RIDGID 18-Volt OCTANE 1/2" Drive High Torque 6-Mode Impact Wrench Review R86211B | 1,500 Ft. Lb.

Подписаться 214 тыс.

Просмотров 120 тыс.

50% 1

► Check Out The RIDGID R86211B 18 -Volt OCTANE 1/2" Drive High Torque 6-Mode Impact Wrench at The Home Depot: thd.co/3dgC19V
► Sunex 1/2" Drive Impact Socket Set, 43-Piece, Metric, 9mm - 30mm - amzn.to/3bbgayZ
► Sunex 1/2" Drive Impact Socket Set, 43-Piece, SAE, 3/8 Inch - 1-1/2 Inch - amzn.to/3dmzSt4
RIDGID finally has an 18-Volt OCTANE Brushless 1/2 in. High Torque 6-Mode Impact Wrench. If you were in the RIDGID line, this is a tool you have been waiting a long time for! RIDGID's High Torque Impact Wrench has 6-modes. Three are the standard power modes you see on most impact wrenches and three are auto tightening modes. Auto tightening modes allow you to set high, medium, and low settings for starting to fasten items.
The RIDGID High Torque Impact Wrench pretty much matches the specs on the MILWAUKEE FUEL M18 High Torque Impact Wrench. We mess a bit with both in the video. RIDGID claims a maximum torque output of 1,500 ft./lbs. of breakaway torque and 1,100 ft./lbs. of fastening. Remember, both numbers are stated as an up to figure.
This RIDGID High Torque Impact Wrench is compatible with all RIDGID 18-Volt Batteries, BUT it works the best with 6 Ah Octane batteries and higher.
Of course, this tool is eligible for the Lifetime Service Agreement IF you register within 90 days of purchase.

Хобби

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 310

@narlycharley 3 года назад

Their lifetime service agreement is a no brainer for me. I’ve heard great stories of people exchanging tools and batteries with Home Depot, no questions asked.

@dukex12 3 года назад

If they give it to you I'm sure it's nice. I wouldn't know seeing as they have yet to give it to me on 3 eligible purchases with receipts.

@jkbethune 3 года назад

@@dukex12 Have you enquired about why they didn't give it to you? I've never had an issue getting my purchases covered. They certainly aren't quick about it, but I've always gotten it.

@dukex12 3 года назад

@@jkbethune I did not. I had applied on time and sent copies of the receipts. I figured it would be a done deal since TTI owns direct tool and is pretty tight with the depot. When they turned it down on my purchases life was kinda hectic. I did a quick search online and saw that it wasn't uncommon to have to fight them and some others had even lodged BBB complaints. Figured it wasn't worth the hassle. I had gotten the tools for a good price and they performed well considering. Plus the LSA isn't what it used to be anyways.

@jkbethune 3 года назад

@@dukex12 Fair enough. I was just curious about what their reply would have e been if you did question it. Hopefully life has gotten better for you than it was at that time.

@Keyno77 3 года назад

@@dukex12 thats because you have to register your tools as soon as you get them read their warranty on the manual, box, website

@jjppsanchez77 4 года назад

It's about time! Im getting it. I have both the 3/8 sub compact and the 1/2" mid torque

@crbake 4 года назад

Thx Brian was hoping you would review one.

@tite-musleemislam4193 10 месяцев назад

Upgraded from an older 18v kit. ru-vid.comUgkxW1vOBRCMrgTCDEijzpVzDWsgI-Jm2iQv I independently chose the drill and impact tool, before I came across the kit.I like the 3 speed impact gun. It seems more powerful than my older one, and it can be set to be really gentle. The drill is more appropriately sized for my use. I used to have a hammer drill, but I did not like that it was so big and it was not a great hammer drill. I rather have a smaller drill like this, and then get a corded hammer drill for the odd case I need that.

@seannicholls2998 4 года назад

A like for the only video comparing these two. A sub for a great early review. Looking forward to long term testing and feedback from use. I purchased a couple of Rigid power tools a few years ago to replace my still awesome, but outdated, Makita tools. At the time I was underwhelmed with the build quality and performance and have faught off the urge to cut my losses and go to the Fuel lineup. I may give Rigid another chance after this and other current reviews you are offering. Keep it up!

@brokeduece1691 4 года назад

My wallet is starting to hate ridgid. I just bought the entire Ridgid line up, plus 2 18v vacuum.. Now i must have that torque wrench for no reason.

@LUISTHEBOOTYCLAPPER 4 года назад

Same bro same

@jackbrown5037 4 года назад

Y do I get excited about new tools my bank account hates me lol

@Mr.DontKnow 3 года назад

Hahaha! I feel you

@funnymomentsnow1425 2 года назад

Yup... That's how it starts... Lord only knows where it ends lol

@ToolswithSoAlz 4 года назад

I am absolutely loving what Ridgid has been up to lately. This is an extension of this and is a tool I will be picking up. The price and power look right to me.

@jayfrancis7731 3 года назад

Their new line up is a big bummer

@ToolswithSoAlz 3 года назад

@@jayfrancis7731 you might be right but I am going to reserve judgment until I have them in my hands and see for myself.

@jayfrancis7731 3 года назад

@@ToolswithSoAlz i just liked the direction they we’re going with the octane line and they’ve just completely dropped it. Also no more 12v. That was a bummer too. Gonna by the m12 stuff

@ToolswithSoAlz 3 года назад

@@jayfrancis7731 I wouldn't give up on the 12v line just yet. One of the channels has said he talked to Ridgid and they said they might have more tools available in the line soon. Time will tell I guess.

@dimassalazar906 4 года назад

Thanks! This helped make up my mind about buying it.

@WorkshopAddict 4 года назад

Glad we could help!

@AntonioClaudioMichael 4 года назад

Great video Brian

@mrbreezeet1 2 года назад

I agree on the auto tightening mode. I have a pretty good feel for the impact.

@ulisesmoreno7385 4 года назад

I got mine on the way cant wait to use it

@phxgen 3 года назад

Just got mine a couple weeks ago. Isn't it bigger than you expected?! Thing's freaking huge. Kicks ass though.

@dutchynehtam 4 года назад

I’m getting this man. Been waiting on it for awhile

@WorkshopAddict 4 года назад

This tool should have been out years ago. I bet these fly off the shelves. This is the equivalent of TP right now.

@dutchynehtam 4 года назад

WorkshopAddict I’ve been looking to get into a new tool line. Been eyeing the Ridgid Bluetooth charging radio for awhile now. Have a good reason to get into orange power

@brandonjohnson7559 4 года назад

Did they send you this or is there somewhere I can buy it?

@dtester 4 года назад

@@brandonjohnson7559 Check Home Depot. Home Depot is the official Ridgid power tool store and Ridgid will only allow LSA registering with receipts from official stores.

@AutobahnDan 4 года назад

Just got mine in today! It’s gonna replace my Dewalt 899!

@injunboy89 4 года назад

Great high torque, I have the midrange and love it but for power I already claimed the I.R 7152 and its beast

@mrbreezeet1 2 года назад

Is this the one you have? www.homedepot.com/p/RIDGID-18V-OCTANE-Brushless-Cordless-1-2-in-Impact-Wrench-Kit-with-1-4-0-Ah-Battery-and-Charger-R86011KSB2N/316087389

@ashlynnbrooke1823 4 года назад

Well I kinda wanted to buy the Ridgid but now I for sure cant wait to buy it!

@zew1414 2 года назад

Thanks for the review, what you were actually using it on was one of my major concerns cause I run into a lot of 32mm axel nuts. (Using it for cars and light trucks, no machines or diesel work). Mostly.luh nuts, suspension bolts and that type of stuff. So the Rigid deal, 2 tools for $179 maybe a good way to go. I can grab a cutter or something that I can take out the shop with me for side work where my air tools are not a useable.option. thanks so much bro!

@mesa620 4 года назад

Man, I’ve been waiting for Ridgid to make a high torque impact for several years. Got tired of waiting and bought the Milwaukee last December. Figures.....

@stottgrant 4 года назад

mesa620 same rip

@wilbertog58 4 года назад

Greetings from Puerto Rico, I have enjoyed seeing this video, and I want to add that there is no equal to the Ridgid power tools which the lifetime warranty. Ridgid as far as I know it is the only company that offers lifetime warranty on their electric or battery tools, for me that is a great feeling to know that my money is very well invested.

@r.a.p.k.models4160 4 года назад

Creo q somos los únicos boricuas viendo estos reviews de power tools 🏁

@tito15215 3 года назад

@@r.a.p.k.models4160 no son...jaja

@TheJosephayal 3 года назад

I'm from PR too

@unrealsportscardz2225 3 года назад

Latinos lol , Lla llegamos

@jonathanrequena4361 2 года назад

Nice I like it big fan of ridgid ima get one for Black Friday if they go down if not I’m still gonna get one

@bomason7074 4 года назад

My Brother, your hair is absolutely FANTASTIC! NO HOMO 🇺🇸💪

@claddagh1000 2 года назад

Love my Ridgid

@rolandomota1192 4 года назад

I got a deal on a tool set 18v. I have to get it now . I am already invested in that batterie type.

@MrMikebeben 4 года назад

So the one thing about auto feature is using the app and setting your torque limits. I have the Milwaukee high torque one key and absolutely love the auto features because I have the torque set for 110 for putting on car lug nuts. So if ridgid has three auto modes that’s a huge bonus

@WorkshopAddict 4 года назад

They do not.

@jimyounger9490 4 года назад

I’d buy it. I like both brands. When rigid first introduced 18 volt , they offered lifetime warranty. Wish I bought it back then.

@cheynebest7028 4 года назад

Are they not offering lifetime anymore?

@ToolswithSoAlz 4 года назад

Ridgid still has the LSA.

@jimyounger9490 4 года назад

Cheyne Best not sure. I hear the batteries are being offered that way now. But back then I was really close to buying some rigid 18volt. My grandpa had rigid plumbing tools I remember as a kid. I’m 54 now. Lol.

@jkbethune 3 года назад

@@cheynebest7028 If you purchase a tool, or a battery and charger kit they offer the LSA, but if you buy just the battery or batteries on their own they you only get the 3 year warranty.

@cardo1111 4 года назад

Interesting that Rigid keeps inching closer to Milwaukee in terms of product line and performance. Reminds me of the old days at GM, almost becoming like comparing a Camaro to a Firebird.

@rolandomota1192 4 года назад

I did not live that but I do understand the comparison.

@mongomongo17 3 года назад

i saw a video and the guy said there made by the same factory

@SooSmokie 3 года назад

Thats because milwaukee owns ridgid. Trickle down.

@coriekeck6934 3 года назад

Emerson ownes Ridgid but Ridgid is made in TTI s factory right beside Milwaukee and Ryobi

@zew1414 2 года назад

I was looking at the Rigid today and it was at $179 and they are giving you a second tool. So 2 tools for $179, you cannot beat that. Was looking at maybe grabbing a compact impact driver or a grinder/cutter for exhaust pipes. I'm a mechanic so I have no use for saws and the like.

@davidpinnix7446 4 года назад

New sub .like your channel!have used ridged impact for 3 years. No problem, except the rubber grip.it will not hold up to diesel fuel or other fluids .the rubber swells falls off the plastic. Interested in what your subs have to say. Appreciate your work.

@xXGOTCRABSXx537 3 года назад

Love my mid torque. Will definitely be getting the compact and high torque.

@RicardoSanchez-nb3nm 3 года назад

Why do you need all of them? Just wondering

@xXGOTCRABSXx537 3 года назад

@@RicardoSanchez-nb3nm that’s a good point, I honestly don’t! I just have a bad habit of buying tools I don’t need haha.

@powertools2375 3 года назад

@@xXGOTCRABSXx537 I’m in the same boat with my DEWAlt tools... it’s a curse

@shimon2476 3 года назад

My mid torque just gave out I'm studying if to buy another brand don't think it lasted long at all.

@powertools2375 3 года назад

@@shimon2476 I got the dcf894 mid torque DEWAlt not the fastest or strongest but is holding up well. And ergonomics are great. My 2 cents.

@lawrenceburt1974 3 года назад

That auto fastener function should work well on left handed threads.

@DanielGomez-cf6vk 4 года назад

I order the 3/8 sub compact and the 1/2 inch high torque hasn’t arrived yet I love their mid torque and now just waiting for the 1/2 inch sub compact impact wrench later this year!

@Fee.1 4 года назад

Out of curiosity can I ask why you wouldn’t just get the Milwaukee?

@jayjayhooksch1 4 года назад

@@Fee.1 sounds like he's already heavily invested in ridgid's 18v line. My guess is he doesn't need the 1/2 sub compact bad enough to invest in another line, batteries and chargers are so costly just to jump into a line for one or two tools.

@Spad68 4 года назад

AAA HELL Now i have to go buy another tool to add to me kit . Lolololol Nice video, thanks

@dalebabbitt6185 4 года назад

What a timely review of the 1/2" impacts. Until now I was only considering the Milwaukee Fuel and the Milwaukee One-Key Fuel. What's your opinion on the One-Key Fuel vs. regular Fuel?? Now I'm going to also think about the Rigid. Either way I'll be pulling the trigger in the next few days. Thanks for the review!!

@WorkshopAddict 4 года назад

FUEL vs FUEL O-K is basically comparing the same tool. O-K just lets you change settings in the tool. both have the same power.

@GrimReaper-ly8zk 4 года назад

Got the 3/4 one key. Set up my torque settings . Took a bit of time to do, going back and comparing with the torque wrench. So easy now. You can have an unlimited library of settings in your phone , hook up Bluetooth and load the settings for the job your doing.

@Alexander_l322 4 года назад

Grim Reaper that sounds like a hassle to me.

@diegocervantes7946 4 года назад

really interested to see a head to head battle on the m12 stubby and ridgid subcompact wrenches

@brianklein6387 4 года назад

I have the Milwaukee 2767 & irw7152 & I've seen several times where the irw7152 has a lot more noticeable power than Milwaukee 2767 I use Milwaukee all day until it cant do it then I use the irw7152 & it gets job done 99% of the time when it wont do job I just use torch to heat or just cut it off

@Tools-awesomeness 4 года назад

Kobalt as well unleashed their NEW 24v 1/2” high torque impact wrench, With 1,200ft-lbs breakaway torque and 750ft-lbs of tightening it looked nice

@scoutsniper762 4 года назад

TTI owns milwaukee, rigid and ryobi so its no surprise that there are a lot of similar features between the brands.

@WorkshopAddict 4 года назад

The surprise is that they let Ridgid, the mid-grade brand match or beat Milwaukee.

@TBD3.0 Год назад

@@WorkshopAddict Well they pulled it from the shelf. (sad)

@jasperlopez1960 4 года назад

Matco sells a half inch drive 33mm socket, no adapter needed

@muchogracious1557 4 года назад

Auto in reverse is good for left hand threads.

@walleyehunter8862 3 года назад

I have a Rigid impact wrench and grinder flashlight I love them but I bought a big 9ah battery which is way bigger than I needed

@johnnymartinez305 4 года назад

Ridgid is stepping their game up. their assembly is expanding.

@Frankiarmz 4 года назад

Any heads up on a Ridgid chainsaw?

@shangtsung7201 4 года назад

Expecting Joe Exotic and Joe Dirt to come round the corner any sec!!!!

@dawsonmuth 4 года назад

I’m waiting on ryobi to release a high torque 1/2” impact. They are the only tool line without high torque impact. Makita Milwaukee and ryobi all have electric ratchets as well. If ryobi gets a high torque impact I won’t have to switch tool lines.

@fearsomesquid7553 2 года назад

Ryobi, ridgid, and Milwaukee are all created in the same facility and owned by the same company. but i feel you on not wanting to swtich, ive got ridgids after swapping from ryobi and i miss some quirks about the ryos the ridgids dont have, still love my ridgids though

@wrenchtheroo6557 4 года назад

I can’t wait to see what milwaukee will do next, matco are at 1600 for their cordless 1/2, now ridgid is at 1500. I guess its going to be around 1600 ft lb

@Tools-awesomeness 4 года назад

Gabriel Vanasse Next: car companies will start making cars with some 30,000ft- lbs torque of wheel nuts tension

@pauljoey7977 2 года назад

I like my mid torque ridgid. Great all around impact. AND I DID NOT TAKE OFF MY DEM NEIGHBOR'S WHEELS. THAT WAS THE DUDE IN THE VIDEO. GO DEB

@backamdavid7318 4 года назад

thanks.

@AntonioClaudioMichael 4 года назад

Very cool testing ridgid seems like a very nice high torque but nobody's specs are ever correct on what the tool can install and breakaway torque are never correct compared to company specs they got that max spec on a specific test and then said that's what we are putting on the tool specs depends on bolt size and nut size and socket size and if your using an extension or no exstention is going to depend on the max breakaway torque and the max fastening torque.... they Probably used a very small socket and bolt to get that 1100 foot pounds fastening and 1500 pounds breakaway... was also nice to see it was very close to the Milwaukee since the Milwaukee couldn't go any further then what the rigid stopped at was neet information...

@mrbreezeet1 2 года назад

Someone that test them on some type of impact Dyno, Said the Ridgid, mid torque and the Milwaukee first series mid torque we're very similar in torque ratings.

@tonyreyes3294 4 года назад

Ridgid 💯

@pchevelle9653 Год назад

I have had nothing but problems with mine, I can't get it to even get a lug nut loose. Can't understand why..

@marclemoullec7997 2 года назад

How is the trigger feel and response. I find the 2nd gen Milwaukee has lag compared to the first gen.

@Gadsdan 4 года назад

With that hair you look like a guy I used to work with... then saw on an episode of COPS... but only was a witness so I'm pretty sure that's a compliment.

@mikeriverajr4447 4 года назад

do you know if it will take off crankshaft pulley bolts?

@nitrous07me 4 года назад

I’ve been waiting forever for this, if it can take off a 24 mm crank pulley bolt on a L83 5.3 v8 gm engine I’ll be satisfied 😍😂😅

@creeplife2802 3 года назад

So what happened?

@junod.j 2 года назад

Did it work?

@keithlavallee3460 4 года назад

Rigid no longer has that impact on their website plus all my Home Depots show they're out of stock?

@ahmedjaafar689 2 года назад

Hey guys you know outside the US Ridgid is called AEG. Did you know that ?

@LegendMuscle 4 года назад

Is this like brand brand new? I wanted to get their octane impact believe it was oy 500lb ft. But this one not only working on mowers and tools will work on vehicles aswell.. for the price I can replace the air compressor!! And take it anywhere in a bag.. definitely worth it

@LegendMuscle 4 года назад

Also being 1/2" with this much torque is 3/4 1" territory. So super impressed!!!

@lilmixdboy 2 года назад

Not the max output battery type?

@madeinusa1576 4 года назад

Ok the hair I gotta ask was it always there or was it just a low key hidden mullet I never noticed?

@WorkshopAddict 4 года назад

I went over it a few videos back. ;) My wife chopped my hair trying to cut it, so I wore this as a joke. It has sort of caught on and hides what little hair my wife left me with after a few whoops issues. I thought it was funny.

@madeinusa1576 4 года назад

WorkshopAddict lmao 😂 love it I swear did some investigating into some older videos I’m like did I miss this! Keep me coming man love the content

@Fee.1 4 года назад

Jake Krauss I spent the first 3 minutes laughing at the durag

@madeinusa1576 4 года назад

Fee it really had me though! Too funny

@pingpong9656 2 месяца назад

New to impact wrenches - do the modes affect RPM, Torque and/or IPM? Confused why they only talk about RPM.

@wildhog3217 Год назад

Auto torque are just hand tightened. You still have to torque it to spec.

@justinbustin677 2 года назад

Have mine for 4 month 1/2 impact and used it for about 10 seconds. Came back a hour later to use it and it started smoking from pulling the trigger once. Very disappointing

@rolandomota1192 4 года назад

You know once your invested Into a power pack. Your kind of stuck with that brand. At least for the tools life till you upgrade.

@Dale37 4 года назад

A lot of hate on the hair going on. I have long hair and could care less if someone else had long hair too or is bald. Nice review, I own the Milwaukee and have zero complaints. Ridged tools look nice but I have not used any before.

@mrbreezeet1 2 года назад

Hell, I'm 65, and had long hair on and off most of my life. It just was easier to keep it short.

@Dale37 2 года назад

@@mrbreezeet1 I have since chopped my hair off too. It just became more work then I liked.😅

@mrbreezeet1 2 года назад

@@Dale37 Yes, I was working on the car and the wind was blowing it all around and I didn't have anything to pull it back with I went in the house and hacked it off with scissors......lol

@bigmike4720 3 года назад

How much does it cost

@nsxproperties560 3 года назад

The new 2nd Gen Mid torque is probably the same side size as the Ridgid sub compact.

@WorkshopAddict 3 года назад

Milwaukee is smaller.

@funnymomentsnow1425 2 года назад

Amazing how they packed in all that power in such a small package

@bradishler5967 4 года назад

Out of stock online and in stores it says right now :(

@lavon1561 3 года назад

What would you recommend for working on my truck? Transmission swap / lug nuts etc. Can I risk snapping bolts when busting them loose if there's too much reverse power?

@cruzdeleon1888 3 года назад

Yes. For smaller lugs and nuts the Medium and Compact are a safer option. I wouldn't risk it

@funnymomentsnow1425 2 года назад

Absolutely!

@user-el6wb4ds8z 4 месяца назад

❤❤❤

@juddadam2 4 года назад

Not available in Canada

@Ashadewash 2 года назад

Techtronic Industries Co Ltd (TTI) As it turns out, and a host of other power tool companies. It also licenses the RIDGID* and RYOBI names for cordless power tools (Emerson owns RIDGID). TTI stands for Techtronic Industries Company Limited (TTI Group).

@1O1Matthew232 3 года назад

I love Rigid tools , have seven of them, but hate the new auto mode. It slows me down. I know when to let off the trigger the stupid things shuts off then has to be reset. Its a bad idea.

@3613jeremy 3 года назад

199 tool only home depot or 259 w 4AH battery & charger added

@dethpig420 3 года назад

This or the new Ryobi 1/2 One+ HP? I have the batteries for that and it would all be for working on my cars.

@WorkshopAddict 3 года назад

So... This Ridgid is a high torque and is more powerful and much heavier. The Ryobi is basically a mid-torque and is smaller and half the power. It depends on your plans for the use. If it is just basic car stuff, the new Ryobi will handle it. If you get into lifting a truck that is rusty, you would find the larger Ridgid to be the way to go. You would only need the Ridgid for a few nuts and bolts, but it would be nice to have it for them. Long and short, I use a mid-Torque 90 to 95% of the time on cars and only pull out the larger High Torque when needed. I am going to assume that the Ryobi would work well for you, but I want you to know the full story before I tell you what to buy.

@bobbuilder5362 3 года назад

I'm after a tool that will be sufficient for removing a tough crank bolt, factory torque is is 300 ft lbs or 400nm. It is a 27 mm bolt. Just want to get an idea of what this tool can do.

@WorkshopAddict 3 года назад

Mid-Torque will do it with a 5 amp hour battery or larger.

@bobbuilder5362 3 года назад

@@WorkshopAddict Thanks for the tip. Looks like the mid torque will suffice for all my automotive work.

@mrbreezeet1 2 года назад

@@WorkshopAddict Is that mid torque pretty decent? It's $159.00 at Home Depot right now. (Tool, 4 Ah battery, and charger) I have the DeWalt but want to send the Ridgid octane mid torque to my brother out of state.

@billlee1724 4 года назад

It’ll stop when the bolt if half way out if you hit a ruff spot

@WorkshopAddict 4 года назад

I messed with it a bit more while this video is uploading and mine is really hit or miss on if it works. Again, sample size of one. Who knows.

@crbake 3 года назад

Whats up Brian wondering how the impact wrench is doing.

@WorkshopAddict 3 года назад

Still doing well.

@cutefluffykittenlove 4 года назад

GEEEZ who cares about the hair smh but great video and review and I love that Rigid came out with this and I am gonna have to open up the wallet and get this thanks for the review

@ScottCarlson1965 3 года назад

How do you get a mm bolt on a old farmall tractor ????? Thats made in the 60s and 70s

@WorkshopAddict 3 года назад

Because of its age and use, that original bolt stripped out. I had a metric sitting around, so I tapped it.

@darianalonso991 5 месяцев назад

That left hand on the torque wrench must be for balance

@nomercyinc6783 4 года назад

there are easily found 36 mm 1/2 drive impact sockets even at orielys

@WorkshopAddict 4 года назад

You will never find that size in a kit. You have to buy them one by one.

@stevenstarner4290 3 года назад

@@WorkshopAddict Tekton has a 1/2 in impact socket set from 10mm to 36mm. No skipped sizes. $250. Both shallow and deep sockets. It’s 57 total pieces in the set

@Fee.1 4 года назад

I saw on some older reviews the Milwaukee pin detent models were a little less powerful than the hog ring models due to the strength of the anvil. Is that true today

@WorkshopAddict 4 года назад

The difference in torque is not as distant today as there are better materials used in the pin detent anvils.

@Fee.1 4 года назад

WorkshopAddict many thanks

@kartboarder22g17 4 года назад

Wow didn't see this coming. States it puts out 1500 ft lbs which is 100 more than the Milwaukee. Yet I wonder if the 1400 is with an XC battery and now that Milwaukee has HO batteries the Milwaukee puts out the 1500? Anyway very nice offerings for someone with Ridgid battery packs. I decided to go with Milwaukee as I got a charger a 5xc battery and the tool for $254 before tax

@russellleahy 4 года назад

No it doesnt

@kartboarder22g17 4 года назад

@@russellleahy no what doesnt?

@russellleahy 4 года назад

@@kartboarder22g17 it doesnt put out that power factory is way off on torque specs

@kartboarder22g17 4 года назад

@@russellleahy does anyone know about what it does put out cause %30 short of 1500ft lbs is nuts.

@JasonNortwich 4 года назад

When are these supposed to be at home depot for purchase?

@WorkshopAddict 4 года назад

They were available last week and now they are gone? I do not know.

@ghostrider-gm2wg 3 года назад

The ridgid sounds like its going to break apart when torquing down the bolt.

@Eye_Of_Rinnegan 3 года назад

Who cares😂 its got a life time warranty

@donniestoolthoughts9209 4 года назад

I agree. The speed/ mode selector is useless. Give me all the power when I squeeze WOT!

@josephdominics5935 4 года назад

Speed control does come in handy when you're using a swive or Universal to get into a tight space with a small nut and thread configuration .. it minimizes damage when shyt breaks loose on a finished product.

@juniortulio1989 3 года назад

still the ingersoll is the best its easy to use and very powerful

@javifalcon8106 3 года назад

Does it only use the octane battery, does it work with regular battery

@WorkshopAddict 3 года назад

Works with a regular battery, but will not give you the same power.

@kimbertduplessis 4 года назад

If you do a comparison video between them it would be great to see how they woudl do removing semi truck tires. If they all have 1/2" adapters it should be a fair test.

@WorkshopAddict 4 года назад

Yes, that is something I have been thinking of doing.

@nomercyinc6783 4 года назад

they make 30+mm size 1/2 drive sockets everywhere

@WorkshopAddict 4 года назад

Right dude, you have said it all over the place. I get it. It comes down to the right tool for the right job. If all you have is a 1/2" drive, great, go buy them one by one. I have been doing this longer than a few years so I have 3/4" and 1" stuff to work my way up. That just makes more sense to me rather than having a socket and a tool that might work.

@BenJamin-ou7kd 4 года назад

Dewalt needs an upgrade now!

@powertools2375 3 года назад

Yes, other brands are coming out with higher specs. Fortunately for ME my DCF894 does what I need and more.

@juanc5149 4 года назад

I wish someone would get a skidmore-wilhelm to get actual torque numbers. Personally, I can’t tell the difference in performance between, Makita, Dewalt, or Milwaukee in the real world. If one of them can take it off, so Can the others, if one of them can’t. None of them can... I take breakaway torque ratings with a grain of salt.

@stupidwapdaggo 4 года назад

I wish realtoolreviews would start reviewing impact wrenches again. He stopped putting wrenches on his skidmore after the Makita XWT08 came out.

@Fee.1 4 года назад

That’s exactly why I don’t care about wilma’s skidmarks

@Fee.1 4 года назад

xrh07 why? I mean I don’t miss it personally but what was his reasoning? That we’re just too off into the weeds and they’re all powerful enough now?

@ions82 4 года назад

Well said. I wish there were a Ridgid version of EVERY tool that Milwaukee makes. I have both 12V and 18V Ridgid but recently got into the Milwaukee M12 game for a few tools (Surge 1/4" driver, extended 3/8" ratchet, 1/2" stubby impact.)

@BiggMo 4 года назад

Comparing the Ridgid with the Milwaukee is a little like comparing a chevy and a gmc. Ridgid and Milwaukee are both owned by the same parent company.

@WorkshopAddict 4 года назад

Not really, but similar. Milwaukee is the top tier, well made, more expensive brand. GMC is also, but they use the same engine. These two do not share the same motor.

@blaudick 4 года назад

They’re not owned by the same company they are made by the same company. Emerson/Home Depot owns Ridgid.

@AlmightyyCres 4 года назад

Where can I get this I was about to get the last gen model when does it hit Home depot?

@jjppsanchez77 4 года назад

Order it online , you can have it ship home or pickup at the store

@alirazmjou2149 3 года назад

درود بر شما متشکرم اقا

@ogm19881 4 года назад

What's your opinion on the kobalt xtr 1/2 impact

@WorkshopAddict 4 года назад

Made by Chervon, the same company that made the Craftsman CP3 line. Not a fan.

@cone6052 Год назад

They were made from the same factory in China TCL

@brettbeez 4 года назад

Looks just like Kobalts new impacts same design on the body of the guns just Lowe's colors and Rigid is clearly Home Depot's

@Jdl223 4 года назад

What make and model of torque wrench is that?

@WorkshopAddict 4 года назад

Sunex 40600 amzn.to/2ysbVCb

@InNerdimensional 3 года назад

Try it on big rig lugs

@WorkshopAddict 3 года назад

We currently use it to put them on, but use a 1" to remove them as it is much faster.

@garrisong 4 года назад

I’m just curious why a farmall 404 of that vintage has a 32mm bolt instead of sae🤣

@WorkshopAddict 4 года назад

Original bolt was stripped, I drilled and tapped with a larger Metric that I had from other equipment.

@garrisong 4 года назад

I figured something like that happened thanks for replying

@kartboarder22g17 4 года назад

Can you comment on what type of battery was on the Milwaukee an HO or XP?

@WorkshopAddict 4 года назад

HO 6.0

@kartboarder22g17 4 года назад

@@WorkshopAddict So, bet the octane beats the Mil when the Mil has a 5XC battery in it. As when that Mil came out it was touted at 1400 ft-lbs, probably with the 5XC battery driving that number, but now with the HO, it probably pushes near the 1500 that the Octane touts.