ROAD GLIDE FXR DIVISION MOTORWITCH HANDLEBAR INSTALL! *PERFORMANCE BAGGER* 

I’ve had these on my bike for about a year and a half, I had them make me a chrome set. I saw them on Danny’s 151 Road glide he built to promote leading edge, I asked him where he got them and he told me he had FXR division make them because everyone else’s bars block the gauges, super nice guy to talk to, and the guys at FXR division are awesome.

Thanks to this review I just ordered my set of bars, they’re being delivered to me in London England

Love the bars. And now that I see the floorboards again I think I’m feelin’ them too. Sweet ride man. Stay safe.

Nice, Great bike and video content. Some people don’t take the time to build a bike that fits them. Great work.... time and patience is the key to building a bike.

I ordered mine after watching this video. You're bike looks amazing!!!! I love the trick you said about the fishing line and weight. Thank you for the video. I just hit the subscribe button.

I wish I knew about these 6 months ago for my SGS. Look sick dude!!

Man kid the bikes looking really awesome love the look keep it up!

They look awesome! I think I'll get them for my 2018 Roadglide

Dude thank you so much, I was looking at the Kraus but these are much much better

Great looking bars, just ordered the 14 inch rise as I'm 6' 2". Thank you for the video

Bike is looking great.... like the look of the new bars. Good job !

Got a 2020 performance bagger RGS with MJK bars and riser., Also gauge relocation kit.,,LOVE IT,,, Nice video,,

KST pathfinders. Exactly like the motorwitch but they have wrist angle/palm angle adjustability

I like them because of the width. I have HD tall boy bars on mine. They are 32 inches wide. That is about the narrowest bars I could find in a 12 inch rise. I had Yaffe bars on and they were way to wide. I wish I would of seen the video before I changed bars. The look easy better than mine. Great video.

I just order the exact same bars in a 14” two days ago can’t wait to install them this weekend

love the new bars...bike looks great!

BMC Vindikat hoop-Teeze bars had them on my street glide and about to put them on my road glide... I can ride for hours and no pain they are like tbars .... your bike is hot

very cool love the new bars

Just installed these bars on my 19 RGS about 3 weeks ago and man they are badass! Great feel and great look 🤘🏻

I have these same bars on my 2022 RGS for 3 months and now I’m a little over them and Iv been looking in to the fxr bars and think I’m gonna go with them. I wanted actually T bars but don’t want to spend T bar money.

I ordered the same bars for the same bike. Excited for them to get here.

Definitely gonna get these for my 2021 RGS

Thnks for your posts humble and style together thats a win... Hey listen i saw both handlebars Videos, on pause pictures they looks the same size wise, on style the TBar more aggressive, My Q... if you take the hype out of the new bars, and you want to just think about comfort. Can i believe the Chiz Bars are more comfty? W will be your thought about Chiz Bar but 11 inch? Thanks men!

I wish you made this video 2 months ago!!! I recently bought a 2020 RGL and I had them put on 12 inch Yaffe Monkey bars. Great bars!! But I would have def put these on my bike instead!!!

Looks sick nice setup

Dude, i've had mine on for about 2 months, it's a massive improvement. I love my 12s

I have the same bike 2019 RGS and I am a shorter rider myself 5’7”, I tried several types of bars including the chisel low and had the same problem I was reaching, not enough pull back. I am not a fan of the T-Bars on a RG but I went with the 12” KST Spearhead Bars and love them, there adjustable and I was able to get them set up perfectly for me, Very glad I did it. I also just installed engineer guard you put on yours and it does look great, wasn’t real sure about that until I saw yours.

Recognize how that plate looks, greetings from Detroit 🤘

Just found your channel. Awesome content for us looking at what to buy for our Road Glides. Literally just ordered these bars because of your video. Btw, what seat is that? Keep it up man!!

Looks awesome

Did you have to get longer cables for installation?

idk if I missed it or not but I assume you stock cables and wires worked with the FXR bars??

Does these bars block the the gas/voltmeter gauges? Can u see them without tilting your head?

Good content. You got me on the fence now. T’s or M-Witches? Nice bike! Your video shows all three of your bars. Factory (@ intro), chisel & M-Witch. Here is an idea for more content.Your factory hydraulic brake & clutch lines have a fitting (called a Banjo Fitting) at the reservoir connection. The factory Banjo fitting is a 90 degree type which allows the lines to follow the swooping factory bars. By upgrading to “straight” banjo fittings your hydraulic lines will change direction and follow the bars straight down

Thanks for the videos. They helped my decision in going with 14” FXR Division Motorwitch Bars for my ‘21 RGS. What did you do about the pin at the bottom of the triple trees since there is not a notch hole in these bars? I’m going to have to change something. I’m all wired up and ready to go, so I’m curious what route you went and if you are happy with the choice you made.

Nice ride good video looks killer!

Good looking bars

NICE! I’m 5’6” and I’m having the same reach problem with the chizled low bars. Was just about to order Kraus T bars but this set up will save me about a grand! And no cutting! Quick question about Klockwerks windshield. Does the 6” block more or less than stock? Trying to decide between the 6 and the 9

damn great looking bike you got there. I've been on the market for Tbars but options are limited since I def don't wanna move all my gauges.

What didnt you like about them. Like you im leaning to these as i dont want to chop up of drop the 1500 on t bars

How tall are you? Im a short person myself and I am really wanting a road glide for the long cruises.

Perfect!

I like them!

Great set up , just wondering if the fuel and temp gauges are visible enough ?? Or i need to bend to see them ? How can you adjust left and right risers at the same point?

Nice! 😎🤘

Bike is looking good. I currently have 14” Factory 47 bars and feel they are a bit too high (looks wise), but feel wise I’m ok with. I like the look of shorter bars on RG’s. Most 12” bars are a bit too short for me as I’m only 5’8” and usually have to reach a bit for bars under 14” so I went with the 14s. One thing I don’t like about the Factory 47 bars are they are very wide so would like shorter narrower bars and these look like they may be the ticket. How difficult to run the wires on these?

I like the bars will they fit a 2015 road king

I know this is reaching way back, but how is the flex in these bars? Do they move excessively?

I like the look of the last bars you had more. I was thinking about grabbing a pair actually. The look of the 12" or taller doesn't look right to me for some reason. The other set you had on looked perfect. I get that it's not about look but about comfort. I'm all about the look though. lol Great video!!!

Im literally going through this right now, I had 10" mini apes, and i found that I was leaning forward too much. So I got 14" and are getting installed right now.

Hey thanks for the video. I actually watched your other video with the Harley Chizeled low bars and purchased them but now I am thinking about getting these because I am the same height and reach as you. How are these working out for you I don’t want to be reaching for the sky with bars but want something comfortable? Thank you! Al

How tall are you? Ive been looking at bars for my bike but dont really know or see alot of other roadglides i can test sit on with different bars

Hey doowork productions you should have gone with west coast t bars I run them on my 18 road glide. It feels like a toy with those bars

Is this bar solid? No issue with powered rides?

Looks nice . Might have to get one

They look awesome! Where i ll fit my mobile hanger?

Mine road glide will have those bars very soon

I was just looking at these in a 14” rise for my road glide ST. I was being told I won’t need to change tires or cables for the 14” rise.

They look awesome!!! Good choice. I'm 6'4. So longer reach for me. In your opinion would the 14" be more my height? And , Where did you go to get the longer or extended control wiring and throttle setup? Again beautiful ride you have. Very very nice 👌 👍

What do you have attached to the windshield?

Bars a nice af

I’m running 12” Kraus T’s on my ‘19 RG and there’s no comparison. Your setup is nice, but those are just taller apes. T’s are mounted right to the tree and the feel & control is insane.

Any video putting on heated hand grips 2020 RGS

Love the bike just got a 2020 road glide special is that a lane splitter helmet your wearing in the beginning of the video?

I use a shop vac to draw threw or blow it through with an air compressor.

It finally got warm enough here in Iowa to start riding and well I like the look of these bars on the bike I am finding them pretty uncomfortable for long distance riding….have you ridden these any distance? Might need to go back to a Factory 47 style for the long distance riding that I do.

Hi just fitting these to my RGS2020 did you have any issues with the reservoir clamps not fitting correctly? How did you get the clutch and break line held out the way, mine are looping straight in front of the navigation screen. Thanks

Can you do a review of your new bars? Looks like you’ve had them for a couple months...would be great to hear how you’re liking them.

did you change out the stock riser bushings for polyurethane ? that will also increase the performance and feel .

I just ordered the 14 inch version. I was wondering it looked like 14 inch would require new cables or extensions? Thanks!

When you added the chizeled lo handlebars did you have to change any of the wiring or the clutch/brake line?

The bike looks good

Hi, how are the new FXR bars working out for you, any wind issues to the hands with 12”. Shoulders feel good after a long ride. Thx Donny

Hey bro I can't find the video where you said who made your Harley Davidson saddle bag decals. Think I'm wanting to go that route.

Did you end up sticking with these? I am trying to figure out what I want on my Road Glide ST and like this style alot......I was originally going to go with the HD lo bars you had...thanks !!!!

God that thing is badass

8:36. Keep America Great! 🇺🇸

After you completed the install of the Motorwich bars, did you have excessive left and right throttle tube play? More left right play than stock bars? After pushing the brake and switch housings as far left as possible I still have significant left to right throttle tube play. Let me know your thoughts and experience.

How do these bars compare from a riding standpoint to a mini ape type bar? I know these are significantly more narrow….I have the factory 47 signature bars which are 36” wide.

That Rglide is beauty all around brother very gd video bars looks gd that’s a gd thing you know how to mess with you own bike cause the dealer will have your bike sit there for a few and charge you a arm and a leg 👍🏻 hope to see some riding uploads soon stay safe stay bless stay healthy 🙌🏽🙏🏽✌🏼

what size r the badges on your tank

I’ve had mine on my 2020 RG for about 5 months and could not have asked for a better bar with a great look. Got the 14” bars and I think everybody who wants to go t-bar on their bike should look at these bars.

How do you like those FXR bars so far? I’m interested in putting a set on my 2020 road glide

Awesome bike!! The seat is banging! What kind is it and where can I get one?

Where u get ur air cleaner from?

You did the fxr and kst! What do you suggest? I want the 12”. Am 1.79m .. i dont have the luxury to buy several ones. I was also looking at the factory 47 bars.

Thanks for the great videos! Love the look of these bars! Trying to decide between the 12 or 14 inch. How tall are you? I'm 5'11" and wondering if 14s would be a better fit

Just got my M/W 12s. Did you have to drill the holes on the front side of the bars for your factory clutch and break lever clamps?

Any other performance mods coming? Great videos and content btw.

Great content , what exhaust are you running. Thanks

Did u have to change cables and extend wires i have a 2011 road glide ultra

Just ordered a set after watching your video. How many hours labor do you think install is?

Did you have to take off the clips to get the wires through or was that only on your first set of bars?

Great video! Now a few months later, how do you like these bars? Also, how tall are you?

Did you have to drill the hole at the bottom? My bars didn't come with the second hole for the clamp?

how do you like the bar so far ? any pain point using it for long ride? what is your height? I'm 5'11'' ist .. I like 12". I'm not sure between 12" or 14" Thank you

Where’d you get that helmet from?

What kind of helmet do you wear bro?

? what the name of that phone mount you are using

Thanks for the still shot of you sitting on the Road Glide with the new bars. They look like the perfect height for you. But how tall are you? I’m 5’7”, so I’m wondering if I should get 12” or 14”. Yours are 12”?