Rolling Tool Cart / Planer Stand DIY

Подписаться 613 тыс.

Просмотров 71 тыс.

50% 1

How to make a rolling tool cart. I am using this as a rolling planer stand. Building a tool cart doesn't have to be hard or complicated if you want something simple and cheap. This really is a cheap tool cart, coming in at around $45 for materials. This makes a great DW735x planer stand. This is a simple DIY tool cart that anyone can build. A great way to add tool storage to your shop is to build a tool storage cart like this. This is an easy tool cart to build. Obviously there are fancier carts than this. However, if you want an inexpensive tool cart, this is the way to go. I used 7/16" OSB as my decking and 2x4's for the structure. You can use plywood if you wanted a cleaner look to your utility cart. Check the links below for the supplies, tool cart plans and tools used in this build. This rolling tool cart is easy to move around the shop and will keep tools stored off the floor. Being able to easily store my planer on this cart will be so convienent. This planer cart will hold the 735x planer without any issues. If you want to build a DW735X planer cart like this, let me know in the comments below. You can use this as a drill press cart, band saw cart, or any number of tools. Affiliate links below.
My review of the 735x here: • DeWalt DW735x Planer U...
Tools and supplies used in this build:
Heavy duty casters: amzn.to/2EVUyMy
Pocket hole jig: amzn.to/2Soz4uk
DeWalt Planer: amzn.to/2D5ps32
Orbital sander: amzn.to/2EOIyfH
Wood glue: amzn.to/2qfiMH9
36" clamps: amzn.to/2SoZI63
Cut List in the blog post here: www.731woodworks.com/731-blog...
Other Tools I use and recommend: www.amazon.com/shop/influence...
#toolcart #planercart #dw735x

Хобби

Опубликовано:

5 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 118

@731Woodworks 6 лет назад

Check out my top videos: ru-vid.com/group/PLWVlC66wUw8bz3aDDBzdPhub5QF1FovEt

@eddiesoto6990 2 месяца назад

I looks at these videos and I see how much progress you've made. Your a big influence in my journey to become a better woodworker. Proud of you bro!

@731Woodworks 2 месяца назад

Thank you! 👊

@cabman86 3 года назад

With my little 8x12 shop, I put 10 inch pneumatic tires on mine so I could roll it out in the yard.Great build!

@rubencabrera9661 5 месяцев назад

I heard that brother! I'm 62 years old and I've had my DW735 since they came out. I love it, but that thing is a beast to move, even when I was younger and stronger. A dedicated mobile stand is the way to go!

@pedro-marques-jesus Год назад

How funny is to see you and your workshop 4 years ago. congratulations for all your work

@barbarabrindza1845 2 года назад

Thank you! Finishing up the cart today and can’t wait to set up our new planer.

@joebanach7528 2 года назад

Just got rid of a bunch of scrap and made myself a nice lil cart for my planer. Thanks!

@glenschumannGlensWorkshop 3 года назад

Thanks. I will need to build several rolling tool carts this coming fall. This may be the simplest method I have see so far.

@justinthomas4442 Год назад

Love this tool cart, I’ve built 3 of em so far. Thanks again!

@janiesmith1558 2 года назад

Hey buddy! I’m loving the simplicity of the table! I’m planning on one each per equipment, ie planer, belt/disc sander, table saw, and router. Thank you!

@vincentdeleonjr1039 3 года назад

thank you for your description and clear simple build

@tales_of_the_crypto1583 3 года назад

I bought all my Craig's tools about 6 years ago never used them, life got in the way! Looking forward to getting back into it glad I found your channel!✌💞💥

@731Woodworks 3 года назад

👍🏻

@johnhisley3386 Год назад

Thanks for your video. This will be my first project come January 23!! LW... I will be looking for more simple ideas as I begin to build my work shop. Thanks

@cjd82187 2 года назад

Just built this to put my planer on and my sander. Been meaning to do it for a while and finally have a project I need it for. The ripped 2x4 felt a little weak but I was also about to run out of long enough pieces anyway so the rip came in handy. Put a full 2x4 as a cross brace on the bottom shelf too to make me feel better, but again the top was really the important one because the planer is so heavy. I used 3/4 plywood instead of OSB which is probably a little sturdier. I climbed up on it and shook it (and I'm about 240lbs) and it felt rock solid. I just used pocket holes without glue in case I ever want to take it apart to modify a bit in the future.

@seanhayes5928 4 года назад

With that simple design, you could easily encase the stand for covered storage. Nice job!!

@731Woodworks 4 года назад

Absolutely. Or add drawers, shelves, etc

@scottmetal 4 года назад

Used your plans for this and built one yesterday for my planer. Worked out perfect!

@731Woodworks 4 года назад

Awesome! Glad it helped!

@yamahaxt652 2 года назад

Wow just watched the router stand video which referred to this one. Matt your channel has gone so far since this video! A true inspiration my friend!

@codacreator6162 3 года назад

Man, even your simple, throw-together projects come out looking so professional. Mine look like a 5 year old drew the plans with a crayon... Thanks, as always, for sharing!

@731Woodworks 3 года назад

lol thanks

@davidmata2202 2 года назад

Easy and simple thanks bro.

@justinthomas4442 Год назад

Great video bro, thank u!

@woodworksbygrampies1284 2 года назад

Hola! 🖐 So cool to see your shop improvements. Doesn't it feel that much better when you can utilize "scrap" wood to build something so useful. Great job. Take care and have a good one, Adios! 👊

@LYTOMIZE_Woodshop Год назад

I still don't have shop furniture in the new shop... I will make one of these Sunday. Maybe three - planer, spindle sander and router table!

@mountainsagewoodworks4663 3 года назад

Great build!! I'll be doing this tomorrow.

@731Woodworks 3 года назад

awesome

@oraliaespinosa4880 8 месяцев назад

Great idea I’m about to build one myself lol I built a bigger one had the same problem about the wheels easy fix

@deepakkapoor5232 3 года назад

Nice. Simple and quick to make. Great!!

@731Woodworks 3 года назад

Thank you! 😊

@jennym.9099 2 года назад

Great project!

@oldmanpottering 2 года назад

Nice work, thanks for sharing

@perry.dillard Год назад

Just bought the DW735X so I'm gonna build this cart as I have very limited space!

@russellfay81 3 года назад

Hey Matt, thanks for the layout. I found it not only easy to do, but very universal as well. I made a cart for my planer, (same DeWalt model as yours), and then modified the dimensions to make a stand for a jigsaw table too! I wanted to use a jigsaw like a scroll saw, it came together really quickly and turned out great. I actually had to stop myself from over-engineering it! BTW, one mistake I made on the planer stand was buying casters from Harbor Freight. Not worth it! You truly get what you pay for!

@731Woodworks 3 года назад

For sure. Thank you

@gregghernandez2714 Год назад

I need a new shop cart so I have been looking at various videos here on RU-vid. It is really great to see how much you have grown as a presenter of your various woodworking topics. You seem so much more relaxed and comfortable in front of the camera now. As others have said, you just seem like the kind of guy that you would like to go to a Restaurant, have a nice meal with and talk shop. I have no doubt you will reach your goal of 1 million subscribers before you know it.

@731Woodworks Год назад

Thank you Gregg

@codacreator6162 3 года назад

I bought my beast cart from a dude on OfferUp, but still need one for my Bosch bench top router table. Perfect!

@731Woodworks 3 года назад

👊🏻

@jessechappell2 3 года назад

Watched this yesterday. Wanted to say it's a good build and you can tell how you have grown as a maker and content creator. Any projects you would revisit and rebuild now, talking about some lessons learned? I think that would be a good series.

@codacreator6162 3 года назад

Pure luck! I just bought the same casters and was looking for a simple cart for a job site table saw. I didn't even think about the width of the tubafors and mounting! Saved. Thank you!

@731Woodworks 3 года назад

👊🏻

@lburwell99 5 месяцев назад

Been watching your channel for almost a year and funny watching this old one seeing no beard lol.

@jerrydempsey5428 5 лет назад

Good Video, simple and easily understood.

@731Woodworks 5 лет назад

Thank you!

@cindyw7004 5 лет назад

Thank you for the informative video. I think I have everything you mentioned as far as supplies except for the pocket hole system. Hopefully I can get by without it ( will countersink the screws). Plan to start the build process this weekend.

@731Woodworks 5 лет назад

Thank you

@alexfrederick9019 2 года назад

That's a great point of putting the locks on one side vs the locks on one end.

@grantheathman 4 года назад

Thanks for this video, I made a cart on Saturday very solid much better than the cheap HF metal cart I was looking at...

@731Woodworks 4 года назад

Glad it helped!

@derekwalkerrr 6 лет назад

Solid build bud!

@731Woodworks 6 лет назад

Thank you my friend.

@jamespolucha8790 5 лет назад

Thanks for the video, this is exactly what I was looking for, all the other videos on this are good but I really don’t need all the fancy joints and planing down the 2x4s for a clean look , I just need what you built, that’s again

@731Woodworks 5 лет назад

Great! Glad it helped you!

@mickey533 4 года назад

Very nice!

@731Woodworks 4 года назад

Thank you

@SVisionary Год назад

Sometimes simple is best. Especially when you're unsure if you're going to keep the project forever or might upgrade later provided you find yourself with more space. I'm also working in a 2 car garage and still have to be able to make space when needed to bring a car in when we get hail.

@mountainsagewoodworks4663 3 года назад

Great video. My dewalt planer is being delivered today.

@731Woodworks 3 года назад

Awesome. Congrats!

@johnfilicicchia1651 3 года назад

Thanks! This is just what I need to build today!!!

@731Woodworks 3 года назад

👊🏻

@johnfilicicchia1651 3 года назад

As a retired educator -over 30 years- a huge shout out to your wife!

@731Woodworks 3 года назад

Thank you. She’s loves what she does.

@johnfilicicchia1651 3 года назад

@@731Woodworks 😃

@bobmoore6151 5 лет назад

Thanks much for this video. I followed your review of the planer, and mine arrived yesterday. I first thought about making the cart to where I could put a removable top on it, above the planer top, to stand in as an extension table for my saw, but found that the planer table would be too low to function well. I'll give this a shot and make it like you did. Since I don't have the pocket hole jig, I'm going to use half laps. That requires different 2x4 dimensions, but not a thing at all. Oh, for some of your viewers, OSB is Oriented Strand Board, and as you say, just glued up wood chips.

@731Woodworks 5 лет назад

Thanks. Cool idea on the half laps. I’d like to see pics of your finished product if you want to share.

@bobmoore6151 5 лет назад

@@731Woodworks I've done some pictures, but still not done with the project yet. I decided to add 4 drawers to the side of the case, and am still trying to figure how to set the middle divider up easily. (Everything's glued and screwed up already.) :) Should I email them to you? I don't have a blog or web site.

@731Woodworks 5 лет назад

Gotcha. You can email them or I have a Facebook or Instagram accounts @731woodworks

@CrossCutCreations 6 лет назад

Awesome build! I'm getting ready to do something similar for the new Rikon lathe I ordered!

@731Woodworks 6 лет назад

Cross Cut Creations thanks! Hope you do a build video of yours!

@CrossCutCreations 6 лет назад

731 Woodworks That’s the plan as of now! 😀

@731Woodworks 6 лет назад

Awesome!

@lextheap1638 Год назад

Man, I miss when construction lumber wasn't absolute garbage to work with lol. Have to joint any I get just so I can use it

@PaganWizard 4 года назад

I'm a new viewer AND subscriber to your channel, in fact, this is the first time I am seeing any of your videos. I tend to use my headset a lot while on RU-vid, and I noticed that when you were doing your voice overs, it was only coming through on the left channel. That might be something you want to look into. Although, this video is 2 years old, so maybe by now, you have that sorted out. Great project!!!!!!!!

@731Woodworks 4 года назад

Thanks for the info.

@donnamartin2568 3 года назад

Well I'll be making three, one for my son, one for my daughter and one for me!

@731Woodworks 3 года назад

Nice

@markw5690 5 лет назад

I've got a 735x on the way, be here in a few days. Would like to make the stand prior to arrival but can't find any dimensions with the in and out feed tables, could you add that info? Also my garage is set up to put all my carts under a long table/bench along one wall so height would be appreciated as well! Great video.

@TheFishbulb80 2 года назад

I like this plan but I'm wondering a few things. 1) wouldn't it be stronger to run a 2x4 UNDER the legs to attach the casters to? (Instead of between) 2) I recommend turning the top supports on their edge/vertical.

@matts4184 Год назад

This is great! How long are the 2x4 for the legs? What is the width also?

@markw3598 5 лет назад

Harbor Freight has great casters, and they are a lot less money!! I use them all the time.

@731Woodworks 5 лет назад

I didn't realize that! Thanks for the info!

@stevesiefken6432 Год назад

Nice quick cart. Why didn’t you build it to be the same height as your bench?

@sflagg0817 2 года назад

I've watched this and want to use your plan for my planer as well, not the Dewalt I went with the Wen but nevertheless should work fine j was wondering I wanted to use 4x4 for the legs and 2x4 for the rest and OSB for the top, I also was thinking about putting my miter saw Bosch GCM 12 SD so I can roll it into driveway in summer months, I don't have a dedicated Mobil miter saw stand the Bosch one is like 329 bucks and seems kinda expensive for a stand but the saw is 629 bucks so I guess you want it to support your investment anyway that is why I wanted to use the 4x4 for the legs because I thought it would be more stable

@Honu425 6 лет назад

OSB----Oriented Strand Board

@731Woodworks 6 лет назад

Yes. That’s it. Thanks.

@christofix 5 лет назад

Last week i made a rolling tool cart for my new table saw. It is about the same as yours. You can see it in one of my videos in the next weeks. Great build. I'm new here and i think your channel is worth following it. Greetings Christofix

@731Woodworks 5 лет назад

Thanks. I’ll check yours out.

@christofix 5 лет назад

@@731Woodworks thank you so much. i think it is great that we can learn from eachoters feedback

@731Woodworks 5 лет назад

Thank you!

@christofix 5 лет назад

@@731Woodworks you are welcome my friend

@drab31s 4 года назад

Thank you for the video/blog. Question about the 2x4s used to create platform for casters: they just overhang the inside of the 2x2s? Thanks for advising.

@731Woodworks 4 года назад

Yes

@drab31s 4 года назад

@@731Woodworks Thanks for quick reply.

@bobbyjordan7927 5 лет назад

Great idea. How do you like the DeWalt 735X planer?

@731Woodworks 5 лет назад

I like it. It is a great tool to have in the shop!

@stripermanly 3 года назад

Did you make it the same height of your work bench off the outfeed? Would work good I think to minimize snipe off the end of the boards as the exit the planer.

@731Woodworks 3 года назад

It’s not the exact same height but that’s a good idea