REVIEW: Matrix 5000 Motors (Godzilla and Sonic) 

Took apart my Godzilla and mine also has 24 written on the armature. The trigger response is so ridiculous... I'm running some 13:1 no name helical gears, m115 spring, the godzilla, and a 45c-90c 11.1v. You just touch the trigger and out comes a loud ass snap followed by the tears of small children. Oh and a Gate MERF 3.2 mosfet. My fields chrono says I'm at 19 rps at 390 fps, and that's plenty for what I need it for.

I have the Godzilla in my ak47 ..it's a beast of a motor. After a while it will lighten up a little

Hey! I think you're right about the number written on the armatures indicating the TPA. I just re-watched this video, and the sonic armature had the number 10, whereas the Godzilla motor had the number 24 written on it. That stuff is super good to know, and I do think they did it for that specific reason. Good call!

Also, the shinier retention ring would mean a different material was used. Hopefully it is steel, increasing the durability of the Godzilla motor. The steel ring may have been omitted from the Sonic motor to cut down build costs, as it would not be as necessary in a low torque, high speed setup.

Hello! I'm new to gearboxes and the internals of aegs. I currently own a g&p magpul sentry. It runs on a m120 motor which is decent in full auto but abit sluggish in semi. I want a good trigger response as I play tons of Cqb and I crisp the trigger response is in some of the videos on RU-vid. I don't want to break up the gearbox, so should I put in a high torque motor to gets a good trigger response? By the way, the battery I'm running is a 7.4 as it was said that using 11.1 will wreck the gearbox quicker. But with the new high torque motor in do you recommend using 11.1 or 7.4? Also what motor do you suggestions getting? Great Vids and keep up the good work! Looking foward to you to replying, thanks!

Dude sweet vid! Subscribed! And awesome gun. I LOVE the way it sounds its a clean fast response. How did you get it like that? I want mine to give me a response like that. I installed a lonex Titan a1motor and a Prometheus m120 spring in my g&p version 2 gb it has stock g&p gears. Its on a 9.6 nimh. What else should I do?

If in fact the 24 on the Godzilla 5000 does mean 24 TPA, then the sonic 5000 is 10 TPA like you had guessed. It can be seen at 16:05

Hey, I love your videos and was wondering a few things... Just bought a VFC Hk 416 and want to upgrade it to be a zippy, crisp trigger response. I just want the rps to be above 15 and below 35 and want to know if these upgrades are good and what else I could buy. I just bought a POM piston by magicbox, a lonex A2 motor, a new spring guide and M100 spring, a Lonex piston head, a 3/16 sorbo pad and a neoprine pad to go with it, a magic box cylinder head, some o rings, and some matrix shims. I want to know if the VFC gears are good enough to keep or if i should go to a 13:1 or 14:1 ratio...? I was wondering if the Burst Wizard King Kong super 2 mosfet would be good as well... I just want to make this gun perfect as it is my first custom internally built gun. It is a V2 gearbox and everything else is stock besides what i listed. Please let me know what else to get to perfect the gun and get the quickest trigger response possible. If you could, email me at lmjustgoud@gmail.com as it would be greatly appreciated!

valleyriverarms i just bought my gp m4 cqbr and i was thinking about upgrading it to something like your gun (the one you showed in this vid). So can you give me any advices about the parts i should buy and things i should do like shimming (im not sure if it's shimming in english)?

If anyone is still looking for high torque motors, ZCI HTs are 22 TPA according to what Ben posted on Clandestine.

Hey, I'm making my VFC 417 into a DMR. I want it to be firing around 500 fps (give or take 10 fps) but this is my first time trying a build like this so I'm not too sure what motor to use. I installed an M140 spring in the gun, and I've been told that the internal components of the gun are good enough to handle it, so I haven't changed any of those out. I'm going to put a longer inner barrel in as well. For a motor, what would you recommend I use? Rate of fire is not too big of a concern with this build, but I'd like the trigger response to be somewhat snappy. Any advice would be awesome. Love your videos dude

Great insight into these motors. Thumbs up :)

Can you make a video on going over your gearbox for the gun that you showed us for testing the motors?

In the past, I tried to do a custom motor with my matrix turbo motor and my classic army neo magnets torque motor. The problem here is... My shaft bended.lol I don't know if you have any laying around in your room because I'm curious how it will sound if you put the matrix armature with the neo magnets shell. Mixing high speed with power. That should be over kill. 1,000 rps. lol But yeah... I'm serious, though.

Should I get a Lonex speed and torque?

Kinda of a dumb question but i have got a stock lonex m4 and the stock motor it has seams like it is having an issue turning the gears , it locks up really easy, the trigger pull and response are really bad, would you possibly recommend this motor or another ? i am looking for a nice trigger response. Thanks

also one more thing, i've recently installed a spectre mosfet into my gun and i'm really worried about the settings and i'm having trouble understanding it in general. the motor breaking, rof control and precocking are mainly the settings that confuse me the most. what do you recommend using in general? (just for reference, my setup is a A1 motor with a pretty much complete lonex sp120 mechbox. i only switched out the piston for a SHS one and added a sorbo pad to allign the teeth engagement with the piston) i mainly intend on using the gun for single fire. it would be awesome if you can help out, thx a bunch! awesome gun btw! scary actually. 

I'm pretty sure you've tested my rifle out at evike haha. I'm looking for a high rpm high torque motor for my 13:1 build. I've had a stock kwa motor in there for a while, but I believe it's time to swap it out for a higher/reliable rpm rating. What would you recommend ?

Should I get the Godzilla 5000 or the Lonex TITAN Motor - Torque & Speed? My plan is get one of those with a SHS 13:1 gears, ASCU GEN3+, 11.1 lipo 2000 mah 25c-50c, with stock vfc vr16 spring. What would be my RPS on that? I'm going for a quick simi trigger pull. RPS isn't a big deal. Please help me and let me know thanks!!!!!

And also whats the difference between torque and speed?

I just bought the Godzilla High torque for my Echo 1 XCR DMR build. Im running a 7.4v lipo and stock internals. I plan on upgrading to the Ares Amoeba gearbox as well. I have the evike avocado-II burst controller and MOSFET on order, but im unsure if I will need a MOSFET that will stop trigger contact arching. Any help is appreciated.

Quick question im trying to put a godzilla in my jg m4 with stock internals and run a 9.6v do you think ill need a delayer chip? Sinve the rate of fire seems kind of low i figured i asked before i took anything apart

Honestly dude, your ears are right to say that is does ramp up the speed the longer you shoot, cause I have a matrix 3000 Turbo motor too in my m27 IAR and it does the same thing!

I'am buying a new m4 350$ budget. What company would you recommend? Please help... I was thinking crytech or KWA.

Hey, I have a Krytac PDW, and I want to put a Matrix SONIC motor like the one in the video. The spring in the PDW will be an M110, and the rest of the gears will be stock Krytac. I will run this on either an 11.1 or a 7.4 depending on what I buy, and how much does this motor heat up and will it fail anytime soon?

can you make a review and list of the items you used to make the gun you showed on evike with the seigetek gears please? and you sir earned a new subscriber :)

how does the Matrix magnum compare to the ZCI balance motor? im gonna be running standard G&P gears and an M120 spring.

Me likey that FT. I have a Turbo neo can and a Chaoli motor and a friend who will combine them for me, but what TPA and what would you say to wind to and ratio gears to get if I want 10-15 RPS on a 7.4 and m115 sping?

Do you have a review of the satan high speed motor?

Hi, i have a kwa sr10. Made some upgrades including piston, cilinder, piston head, spring guide... I want to put a Guarder SP160 on it. Would you recommend me the godzilla súper ht?

If i got the Godzilla 5000 motor, threw it into an Elite Force M4 CQC Comp AEG (2014), what spring, piston (head and Cylinder too), Gearbox, Gears, Bearings, Buckings and Spring Guide should i have? Unless some of the stock parts are fine. Thanks for any help!

Question, I have a Echo1 Red Star RPK with SHS 16:1 gears, chrono'd at 19.9 RPS today exactly.. I'm looking to get around 25-30RPS which would be a better motor the 3000 Torque or the 5000 Godzilla

I have a stock g&g r8-l and i only use semi. What motor would u recommend to shoot faster on semi?

i have a jg ak74u ebb, i run an 8.4v with nothing but an aftermarket battery done to it. Im debating on wether or not i should get an upgraded motor?

HELLO!!!! I've been looking into airsoft motors a lot for a project in Australia (airsoft is banned). I was hoping to get some accurate metric measurements on the Godzilla 5000 short motor... I want to see if it can work with a JM M4 gell gun build. Any help/info would be greatly appreciated ^_^

Awesome Review bro !! can you do video of motor disassembly?

Have you tried the Evike Monster Motor?

What grease/lube do you use in your guns?

Can I put the matrix 5000 high speed motor in my lancer tactical lt-19b?

How many rps do you think a 14:1 single stroke m120 echo 1 platinum m4 would get with a Godzilla 5000 and a 3000 magnum motor?

advice on a good balanced motor? looking for a reliable motor with decent trigger response and about 20rps. m120 spring 18:1 G&p sector, G&g bevel and spur aluminum air nozzle and cylinder head shs lightweight 14 steel tooth piston ball bearing spring guide and ball bearing pom piston head battery 7.4 20-40c 1800mah

What size spring is recommend to use with a high speed infinity motor with 13:1 shs gears?

Man 10/1 and high tork ? Seems it Should really have better trigger response

Sonic 7:31 Godzilla 10:36

Will they work for the Lancer Tactical gen 2 lt 25 spr?

By the way im running a venom 11.1v 20c lipo and using a 425mm 6.03 inner barrel. My goal is about 500fps with a nice trigger response

I have all stock internals in my KWA do u think I will have to get my my gears shimmed or install a mosfet to make sure that the gears don't fail. PLEASE RESPOND

You're so beautiful.....

will his work in a stock G&G combat machine?

What is a TPA I've been hearing it a lot recently

Will they work on a m14 ebr battlefield edition ?

So a speed motor is for ROF and a high torque motor is for range?

Is it ok to use a matrix 3000 turbo with stock internals?

Great video. If the Godzilla really is 24tpa I may just go ahead and pick one up. I was looking at getting a zci, but I have been hearing that they burn out on occasion. In terms of the markings the sonic has "10" written on the armature, similarly to how the "24" is written on the Godzilla. I suppose there is a chance that those are potential tpa numbers. Anyways, great job, look forward to the next video.

is the godzilla really 24 tpa?

What battery mah were you using?

could i run an echo max torque motor with an m130 and 13:1 gears?

So if i want better trigger response the Godzilla

Have a Godzilla but I'm getting a Sonic due to the Godzilla low rps even on my 13:1 ssg

what does TPA stand for?

Is it fine Sonic 3000 to 1600 battery?

Whats ur fps?

7:17.

Which one is best

Great reviews!

Btw love the new video skim!

Great vid. Btw.

I'm sold just because it's called the Godzilla

It ain't good to dry fire your rifle also nice setup

Next time just use a damn chrono...we need numbers not feelings.

valleyriverarms i just bought my gp m4 cqbr and i was thinking about upgrading it to something like your gun (the one you showed in this vid). So can you give me any advices about the parts i should buy and things i should do like shimming (im not sure if it's shimming in english)?

I use a 11.1 20c lipo. what kind or rof am I going to get with the Godzilla 5000 and a m120 spring