Ronin Euro #2 - Finally a Sub-$400 Longsword I Can Recommend!

Подписаться 1,6 млн

Просмотров 128 тыс.

50% 1

* Specifications *
Overall length: 117 cm / 46 in
Blade length: 92 cm / 36 in
Weight: 1286 g / 2.82 lbs
Blade material: 1075 spring steel
Hilt material: Stainless steel
Construction: Full tang, peened
Pros / Cons
+ Effective blade geometry
+ Excellent weight and balance
+ Flawless finish
+ Affordable, good for beginner cutting practice
- Pommel started to loosen during testing
- Awkward round section in the center of the grip
Where to get it:
ww4.aitsafe.com/go.htm?go=kult...
To support the channel:
/ skallagrim
www.patronblades.com/skallagrim
For one-time donations: www.paypal.me/SkallagrimYT
Get in contact or see a list of my video uploads:
/ skallagrimyt
/ _skallagrim_
Follow me on Twitch: / skallagrim_yt
My favorite online store for buying swords (worldwide shipping):
ww4.aitsafe.com/go.htm?go=kult...
Where to get HEMA gear and practice swords:
www.woodenswords.com/?Click=1799
Channel-related shirts and other merch:
teespring.com/stores/skallagrim
skallagrim.spreadshirt.com/
Things I recommend on Amazon:
www.amazon.com/shop/skallagri...
My side channel (for rambles, vlogs, opinions, gaming, etc):
/ @skallhalla
Best-selling knives on Gearbest:
www.gearbest.com/promotion-be...
15% off on GearBest Outdoors & Sports products with coupon code "out15off": www.gearbest.com/lifestyle-c_...
#Skallagrim #Review #Longsword

Развлечения

Опубликовано:

7 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 458

@devin5201 6 лет назад

*Sword isn't his. *Swings it at wooden panels. madman

@Skallagrim 6 лет назад

I did communicate with the owner before doing this, you know. :p

@mattcoops82 6 лет назад

Yeah, grunts and threatening hand gestures...

@devin5201 6 лет назад

@@Skallagrim 👍👌

@PeachDragon_ 6 лет назад

R/ mad lad

@emrevurgun33 5 лет назад

the wood is not that hard and he didnt strike full force so there were no major risk i think

@mattmanbrownbro 6 лет назад

Looks like Ronin is improving their quality. Two years ago, they weren't recommended. It's good to see that the market is improving.

@Tycini1 6 лет назад

Oh man

@mattmanbrownbro 6 лет назад

@@Tycini1?

@TheJommy34 6 лет назад

Oh my goodness

@BoopSnoot 5 лет назад

What about a sword that's reasonably authentic (not some chrome jobber), but primarily just meant for display in that price range? Anything to recommend? Bonus points if its German or Scottish since I'm a mix and would like to pay homage to the heritage.

@williamspetter2823 5 лет назад

Matthew Brown dude I found your channel bc of your metal vocal videos lol I came for the metal videos but stayed for the sword videos bc I also collect swords, knives and axes and practice hema 😂😂

@unpopularspirits829 6 лет назад

300 euros for a euro? You sir, have been scammed.

@matiashogden1240 6 лет назад

Unpopular Spirits The salesman probably ended him rightly on beforehand

@TheWindows72306 6 лет назад

@@matiashogden1240 hate to break it to you but the salesman did not. he threw many pommels.

@sparviero142 6 лет назад

Inflationsaption

@howdoilogin 6 лет назад

Player characters crashed the gold piece economy, this is why the country has gone back to the stable currency of +1 greatswords.

@stitchowi 6 лет назад

HowDo ILogin i dont know what you mean but i like it

@mayalackman7581 6 лет назад

I have an arming sword from Ronin 's Euro line, and I can confirm that they make quality swords.

@erichusayn 6 лет назад

Finally. a review by a competent person. I did one a while back but I have far less eloquence, much less knowledge, and no editing whatsoever. Thanks.

@nothisispatrick4644 6 лет назад

Is it guranteed to chop a dark knights arm off?

@trashyalice1756 6 лет назад

Tis but a flesh wound

@aldor9357 6 лет назад

It would be just a scratch though

@german_doomer9934 6 лет назад

just end him rightly

@DeathMetalSon 6 лет назад

But what is a dark knight without hands gonna do to me? Bleed me to death?

@maun4rah 6 лет назад

he is going to spit in your face and kick you

@ultrixcrucesignatus1261 6 лет назад

I've got their double fullered model with the fishtail pommel. The round riser sits lower on that one which, to me, feels very comfortable in a handshake grip. The stitching is noticeable, but nothing that ever bothered me. I get the impression Skall's a tad particular about his grip covers. The thing's built like a tank. Though on mine the pommel's still rock solid, but the guard has loosened up quite a bit. It's also a fairly hefty sword, so it can get pretty tiring in a flow drill. My only complaint is a lack of authenticity. It feels modern. The fit and finish is good, but it feels kinda like IKEA furniture compared to something more historical.

@ConstructmanPsion 6 лет назад

I don't have that good an artist's eye, so could you point out some features that stand out to you as modern?

@LCRDKazrai 6 лет назад

I was looking at getting that one for myself in the future. I hear a lot of people say that the #1 feels solid, but is tip heavy and feels more of a cleaver than a longsword. What's your opinion on that point? I ended up getting myself the #7 since it seem to be the popular choice and has the most positive reviews. I can say that it stands up to those reviews quite well.

@terricus 6 лет назад

I have that one too. Nothing's loosened up though. Also, I dont know if this is what you think too, but I think if it feels "modern" it's because the aesthetics are basically flawless. When I look for imperfections I don't find any.

@ultrixcrucesignatus1261 6 лет назад

I'm not sure how to describe the "modern" feel. Zach hit part of it, it lacks any real handmade charm. Past that the scabbard (Which fits the sword very well.) is plain, and the leather isn't the best quality. On mine the fittings are a little rough up close, giving them a machine made look. I wouldn't say "cleaver", but as I said, it is pretty hefty in its handling. The point of balance on mine is about six and a half inches from the guard. I get decent control over the point, but it's not super responsive. Feels great in a cut though. The end of the fullers marks the center of percussion. The weight comes from the thick hexagonal cross section. It has a nice distal taper, but it's still pretty thick towards the tip. If you want something agile, I'd go for the #2 model from the video. All in all I'm very happy with mine. Ronin has done extremely well with their euro line from a functionality stand point. And for the price I'm not going to fault them for the aesthetics. (Or at least my view of the aesthetics.)

@matthewboan616 6 лет назад

Well hopefully its nice enough that you dont feel like you bought the wrong thing

@DerakosZrux 6 лет назад

I love budget recommendations! Started looking at best budget options for ARs too, like PSA.

@AgentTom95 6 лет назад

Glad that there are some longswords that I can afford and get some good practice with. Thanks Skallagrim!

@NinjaRabies 6 лет назад

I have been eyeing Ronin's longswords before because of some really good reviews, including an abusive test alongside a Hanwei Tinker longsword. That was a few years ago. It seems their stuff is quite solid!

@jesse6777 6 лет назад

congrats on your 1million subscribers, still very much enjoy your video's and keep on going

@hamtastic5778 5 лет назад

Bought this sword a few months ago and it's incredibly well made. Holds an edge very well and the balance and weight are amazing for long sword. Similar gripe about the grip(specifically the pommel shape), but I have smaller hands so it actually fits rather well with a 2 handed or 1 handed grip. Handguard is great, the sword overall is sturdy and it's almost on par with my zombie tools. If zombie told made a sword exactly like this I would buy it in a heartbeat, but for less money, this is a great sword.

@devinm.6149 6 лет назад

I always seem to see these videos on the home page about ten or more minutes before I'm notified of them.

@AxlPatrol 3 года назад

Ronin Katana really stepped their game up, and their medieval swords are surprisingly good. I've gotten so much junk for the sub $500 price that this is one of the few rare gems of medieval swords that aren't costly.

@terricus 6 лет назад

Ive been waiting for this for a long time. I have the #1 model and it's great

@joshbogarin8007 6 лет назад

Great vid skall reminds me of some of your first stuff I watched

@terricus 6 лет назад

Oh also I absolutely love the grip stitching. Since its aligned almost perfectly with an edge, I grip it with the stitching in the nook between my thumb and pointer finger. Helps me with edge alignment and feels great.

@chriscalvin5083 6 лет назад

Good video skall

@tophatgorilla2716 5 лет назад

I used to collect and practice with (cheap) swords heavily and am getting back into it for exercise and weight loss. This review and a few smaller details pointed me toward ronin instead of cold steel for my first bastard sword since quitting. Thanks.

@kamatong 6 лет назад

ohhh excited for this one, hope its a good review!

@TRA25 6 лет назад

This is probably going to make my day when I watch it

@calamusgladiofortior2814 6 лет назад

Nice to see a decent, budget-priced cutter on the market.

@BeamMonsterZeus Год назад

Just ordered the #1. I know it's a budget sword, but holy crap. Getting something of this quality for so cheap is amazing.

@r.matthews594 6 лет назад

It's good to see some high quality budget Euro swords are the market, I think that will only help HEMA grow in popularity. Price for quality cutters is a barrier for a lot of people. This is a step in the right direction. Ronin's Euro offerings were suspect at one time, while their katans were always a pretty good value. Nice to see that is moving to their Euro swords.

@NicholasNappi Месяц назад

I appreciate the honest review. Honestly I used to watch shadvirsity but I don’t like the fact that they are not honest about if something is affordable or not. I always respect honesty and I don’t respect shadvirsity because he said things were affordable just to get viewers and subscribers and he was pushing a narrative that the only people who helped his channel was the people who gave him money. But there are so many other ways people can help a channel get more subscribers like spreading the word to new people. But on the other hand I appreciate your honesty and your genuine reviews. Much respect to you.

@darthblade2016 6 лет назад

Awesome slo-mo!!!

@edgartheslayer3 6 лет назад

thanks for the review, always nice

@TheTaleForge 6 лет назад

The double-fullered version looks quite nice, with a bit more space before th e ridge for the hand to rest.

@zackakai5173 3 года назад

I got one of these yesterday and they actually did a better job with the finish on the pommel on mine than the one in this video. You can't even see the mark from where it was peened. Personally the stitching on the hilt, while noticeable, really isn't obnoxious at all. For the price this is a really solid buy.

@Kvasnikov 6 лет назад

Ooh, I was thinking about getting this one. Thanks! :)

@hunterbrooks826 6 лет назад

Skallagrim, I looked at one of your posts yesterday and noticed today that I needed to resubscribe. I hope, if you see this, it helps to narrow down some of the RU-vid issues you’ve been experiencing.

@samwilliams5283 6 лет назад

Since it sticks out, if the stiching indexes with an edge that would always be the leading edge. The way I hold bladed weapons.

@cubancigarman2687 4 года назад

I bet you that this sword is better constructed than most arming swords of period times. Our present methods of production, metallurgy and consistency is vastly superior to those swords of the past. The question will always be nit picking to materials, finish, cost, and weight.This review was very sensible and informative as usual! Thanks for posting. I agree that it would be really fun to use someone else’s sword on a wooden pallet, just in case per say they wore wooden plate armor! lol

@peterlustig8021 6 лет назад

punch a hole/dent into the end of the tang, will shove out the metal and tighten up the pommel. but bear in mind, it wont come off if you want it to. that is a quite permanent fixture, but i'd definitely consider it

@jamesm1 4 года назад

Just ordered this off their scratch and dent sale for just $225 AND a Dojo Pro for $165, VERY EXCITED!

@SuperFizzah 3 года назад

So I just got this sword in late 2020-2021 I ordered Christmas day as a present to myself and arrived from them the second week of January, given the holiday and covid, I'd say that's pretty awesome shipping. The handle on my model doesn't have as much of a bur where the leather is sewn together, it lays much more flat against the handle. Maybe they changed how they stitched it after numerous reviews pointing it out. The blade itself feels awesome, and I cut threw our old Christmas tree from the top down to about 2 feet up from the base... The only complaint I have is the guard came a little loose after hacking threw the thick parts of the tree, but it's a sword not an axe, so I'll mark that up to abuse beyond intended use lol. The blade itself suffered no damage at all, no bends, no edge deformity, just a solid beast for the price.

@marz6770 6 лет назад

*Random pommel comment*

@FenrirFire18 6 лет назад

Good looking as well, my good sir.

@paulkokenes6205 6 лет назад

Heres a question: how does a moderate "budget" sword like this stack up to the norm of swords back in their time?

@Ranstone 6 лет назад

That.. Is a really good idea... It would be hard though... Like nowadays, medieval swords had high and low budget models. Some swords used in combat (Well, found on battlefields) originally were worse made than cold steel. I bet Skall could compare a modern budget sword vs the quality of the average artifact we find... That might work!

@KatoCoyoteCombatWorkshop 4 года назад

I understand that I'm replying to a year+ old comment but modern steel is almost perfectly homogeneous and we understand it to the point where we can differentiate between different levels of carbon as well as additives like manganese and chromium. Not to mention that our knowledge of heat treating and tempering is almost undoubtedly superior to what they knew in the medieval and European renaissance periods. So long as a "modern" sword doesn't cheap out, I wouldn't doubt that a model like this would outperform and hold up better than anything that would have been made back then.

@jamesm1 4 года назад

@@KatoCoyoteCombatWorkshop If you could somehow ensure your safety/health, it would be so cool to go back in time as a merchant with a cart load of modern quality swords and watch knights ooh and aah over them and argue about who was going to get to buy what lol.

@KatoCoyoteCombatWorkshop 4 года назад

@@jamesm1 Ah yes the mysterious arms dealer, known for his exceptional quality weapons and tabard bearing the heraldic crest "Supreme", was unfortunately killed in a... tragic horse accident. In his honor we have distributed his arms amongst the noble guard. No more questions.

@jamesm1 4 года назад

Then some archaeologist 600 years later digs them up and goes "what the actual fuck!?" when they get the lab results back on the steel lol.

@nawfside1302 5 лет назад

I fell in love with this

@majorbeef9394 6 лет назад

That sword is dope man, good sword right there

@Zach-cg7dw 6 лет назад

Budget sword vids are the best !

@lorddemonoss3945 6 лет назад

Awesome. I'm planning on buying one online. I have a small collection of of swords and axes, plus knives.

@taylor_green_9 6 лет назад

I love the look of this sword

@pmodd 6 лет назад

No issues that couldn't be solved with a grinder, some leather wrap and glue. Grind down the center of the handle to match the rest, re-wrap and the sword should feel and look better.

@HLDrums 6 лет назад

The slow-mo looks so fucking good 👌

@Fjuron 5 лет назад

The stitching sticking out will at least let you feel the edge alignment, so the round section in the middle isn't so bad. 😜 Otherwise, a beautiful and elegant weapon. 😎 I think I will buy this one, as soon as it is available again.

@DoctorKhaos 6 лет назад

As long as this let's me rescue princess Zelda then I'm happy

@lastditcheffort3979 2 года назад

I just bought Euro model#1 the handle is the same. I would agree that it feels too round. It is 3.9 lbs. it is well made for the price; everything is nice and tight including the scabbard fit. The only other complaint I have is that the balance point is a little too forward for my taste. It balances about 6 inches in front of the guard, so it feels a little tip heavy but is not unwieldy. Other than that I have to say it cuts very well. It is well worth the price; great beginner sword. I have beat the crap out of it and it has held up well. Nothing has loosened and it has kept its edge.

@zZloff 6 лет назад

Also finally: Another Sword Review! YES!

@sfasdhga 6 лет назад

always curious i was that thing. ronin katana european model. thanks skall :)

@dracon501 6 лет назад

When handling any long weapon I always wear gloves even if tgey are just baseball batting gloves. So with the raised wrap on the handle would work great for me.

@NotTheCIA1961 6 лет назад

I might get myself one of these... that's not bad, and it's within my budget for a first sword.

@antoniettourva6016 3 года назад

Joe it is ?

@rake483 6 лет назад

05:35 Pommel ASMR Kreygasm

@SuperFizzah 3 года назад

Anyone looking at this video here in 2020 thinking about purchasing this sword, I just bought myself one for christmas and just wanted say that they seem to have fixed the handle stitching. At least on the sword I received, they appear to have a different pattern and it sits flat along the handle now, there isn't an uncomfortable ridge protruding along the seam.

@unitedstatesofamericareal 6 лет назад

That is pretty cool.

@stefanodogg280 6 лет назад

Prefer my Windlass Scottish war sword. Peened pommel, great balance and good steel. I added a cord wrap over the leather handle and it handles most excellently. It was 175 bucks and if they make another run I'd buy two more

@paladinhansen137 6 лет назад

The future looks good boys

@thegreatlemmon7487 6 лет назад

I got number 3. They are pretty good

@thegreatlemmon7487 6 лет назад

Btw. I recommend getting it off the sword buyers guide store. It's cheaper and better shipping price.

@KuLaydMahn 6 лет назад

I got the #4 and I'm no scholar, but it sure feels good to hold.

@johnhans2929 5 лет назад

I hope you get to evaluate some other Ronin European designs; I quite like the look of their swords and am considering buying.

@kaerlefarouflard8650 6 лет назад

hey ! it would be super entertaining to talk about weapon that looks weird or unpractical but who actually are really usefull and well made like the indian sword whip

@sparrow_solas 6 лет назад

Beautiful sword.

@OuroborosArmory 6 лет назад

Have you used the type 7? I prefer that pommel type, and for $100 less I was very happy with it, and it is quite durable (I put it through all kinds of hell) cut really well. I also had some nit picky issues with it, but for $250... it was a very nice sword.

@shuadubya5709 6 лет назад

I have the same one! Really impressed with it for the price. That whole collection seems legit.

@mastathrash5609 6 лет назад

Yes thank you for this review ! Do you think somebody with proper metal and wood working skills could perhaps tighten things up if it got loose?

@MrMetonicus 6 лет назад

And it will be back ordered before I have enough money to get one.

@aldor9357 6 лет назад

These new Ronin Euro swords are quite good actually Especially #3 which is basically a copy of Alexandria arsenal sword

@nagashizzar3978 6 лет назад

Aldor that is exactly what I was looking at! Looks just like the Albion but half the price and quality BUT I wanted to test that type of sword to see if I like the feel of the cut before I shell out all the cash for the Albion!

@aldor9357 6 лет назад

It's more like 1/3 of the price and the quality is not all that much worse especially for the price (1075 steel is perfectly fine for a sword)

@thatchannel195 6 лет назад

Oki

@0311matt 6 лет назад

i have the #3 and i agree. its no albion by any measure, and wish i had waited the few extra months and saved for the Alexandria. However, i do think if an albion just isn't an option it's not a bad sword for the price. i like it more than my Darkswords that cost more, but my Lockwood craps all over it... no where near high end... still not bad though.

@gorgonzolastan 6 лет назад

The Ronin Euro 10 is much as you describe here, except that the blade is in more of a saber or messer shape. unfortunately the handle construction makes it technically not a messer, combined with the lack of side rings or nagles and if that were different you would have a proper kriegsmesser in the sub 300 range. The pommel and handle construction are like you describe here without the bulge in the middle and the shape is an oval or rounded rectangle tapering down a bit to meet the pommel which is a good size and weight IMHO and is peened. So basically it is a well heat treated, good edge geometry, single edged, historically innacurate hand and a half or bastard... saber. But it's a fun one and a good cutter.

@corwinhyatt519 6 лет назад

So the Ronin Euro 10 is a falchion. Nice to know. (Specifically after looking at the sword a F5A+ based on the Elmslie Typology for medieval single edged swords, some fairly good visual references from Shadiversity's Shad Brooks: www.deviantart.com/shad-brooks/art/Elmslie-typology-sword-models-629295619 and www.deviantart.com/shad-brooks/art/Elmslie-Typology-of-single-edged-medieval-swords-629294615 )

@gorgonzolastan 6 лет назад

@@corwinhyatt519 well I wouldn't say that it has a definite correlation in a European historical bladed weapon however it's has cruciform hilt it's is a single edged weapon that is slightly curved and the hilt is constructed in such a way that it's not a Messer nor is it a proper saber if I understand what makes the proper saber because it is not for you specifically by one hand it could easily be a two hand sword or a hand than a half really you could you could label it either way depending on how you feel and how big your hands are so it very well could have been a European weapon but I just can't think of any that actually look like that, but it is fun none-the-less and I guess you could think of it as a big ass falchion. I mean somebody somewhere probably made something like this in European history but I haven't seen the equivalent of it in a museum or online looking through museums pictures of stuff Ronin Katana Two Handed Long Sword #10 as a second note though it wouldn't necessarily need to be a hand and a half or a two-hand because of its weight it just has a help that allows for that. It would be a little poorly balanced if it had regular saber Hilt like think of British military of the 1700s or something

@corwinhyatt519 6 лет назад

Looks like James G. Elmslie has only gotten his work published once (for an exhibit at a German museum) but if Shadiversity is up your alley Shad did an overview on it. Link to the playlist: ru-vid.com/group/PLWklwxMTl4szgOkBBVjaSJeqd25uHAnl4

@CapnPicard 6 лет назад

Nice looking sword.

@beckymurphy4714 6 лет назад

That...is a mighty-fine looking blade. The leather wrap does look a bit awkward; I was expecting it to be uncomfortable from the first view of that seam. Not that there's an actual front and back to a sword, but I would think you'd get a smoother seam on the wider section (a "back," if you will) than on a narrow side. Easier to get the material to line up and be flatter. Maybe I'm wrong; just seems like that'd make more sense. I do like how the tang is peened - it blends nicely with the pommel. Overall a very nice sword, from a completely aesthetic point.

@thelord8511 6 лет назад

Hey there Skallagrim. I just want to start off by saying I love your content. You have made me interested in materials arts with swords. I hope that things will go better for you with youtube and patreon and such, I really want to see your channel rise to the top. I was wondering if there maybe was any possibilities to look more into the weapons and fighting off a game called Warframe. Now, most of the weapons will probably be quite realistic, but I just would love to hear your thoughts of the games weapons and fighting styles with the different weapons, I think you might like it. I was also wondering if you could make more videos about greatswords. I have a huge interest in great swords for some reason and I was wondering if you could tell more about how to use them and their story, for I play DnD and I have a character who uses that and I like to describe my swings in a correct way. Thank you so much for making awesome content and videos, for giving me so much joy and happiness. I hope things are well, lots of praise from Norway, the land of the Vikings

@JustClaude13 23 дня назад

According to the reviews, the #2 as a great sword except for the pommel which cuts into the hand when swinging. One buyer cut his hand on the pommel like that. The Two Handed Long Sword #7 is cheaper, has 7mm-3mm distal taper and a friendlier pommel. it might be worth a look.

@jasonslone5307 2 года назад

this was my first longsword purchase... and I had a whole thing typed up here but it was too rambley. just buy it, I love mine to death. just a simple sword of solid construction, what more could you ask for at $350. (+ it comes with a scabbard and is work sharp out of the box)

@renoblevg5375 6 лет назад

Question that has probably been answered, but what do you think is the best quality sword for the money? Like your top 3 of double edged/single edged? Thanks skall, your videos are awesome

@PeskyGuy_ 6 лет назад

Thats pretty neat

@AFCAWorldBodybuildingArchive 6 лет назад

Lovely emphasizing of the *pommel* in the thumbnail 😍

@jeffreysnethen9586 2 года назад

decent build but the one I got today July 2022 was only sharp enough to cut butter right out of the box & had scratches all over the blade on both sides.

@knightedwolf 6 лет назад

could you show sometime how the sword belt of this sword works, have not seen one like that before

@oguzhantavus4237 6 лет назад

Actually quite narrow handguard compared to a longsword ( a zweihander) . they have to make wide and thick handguards that you can rely on without hesitation.

@Imakebootysclap 5 лет назад

just got the messer by ronin used but looking brand new for $150 Im stoked

@AppliedDefenseConceptsLLC 5 лет назад

How do you like it?

@Imakebootysclap 5 лет назад

@@AppliedDefenseConceptsLLC I love it, feels good in the hand, the scabbard is junk, more like a leather sheath but the sword is nice

@kieranlock3070 6 лет назад

Im getting one!

@Psycho-Ssnake 5 лет назад

Did you get it?

@AchippyEFFECT 3 года назад

Well??

@Neptune0404 6 лет назад

I believe their "Euro Model #1" sword might be more to your liking, at least when it comes to the handle. It still has the round section, but it looks to be a bit further down. However, the sword is also a bit bigger, and a bit heavier. I only found one review of it and it says that it's "a little too heavy" and it is only about 0,8 lb more than the model 2 sword. However, that could be enough to make it sluggish. I haven't tried it myself, I just thought id share my research.

@brumalogresteer4124 6 лет назад

One of the things that makes it a XVI is the diamond section.

@Psycho-Ssnake 5 лет назад

I've been eyeing this piece for a while now. Ordered it the other day. When I get it I'll let yall know my thoughts.

@nerodeadweightclaudius5422 4 года назад

Did... did you get it yet?

@schoolsout15 6 лет назад

I've actually considered looking into historical martial arts, mostly with an interest in viking and bronze-age fighting tactics. (If lessons on the latter even exist.) So if I do decide to look into swords down the road, nice to see there is an option out there that works for me. (Not sure I'll ever own an Albion, their just too beautiful in my eyes to risk screwing up.)

@billyheaning 3 года назад

Commenting on an old video, but I'm curious as to your opinions on the KoA (I think exclusive?) line of budget swords from Balaur Arms?

@0311matt 6 лет назад

i have a Euro #3 by Ronin. its a cool sword but the scabard is trash... i had to stab the sword into it repeatedly, until I carved out enough wood so it would fit. and the "leather" is pretty loose around the wood core. the sword took a little tip damage but nothing major. over all happy with the sword, its a work horse.

@primalwolfe4711 4 года назад

Looks like I found my next sword!

@realUlfricStormcloak 4 года назад

They used to thread their handles. They were selling the older ones for sub $200 in KOA years ago. I was going to buy but I slept on the purchase. Apparently when I finally placed my order I found out from KOA that someone had beaten me to the punch by 30 seconds. I had taken a piss prior to the purchase. 😐

@khandkersabahatrizvee8417 6 лет назад

this sword looks exactly like henrys sword from the kingdom come cover

@PopoXReturnz 5 лет назад

Very nice sword for the price. I just got mine. But did they have to ship it coated in wax IN the scabbard? How do you clean semi-soft wax out of a scabbard completely?

@Night-Jester 6 лет назад

Long swords are soo cool :) reminds me of my first and only long sword a CS Italian. The guard and scabbard LOOK the same but the pommel (insert end him rightly joke) and blade look different. I'm sure this is higher quality since my blade is floppy and the guard rattles. Anyways think this is my first comment (but I watch a lot). Later man.

@TheKiroshi 6 лет назад

Are you joking? I was literally looking at this exact same thing a month ago and decided against it, Just because of the sub $400USD pricepoint..

@aldor9357 6 лет назад

@mrcynical-9304 6 лет назад

@Anyarthropod 6 лет назад

@Quasihamster 6 лет назад

@shanesizemore3654 6 лет назад

Double F

@RandomizerYevhen 6 лет назад

This leads me to idea of DIY forge+sword materials pack.

@Roset595 6 лет назад

Oof. Skal just came clean that a less than shaving sharp blade is acceptable on a medieval battlefield.

@Skallagrim 6 лет назад

Of course it is. Might suck against thick fabric (gambeson or even sturdy winter clothing) though.

@EmiFolkMusic 6 лет назад

Could you make a video showing the fine details of a very well built modern sword? I'd be nice to see how good it can get with new technology. Specially because here in south america is almost imposible to get one :P

@ozoneharbinger923 6 лет назад

You need to do a video on Warhammmer 40k power weapons, storm shields and chain axes

@santanajackson6160 4 года назад

Im not a big fan of the european longsword but ronin makes some good blades I have the ronin dojo pro # 13 katana and I love it . its my favorite katana in my collection

@yoursexualizedgrandparents6929 6 лет назад

Thank you for showing pounds. I hate having to look it up every time.

@Sturdy_Penguin 6 лет назад

2.7k upvotes and only 3 downvotes? I don't think I've ever seen a like-to-dislike ratio that good before on a video with any substantial number of views. Impressive.

@JoeSteel1 3 года назад

I am hoping Ronin views your channel to redo the handle to adjust your concerns with the stitching and overall shape, shouldn't cost that much and would greatly improve the handling and make it stand out as an even more sound euro sword purchase...im foolishly waiting on that before I decide on this piece...they have changed and improved these models in the past