Тёмный

Ridetech Air ride installation and LS Mounts are ON!!! (1955 Belair Frame is Coming Together) 

TWA Motorsports
Подписаться 71 тыс.
Просмотров 14 тыс.
50% 1

Ridetech Air ride installation and LS Mounts are ON!!! (1955 Belair Frame is Coming Together)
Huge Thanks to 417motorsports.net/
Parts I am installing...
Motor Mounts/Transmission Mount
www.brphotrods.com/c/CNV15/19...
Ridetech www.ridetech.com/product-cate...
Entire Ridetech Suspension Kit amzn.to/3WxIPat
Air Control amzn.to/3fJOxp7
New Steering Gear amzn.to/3NHKtlR
Front Wheels ebay.us/51FCie
Rear Wheels ebay.us/olC9Iu
Rear End and Components www.quickperformance.com/
Tools Used
Dewalt Grinder(Corded) amzn.to/3XyMLI0
Dewalt Grinder(Battery Powered) amzn.to/3Hf2Qgx
Flap Wheel amzn.to/3ktegnV
Cutting Disc amzn.to/3ZJvmy3
Air Hammer amzn.to/3QQVrab
Cherry Picker(Engine Hoist) amzn.to/3ZJsAsD
Jack amzn.to/3ChXaiW
Jack Stands amzn.to/3Z4GKE9
Dewalt Impact amzn.to/3IhbThP
LS Engine Lift Plate amzn.to/3WG6wNF
Gloves amzn.to/3IyofQW
LED Work Light amzn.to/3Q8bsHj
Tonight we have a lot accomplished on the 1955 Chevy Belair. In order to install the ridetech kit and get the 55 belair slammed to the ground we needed to cut off some of the stock parts on the frame. I also wanted to remove the old leave spring mounts and transmission mounts to make way for the ls swap I am doing. I will be running a 4l80e transmission and 6.0L Ls engine. I took the frame to 417 motorsports to have the brackets welded to the rear end and frame. I also had them close up some of the frame to make it look a little nicer. This trifive is going to look and sound amazing when we are finished. I am excited to keep adding parts as we go. If you are looking to put air ride on your trifive or 1955 Chevrolet Belair you need to watch this video. The parts are not a perfect fit but definitely make this easy to do in a home shop or garage. Hit the Comments and let me know what you think.......
Thanks For Watching!!!!
Want to Send Stuff
TWA Motorsports
PO Box 190
Aurora MO 65605
Subscribe and Follow TWA Motorsports
RU-vid: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 9 amzn.to/2Of60Z0
GoPro Mount amzn.to/3pf1HvX
Gopro Session amzn.to/2IZprAp
Video editing amzn.to/2NawHtz
Photo editing amzn.to/2NawHtz
As Always Thanks For Watching!!!!!!
Do this at your own risk. For entertainment purposes only
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

Авто/Мото

Опубликовано:

 

18 янв 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 67   
@d.p.9005
@d.p.9005 8 месяцев назад
Looking good my friend real nice l wish you well ,thank you for sharing my brother .
@TWAMotorsports
@TWAMotorsports 8 месяцев назад
Thank you
@lolife999
@lolife999 Год назад
Don’t forget about running your air lines for the air ride. Buy some “made 4 you” “T-clamps” and drill and tap the frame for all your fasteners that hold all your brake lines and fuel lines also.
@TWAMotorsports
@TWAMotorsports Год назад
That is the plan on lines
@danorourke5184
@danorourke5184 Год назад
This is exciting to watch, looking forward to more videos! Thanks for sharing!
@TWAMotorsports
@TWAMotorsports Год назад
It is exciting to do too
@markb3129
@markb3129 Год назад
Good job on frame prep, 417 Motorsports welding looks great!! Looking forward to the next video on this major project. ✌🏻
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. Yes they do a great job
@GoldenStarClassicAutoParts
@GoldenStarClassicAutoParts Месяц назад
Looks like some great progress!
@TWAMotorsports
@TWAMotorsports Месяц назад
Thank you
@davidbrown-55
@davidbrown-55 Год назад
Love the progress. Your kind of the Guinea pig for my project. I’m probably going to run the same setup. I’m ready for the next vids. Thanks
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. Lots more to come
@mikestrasheim923
@mikestrasheim923 Год назад
Very nice, doing a great job.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you
@mikestrasheim923
@mikestrasheim923 Год назад
@@TWAMotorsports Are you familiar with Max Jax? It would work great in your new shop, lifting car bodies would be breeze.
@TWAMotorsports
@TWAMotorsports Год назад
I am. Gonna put a 2 post in eventually
@staleyexplores
@staleyexplores Год назад
this is one hell of a project bud, keep up the good work.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you
@rustyyoungblood6652
@rustyyoungblood6652 Год назад
Nice work.Harder than I though
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. Definitely more than normal work.
@kelvintarveer
@kelvintarveer Год назад
Also the oil pan change is needed for the steering to clear
@TWAMotorsports
@TWAMotorsports Год назад
I said we would be changing in the video
@hildablanco1591
@hildablanco1591 8 месяцев назад
Leaf Springs are for sway and carry capacity air ride on a heavy car is a no no bad idea and drum breaks are the best at rear and original differential is made in the USA with quality gears and timken bearings and race
@TWAMotorsports
@TWAMotorsports 8 месяцев назад
Good thing you don't have to drive this future turd
@melissadunagan6596
@melissadunagan6596 Год назад
Why not use the C5 corvette fuel filter and regular? Then you would only need to run 1 fuel line.
@tristannivens3269
@tristannivens3269 Год назад
I’ve heard they have a pretty high failure rate and if you use more than a 350lph fuel pump it will overwhelm it. That’s just what I’ve heard though, not experience.
@TWAMotorsports
@TWAMotorsports Год назад
It won't handle the pressure I will be throwing at it.
@TWAMotorsports
@TWAMotorsports Год назад
Bingo
@ronniemiller5771
@ronniemiller5771 Год назад
Use a 4 or 5ah batteries it does pretty good! My newest Dewalt is a 3/8 ratche i highly recommend it. Been great so fart
@TWAMotorsports
@TWAMotorsports Год назад
They do better. That's for sure.
@user-nd7wm6rq2e
@user-nd7wm6rq2e Год назад
I was trying to see if you noted the frame partial VIN, somewhere around the drivers seat frame mounts. Enjoying your work :>)-
@TWAMotorsports
@TWAMotorsports Год назад
I haven't
@phatridesgarage3760
@phatridesgarage3760 Год назад
Great Video, Im doing the same thing on a 57 right now, so it was great to see your video, just curious what width did you go with on your 9 inch diff, axle face to axle face
@TWAMotorsports
@TWAMotorsports Год назад
Its a stock replacement width
@kelvintarveer
@kelvintarveer Год назад
You’re going to have to cut the tunnel in order for the transmission to fit and also the oil pan will need to be changed
@TWAMotorsports
@TWAMotorsports Год назад
No on transmission. Yes on oil pan, which I stated
@kelvintarveer
@kelvintarveer Год назад
@@TWAMotorsports Love what you’re doing keeping going. Waiting for the end results.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you
@jeffgraham48
@jeffgraham48 Год назад
Came a long way from the disappointment of cracked frame.
@TWAMotorsports
@TWAMotorsports Год назад
That's for sure
@RumPumPumPum714
@RumPumPumPum714 Год назад
Holley makes some good oil pans. I have one on my Chevelle that’s nice and snug.
@TWAMotorsports
@TWAMotorsports Год назад
I may do one of them. Still measuring
@judyparker7820
@judyparker7820 Год назад
@@TWAMotorsports Go with the high clearance Moroso from BRP and use their headers.
@TWAMotorsports
@TWAMotorsports Год назад
I probably will
@bretjackson300
@bretjackson300 Год назад
Is the 4l80 going to fit in the transmission tunnel or are you going to have to modify that? Awesome project.
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. It fits without modification
@hildablanco1591
@hildablanco1591 8 месяцев назад
The frame says don't screw with old quality build your Owen frame and see if it fits the body
@TWAMotorsports
@TWAMotorsports 8 месяцев назад
Not sure what you are saying here
@jimdandy2275
@jimdandy2275 Год назад
Good progress Travis. Missing parts or hardware. Really? Vendors, quality control? Somebody's job to count the pieces.
@TWAMotorsports
@TWAMotorsports Год назад
It happens. They next day aired replacements
@guybenning6909
@guybenning6909 3 месяца назад
just bought a 57 chevy hardtop wanting to about same thing to mine but my cars in way worse shape so gonna b on more of a budget deal u mind sharing rear end with u put in with the air ride?
@TWAMotorsports
@TWAMotorsports 3 месяца назад
Its a quick time performance rear end and it wasn't cheap
@guybenning6909
@guybenning6909 3 месяца назад
I'm sure it wasn't I've never had one but heard great yhings about them you by chance know what width it is
@TWAMotorsports
@TWAMotorsports 3 месяца назад
@guybenning6909 stock width
@guybenning6909
@guybenning6909 3 месяца назад
OK. thank you!
@TWAMotorsports
@TWAMotorsports 3 месяца назад
@guybenning6909 you're welcome
@ozielmendoza930
@ozielmendoza930 Год назад
What happen with the white tahoe?
@TWAMotorsports
@TWAMotorsports Год назад
Sold a long time ago
@judyparker7820
@judyparker7820 Год назад
Your trans crossmember is upside down. Hopefully he didn't set pinion angle with it that way. Just finished my LS3 TR6060 with BRP mounts in my 57 Chevrolet.
@TWAMotorsports
@TWAMotorsports Год назад
After measuring pinion angle this was the the correct way to mount it.
@judyparker7820
@judyparker7820 Год назад
@@TWAMotorsports Curious what did you set it too?
@TWAMotorsports
@TWAMotorsports Год назад
3 degrees
@davidryder5082
@davidryder5082 Год назад
Ever miss the RS7 ?
@TWAMotorsports
@TWAMotorsports Год назад
Just the look
@expatconn7242
@expatconn7242 Год назад
Got shock wave on the front bags on the rear .. trick set up ..
@TWAMotorsports
@TWAMotorsports Год назад
Thank you. Technically they are both shock waves
Далее
4-Link Rear Suspension for Air Ride and Coilovers
9:29
1956 Chevy BelAir 350 / 4 speed Test Drive
2:16
Просмотров 28 тыс.
Our 57 Chevy Finally Runs And Drives 2000 Miles Home!
22:36
The BEST Way To Do A CHEAP LS Swap!
8:42
Просмотров 245 тыс.
I traded for a 1955 chevy
23:23
Просмотров 104 тыс.
1955 Chevrolet Bel Air Restoration Project
12:04
Просмотров 48 тыс.
Changing Wheel While Driving 😳
0:24
Просмотров 15 млн