Тёмный

Rlaarlo AK-917 Speed car vs 1/10 Touring car. 

Popalong RC
Подписаться 12 тыс.
Просмотров 8 тыс.
50% 1

We compare a 1/10 touring car with a 1/10 scale speed car the amazing RTR Rlaarlo AK-917 equipped with simulation devices of controllable light system, decorated but usable spare tire, vivid pattern body design, an aluminum fan for cooling the electronic system, aluminum wheel hub with simulated brake disc & caliper, etc.
This is not the first time we have done speed runs check out our previous attempts in this video
• Our best and fastest b...
- READY TO RUN -
Ready to Run (RTR) competition grade RC is fully assembled with everything needed as well as a 2S (7.4V 3300 mAh) battery
- KEY FEATURES -
Carbon Fiber Chassis: Features with its light weight, sturdy and flat design has more space for modifications, providing a more diverse range of modification styles.
Suspended Independent Gearbox: The new-designed suspended independent gearbox increases the anti-impact strength; 1/8 differential with corresponding 1/8 gearbox used on this 1/10 car ensures the transmission safely and efficiently.
Carbon Fiber Upper Deck: Triangular Carbon Fiber support deck enhances the durability and stability of the whole vehicle, lightweight but stiff enough.
Aluminum Adjustable Shock Absorber: 4 aluminum adjustable shock absorbers filled with high-quality shock oilprovides additional turning pistons, keep the car run and turn stable.
Foam Bumper: The large front foam bumper (0.57" thichness) is integrated with the body to provide maximum protection.
Split Structure Steel Center Driveshaft: Split structure center driveshaft is composed of 2 separated steel driveshafts connected by an aluminum support, which can avoid deformation of driveshaft during high speed rotating.
Professional Hobby Grade Transmitter with Receiver: 2.4GHz 4-Channel Transmitter with 150m control distance, 0.1s response time
Adjustable Battery Compartment: With a unique adjustable battery space for different battery sizes, eaily remove and install the battery.
3300mAh LiPo Battery Hardcase: Features a 35C continuous discharge rating for high performance and longevity. Max burst rate: 50C. Hardcase can prevent the battery from impacting, protect the battery safetly.
- IN THE BOX -
USB Cable *1
Badge Sticker *1
Hex Wrench *3
Crossing Wrench *1
78T Nylon Spur Gear *1
63T Nylon Spur Gear *1
52T Nylon Spur Gear *1
40T Steel Pinion Gear *1
Instruction Manual *1
Double-sided Tape For ESC *2
Configuration & OP Leaflet *1
Battery Velcro Strap *1

Авто/Мото

Опубликовано:

 

10 апр 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@2dark49
@2dark49 Год назад
Be sure to show us how good or bad it is around the track 😁
@islandrc-duke1972
@islandrc-duke1972 Год назад
awesome rc and cool comparison
@MikeChapmanRC
@MikeChapmanRC Год назад
Two videos in one day! You boys are on it.
@teinspringz
@teinspringz Год назад
Good to see the comparison to a real 1/10 racer and note the weight additions for speed running.
@douglaspuglas6888
@douglaspuglas6888 Год назад
R-laarlo can't go wrong think of it as two words lol
@benabnjm4828
@benabnjm4828 Год назад
Hi I was hooping you guys would get one .I ordered the CF RTRip new body metal hub motor mount ..Than I ordered the CF roller for parts or who knows. I got my snrc R3G up to 65 mph so far .Love how quiet it is .
@RichardTardif1984
@RichardTardif1984 Год назад
I predict the edges of the frame are gonna get really gunked up in rubber on that on road track but would love to see what it can do on it
@kyle94scoots
@kyle94scoots Год назад
got the cardoon roller on the way and try it at hrcc
@trevorthomas6043
@trevorthomas6043 Год назад
I would suggest you get a chassis protector for that carbon
@PopalongRC
@PopalongRC Год назад
Will look into it trevor
@robertwood9686
@robertwood9686 Год назад
make sure you sort the antenna wire out its wrapped up with the light wires from the factory needs unfurling
@edisonrao5733
@edisonrao5733 Год назад
Please update the differential grease when running on the track and less than or equal to 500cst
@PopalongRC
@PopalongRC Год назад
We will look into that
@edisonrao5733
@edisonrao5733 Год назад
@@PopalongRC The factory setting of AK917 has a very strong braking force, which is specially designed for extreme speed. If you need to reduce the braking force on the track
@PopalongRC
@PopalongRC Год назад
Good to know
@timesensitive2117
@timesensitive2117 Год назад
John Robinson RC recommends untangling the transmitter wire so as not to lose signal and crash.
@toolbaggers
@toolbaggers Год назад
No need to name drop/list references.
@gillian9178
@gillian9178 Год назад
You need to mod the motor mount to slide the motor closer to the spur when fitting the 40t pinion & 52t spur, otherwise the gears wont mesh.
@PopalongRC
@PopalongRC Год назад
You are correct,
@gillian9178
@gillian9178 Год назад
@@PopalongRC Take a look at Bars&tone Rc video at modding the motor mount, around 2 min in on his latest video on his AK917.
@PopalongRC
@PopalongRC Год назад
Might have to buy a bigger pinion
@toolbaggers
@toolbaggers Год назад
Mumbai? Oh...Bombay it is!
@creativ3vision
@creativ3vision Год назад
@Popalong RC That ESC (120A) is already 6S capable (the CF version; which you already got.) According to their specs (and confirmed with the customer support team.) Not sure about it running on the track, but the non carbon fiber version ran 80+ on the 3S, and different spur gear (included, but had issues fitting properly.)
@ZeroUH
@ZeroUH Год назад
The ESC is, but not the motor. You have to update the motor to get something higher than 4s.
@creativ3vision
@creativ3vision Год назад
@@ZeroUH That’s right. I’m still trying to figure out the correct shaft diameter of the 3660 motor (the brushless CF version.) Originally it shows that it’s 3660 3900kv, which is not even available in the parts store. The only 3660 that’s available are 3570kv(4S) and 2460kv (which is 6S) And according to the chart on their main website, they’re both are 5mm shaft diameter. However, the customer support claims that original brushless carbon fiber motor is 3.175mm (on the website it was showing both, pic showed 5mm and the description below was showing 3.175 mm; for the 3900kv) They said it was a mistake, and will be corrected. Yet confirmed that the brushless carbon fiber motor shaft diameter is 3.175mm. It’s confusing af.
@mantisfpv4514
@mantisfpv4514 Год назад
We call dat a gt chassis
@toolbaggers
@toolbaggers Год назад
I hope you actually setup the car for carpet racing for a true comparison. No point in running an F1 offroad or a monster truck down the quarter mile.
@jerzinho92
@jerzinho92 Год назад
So where is the test?
@PopalongRC
@PopalongRC Год назад
We have to fix it first
@toolbaggers
@toolbaggers Год назад
Aluminimiumum.
@anthonystownsend
@anthonystownsend Год назад
FFS now I can't say it properly, rrrrrlaaaaarrooo
@stuwest3653
@stuwest3653 Год назад
Will a 40mm motor fit on this car?
@fencer39
@fencer39 Год назад
Not another Rlaarlo review. I think every RC youtuber has been sent 1 of these and everybody has done a review of it . Even the crawler guys !!......................Just because they send you a freebie dont mean you got to feature it. you guys are doing great . You dont have to be 1 of the sheep !
@PopalongRC
@PopalongRC Год назад
We have had lots of cars offered and we are very selective as to what we feature on the channel… interested to see if we can get it around a track and race it rather than just speed run ….
@PopalongRC
@PopalongRC Год назад
We have had lots of cars offered and we are very selective as to what we feature on the channel… interested to see if we can get it around a track and race it rather than just speed run ….
Далее
D3 Ваз 2107 Не умри от зависти!
18:57
Rlaarlo AK 917 Speedrun Build
16:54
Просмотров 46 тыс.
2022 1/10 rc touring car first test runs
8:02
Просмотров 6 тыс.
The BEST $199 You'll Ever Spend on an RC Car!
14:47
Просмотров 179 тыс.
Proses Buat Spoiler Hino Lohan
0:55
Просмотров 8 млн