Reverse Gear Grinding Noise and Hard to Engage - Solution

Подписаться 813 тыс.

Просмотров 96 тыс.

50% 1

Reverse gear can be hard to engage and when it does go in you may hear a horrible crunching/grinding sound. In this video I explain how to select reverse gear successfully, why the sound happens, how to avoid it and why reverse is more difficult than the rest of them.
Instagram: conquer_dri...
Facebook: / conquer-driving-162518...
Get a competitive quote for your insurance via these links:
Collingwood (up to 35% discount via the link):
www.collingwood.co.uk/learner...
Confused:
www.awin1.com/cread.php?awinm...
The above links are affiliate links and Conquer Driving may receive a small commission if you use them but they will cost you nothing to use. I've done a lot of research and I would recommend these links for trying to find your cheapest policy. Thank you for watching and supporting the channel.
This video is created by an experienced driving instructor, please subscribe to get my latest videos as I upload them to help you pass the UK Driving Test.
Here is my driving school's website:
www.conquerdriving.co.uk
This video is a guide intended to help people who are learning to drive with a driving instructor in the UK, it is by no means a replacement for driving lessons with an appropriately qualified driving instructor.
Laws and driving rules may be different in your country. The makers of this video cannot be held liable for any consequences caused by any information that is in any way inaccurate, misleading or missing. The makers of this video are not liable for any person's driving other than their own, it is the responsibility of the person driving a vehicle to ensure they drive safely and within the law. The makers of this video are also not liable for any person failing a driving test as a result of the information provided in the video.
00:00 Intro
00:18 What to do if you can't get reverse
00:47 Why it doesn't go in first time
02:05 The crunching sound
03:28 Demonstration
03:40 Why reverse is difficult
04:26 Reverse synchroniser
05:20 Outro

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 202

@_silverword 3 года назад

This is actually perfect timing. I heard this grinding noise for the first time yesterday. Hopefully no permanent damage was done

@ok_so_what8114 Год назад

same

@klompaca 3 года назад

Hah man this is something that should be mandatory in driving school, no one taught me this. When I got my first car a 91 VW Polo, was a bit battered but was super cheap and good for getting me to work it had issues going into reverse, all sorts of clunking, screeching and got forbid the sounds it made. I figured the solution to it and it was going to reverse slowly, if it doesn't click right, back to neutral and so on until it goes in smoothly. I never understood the issue, I just thought it was an old car and many people even mechanics told me the same thing. Fast forward I am in my brand new VW T Roc and would look at that, SAME PROBLEM, although at a much lower scale. This video just opened my eyes. Thank you very much!

@elamefrancis7036 Год назад

I thought as much; “this should be taught in a driving school” You are so right

@recardoklein135 3 года назад

Thank you sir. You know there's alot of things I do when driving that I learned from you. The best one is keeping your clutch for 4 seconds before releasing completely. I used to throw my clutch until you taught me the right way. Your videos helps alot. Thank you 👍

@Big_H2 3 года назад

I find that selecting a normal gear and then going into reverse helps a lot

@ConquerDriving 3 года назад

That can also help, I should have included that.

@JB-jx9bh 3 года назад

Yes go into neutral then go into reverse

@loganmontes5969 2 года назад

Do you think I can go to 5th then reverse?

@JustMe-vn1by 2 года назад

By cchccccccvb

@averyalexander2303 2 года назад

@@loganmontes5969 Any forward gear will work, doesn't matter which one. However, some cars have a lockout to keep you from shifting directly from 5th to reverse when reverse is right below 5th. So if yours won't let you shift from 5th to reverse, just use another gear. Hope this helps

@sauravsen9870 3 года назад

This was very helpful. I encounter this more often than I like on my car. I always thought it was caused by the gear lever not slotting in completely or me not clutching in all the way or the fact that my car's hella old. I'll remember to ease up slotting into reverse the next time. Thanks!

@alexi2460 2 года назад

Best out of the 5 videos I just watched. You saved me 1996 Acura, 200+ miles.

@elamefrancis7036 Год назад

Your vids have been so helpful as I've learnt a lot that wasn't thought or well understood in a driving school. Trying to reverse uphill I've rolled forward a couple of times & quickly held on the brakes then took to neutral & entered the gear again & it went well, I always wondered if at first I entered a wrong gear, thanks Sir!

@kayleighwall6706 Год назад

I've just got my first car after passing and was abit worried because it struggled to get into reverse, this has made me feel alot better now 😁

@MizzenInflerro Год назад

Nice! this helped me a lot. Actually, all your contents did help me at some point, you were the only one who could clearly explain to me how to drive a manual car economically.

@oatesgaming5422 3 года назад

Not related to this particular video but wanted to say thank you. I passed my practical first time today having had just one formal lesson and learning the majority of my technique from your videos. Thanks for all the work you do.

@ConquerDriving 3 года назад

That's fantastic news and great to hear! Congratulations on passing!

@kz0010 3 года назад

Well done, looks like I might have to do the same, is super hard to get lessons at the moment, but would be nice if I can pass this way. @@ConquerDriving Your videos are really good, and helps a lot, I got some miss information from drivers those drive for a long time now, so hopefully i can get 1 or 2 lesson I think that would be good enough so I will know what I have to improve on. 😉

@laineotto1376 3 года назад

I always swear in my car because it won't go in. The eternal question has been answered, thank you!!

@AqueousYT Год назад

Passed my practical test on august 1st, but still watching your videos! I've been driving on my own a lot since passing but have recently experienced that grinding noise when reversing. It makes a lot of sense that my car is still spinning from inertia while I'm trying to put it into reverse, so I'll give it some extra time!

@ConquerDriving Год назад

Congratulations on passing and thank you for continuing to watch!

@skynhuman Год назад

Thanks for the detailed explanation! This happens to my car too, but the grinding sound only happen occaionally. I know that's really harming the gear box but don't know why it happened and how to avoid it. Thanks for your suggestion I will now wait a few seconds before select the reverse gear!

@patrykrog8121 3 года назад

Well i been grinding it for like 2 weeks before i figured it out. You made this video 3 weeks too late. Passed 3 weeks ago but luckily now i figured it out.

@ConquerDriving 3 года назад

Congratulations on passing!

@MsVivian99 Год назад

Really really helpful ! I had no idea! Many thanks for covering this!

@gathukumatheri8091 3 года назад

Thanks goodness for this video. Been struggling with that crunch on reverse

@Gouthamit24 3 года назад

Loved the topic....Very informative. I thought that my nano has only that issue of reverse gear.

@fannymagnet7518 3 года назад

As always, loved the video Very helpful

@davidmacbook 3 года назад

great video again Bravo, I do find the ford fiesta can be tricky sometimes

@fayzurrahman4243 3 года назад

i thought you started doing core exercise videos when I saw "reverse crunch"

@ConquerDriving 3 года назад

😂

@RohitKumar-qt1hr 3 года назад

Thanks for explaining this so easy way.

@whizzofthenorth7438 Год назад

Cheers this mate passed a month ago, hasn't happend too many time but I felt like I was doing something wrong and completely wrecking the gear box so hopefully from now I shouldn't be damaging the gear box any more

@uselesvideo 2 месяца назад

Thanks a ton for the video, I just got my first car, a ford focus MK1 2000 1.8L petrol; and the reverse gear selection is quite painful, it doesnt always wanna go in, more like the 50/50 case you said. I was searching for fixes online and your video showed up, seems like this is a skill issue. Gotta change the transmission oil I reckon. Also Thank you so much for all the videos, you really helped me with passing my drivers license test here in Luxembourg :D

@jackcolinlowe710 3 года назад

I’ve just booked my first driving lesson! YAYYAYAAYYYAAYAY! 😄

@ConquerDriving 3 года назад

I hope you enjoy it.

@tonyedler8931 2 года назад

The synchro ring is what slow the gears down to allow the engagement of the gears. I recommend a 3 count to allow for proper engagement. 1 potato 2 potato 3 potato. It works every time.

@GuruBlogs1 2 года назад

I am from India, car gears box maybe slightly different.... But your point really make sense to me... I also had experience of nasty sound when I put reverse gear without waiting much time after stopping....

@inbetweennature 3 года назад

A common issue faced by most of the drivers...feeling good to understand the logic behind the problem n at the same time, its solution...👍

@HoudalothAli 11 месяцев назад

Great explanation. Had this few times. Now I know.

@Cryo._. 3 года назад

I passed my test with 0 faults after 12 hours of lessons. I feel so good lol

@ConquerDriving 3 года назад

Congratulations!

@mechtarin 3 года назад

I finally got my driving license thank you

@ConquerDriving 3 года назад

Congratulations!

@richarddalupang3095 3 года назад

Thank you Sir for sharing

@nandagopalm849 3 года назад

Very useful video..👍

@sniperjordan8216 Год назад

Very helpful thanks

@loc4725 2 года назад

Can also be damaged reverse gear. Mine (2002 Citroen) quite often doesn't go into reverse and needs some help with alignment, i.e. a touch of first gear, stop and then it works.

@titaniumdiveknife 3 года назад

Much respect.

@user-kq3vd5fm2j 2 месяца назад

Soo useful video .. thank u ❤

@James-om2zj 3 года назад

And if you keep ending up in 1st gear when you wanted reverse, there might be a lever on the back of the gear stick that you have to lift up first 🙃 when I got my first car this took me a solid 10 minutes to figure out as I kept inching further forwards wondering where reverse gear has gone 🤦‍♂️

@ConquerDriving 3 года назад

Yes, you do have to lift a leaver on some. Other only require you to force it left hard - BMW.

@Dr.Kornelius 3 года назад

I've had the same, ended up bumping against kerb for 5 minutes :D

@bntagrl978 3 года назад

Only going forward because we can’t find reverse 😂

@DanishAnsari-wc6zw 3 года назад

Thanks I needed this. I thought it was just with my car who has a hard time going into reverse

@Mo-on2sz 2 года назад

Thank you! Problem solved!

@Yahya_medic Год назад

thanks for the info. In my manual BMW 3 series, the reverse gear disengages or slips back to neutral by itself, it's happening very often now, any idea why ? please

@soundsidecolour Год назад

For a split second at 3:29 I thought you had your feet up on the dash 😂

@Omgkhii 10 дней назад

😂😂😂

@tejaspadhye Год назад

for my gearbox, going into 1st before reversing helps, on other occasions, 3rd gear helps

@borutcucek8988 Год назад

lol big thnx i buy used SEAT Toledo 2014 and i tought my gear box is demage. But if i do what u say all works fine. thnx mate.

@AA-ni1lg 3 года назад

Thanks sir

@BeNeDdO 3 месяца назад

Thank god for this thought a new clutch was needed 😂

@dulip3532 Год назад

thank you adamc

@Mnck01377 7 месяцев назад

This might sound silly, but sometimes when Im at standstill and fully press the clutch and select 4th gear (not releasing the clutch at any point) I hear that crunching sound for a milisecond. I know youre not supposed to select such high gear while stationary but I thought you could select whatever as long as you dont release the clutch....?

@EnVildKat Год назад

What if you select 1st or reverse and grinding starts when you try to move? It's a new car, 2022 Kodiaq 1.5TSI 6 speed manual and service center tries to blame it to a low milage. 6th hard to engage at high speed too. It's the worst manual I ever driven.

@iwanjoness 3 года назад

This is a common issue on the MK7 Ford Fiestas, make sure you fully engage the clutch for 3 seconds before changing gear

@ConquerDriving 3 года назад

I find the Fiesta in general struggles with this.

@ChrisChronos Год назад

Wow, I had no idea! I was so confused, doing everything correctly and still hearing a crunch every now and then. my golf is only 4 years old, I was worried I had already broke it. Thank you for clarifying why this happens, I will make sure to not force reverse again and follow your advice 😁👌

@ConquerDriving Год назад

If you have crunched it many times, I would recommend a gear oil change to be safe.

@ChrisChronos Год назад

@@ConquerDriving it's happened about 3 times to me so far. I'll make sure to change oil in future. Thank you for all the advice!

@ParcoLee Год назад

I've heard that reverse gear in a hybrid car or electric car is just reversing the electrodes from + to - inputting into traction motor(s). At least the first move in motors in a hybrid car before the ICE kicking in. I have no idea if it's true. They say that's why both hybrid cars and electric cars could be shifted to R gear suddenly from D gear while the car is still going forward. The motor will extremely harshly brake your car and pull your car backward suddenly, which might fastest stop your car and save you from emergency critical situation if any all other braking ways even aren't fast enough to stop. But I have to verify and find out anyway.

@arandomseal1728 3 года назад

In my driving instructor's Kia Ceed I've never struggled with that, maybe it's because in his car in order to reach Reverse Gear you need to press a button located in the stick instead of pushing the stick down.

@ConquerDriving 3 года назад

It will either be luck or it has a synchro on reverse.

@jawadtruckersmp8104 3 года назад

I Love your video's man, i just want to ask you about something I'm considering Buying a 2018 2L turbo diesel Seat leon fr should i go for it? also it is going to be my first car .

@ConquerDriving 3 года назад

Thank you. If it's in your budget and you like it then that's what matters most.

@jawadtruckersmp8104 3 года назад

@@ConquerDriving it is in my budget i just asked you if it is a good car as you own one also is it decent for new driver? cheers from france

@AUaudits 3 месяца назад

My Fiat 500L does it. When cold, the clutch judders. It is little Jerky when warm. At just over 100,000 miles, I suspect I need full clutch kit in near future.

@laszlod3126 3 года назад

hi. would you be able to do a comparison in reversing or parking techniques with a saloon vs hatchback? i own a saloon and sometimes it is difficult to judge on how far i can go back as the boot protrudes further from the rear window and i dont really have parking sensors. i just passed my driving test the other week but i watched most of your videos to become better as i still have some drivers anxiety and feel like i dont deserve to have a license just yet. thanks 🙂

@ConquerDriving 3 года назад

Maybe this video can help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-uMGpAo-flbE.html And this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NhdQp-Hmds4.html

@laszlod3126 3 года назад

@@ConquerDriving thanks, i will go watch them now

@jackykoning 9 месяцев назад

If it didn't want to go in reverse I usually just lifted the clutch a tiny amount while pushing the gear lever hard. I never heard a grinding noise with that. But I can see how that is probably depending on the type of car. So I guess don't do as I do :) Now I basically only drive automatics so its not really a concern for me anymore.

@_monti142 2 года назад

I selected reverse gear before coming to a stop in a 2012 Volkswagen polo and to my horror I heard a grinding noise I was confused at first because I had pressed in the clutch fully in, the thing is that the gearbox received power from the spinning wheels and that made it grind, no synchros on reverse, must stop before selecting reverse

@ConquerDriving 2 года назад

Yes, I've done that before too, best be stationary before selecting reverse.

@naimamanzoor5412 3 года назад

Hi, you're too good in explaining, where do you teach learning, can i have you as my driving instructor please, I'm from Sheffield Uk

@ConquerDriving 3 года назад

Thank you. I'm in Colchester, but I wish you the best of luck.

@naimamanzoor5412 3 года назад

@@ConquerDriving Thanks for replying and wishing me good luck

@MileytheJeepV2 2 года назад

My jeep will grind reverse almost every time i try and its picky about first but i found a sweet spot gotta get it while your rolling really slow but before you stop

@aaferozferoz3959 3 года назад

I thought that my car gear box is having problem, now i understood.

@faisal336 3 года назад

Kindly make video for beginners for uphill drive and downhill specially for auto transmission cars

@ConquerDriving 3 года назад

I may do in the future, in the meantime, this video may help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kTZCinivLco.html

@mroahueater2193 2 месяца назад

Can i do this on my lexus is 250 2007 model ??

@seberous 3 года назад

Just out of interest, you were saying you had an Ibiza before the leon, but didn't have it for as long as the current car. How come you only kep that one for a few years, and this one has been wiht you for 8+ now. Do you intend on replacing it soon, or are you going to keep it going until its uneconomical to keep on the road? Maybe a video about how you started the driving school and the cars you've had to teach in (and maybe even personally) would be a cool video.

@ConquerDriving 3 года назад

I changed to the Ibiza simply because I tried the Leon and preferred it. I've kept the Leon for ages because there is nothing new yet that has tempted me away from it. I'll change it when there is something else that I prefer within my budget, but for now it's still as good as the day I bought it.

@seberous 3 года назад

@@ConquerDriving my instructor keeps his cars for a long time too. He was saying he buys them when they a couple years old, with not many miles, and lets the learners rip them apart. He takes good care of them, but says there's no benefit to having a newer one. To be fair, that generation of Leon still has a very modern look today. Doesn't show its age with the styling whatsoever.

@osasosas2982 2 года назад

actually there's another way to prevent the grind. select any forward gear which should stop the transmission and then select reverse. i keep forgetting this and i grind my reverse gear all the time.

@karlahluiz1173 3 года назад

is it true that if you’re on your driving test and someone flashes their light for you to go and you go is an instant fail? some people have failed for this, doesn’t really make sense to me as if they’re slowing down and holding up traffic to help you make progress and you don’t go that would make more sense?

@ConquerDriving 3 года назад

That's definitely not true. Only go of it's safe though, just because someone flashes their lights doesn't mean it's safe, someone else's could be coming.

@wes1934 3 месяца назад

yeah, I've found i have to go to 1st gear first and then reverse to get reverse to work smoother

@Helloacx 2 года назад

Can I ask how bad the noise can mean? It happened to me first time today.. guess I “Forced” the stick to reverse gear 1 or 2times, used all my strength … then in the afternoon I was driving normal, I heard again (2 seconds)… thought sth wrong with my car till found this vedio of yours.. … So say there is now chipped metal/shaving in the oil, caused more damage already? Do I get mechanic to remove the chipped metal? Not sure if there is such service.. just scared of the idea I need to pay for new gear box …😕

@ConquerDriving 2 года назад

Nearly all car's would have had a bit of grinding here and there. Try to avoid it as much as you can but there are usually magnets in the gearbox to catch the metal particles. If it's working fine I wouldn't worry about it.

@elamefrancis7036 Год назад

Question: I've seen alot of drivers especially commercial taxi drivers trying to quickly maneuver hardly come to a full stop before selecting reverse & back to 1st gear & if you're like me you'd like it & do it too, does that mean all these guys have been doing the wrong thing & damaging their gears?

@ConquerDriving Год назад

Some gearboxes have a synchro on reverse so you don't need to come to a complete stop.

@jailedcat4417 Год назад

Does your clutch going bad has anything to do with this? Because here we get told by the mechanics that the clutch is worn out everytime we hear a crunch. My Hyundai Xcent now often gets a crunch on reverse and was told that a clutch needs to be done.

@ConquerDriving Год назад

It can be a clutch related issue, but not due to wear, if the clutch is damaged then it will affect all gears.

@Chaitanya-lp1cq 19 дней назад

Does accidentally grinding gear once in a while cause damage?

@konchady1 2 года назад

Excellent explanation as always. I did have a query. Is this issue more prevalent in gearboxes with R (reverse gear) close to 1 or R close to highest gear ? Incidentally this happened to me when I was reversing a relative's car (which was pretty old) but I thought it was something I did. That car had R close to 5 (the highest gear).

@ConquerDriving 2 года назад

I haven't noticed a difference.

@amrdel2730 2 года назад

So u got an ibiza 2004 then ibiza 2010 and this car u teachin in now is a seat leon 2014 ? U seam to like seats ? Are they tgat good compared to others of same category like fiesta polos golfs ??

@ConquerDriving 2 года назад

I had a 2003 Ibiza. I think they're good cars for my needs. Different cars suit different people. At the moment though my favourite segment C car is the new Mazda 3. I'm not a fan of the new Leon's design and interior.

@leo147leo Год назад

How about when I stopped my car and press down the clutch then try to shift in 1, 2, and then 3 gear. The first two gears are easy to shift in but I often find it hard to shift into 3 gear.

@ConquerDriving Год назад

That's unusual. Normally higher gears are easier to select. But when the wheels are still don't read into it too much. As long as it goes into 3rd fine when you're moving then it should be OK.

@Blu12929 2 года назад

I don’t seem to have ever encountered this? Idk if it’s cuz I only have a 5 speed gearbox so I don’t need to press down or anything.

@ConquerDriving 2 года назад

It probably has a synchro on reverse so you won't get the problem.

@SBridge11100 10 месяцев назад

was driving earlier and i was approaching a roundabout i was going from 3rd to 2nd but selected reverse by mistake( dont ask how!) and heard that grinding noise!

@carlemilcarl6249 Год назад

i just had my clutch replaced. but i still get that crunch when i select reverse when the car is cold. any idea to why, should not be the clutch or maybe the mechanic did something wrong

@ConquerDriving Год назад

The crunch into reverse is unlikely because of the clutch. Only select reverse when you are completely still and have had the clutch fully down for at least 3 seconds.

@almatsailaukhan9181 3 года назад

oh man, when i put it in revese for the first time, i slowly let out the clutch until it was engaged and thought "why am i not moving" and then heard crunching... too gentle with the gear stick

@ConquerDriving 3 года назад

That can happen, sometimes it's easier to put it into gear than other times. Most cars are like this.

@barbapati7158 2 года назад

i don´t know why but when i first start my car it does a noice when putting reverse but after a while driving it doesn´t does the crunch noise. Putting reverse slowly and without moving doesn´t solve it

@ConquerDriving 2 года назад

Perhaps your clutch isn't disengaging properly? Make sure the clutch is fully down and wait 2 seconds after pressing the clutch down to put it in reverse.

@VSTV1993 3 года назад

When i can't get reverse, i select 1st and then it goes into reverse or let the car roll a bit and then it selects reverse

@ConquerDriving 3 года назад

That also works.

@danielkafweko6381 3 года назад

Hi Everybody I have a specific question according to car engines fabrication...In every car engines, do gears have the same amount of teeth? Could be two different cars that includes similar transmission

@ConquerDriving 3 года назад

They are many different transmissions with different teeth but there are plenty of transmissions that are shared with many different models of car.

@danielkafweko6381 3 года назад

@@ConquerDriving Thanks for replying I just wanted to make sure I got it right so the answer is There are many different transmission with different teeth depending on the car model and there are plenty of transmissions that are shared with others car models could be two cars have the same transmission as automatic or either manual...🙏Please really need it

@shamtradtam3769 2 года назад

Can you say why the reverse gear is very fast even without pressing gas pedal?

@ConquerDriving 2 года назад

Some engines add gas for you when in reverse to help you reverse without pressing the gas pedal.

@MianCowell 3 года назад

Hi CD. My theory test expires on the 7th august but my twice delayed practical test is booked for the 13th. What should I do?

@ConquerDriving 3 года назад

It's odd that you've been able to book the practical for when you have an expired theory. You will need to pass the theory test again before the practical test.

@MianCowell 3 года назад

@@ConquerDriving I feared that was the case. It's the DVSA re-booking my test that was meant to be in February. I guess they don't take the date of the theory test into account for that.

@benja_benjie 3 года назад

My Toyota hilux 2019 model 6 gears always spins tyres and makes noise and the gear shift locks itself when I make a mistake of selecting wrong gear let's say from 5 directly to gear 1 is it normal

@ConquerDriving 3 года назад

I'm not sure exactly what's happening to be able to comment. But wheel spin is normally too much gas and lifting the clutch up to quickly. It shouldn't happen simply because you have selected 1st gear when you're less than 5mph.

@benja_benjie 3 года назад

@@ConquerDriving the front wheels just slide with no gas added to it because I don't add gas while changing gears maybe I lift the clutch way up quickly

@Ari-hh4bw 2 года назад

So what happen if im in 1st gear and directly move to reverse (while pressing clutch only once) ?

@ConquerDriving 2 года назад

That's fine, it's best to hold the clutch down for a second before selecting reverse though.

@ConquerDriving 2 года назад

That's fine, it's best to hold the clutch down for a second before selecting reverse though.

@Ari-hh4bw 2 года назад

@@ConquerDriving Thanks sir !

@kapothegod 2 года назад

still in my first week of driving manual and that awful sound happened when i was about to leave today and i just switched cars i was so worried😂😂

@MkTainment 3 года назад

Bro plz make video on how to stop wheel spin or slip while driving in uphill driving

@takatoekoe 3 года назад

don't add too much gas

@ConquerDriving 3 года назад

Wheel spinning uphill suggests the car or tyres not appropriate for the hill. Or you are trying to accelerate too quick.

@ryanb50 7 месяцев назад

So it’s not necessarily an issue with the gearbox or something

@arinzevictory4040 Год назад

Please is there a video on how to reverse?

@ConquerDriving Год назад

This playlist may help: ru-vid.com/group/PLnM8RR0dumuaXANGQjdhcPgMkqgrv3OT_

@CatsForLife21 Месяц назад

Thanks. #OneMessageFoundation

@maxstafford4007 Год назад

Neautral, hand break up. Clutch wait move in to reverse. If failed do it again

@maxdefault1517 2 года назад

I step on the clutch while in motion and my gears lash I can’t figure out what Is wrong. Rebuilt the transmission and 4 thousand dollars later and it’s still doing it. I need help

@ConquerDriving 2 года назад

That is odd, maybe the clutch isn't fully disengaging but I'm sure you would be aware of that. Perhaps the gearbox is still bad. Not a lot else it can be unless you're not pressing the clutch all the way down.

@maxdefault1517 2 года назад

@@ConquerDriving oh I’m pressing the clutch all the way down and the gear box is completely rebuilt I just spent 4 thousand dollars on that. Could the clutch not be disengaging properly and it’s a bad slave cylinder maybe??

@nevinkuser9892 Год назад

So you're telling me the solution is more patience 😅. My old 82 corolla used to go into reverse magnificently while still rolling forward. Any 2015 Toyota doesn't work the same. It just won't.

@ConquerDriving Год назад

Some older cars seem to have a synchro on reverse, new cars don't seem to.

@AA-ni1lg 3 года назад

Love from India

@muhammadwasea9189 3 года назад

Love from pakistan mate

@fejs-2272 3 года назад

I usually have gear 1 selected then go to reverse and that way no crunch sound occurs, atleast for me

@ConquerDriving 3 года назад

That will help, but it means you have to select 1st.

@christopherledix1247 Год назад

I love you

@powwow6680 Год назад

what is the fix for the grinding?

@ConquerDriving Год назад

There is no fix for reverse gear grinding because it's not broken it's just how it's designed. However, you can avoid it as explained in the video

@ConquerDriving Год назад

But if you mean "what is the fix if you grind your gears away", it would be a very expensive gearbox rebuild.

@mbsmile78 3 года назад

@Conquer Driving howcome many driving instructors only do Manual, would love Auto video lessons.

@ConquerDriving 3 года назад

There are more videos to make about Manual and over 90% of people in the UK still learn manual.

@mbsmile78 3 года назад

Please can you do a comprehensive one off video on Automatic driving or do you only have Manual car. Really like your videos and commentary.

@cv4809 3 года назад

If you need lessons for driving auto, you should probably not drive at all

@Traveler-rf8ye 3 года назад

@@cv4809 I'll never understand why some people feel superior, because they drive manual. If you actually have a license you would understand that driving is not just about changing gears it's a small percentage. Paying attention to the road, analysing the situation, understanding what going on on the street, defensive driving etc etc etc is a HUGE part of driving. Braking, changing gears and parking is certainly not all there is to driving. I live in a country where you can only get your license in a manual, but there are still many accidents, because of people like you who think driving is just about steering the car🤦🏽‍♀️. I could care less if a person is driving an auto or manual as long as they are safe and adhere to the rules of the road.

@TwenOalley 3 года назад

@@mbsmile78 There's nothing specific to autos that you need to learn. If you can drive a manual, you can drive an automatic. Literally just put the car in D and drive with the accelerator and breaks. You can never stall, and you don't have to shift. The only advice I can give is consider using the lower gears for very long downhill roads. (www.allstate.com/tr/car-insurance/safety-tips-mountain-driving.aspx ) Also, don't coast with the car in neutral if you're using an auto, just stay in drive. Even at traffic lights, just stay in drive and hold the breaks.

@igorksenzov 2 года назад

I have the same problem with 1st gear. Anyone my know how to fix it?

@ConquerDriving 2 года назад

If it's grinding only in first gear then you likely have a problem with your gearbox.

@igorksenzov 2 года назад

@@ConquerDriving when I press clutch and wait for 5 sec. I can turn first gear.

@katacc7629 2 года назад

I accidentally did this as a result of muscle memory. I was slowing down and instead of switching from 3rd to 1st, I accidentally switched to reverse and it made a scary grinding/crunching noise.. i'm hoping my car is fine and nothing is damaged but now I am paranoid! Please someone reassure me that my car is gonna be fine! It's the first time I've done it and I'm scared to hell to drive it again after that😭

@ConquerDriving 2 года назад

Doing this will cause damage to your gearbox, but if it's still working that's the main thing, best to change the gear oil as metal particles will be in the oil causing abrasion. There are usually magnets at the bottom of the gear box to catch these metal particles but I wouldn't rely on them.

@katacc7629 2 года назад

@@ConquerDriving My car is a Mazda 2 and it's driving fine and changing gears fine. When I did it, I was at a slow speed so I'm hoping it's not damaged the gear box too much. Will it be better to take it around to the garage and have it looked at then? Thanks for replying!