Review of 20 accessories for your MFT-style workbench! Part 2

Подписаться 174 тыс.

Просмотров 85 тыс.

50% 1

This is PART 2 of the video about all the dog hole accessories I could get. It is a short overview of all possible accessories and how to get the most out of your MFT-style workbench.
Plans of my workbench and other shop improvement products I designed can be found on my website.
hookedonwood.o...
More information about the products used in this video you can find here:
BenchDog Tools
Benchdog Tools has an extensive assortment of Bench dogs ,and everything to turn your workbench into an accurate table saw! The products are of high quality, and I can recommend them all.
Fence systems. benchdogs.co.u...
Rail Square: benchdogs.co.u...
Quad dogs: benchdogs.co.u...
B-Stop: benchdogs.co.u...
Benchdog tools Magnetic plugs: benchdogs.co.u...
Benchdog tools chamfer tool: benchdogs.co.u...
UJK
UJK Parf Guide system
www.tagserve.c...
UJK Fence
www.tagserve.c...
UJK support dogs: www.tagserve.c...
Ruwi support rails
ruwi.de/en/sho...
Specific links
Bessey WNS set: amzn.to/45GquMt
Veiko Rail Guide Clamps: www.banggood.c...
Hold Down CLamp: www.banggood.c...
Hold Down Clamp Long: www.banggood.c...
-----------------------------------------------------------------------------------------------------------
My Personal Banggood favorite of all time!
1. Hongdui Edge Trimmer
www.banggood.c...
2. Doweling Jig / Multi-row puncher
www.banggood.c...
3. 20-watt diode laser
www.banggood.c...
4. Drill guide cabinet jig
www.banggood.c...
5. T-ruler
www.banggood.c...
6. Precision square
www.banggood.c...
7. Miter square
www.banggood.c...
8. Miter square brass
www.banggood.c...
9. Height gauge
www.banggood.c...
-------------------------------------------------------------------------------------
My name is Dennis and I am from Hooked on Wood.
Subscribe to my channel!
www.youtube.co....
My RU-vid channel is a hobby. This means I try to upload 1 a 2 video's a month. But this is not at a specific schedule. So If you do not want to miss my videos. Subscribe and click the notification.
Products I use in my workshop.
Table saw with dust system:
Felder 740S Slider
Felder 140
Workbench:
Incra master-R-router lift
AEG 1400w router
Incra 25" SL positioner with Wonder Fence
Drill press: Jet JDP 15B
Miter saw: Festool Kapex 60
Different links to products I use
Clamps:
Axminster trade hold-down clamps
Piher Rail guide clamps
Micro Jig dovetail clamps
Bessey parallel clamps
Axminster trade parallel clamps
Push blocks
Micro Jig Gripper
Incra Push block
Thank you for viewing.
Best regards,
Dennis

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 94

@Marcus_Caius Год назад

Nice list, you never go wrong with BenchDog tools. Raising your board or using a t-track on a MFT is missing one of it's BEST feature. No tear out on bottom 😱

@kristofer_ 7 месяцев назад

I don't quite understand - don't you put a sacrificial piece under your workpiece to prevent tearout? Would an empty space like the one in the t-track not increase tearout and also worsen dust extraction of the plunge saw?

@uhN0id 5 месяцев назад

@@kristofer_ to me that's what it sounds like they're saying

@nmancini 11 месяцев назад

Wow Dennis your channel has really grown, you’ve built a great community and thank you for sharing these mft accessories

@MCsCreations Год назад

Thanks a bunch for the reviews, Dennis! Really fantastic products! 😃 Stay safe there with your family! 🖖😊

@barrydoxseyuk Год назад

Another great video!! It has me thinking, inserts that slide into the T track! Then, you regain the clean cut on the underside of the work peace. Overall, the T track insert is a great idea as it saves the nice bench top from needing replacement. I am on my third bench, designed with an aluminium frame to fit on high-end saw horses. It all fits in the back of my estate. Un like MFT, it is bigger and very strong. The top is in four sections being joined using the UJK fence with dogs. This makes the top go together the same every time. It's all great kit. Bedankt.

@stephenpohlman326 Год назад

Someone else suggested a review of TSO tools. I second that suggestion

@richshulmistra1938 Год назад

Awesome video. I love your attention to detail and precision.

@thedogowl591 Год назад

The quality of the video and lighting in this is really fantastic here!!

@HookedonWood Год назад

Thank, I do a lot to improve myself on these points, and I am thankful you can see the difference. 😊

@LesJames57 Год назад

Nice presentation Denis

@MrPatdeeee Год назад

Kind Sir Dennis...I just bought a kit by UJK Parf Mark II Guide System. And I love it. Recuse Peter Parfitt had a hand in that awesome item. And, they are very accurate. Really. Thank you Sir for showing it to us.

@scotter_dotter Год назад

Beautiful mft table

@kentneil7100 Год назад

Another great video Dennis and I'm going to be buying your plans for the work bench.....

@HookedonWood Год назад

Thanks for your support🙏🏻. Have fun building!

@markarmstrong2592 Год назад

Thanks again Dennis for your knowledge and honest opinion

@frederickmichaud6783 Год назад

Awesome video Dennis! Great suggestions for a workspace in which you can’t fit a table saw.

@Benchdogtools Год назад

Great video Dennis.

@samrix5793 Год назад

Great video, although my wallet doesn't thank you

@MCsCreations Год назад

Yeah, I feel your pain... 😂

@roberthenry5657 Год назад

Great video Dennis! I use several of these items and they work as described. Thanks again for providing this video.

@Hog-g2z 5 дней назад

Good Day, They look 👀 like very products, ,

@Shiftie_ 7 месяцев назад

Hi Dennis, ik start een nieuwe hobby en heb als eerste projectje een MFT werkbank gemaakt. Heel veel inspiratie opgedaan via jouw videos! Vraagje: krijg je geen "tear-out" van je plaatmateriaal als je zaagt boven zo'n t-profiel? Dank en keep it up!

@johnr8106 Год назад

This was the video i needed :) thanks

@_peaboy Месяц назад

0:00 Intro 0:26 Overview of Part I 1:00 UJK Parf Guide System 1:28 Benchdog Rail Square 2:38 Using dog holes to make square cuts 3:00 Quad Dogs tall Benchdogs 3:21 UJK fence 4:20 AD: Hooked On Wood Table Plans 5:01 Benchdog Fence System 5:54 UJK Anti-Slip or Benchdog lifter dogs 7:08 UJK Repeatable Stop 7:53 Benchdog Stop Blocks 8:52 UJK Quad Dogs Options 9:25 Incra Quad Base Plate and Incra Router Fence 10:41 How did get these tools? 11:07 Ruwi Suport Rails 11:14 Bessie Clamps 11:38 Benchdog Disclaimer

@neeru7298 Год назад

Hey Hookedonwood, me and my father are two big fans of yours. We are almost done realizing the routing table from the China Tools you suggested and it's turning out great. We would really like to know what finish you use on black mdf in order to obtain such a beautiful look on your work benches! Thank you for the videos

@HookedonWood Год назад

I use Rubio monocoat pure. If you want more resistance to glue, you can add some wax after Rubio.

@neeru7298 Год назад

@@HookedonWood Thank you so much , you responded so fast 🤯

@Pistolita221 Год назад

Hey Dennis, I really appreciate your reviews. I was wondering if you've had a chance to review the GoHelper Square Ruler, it seems like it has more features than a woodpecker equivalent, and their quick square is great, too if 731's review was accurate.

@johnvolker6781 Год назад

I love the video, and your channel is great. Do you have a build video for the height adjustable mobile bench?. I see you working on? I love the onboard storage for the dog hole accessories

@HookedonWood Год назад

It will come in the future!

@kristofdewerdt9524 Месяц назад

Hi Dennis, have you never found a good MFT hinge for a rail?

@LDBecker 6 месяцев назад

Recently found your channel - liked and subscribed - I have a Woodpecker's "Track clamp bench top" replacement top for my MFT. I like the added ability to use the clamps in the slots with more flexibility. LOTS of t-track slots in a grid pattern, in addition to the 20mm hole patterns. They recommend using one of the T-slots as a cut slot for track saw cutting, and I see that you also recommend that on your table. Does it add much to fill the t-slot with something to support the underside of the cut, or does it make a difference? If so, what would your recommend to fill the slot? Thanks - from Los Angeles!

@HookedonWood 6 месяцев назад

Theoretical it should not make a difference because of the direction of the blade. The splinters will come at the top, when they exist. But I think it will give a slightly cleaner cut that can make a difference with cross cuts. Another benefit can be for better dust control. Because of the gab at the underside, dust will fly under your workpiece through the rail as well. When you block this, it is force to go up into the dust extraction from your plunge saw. Hope that help! Dennis

@LDBecker 6 месяцев назад

@@HookedonWood Hadn't thought of the dust control aspect - that's important. I can just cut some MDF strips to fit in the slot I guess. Thanks for the response and for the informative channel!

@mattcope2275 6 месяцев назад

it says this vid is part 2. is there a part 1?

@tpolarich6039 Год назад

Hi forgot Axminster anchor dogs, great for jigs

@HookedonWood Год назад

Agree!

@Tensquaremetreworkshop 10 месяцев назад

The PARF system does NOT give 'CNC style accuracy'. An analysis of the process shows there are many cumulative sources of inaccuracy- and this is borne out in measured practice. A CNC template is cheaper, faster, more accurate and can be used many times. Workbench on wheels- you want the wheels on the inside- having them stick out is just an invitation to trip over them.

@robertboughton11 Год назад

Hello Dennis.

@denty32 Год назад

Dennis, can I ask how you are getting on with the Festool cordless track saw

@philliplindsay3829 Год назад

Hi Dennis, what is the vise that you have on your workbench please?

@superpatate1234 4 месяца назад

Where is the part 1 ?

@eladsinay6914 Год назад

I had a question. There’s always the debate between bench dogs and microjig. I’ve heard your thoughts about hang ups in cords and screws falling in the gaps. Have you considered building a top that has microjig on one end and bench dogs on the other side to make a hybrid in one table? I know some have done both in one bit I don’t think I’ve seen a split in one table. Could be interesting to save even more space.

@HookedonWood Год назад

I do not like an microjig top for the reasons you subscribe. I can do everything with the dog holes as well so I do not see the benefits of having a hybrid version that outweighs the disadvantage of the grooves.

@eladsinay6914 Год назад

thanks for the reply. Ill be building my table soon so ive been watching all your videos over an over again. love your design. only other person with a great concept is a guy on youtube by the name of pason woodworking. @@HookedonWood

@half_a_bubble_off Год назад

Just thinking you could make an MDF say 2' x 2' piece with Microjig cross pattern grooves that you can fasten to the workbench with bench dogs and then use this for more flexible clamping when needed.

@eladsinay6914 Год назад

@@half_a_bubble_offyah I suppose you’re right. I still have a ways to go before I get there so I love all the ideas for when it’s time. Currently doing insulation in ceiling , new table saw, French clear wall, new electrical… pretty much whole new shop lol. Then comes the workbench.

@timothywozniak6952 11 месяцев назад

What size is your larger work table?

@donderdedon Год назад

Hoi Dennis, waarmee werk je het zwarte MDF af kwa finish?

@HookedonWood Год назад

Ik gebruik Rubio Monocoat pure. De laatste tijd doe ik er ook een laagje wax op als de Rubio goed droog is. Dit laat lijmresten iets makkelijker verwijderen.

@hendrikswane2598 Год назад

@@HookedonWood Mag ik vragen of het aanbrengen van de Rubio Monocoat pure goed gaat in combinatie met de MFT gaten, dat de coating de gaten niet "verstopt", of breng je de coating aan voordat je de gaten boord ? Dank

@donderdedon Год назад

@@hendrikswane2598 ik smeer mijn MFT tafel (normale MDF in met Rustins Danish Oil om het te beschermen tegen lijm resten etc, op de kopse kanten (zijkanten en mft gaten) trekt het in als een spons. Daar is het net of het niet behandeld is.

@donderdedon Год назад

@@HookedonWood Ziet er netjes uit! Ik gebruik Rubio natural vaker om projecten van eiken af te werken. Maar nog nooit gebruikt op zwart MDF. Gebruik je dan een sanding dealer voor de kopse kanten? Je werkplaats ziet er echt super nice uit! Complimenten! 2 vraagjes. Waar koop jij je zwart MDF in? En gebruik je nog veel je CO2 laser van gweike? Ik ben aan het twijfelen er een aan te schaffen. Ik ben met name benieuwd naar hoe jij de rook afvoert.

@GeorgeLewisDavis-x1e 14 дней назад

VonRueden Union

@raimopuuvark 2 месяца назад

Spending tens of thousands on this gear for cutting mdf sheets😂

@jemo_hack Год назад

The bench dog rail square is not the best solution out there, by pushing outwards on the Alu with the the “convenient” clamping mechanism, this pushes the Alu, outward, the rails are design to have straight integrity with the outer edge *the rectification edge* that forms the extruded Alu “U” on the top, the clamps byte into the end of the rail, not only taking of square, but messing the end of the rail. Good luck with that!

@HookedonWood Год назад

Why should you damage the rail when clamping these rail squares? That is completely not necessary. I even think you will have a hard time trying it on purpose. The clamps touch the rail right on the edge at the underside of the "U," so it seems to me almost impossible.

@jemo_hack 11 месяцев назад

@@HookedonWood have a look at the NEW TSO GRS-16 PE v2 and see what I mean, gave them a buch of feedback on this feature. 😉Look at the contact with the outer edge of the track *opposite of the cutting edge, which is where the QA test the rails to conformity of the design (strait ness as the fronde of extrusion is around the outer end the the guide part of the extrusion). otherwise as I mentioned before, you are clapping into the rail, that is, there is a force exerted from the inner T-track inward from the edge of the rail (pushing in ) from the cam clamps and cams are just a force element, hence my comments. I don’t disagree that why are build nicely, they will however not perform on par with the TSO/Festool ones, and they are prone to damaging the rail, In my humbled opinion and experience with them. Cheers!

@tonyholzel996 Год назад

I might have to unsubscribe to your channel before I end up with more accessories than holes to stick them in 😂.

@HookedonWood Год назад

😂😂

@nealmorales525 10 месяцев назад

*Promo SM* 💕

@lacerta5979 Год назад

Dennis ik vind het best goede video's maar het begint steeds meer een elitair programma te worden niet méér voor de gewone man of ,hobbyist ik ben zelf jachtbouwer op van die grote plezierjachten en om speciale meubels te maken . Jammer je begon goed ik weet dat je programma groeit maar nou is het voor wie het kunnen betalen al die spullen.

@HookedonWood Год назад

Binnenkort weer een China tool video. Het is niet zo dat deze producten niet verkocht worden of zo. En het geeft mij weer meer ervaring om e.e.a. te vergelijken.

@sunnygorden27 8 месяцев назад

For the priceof these fancy tools, you should also buy a dunce hat for worlds biggest fool for 500 bucks haha

@David-ee9zg Год назад

Seems to me like I’m looking at some hermetically sealed, precision engineering laboratory that’s been set up for a RU-vid channel. Is it supposed to be about woodworking or tool collection? Which maybe ok for selling all sorts of tools and jigs which all look brand new and straight out of the box. Where’s the sawdust? Mess. This guy builds a workbench that looks like it would be more at home sitting in the jet propulsion lab at NASA. This is supposed to be about woodworking, right? Or have I missed the point here….?

@HookedonWood Год назад

my channel right now is about "making my dream workshop" and this is how I think about it. Since I now have an mature channel, I have the opportunity to test and show products. I give an independent opinion on these after I have worked with them. So based on actual experience. I imagine this could be of interest to people. I like a clean workshop, and after every project it looks like new again. That's what I like, clear mind, clear workshop and that makes me enjoy my woodworking to the maximum.

@David-ee9zg Год назад

I think you’re inventing a new kind of engineering woodwork which is great if you just want to buy loads of expensive or fancy tools and jigs. That’s your right to do and you’ve obviously got a lot of support from your subscribers but this isn’t woodworking or carpentry as I like to watch it. I suppose I see carpentry a bit more like art and less like a science. Nothing personal to you, you seem like you are really enjoying it.

@HookedonWood Год назад

I can understand what you say. For me it is a hobby that turned from woodworking to content creater. That I choose this type of content does not mean I do not do woodworking. It is just my focus point is the workshop and affordable tools from China. Because of that I invented some things every woodworker could benefit from. So, as a viewer, you van watch what you want and when there is some day more interest in dustextraction or ways to improve your workshop, my channel can give some inspiration. In the end, it is all about enjoying woodworking

@nick_t777 4 месяца назад

@@HookedonWood today when i think it amazes me at through what our fathers went through using simple hand tools which took time to master and time to make anything that perfect. today time is money and we are all time poor. As a hobbiest, these tools help be more efficient and accurate which keeps as motivated to continue. However, i do appreciate the more manual and keen eye our father's used in the 60's and 70's. I is an art. There are some youtubers that still show and demonstrate this skill. I think it takes a quite a bit of practice to get it right and then when you do, it will take much longer to make the finished product. Tradies today must be efficient to keep cost down, and be able to repeatedly produce the same product. I'm actual refitting a workshop area myself and looking to people like you to learn from people like you. Thanks.

@stephengreco5115 10 месяцев назад

Well thought out. This bench is art - seriously. I wish black mdf was more common in the us.

@WoodworkJourney Год назад

That Bench Dogs fence with the cutout looks super interesting, particularly for my system. Thanks for another great presentation!

@johnclements6614 Год назад

They also do a short fence for use on the waste side of the track.

@mixeduptv2268 Год назад

I've used the long Wnew dowel jig for dog holes. Drilled 8mm holes for references 96mm apart with jig along left side of MFT. From there took a piece of plywood & drilled 5 x 8mm holes similarly in 2 rows (to check accuracy), attached router centered on hole in middle right row, stuck 8mm pins in left row, always have 3 pins minimum then for ref, & used 20mm to cut in dog holes along 2nd row. Then replaced pins with threaded dogs & cut the rest at 20mm. Checked as I went & all lined up near enough perfect to not have any issues. 2nd time round I picked up a Bosch FN RA 32 1200 second hand for €40 & got the Bosch pin fitting & slide for €40 new, used an alu plate & some plywood to attach to Makita router & saved a load of time. To make accurate dog holes doesn't require these more expensive jigs - if you have a bit of creativity & time to spare.

@stefanr9653 7 месяцев назад

@ Hooked On Wood What camera are you using to film, and which lens?

@tpolarich6039 Год назад

Hi. You should review TSO and Sauter Shop stuff in part 3 if you do another accessory video.

@HookedonWood Год назад

Great Idea, I will keep it in mind.

@keving8682 Год назад

I have the Incra fence plate and love it! However, the rail square seems to be off by about 1mm from top to bottom on my cuts no matter what I try when I used it alone on cuts 300 to 450 mm or so. Perhaps I am expecting too much precision? All of the other Bench Dogs products I have I like. Same with UJK. Both make great tools and ship to Canada which is awesome!

@66meikou Год назад

I love your stuff. It's so precision orientated. Id I buy your work benh plan does it over both the saw area and the the use of a router table? I have quite a small basement so the best I could get would be a portable table saw to use. I think a track saw is a far better option apart from ploughing. in which case I'd use a router.

@bradleytuckwell4881 Год назад

There’s so many amazing tools and jigs on the market but if it’s possible to make I’ll give it a go I love the challenge and the joy it brings if it works out and of course it’s cheaper on the pocket

@24revealer 10 месяцев назад

5:00 Hey Dennis, let us know when China makes this fence!

@johnnyflores7375 Год назад

I have been looking but I can't find the video where you made the workbench in your thumbnail, can you link it?

@HookedonWood Год назад

Will be there in the future

@hendrikswane2598 Год назад

Goedendag Dennis. Veel goede informatie! Ik heb een vraag over de "Veiko Rail Guide Clamps". Ze passen in de mft table-gaten, maar dat is natuurlijk ook nog afhankelijk van de dikte van je blad. Passen ze in jouw blad en welke dikte gebruik jij? (het blad wat ik gebruik is 19mm). Groet, Hendrik

@HookedonWood Год назад

19 mm is goed. Anders zou je nog een kleine afkanting kunnen maken aan de onderzijde. Maar 19 mm zou normaal gesproken gewoon moeten werken

@CreativeCarpentry Год назад

I’ve been watching you for years and it’s great to see your success growing, your videos are Informing and entertaining to watch, thanks for the content

@HookedonWood Год назад

Thanks David. Great you following so long. Very much appreciated :-)

@Wolfgang-xi5xf Год назад

could u please show your workbench in detail?

@HookedonWood Год назад

One day I will. But I have to make a new one because this one is not perfectly flat. So I have to make one with a torsion box and some other features I mess with this one. From that one, I will make a video.

@RaymondvanOverdijk Год назад

Ben je ook van plan of een video te maken over je tafel welke je nu vooral gebruikt hebt in deze video?

@HookedonWood Год назад

Dat ga ik wel een keer doen, maar ik moet een nieuwe maken omdat deze niet volledig vlak is. Ik ga er een maken met een torsie box en verder nog wat aanpassingen van zaken die ik nu mis. Van die uitvoering ga ik een video maken.