Rough Country 2-3" Lift Kit - LONG TERM REVIEW!!

Подписаться 309 тыс.

Просмотров 42 тыс.

50% 1

Rough Country 2-3" Lift Kit - LONG TERM REVIEW!! Here's A Long Term Review Of The ROUGH COUNTRY 2-3" Lift Kit!!
#RoughCountry #RoughCountryLiftKit #TorsionBarLift
In this video I give a long term review of the Rough Country 2-3" lift kit installed on my GMC Suburban GMT400. This lift kit is a torsion bar lift that's done 'right'. By 'right' I mean that they not only crank the torsion bars but they also compensate for that by lowering the front differential by 2" or so. This means that the CV axle shafts have a much better almost stock angle with the lift installed.
There are however a few downsides to a torsion bar lift and in this video I outline, as best I can, the issues I have with it. This lift is installed on my 1995 GMC Suburban which is also like the Chevrolet Suburban as well as GM full-size trucks like the Silverado and Sierra (Tahoe and Yukon too).
** I am an Amazon associate. I make a commission based on sales through my Amazon associate links.**
GoPro Hero 10 Black: amzn.to/3LKWvtg
This video was filmed on the GoPro Hero 10 Black in 5.3k and exported to 4k.
www.1roadgarage.com
**This channel is for entertainment purposes only! Do not do what I do. Do not take my advice. I am not a professional. The methods I use may be completely wrong and/or dangerous. Please seek professional help with anything and everything and do your own due diligence (research). Working on cars is extremely dangerous. I am not responsible for any loss of life or limb or property. DO YOUR OWN RESEARCH. THIS CHANNEL IS FOR ENTERTAINMENT PURPOSES ONLY!**
FTC Disclaimer: I am an Amazon associate. As such, I earn a percentage of sales made through Amazon associate links found in the description of my videos and on my website and other places.
00:00 Intro
00:40 Lift Kit Looks
01:45 Install and Fitment
04:30 Performance
11:43 End Result
13:32 Conclusion

Авто/Мото

Опубликовано:

10 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 257

@bryanhobson2991 2 года назад

I have a 1995 C3500 and love it. Your videos are absolutely setting the bar.......really high.

@JL-kz2ts 2 года назад

Thanks Jimmy! I have a 1999 Tahoe and everyone is telling me to lift it. Mine has low mileage and needed some general work done to it. Figured it smart to get the Tahoe 100% safe and reliable before I start messing with lifts (which I am almost at that point of deciding on a lift) and was looking at this Rough County lift but like you couldn't get over the torsion bars being used to lift the truck. I follow another guy on RU-vid and he brought up the same issue you addressed here with this kind of lift. Thanks for saving me the headache and hassle if I were to have gone down this road.

@josephdowney4919 2 года назад

Thanks for being truthful about this lift. I have been considering installing one on my 1996 K1500 for years now, but this video just convinced me not too. I think for me leaving it stock will be best. I’m excited to see more on those Kryptonite front end parts you got.

@geocerv5168 2 года назад

Thank you for being truthful in this video about this lift cause now I'm deciding to go with another lift just wish there where more reviews like yours about other lift kits.

@SFCRambo60 2 года назад

My 2001 GMC 3500 Dually for years looked like a wedge going down the street. The front end was always sitting on the bump stop, so my son and I cranked those bars and now the truck rides level and feels better. I have put 3 ton of wet sand in the 8 foot bed and didn't even hit the overload springs.

@extraziadeh 9 месяцев назад

Your first video and this one was the deciding factor on whether I got this kit or not. Thank you so much for making it. Saved me a bunch of headache

@Moose906 2 года назад

Thanks, I have been following all the why and have been waiting for this

@seans3766 Год назад

This has added to my research. Thank you for posting the "long term review"!

@farrispatton 2 года назад

Don’t get me started about those spacer tabs 🤦🏼‍♀️ I remember all of this. The phone calls and working on it and talking about it to me for days and days hahahah Love you babe! Great video.

@BillysWild 2 года назад

Thanks Jimmy! I watched your video on the install. I have a 96 K1500. I almost went out and bought the kit, but didn’t have a garage. Now I’m glad I didn’t.

@MrBowNaxe 2 года назад

Great job Jimmy! Honest, thoroughly tested review. Glad I didn't rush out to get one for my Suburban.

@1RoadGarage 2 года назад

I seriously considered a body lift only before this… now I’m wishing I went that route. Maybe I’ll still do that. 🤔

@GMT400Chevy 2 года назад

@@1RoadGarage Nothing wrong with a body lift, if you actually get the bumper relocation brackets, and brake line extensions.

@robertmoore4637 2 года назад

@@1RoadGarage body lifts suck a hole nother way! Way hillbilly bc all your wires are going to be stretched and strained. Lots of problems that will turn into a nightmare. Don't do it!

@stephenmckinley8855 2 года назад

I have this same lift kit on my wife's 1998 k1500 suburban and absolutely hate it. Rides like crap and eats front end part. I have been slowly collecting parts to do a SAS on leaf springs .Custom leaf packs from Off road design and it should ride pretty good . Pretty simple to do with a Ford dana 44 hp. Even able to retain abs with hummer h3 brake from THOR parts

@holdenc3082 9 месяцев назад

@@stephenmckinley8855 This is the proper way. SAS or just leave it stock. The torsion bar and A arm drop bracket kits are a hot mess as well.

@powerband5235 4 месяца назад

Have a RC lift kit on my 97 silverado 1500 for 7 years now and man it's worth every penny.

@karljansson7357 2 года назад

I did the same lift kit to my 1999 suburban a little bit after you posted your video of doing it. yeah i've had a hard time aligning mine also. I just had it aligned for the third time and it is still a little off. I've just decided that its good enough and im going to keep it how it is. Im really happy with the tires I have under it though. They are 33" Maxxis razrs MT. I would highly recommend them to anyone. I get insane amount of grip in all surfaces, even deep snow. Ive even crossed through a stream with them no problem. If I could do it all again though I would not do the lift and just trim the fenders a little bit to fit the tires.

@1RoadGarage 2 года назад

Good to know on the tires. I love the BFGoodrich so far but like to hear what everyone else is running.

@fixitdanner 2 года назад

Really appreciate your diligence and review, thank you

@1RoadGarage 2 года назад

Thank you

@normansmith205 2 года назад

You're completely right. I have a 92 1500 Silverado 4x2 ( springs inted but basically the same problem ) I had the exact same problem with down travel and alignment and when the wheel moves up the alignment changes really bad giving you an unsafe feeling ( probably it is ) all this issues are gone in my case when I add an extra cross member ( Rancho kit) . This holds the lower control arm giving it more space between both control arms and the right angle . Of course you will need a kit with longer links and probably in your case, spindles. The rear suspension is very easy to fix . Give it a chance before you take it off . One more thing , the kit will probably move the " offset" out (that happened in my case )and will look better in my opinion . And some spacers in the back :)

@thepricelife2374 Год назад

I have a very similar lift, I did the ebay one that are the same components. I don't have the same issues. I kept my stock shocks, I also kept the stock control arms. I used the keys from the lift. I have a good alignment, The front is exactly 1 inch lower than the back. Once you replace the control arms with the stock ones. Try keeping the RC keys and adjust them so the front is 1 inch lower than the back. I also switched to a coil over front shock. This allowed for less tension on the torsion bars. Did not need the shocks for the alignment to work. I hope it all works out. Let us know what happens after removing the RC control arms but leaving the RC keys. Keep'em coming, stay on the road!

@benkanobe7500 2 года назад

I have heard what you just honestly told us. Thank you. Where I live (and you use to) on the West Coast, costal, most trucks are 90% for looks and 10% for function. So, ........ RC sells lots and lots of kits and as far as your truck regarding looks, I give it a 10 (Ten). It really looks great and not stupid high. It looks factory and you always do a great job making things look like factory (lights, stereo, ......). I am glad you dumped the kit. Smart of you. My '96 K2500 Suburban looks higher than yours and I am not sure if it is due to factory size tires or if 3/4 tons just sit up more. I like the stock look of my truck. If it was higher it would be a pain for me at 65 years old to get in and out of. Your viewers really appreciate your honesty! Would factory 3/4 parts raise your truck and give you factory ride??

@jperrod1979 2 года назад

You're the man! I was considering doing a little 2-in lift to try to fit bigger tires under my 96 Yukon but I honestly I'm not a huge fan of the look... Because then you're basically forced to run an oversized tire, speedometers already way off, I'm not down for a much harsher ride and the inability to align properly. I remember when I had my Jeep TJ one guy called rough country rust country and told me that they were garbage. I'm guessing old man emu and stuff like that would be a better lift but I'm sure it would be substantially more expensive. The other thing I don't think I heard you mention is if you're dropping your front differential by 2 in to keep the axles at the proper angle then you technically are losing the ground clearance that you were trying to gain in the first place. You end up at the same spot with a harsh ride and a goofy look. Really appreciate you sharing your insight

@gera5470 2 года назад

Bro these videos are just great in every aspect! Keep the Obs content up man

@CollinZ71 Год назад

The reason the rear is lower in your case is because it’s a suburban. The rear half of your truck is MUCH heavier than your standard ext cab K1500 pickup. Like you said these are average/guesstimating measurements for different cab configurations. Glad to see you’re still working on this ole girl!

@johnfitzgerald5158 2 года назад

Hi Jimmy, A good diff drop will also relocate the lower control arms to a lower position. They will come with replacement lengthened knuckles to get correct geometry. Of course the price goes up with this. Also, to keep people straight on what you are talking about, those are "droop" stops, not bump stops. The bump stops cushion the upward travel.

@x-man5056 2 года назад

There are 2 reasons why the front lift is more than the back. 1. these vehicles almost always come from the factory with more height in the rear than the front and, 2. when off roading, since you have a fwd bias weight balance because of the engine, you potentially compress the front springs more when you hit a large bump or dip so you need a bit more suspension travel there. The front modestly higher is NOT an engineering problem with the lift kit. You can buy a larger block for the rear if desired, make sure you get appropriate U bolts with it.

@midnight-xpress1136 2 года назад

Excellent video and honest take on your lift kit. So many swoon when they drop some coin on upgrades. Enchanted by the hype, and the fact they paid for it so it must be a good purchase. Kind 9f like when I paid $1100 for a KW Varient 1 coil overs on my 1991 VW corrado. Everyone boasted these were the bee's knee's of suspension. While my handling was crisp, and my car did hug the road better. The ride was harsh, and not adjustable rebound. Honestly thought they are ok, maybe I should have dropped another $300 for the Varient 2, and got adjustable rebound. But honestly don't feel they were worth the $1100 price tag. Thumbs up on your honesty.

@owenbwitmer 9 месяцев назад

Everyone I know always chops off those bump stops for the control arms when they lift it- Obviously it was put there for a reason but in the 3 years I have had my listed truck I haven't experienced a single problem with chopping it off- actually I've noticed the opposite! As far as off roading it has given me so much more travel in the front. I don't know about your suburban but I'm my Silverado has another bump stop on the lower control arm which does a good job of still giving you some support. Appreciate the video though! There's a lot you hit on that I would have loved to know 3 years ago haha

@tyflesh 2 года назад

Back to the basics! As the feller said below I have 2000 k2500 and he replaced the stock keys with 2-3" lift keys and it rides horrible so I'm going to either crank the ones installed down or replace with the stock keys and crank those up some to get a smaller lift, the other owner also killed the shocks because he didn't use extenders and the front is bouncing all over the place!! Good luck with your project, I guess that's why we call them projects there never finished lol!!

@michealrobinson 2 года назад

Replace the steering knuckles with taller ones that relocate the the upper ball joint higher. That would take care of the front, giving you that upper suspension travel. As for the rear end sag, you can fix that with a taller 3 or 4 inch lift block or possibly adding lift shackles. That would correct the rear and raise it back where you want it.

@Stapleton42 2 года назад

Watching this trying to decide if I want to use this lift kit on our 1993 632 big block Suburban build...your burb is insanely clean

@izzate7 Год назад

It’s Mitchell!!

@arlindjax 2 года назад

Appreciate the honesty.

@ronjlwhite8058 2 года назад

Great review Jimmy.

@mateo32755 2 года назад

For the tire size you have (which I believe are LT26575R16?), stock height would be just fine. My brother's 95 k1500 Z71 came with that size of tire (even listed on the door jamb) and the few times we've ever run it in the desert or mountain trails it was a pretty capable stock vehicle. I myself have a leveling kit on my 2500HD that came with the truck when I bought it from my other brother, and just like you said, any bump on the road on the downward travel you can feel and hear it. I thought about putting it back to stock configuration, but my tire alignment is just right currently. Howdy from Rio Rancho NM!

@cpscps2679 2 года назад

That amount of lift is just right for that vehicle.

@pjammmo Год назад

The Freedom off-road upper control arms will work with the Rough Country kit and allow you to align the front end properly and give you more clearance between the upper control arm and the stop perch giving you more travel than the Moog control arms you installed.

@danaranstrom3396 Год назад

Dam I have a totally new outlook on lift kits now . I have a 95 k as well . Thank you 👍

@jaywhittemore5878 2 года назад

I think it looks perfect. Very usable & tires aren’t to big.

@boldlionpro2814 Месяц назад

I love this video ❤. Excellent review Sir. By what you said in totality, I think performance was a big deal for the project and the purchase was not the right one for the performance needs. Totally get it and I appreciate the honest feedback. I was going to be having it installed but I will prob do a lot of it myself. I don’t desire the performance of towing, rock crawling and such. My truck is a daily driver and may be used for hauling not so heavy stuff anyway. Thanks for taking the time to do the video. 👍🏼

@Deadpool-ODST Год назад

Good thing I watched this one. I was really thinking of getting the 2-3" kit from RC. I am definitely leaning more towards the 4" kit since it adds whole new mounts for the upper control arms.

@noahhunter4792 Год назад

Do it, spend the extra money, it’s worth the money to not have to fight with alignment issues and the ride quality

@philipburrows 2 года назад

Part of a suspension lift is that the lower control arm is replaced with a modified lower control arm to combat the excessive positive camber by giving a slightly more negative angle so when the lift happens your camber will be close to the factory spec of camber.

@jonmarshall9237 7 дней назад

Where can I get the modified lower control arm?

@johndenniss6224 2 года назад

I have the same lift, I upgraded my rear springs to 6 leaf and it made a big difference in the rear.

@BlairCalaway-jf8nj 7 месяцев назад

I don’t know who you are but you respectfully annihilated Rough Country.. lol. I love it, your truth and honesty. Yes they need to make a bracket like a shock extension but for the control arms in the opposite direction obviously.. and quit being cheap. Great Video - after this I said heck no and put the 285’s on my 16 x 10’s and called it good for this season at least 😂.. My 2DR is pulling strong here in Michigan - I love when the snow comes, we just had some this past weekend and my transfer case went out… 😊 I’m from Brooklyn New York this weather is different. Got home safe no issues! Great Video and please do some more of other projects! We’d love to see. Chevy Tahoe!!

@sergiochavira8 2 года назад

thanks really apreciated your time im happy didnt get one until i watch ur video looks nice but yep to hi on front and safty first u rigth 👍👊

@wyo1234 2 года назад

I have a 94 k1500, I did the 2 inch blocks and also used the Rc keys, I did about the minimum crank on the keys and got about an inch and 3/4 lift in the front. I think maybe if you just would have done the keys only in the front it would have been way easier and maybe closer to the results you wanted.

@jodysmith9551 2 года назад

I too will leave my 99 suburban stock. Thank you for the info

@kyledeherrera3661 2 года назад

I hate to bash on anyone's products, but I've had your same experience with RC. Put a 4" on my Toyota tundra, yeah that was not smart on part - but after three years,I did the same thing, pulled it off and put on a quality lift that returned my ride quality and didnt need an alignment every year.

@1RoadGarage 2 года назад

Interesting. Noted.

@Shotgunwilly1588 2 месяца назад

I actually love this kit because I actually put it on my 98 Tahoe.And it worked amazingly And all I did was just take it off-road a couple of times and to some trails and some off road sections near my home. The truck actually performed a lot better than a dead stock And I barely lost any fuel economy.I went with Falken wildpeak at3w LT265/75/r16 I can't wait to try this on my 1999 tahoe 4x4 I was actually really stupid for selling my last one On this next one i'm going to do a HT383E GM create engine with a 4L80E auto transmission Next time i'm using AT4W Falken wild peak

@JohnnyAFG81 2 года назад

A 4x4 mechanic told me rough country is the great value brand of suspension lifts. Does the job but don’t expect miracles.

@eugeniovillarrealjr8162 2 года назад

This will help alot of people in deciding if they want to buy this same set up or not.

@daltonmcgregor6990 2 года назад

I was very skeptical when I considered purchasing a “leveling kit” for my 1998 Chevrolet k1500 so I done quite a bit of research also. I ended up piecing together a leveling kit which included 2500 heavy duty extended swaybar end links, 1-3” adjustable torsion keys, and 1-3” freedom off-road upper control arms. I previously replaced the idler/pitman arm with MOOG replacement parts along with the original shocks on the truck with bilstein 4600 series with no shock extenders. After all the components were installed the torsion keys were only turned about half way up and the shop that aligned my truck had to remove a key/tab so they could align it properly. The truck handled and drove amazing especially since I had enough space between the upper control arm and the bump stop. I could easily clear a 285/75r16 maxxis m/t tire on a 16x9.5 billet specialty wheel or a 305/70r16 Toyo m/t tire on 16x8 weld wheel. I hope that maybe this info will help with someone looking to do something similar. Thanks for the great content that you’re able to distribute and help spread knowledge.

@grissom. Год назад

I’m considering getting the leveling kit for my 03. I’m currently running the bilstein 5100s and want to swap to 4600s because they are softer and will make it ride better. But the 4600s are for stock ride height trucks did you have any issues with that? Also mine is currently sitting on the bump stops, will that go away if I install the leveling kit

@jcnme 2 года назад

Your Suburban looks Great 👍 The lift is a 2. Excellent decision to take off the RC lift. Look into a "Pro-Comp" lift. I have had a 6" "Pro-Comp" on my 2005 Chevrolet Silverado HD 2500 Duramax Diesel 4x4 for over 360k miles now and I love it.

@1RoadGarage 2 года назад

Good to know! Thanks!

@BDGRanger 2 года назад

Look into replacing the upper control arm bushings with eccentric ones. I had the same alignment issues and swapping in eccentrics allowed me to get a proper alignment with the front end at a level height with the rear and retain a soft compliant ride because the bars were barely cranked. Solved all the issues you noted. May be worth a shot before you remove the lift. ACDelco and SPC both have options.

@1RoadGarage 2 года назад

I’m sure there’s something out there to help my alignment issues. I just find it much easier to return to factory and go from there.

@solowrider3356 2 года назад

Ive done a couple of those and back in those days i think back then it was skyjacker kits we did have to modify a lil but nothing too sucky ur truck is sweet still has that og look,, a nice polish would be cool

@Alligatorhunter4240 2 года назад

Have you thought about trying the suspension max adjustable keys? I had to use those on my 94 k1500 as other aftermarket lift keys just didn't have the adjustability I needed. My driver side naturally sits lower than the passenger side even after everything suspension and steering related was replacement. No alignment issues, and the ride isn't terrible.

@westwardbound8817 2 года назад

Dont blame you for removing it, those issues would drive me nuts!

@littlej3777 Год назад

Wow I have a headache listing to your problems and I just caught my breath at the end, woooooosh

@craigyarmulasr1845 2 года назад

Looks good. Look and see if you could get different upper control arms that have a different geometry in them.

@dylanmccabe8958 2 года назад

There’s a trick you can do you take that ball joint abs put it under the upper control arms and it helps with when you have the keys cranked up and keeps it from hitting the droop stops

@rjm7168 2 года назад

Lack of bottom travel has always been an issue with torsion key lifts. I wouldn't do it without also adding an upper control arm designed for this and then no more than 2 inches. I wouldn't like the front higher than the back either. I also don't care much for RC lifts, at least the older ones. Maybe they're different now.

@buddychildress785 2 года назад

My thoughts, (almost), exactly... I have an 05 Avalanche and my biggest concern is the torsion key lift will put a lot of stress on the factory ball joints. I have new upper and lower control arms with ball joints in them, but I'm afraid to wear them out prematurely. I know 6" lifts come with lower control are relocation brackets, but I don't want to lift that much. I like the look of the stock height, so I don't want to change it much. All I wanna do is level it without hurting anything.

@1RoadGarage 2 года назад

6 is pretty high. Don’t forget with heights like that there’s a whole bunch of extra modifications needed like longer brake lines, exhaust modifications, etc.

@vortecmacs 2 года назад

220,000 miles on leveling keys in my 2006 Silverado with add a leaf and a 1” taller block out back. Bilstein 5100’s. I was just thinking tonight how well it rides. 285/70/17’s and had 285/75/17’s before that. Don’t be afraid of lift keys. Just don’t over crank them, adjust to about a 2” lift and you’ll be fine. Your Avalanche should have the same suspension up front as me. Mind you I personally put 220,000 miles on this set up. It had this when I got it at 95,000 miles. Never changed the ball joints, control arms, nothing.

@jewllake 2 года назад

I thought that if you had a lot of positive camber it was b/c you had your torsion bars cranked too much and you had to lower them some. However, he is saying he had to crank them more? I'm confused.

@Seth_Michael_Hernandez Год назад

If you would do it all over again and still wanted just a couple inch’s to clear a narrow 33’s like a 285/75R16 without having to lift it 4” with a proper lift from RCX. Would you go with a 2” or a 1.5” body lift?

@jeremiahjohnson9908 2 года назад

I am wondering if tire sidewall height would compensate...in other words going from a 65 to say a 70 or 75 would increase the distance from the droop stop?

@anulfadventures 2 года назад

I have a '93 Burb. I have been torn. I wanted to put larger tires on of clearance but the thing rides like a Cadillac with the stock suspension. I watched your RC lift installation and right away the thought of cranking that torsion key rang alarm bells. It has to make the ride stiffer. So I'm still in a quandary. Will 35"s fit under the wheel wells without a lift? The rear suspension really needs blocks or something but what about the front?

@rangerismine 7 месяцев назад

I used lift keys and Kryptonite upper control arms on my silverado 2500hd. No issues after 50,000 miles.

@upnorth1321 2 года назад

You wouldn't gain travel but to soften you can take tx-bar out drop lower arm and replace bar and tighten it won't take as much and will loosen some tightness

@Mr69abody 2 года назад

I think it's been said. How about keeping the keys and just reinstalling the factory upper control arms? Arguably it's one of the easier things to do, so start there.

@funchfries 2 года назад

I have the same lift on my 94 GMC Sierra. I have had none of the issues you've had. No alignment issues, I'm not maxed out on my torsion keys either. Not sure where the difference is between our two lifts though, I did have to replace my tie rods at install as well however...

@1RoadGarage 2 года назад

Interesting. 👍

@benburrage4200 2 года назад

Same. I have a 97 K1500, and had none of those issues. I did install heavier duty torsion bars, Bilstein 5100s, and upgraded camber bolt kit with more adjustment. My truck rides great!

@funchfries 2 года назад

@@1RoadGarage I will say the shocks aren't fantastic, but my oem Bilsteins were actually worse, so I can't say either way on that count

@DJ63phx 2 года назад

I have to ask you did you measure it before you added the lift to it? You might have tightened up the torsion bars too much and overexceeded the 3" lift

@bricegraham8256 2 года назад

I really want one of those trucks

@boldlionpro2814 28 дней назад

Can an additional 1inch block be added on and sandwiched in the rear where the spring block goes? I’m looking to get one more inch from the rear

@tiledave621 2 года назад

I would rather have the front end up higher. So you don't nose dive into those mud holes. I would also never use blocks in the rear, because I like wheel travel. I'd get new springs. Now, it's a damn shame you have to go through this crap. I would find a way to get that diff back up. Or find another lift. I just picked up a 98 Suburban 2500. I think I'll leave the height where it is, for now. Just replace the Bilstein shocks. It sits pretty high. Thanks for all your videos I watched them all.

@Davis.Official 2 года назад

I'd say a solid 8.5 an that's me being conservative .. I like it bro bro

@BobArthurGroup Месяц назад

Hi Jimmy, Have you looked into changing out the rear leaf springs or front torsion bars on your suburbans? I’m looking at changing my front torsion bars on my 1993 K1500 four-wheel-drive suburban. Was trying to find someone who’s done this already and see what weight rating torsion bars they went with.

@chriswinkler8231 2 года назад

Wonder if this is more of an issue with the suburban… @autoedits has a similar style of lift and 35’s but loves it. Y’all need to do a Q and A video together.

@willypicon336 2 года назад

There are several companies that make upper control arms Kryptonite being the only one I can remember right now they have a curve in them that gives you a lot more down travel and some of the companies even make him a justable so you can move the ball joint back and forth and be able to align it at any height maybe it helps thank you

@benjaminchavez6786 2 года назад

Kryptonite will be dropping suspension leveling and lifts soon! hopefully you will consider!

@bobreighnheart5071 2 года назад

IF you replace those Bilsteis shocks with KYB shocks your ride will improve so much

@kmrjeep 2 года назад

Just crank the stock keys it doesn't take much to level it out I had plenty more to go on mine if you have to use other keys to get any amount of lift that just tells you the bars are already worn out and weak to begin with and by the time you crank the crap out of them there going to be stiff as a board. I used to run a 34" equivalent tire for awhile now running 33x11 for the past 4yrs no issues I rebuilt the whole front end prior to the crank truck has over 350k on it the only complaint I've ever had was my alignment shop not setting my camber to 0 degrees because they wanted to go factory specs. I have debated dropping the front diff but after the years I have been running it I still haven't rubbed any holes in the cv boots the angles are pretty decent and truck still drives and rides like normal. I helped a buddy put the RC kit on his and he got greedy he ditched the 2" rear block and added a 4" block and maxed out the front even though I told him he would hate it he went that route yeah it jacked it up but rode terrible no down travel and was tearing up cv axles drove like crap.

@dmitriyplaksin5272 2 года назад

will be interesting to see stock front+ lifted rear. Maybe new torsion bars will help?

@jonathoncupp7021 2 года назад

What happen if you swap the 2 in block in the rear to a 1 inch lift shackle or a block 1 inch lift

@benmucha7099 2 года назад

Badass from how it use to look. 😄9-10

@charliewaters7752 19 дней назад

Thanks, Jimmy! You saved me a lot of time and frustration. I was planning on installing this same lift on my '94 Chevy Suburban. But, not anymore. I am shooting for more function than fashion. 'Cause damn, they bulit these beast with comfort in mind. Big Blue is smooth as hell on the highway. Anyways, any suggestions on good 2-3 inch lifts for 8th gen Suburbans, guys? Not new to turning a wrench but definitely new to lifts. Cheers.

@diegomarquez9523 2 года назад

I have that same lift for my 92 Sierra and I didn’t have to crank the keys. Mine drives better than before because the stock keys were cranked up and rode bad.

@kristopherisbell2694 Год назад

Where did you get your Red Tow Hooks? I own a 94 2Door Yukon and im about to install exact lift !

@natanaelrayon827 2 года назад

Jimmy, get the dedicated upper control arms for a 2-4 inch kit that will solve the problem of angle of the upper control arm tbat yiu have right now

@chefbeefsalsa2938 2 года назад

I have a 2 in drop spindles on my GMC Sierra c1500 97 and I’m planning on adding a 2-3 in lift by rough country but my problem is I can’t find oem stock height spindles anywhere! They’re all dropped spindle’s and there’s lift spindles but they’re a 4 inch lift which I’m not wanting. Is it possible I can just add the 2-3 inch lift with keeping the 2 in drop spindles? I’m just trying to get the stock height back or kinda how the obs Chevy z71s looked. I like how they’re a little bit higher than the regular obs.

@matt_queso 2 года назад

As a guy who has been considering this exact lift for a few weeks (and watching your other videos about it in the process) I can't thank you enough for this long term review. I'm definitely not going to go this route now.

@mrbrown7912 2 года назад

Hello I like your videos they are very helpful and cool. Also i have a 99 yukon and I need some assistance. I put l.e.d bulbs in my rear lights and they are partially working. Is that because of low voltage??

@humpygames1199 11 месяцев назад

Did this vehicle have the 2-3” lift control arms or the stock control arms?

@duane4972 2 года назад

Have you thought about doing a SAS ( straight axle swap) ? This might be a good time to do it, before investing in new ball joints and the rest.

@1RoadGarage 2 года назад

Yes. To do it right, it’s expensive!

@GoldenLink87 2 года назад

Yes the SAS swap parts and labor looking at 10-15K

@photog1529 2 года назад

I have the same lift kit on my '95 Chevy K1500. I'll have to take a closer look at the bump stops. It does have a harsher ride, but I attribute that to the stiffness of the suspension and the crappy RC shocks. I plan to install a pair of Bilsteins (unsure of 4600 or 5100) right after I build a new rear bumper with a swing-arm spare tire carrier. I recently made a round-tripper from Texas to Joshua Tree and back without any noticeable problems (except for the gas mileage :-) ) EDIT: I checked my bump stops with the vehicle at rest in my driveway...I can pass my fingers through the gap between the bump stop and control arm. Don't know how this compares to yours.

@ctusser 13 дней назад

What size tires did you put on the stock wheels? Glad I watched the video, I’ve been eying a RC lift for my 96 Silverado, now I think I’ll pass.

@johnhow3624 2 года назад

Jimmy get some "old man emu " suspension it's from Australia really good stuff you might pay more but you won't get all the trouble the cheaper ones give you. Let me know what you think of it

@BDKennels 2 года назад

Yikes. Talk about timing. I was maybe a week away from ordering this very kit for my 98 Tahoe. Now I think I'll just go with a front end rebuild and bilstiens. Thanks!

@TheJmatagi 2 года назад

Interesting I lifted my 2015 suburban front end 1.5” and I can’t feel a difference in my suspension on or off road. The lift essentially is just a spacer you add to the struts. I am now interested in looking at what happens at full drupe and see what the limiting factor is.

@TheJmatagi 2 года назад

I also got an alignment after and didn’t have any issues.

@marioespinoza9025 2 года назад

I had seen a video were you replace the ac controls. I have the same issue. Where did you buy yours? Please let me know thank you.

@1RoadGarage 2 года назад

I think I bought on Amazon. Can’t remember if they’re ACDelco or another aftermarket brand, I think it’s in the video though. Expensive though and I’ve already had to take it apart twice and clean the electrical connections… 🤦‍♂️

@marioespinoza9025 2 года назад

@@1RoadGarage thanks for the response. I’ve already bought 2 different ones. One was a doorman and the other I don’t remember and both didn’t work. I’ll check out the video again. Keep up the good work. Love the truck. I have a 99 Chevy suburban. :)

@lindahamilton8877 2 года назад

10. ... Looks great...you are so interesting

@donclark8264 2 года назад

The upper control arms from Rc must be designed for more than 2” lift if u had to crank torsion keys all the way to get it to align

@69mustang 2 года назад

From my experience these kind of lift is only good for 2 inches approximately. Yours is WAY over cranked. My ride was awful when I crancked the keys. I fine tune it to be perfect. My key bolts are out almost completely they move up the keys up like 1/4 of an inch or less. One thing to keep on mind; half a turn on those key bolts makes a WORLD of difference when is set up as I mention above. My vehicle is a1995 2 door Tahoe with only the upper Rough Country control arms and the tortion keys. I did not lower the front diff. The alignment shop didn't have any problems with my set up and it drives great. Forgot to mention I I installed BILSTEIN 5100 shocks. 33 Mud Grapplers on factory wheels, no rubbing.

@1RoadGarage 2 года назад

Interesting, yes, with those keys a little goes a long way for sure. The problem is any lower and there’s too much uncorrectable positive camber. The last alignment the guys were literally tightening the key bolts just to get it right.

@vortecmacs 2 года назад

@@1RoadGarage I wonder what the results would be with your stock control arms installed.

@69mustang 2 года назад

@@1RoadGarage Where can I send you some pictures and more info about my set up? I've been playing with the front end for a while now and at last it has a comfortable and stable front end.

@isacmorales9688 2 года назад

Big fan of the channel I have 95 burb myself. I have a question though. You bought and installed billstein 4600s when the truck was at stock height. How is it that those same shocks still fit with the 2-3 inch lift ? I thought if the truck had a lift you had to use different shocks specifically for that lift ?

@12483MG 2 года назад

I purchased new torsion keys and the kit came with shock extenders. So 4600's will work. They'll work without them as well but with a rather rough ride due to less rebound.

@yomamasmaggot 2 года назад

You should send rough country links to your install and review videos and see if they will do something to correct these issues or atleast make them aware of these issues.

@operator8014 2 года назад

Every Suburban that hasn't been thugged out starts at an 8/10 for me. A mild lift like this makes it a definite 10/10. A 6th gen Suburban starts out at 11/10.