for android. I trying to clear mykey also and I just want to get the right app to clear the codes.

This worked on a 2018 Ecoboost, had to reset codes 2 times for the message “Restart Now or Key Needed” to pop up. Thank you has been bothering me for months.

I tried it over and over on my 2011 Edge and couldn't bring up the menu to turn MyKey off. I have bought extra remotes from Ebay and Amazon thinking I will have to use Forscan to clean all keys them program new. But you need two remotes and if there not right your screwed. A idea how I can tell if the ones I purchased are the right ones or not??

Mykey is definitely a hassle. A set mines up by mistake. How can you set it up with 1 key but you need 2 keys to reset it 🤦🏾‍♂️

I’m having this same issue! I’m just not sure where to get the scanner to clear the codes? What is this and where do you get it?

Hi, would this disable all the restrictions (80mph, radio volume, seatbelt, etc.) or just the pop-up notifications?

helped on my 2016 gt

Would it be the same method for a 2016 mustang gt? I accidentally enabled mykey but only have 1 key

Imma try this, I hope this works

the my key setting do not show up after I take the key out of the can and restart it, do you know what I might be doing wrong?

Tried dozens of times and gave up. Nothing worked. Tried 2 different code readers to clear the codes but they never would reset my cluster like yours did. Even tried clearing the codes multiples times on some attempts. Nothing would reset the dash. I drive a 2013 Lincoln mkz (basically a ford fusion) if anyone has any more advice

I have a 2013 ford max hybrid… if anyone knows a way to fix the mykey issue i would really appreciate the help

Interested i have for fusión 2016

I cant do it without the scanner? I have only one key and no scanner that can erase the check engine light and i have the limited volume

I’m have some issues with my 2015 escape titanium. Am following the steps but am not having any luck!

Do you know if this works on the 2012?

it won't give me nothing after I cleared the codes....

Thanks so much finally something that worked! Thank you so much!

Autel MS309 will this one work for it?

do you know any other cheaper recommendations instead of that code reader you have since its 400. 😬 \

Does it work without a srt scanner because I tried this with a regular scanner and it didn’t work can you please help ?

Can you help me I am trying to clear the my key on a 2017 lincon and the want about 500 dollars for a second key to clear it

will this work with lincoln as well?

I have a obd 2 that can send clear command. And my dash never clicks or resets. The temperature goes to -39 but it doesn’t work. I have 2014 fusion titanium

Hi, I have watched your video several times and tried with my own OBD code scanner. It's not working for me. I have lincoln MKX push button starter. Please, help me. Thanks.

Hi, I have one key and there isn't start button in my car. How i must do😑

I have a 2016 Mustang That has my key active and I went through the steps to try to get it off eyeball a blue drive off of Amazon erase the codes but it still pops up

İ cant understand which program you used

Not that this will get a response, on a 3 year old video, but does anyone know if autozone would have that kind of tool?

Don’t know if I’m doing something wrong or what I cleared my check engine dtc codes and it beeps and everything still not working

So when I go to clear the code, my scanner tells me there are no codes to clear. And I proceed with the step but it doesn’t reset the MyKey

can you do this without a tool to clear the codes?

someone stole my spare key, I need to reset it and get new codes, how I do that?

I have a 2016 Ford Fusion Titanium. Didn’t work for me. 😥

Can this be done with a FIXD

Does this work with a mustang GT

Subtitulado por favor !!!

Hello it didn’t work for my first fusion 2016 help please!😢

Does it. work for ford mustang 2016. I have only 1 key with remote start.

Can confirm this works on 15-17 Mustang GT (manual) as well, however the metal key isn’t needed.

Tanx. They made it way more complicated than it needed to be.

Wait so could I get my codes reset at an auto shop store?

I have a 2017 Ford explore and it’s not working for me

I have 1 key and set up and cleared with 1 key but now I’m struggling to do it again

Hello, I have that problem but mine is a Ford Explorer 2011

Hello I’m hoping you’re able to help, but every time I click clear codes on my scanner it’s giving me an error that there’s no codes to clear. Am I just out of luck at this point?

What is the name of that machine

Bro i don’t have any codes , & instead of sct i have an Nguage

I didn't find erase All key And create key, how I erase this massage [ my key active drive safely] now,

Mine don’t have push start button, but it does have remote start

Do yiu need this other tool ?

Where do you put the key?

I need help

2020 fusion??

Can you use any kind of tuner for this?

I tried that but nothing works for my 2017 fusion

It’s not working for my Ford Edge I have a cheap code scanner

Pode ser feito pelo forscan ? Como seria?

I don't have an option for mykey

When I close the door and got to turn it on it keeps saying my key detected? Any one else have this problem...BTW I'm using a modus ultra scanner for this

I have 2014 lincoln mkz followed all steps. My key still active. I've been trying everything. I can't afford to give a dealer 400 bucks...

Like ma y have stated this absolutely doesnt work. You never expkain where the code is when scanning which I did and nothing shows up thus this doesnt work.

Bro I am having hell!! I cannot get past this me you it will not allow me to go to my key settings. I’ve been trying to do this for a month. Now

I need help men

Not working for my 16 mustang, I only have 1 key and accidently set that my key bull crap 😁

Hey

Doesn’t work for f150

I can't get my remote start to even work

Doesn’t work mannn 💔💔💔💔💔💔💔

This doesn't work

Doesn’t work.

what a joke didn’t work for me