Roborock S8 MaxV Ultra with Refill & Drainage System Unboxing and Installation under kitchen Island 

Almost 2 weeks and its working out great out of the way. I had s7 Maxv Ultra and it was in my dining room near corner and so glad I was able to tuck this one out of the way. Laundry room be a perfect spot as well.

@daktusdurggery5505 yes fridge line works, and as long as washing machine drain is not 3 ft above the dock connection otherwise too high of a lift for pump to function properly

@@TecYimBroke washing machine Lin is above 3ft so what fitting would be needed to plumb directly into the drain line?

@daktusdurggery5505 actually if your able to squeeze the hose in next to the washing machine hose that would work fine just need at least 6 inches of hose to go into drain and them the washing machine hose will help pressure it in place. Thats simplest fix. Otherwise you need a splitter something like this amzn.to/3xPA04w

Yes its pumped, they recommend drain not be higher than 3 ft of elivation above the dock at any point for the hose.

I am not sure on that because there is no specs posted on the dock power input itself at least that I could see.

Yes sink is the standard connection. It comes with a adapter to attaches to your current cold water line, you will just have to buy a 3/8 drain adapter from local hardware store.

@@TecYimBroke one more question, also what about the laundry room can I connect it there too?

@@xzplr3181 Yes, that is another great option you will just have to get a 1/2 splitter to 1/2 and 1/4. Also if drainage pipe is taller than 3ft might have to plumb in the adapter lower for drainage. @xzplr3181

@@TecYimBroke alrighty thanks!

Hi, I agree they should include some adapters for different sizes, but in the United states the most common connection foset supply line is 1/2", this is probably the reason they only included that size.

Actually it’s not. Shut off valve is 3/8 on the faucet supply line side. The faucet side of the supply line is 1/2 inch but you aren’t connecting to the faucet you are connecting to the supply line. I couldn’t find 1/2 inch in ACE, Home Depot or Lowe’s, or Amazon. Couldn’t find a 1/2 inch shark bite shut off valve to replace the one I have which is 1/2 copper to 3/8. Washing machine is 3/4 so that didn’t work either.

@bluehannah8696 do you have copper lines? If so why not use the fridge connection like I used, very easy to install, self piercing and available most hardware stores. If you have pex then you can get sharkbite version as well.

It was actually a very brilliant solution for someone with your set up. My utility room isn’t near my refrigerator but I could drill through floor and find a water line somewhere in the basement but it just seems silly to me me to have to go through that effort when a simple 3/8 inline connector would be installed on 5 minutes. However after this conversation with you, I did relook online instead of just the store for a 1/2 inch shark bite shut off valve and I can get one. However I will have to disassemble my whole sink to reinstall it with 1/2 inch plumbing rather than the existing 3/8. I hope that I really love this vacuum after I go through all of this.

@bluehannah8696 That sucks. Its been a few weeks now and im still loving mine, hopefully works out as well for you!