No video :(

Router Bit Not Fitting Into Your Router? - Common Beginner Mistake

Подписаться 348 тыс.

Просмотров 106 тыс.

50% 1

Router bit not fitting into your new router? Generally if your router bit is not fitting into your new router it's because of two things. First, it may be because of a sizing issue, and second it may be because your router has a self-extracting collet. In this quick video we will look at that those problems and find the solutions.
Handheld Routers Course: bit.ly/3DcIeE3
0:00 Intro
0:19 First Problem - Sizing
0:56 Second Problem - Collet Not Loose
3:31 Third Problem - Dirty Bits & Collet
4:30 Online Routers Course
4:45 Outro
Affiliate links to tools and products I like and use (THANK YOU for supporting THA!)
----------------------------------------------------------------------------------------------------
Tool Cleaner: amzn.to/3sQ0E4B
HAND TOOLS:
Trend Router Pod : amzn.to/3ubKbbS
Trend 200mm Digital Angle Rule: amzn.to/2PD9btH
Combination Square: amzn.to/2X79Cgb
Kreg Jig: amzn.to/2KLPvxY
Speed Square: amzn.to/31fv02z
End Cutting Pliers (they don't sell mine anymore): amzn.to/31hq1yt
Estwing Hammer: amzn.to/2VVnHMr
Chisel Set: amzn.to/2BjHH1H
Nail Set: amzn.to/2BdxCU4
Pry Bar Scraper (better then mine): amzn.to/2oGhKXu
Tape Measure: amzn.to/32gdEUt
15-Inch Utility Pry Bar: amzn.to/2IPlHQs
Level Set: amzn.to/33C56rD
STARBOND CA GLUES: bit.ly/3h0wWUz
POWER TOOLS:
Drill Combo Set: amzn.to/2nDsqFV
Jigsaw: amzn.to/2AGpGua
Porter Cable Belt Sander: amzn.to/38D3kJe
Circular Saw: amzn.to/2Pvto2C
D-Handle Router: amzn.to/2ol4mYx
Small Router: amzn.to/2nEjDUe
Plunge Router: amzn.to/2LK29yQ
----------------------------------------------------
Follow/Contact Me:
INSTAGRAM: / traininghandsacademy
FACEBOOK : / traininghandsacademy
EMAIL: josh@traininghandsacademy.com
---------------------------------------------------
My name is Josh Fedorka, and I’m the founder of Training Hands Academy™. I have been a carpenter and woodworker for over 25 years. I have also held certifications in home energy auditing and have built several LEED certified homes in New England.
God has gifted me with many “hands on” skills and it is my calling and purpose to share those skills by teaching others. Whether it is to seek a career in carpentry, become a general contractor or improve one’s DIY skills and knowledge, the motivation behind THA is to help others successfully learn how to work with their hands.
#traininghandsacademy #woodrouter #beginner

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 145

@TrainingHandsAcademy Год назад

*My NEW Beginner Handheld Router Course: **bit.ly/3DcIeE3*

@josephaukeman6399 6 месяцев назад

Thanks for this video. I had a bit stuck in my milwaukee self extracting, and while other people/videos said to turn it further it was so tight I didn't want to turn it that hard. Yours actually showed more about how it works with a similar router and gave me the confidence to turn it harder and completely remove the collet and unsieze the bit. Cheers.

@ericconvey 2 года назад

This video is amazing. I'm not the sharpest tool in the workshop, but usually can figure things out and was mystified to the point of doing a ton of unsuccessful research to solve the problem you addressed. Thank you!

@TrainingHandsAcademy 2 года назад

My pleasure Eric!

@ericarmstrong264 Год назад

Hah! Figured it out! So I have an addition to your video! You give a really helpful explanation of self-extracting collets & how they need to be loosened. BUT... I have a brand new Makita that's supposed to accept 1/4" bits. The collet nut is completely off. (Can't get any looser than that.) But the 1/4" bit I've been using in my Ryobi just does not want to go. It doesn't stop partway in. It just never gets started. The collet seems frozen in place! I finally recalled that I had the same problem with my first plunge router. The solution was to pull the collet out entirely, so it's free to expand. A thin rim of the black Makita collet shows above the silver aluminum shaft. It didn't budge by hand in the new router, so it appeared to be welded in. But put the small wrench on the shaft, grab the rim with a pair of pliers, and give it a little twist to loosen it. Then you can pull it straight out, put the bit through it, and then put everything back on the router. (Hopefully, this small addition makes it into a future edition of the video. It's the least I can do for by way of thanks. :__)

@tonyc7352 3 года назад

I've have viewed a few of your videos and I like them. Don't stop making nice short-to-the-point ones instead of so many of these over 10 min. ones that are just padded out. Thank you.

@TrainingHandsAcademy 3 года назад

Thanks, will do!

@bujoun76 2 года назад

Those extra turns totally helped. Thank you!

@jbb5470 3 года назад

Great video and content! Very useful and timely, I using my router more these last few days with more to come. Thank you for posting!!

@TrainingHandsAcademy 3 года назад

You're very welcome!

@kirkwilliams5740 3 года назад

Thanks for sharing this video with us, good teaching.

@Hashimo 3 года назад

Thanks for saving my day!! I just tested my new TRA001 and tought I messed up and ended up with a stuck router bit. Couldn't find a video actually showing how to get the bit out.

@WillieBeW3 Год назад

Literally just had this issue with my router (first router I've purchased and used). As I was watching your video I pulled out the collet and the bit fit, the nut as you stated was not as loose as I thought. Thank you for the upload!

@TrainingHandsAcademy Год назад

Glad it helped!

@70mujtaba 3 года назад

I watched the whole list thank you for you valuable info

@grenadier6161 Год назад

thanks for the information ,was having trouble getting my router bit in ,till i found out the locking nut was done up with no bit in place ,damaging the colllet ,sorted good video thanks

@RenatoBriones 3 года назад

Just happened to me with my first trim router today. Thanks!!!

@chumn54 2 года назад

Well explained. Thanks

@darinjohnson3671 2 года назад

Thanks for this one little tip was trying to figure out how to put the bit in and thought it was the wrong size. I have not used a router before and just purchased a Milwaukee Router and thought all my old bits did not work and the new one I just bought as well. Thanks a million :-)

@TrainingHandsAcademy 2 года назад

Glad to help!

@morriskuria6595 3 года назад

Great video🙏been waiting for that mate. Jolly good show. Cheers. From Kiambu, Kenya.

@TrainingHandsAcademy 3 года назад

Glad you enjoyed it Morris! Cheers!

@neighborfamily9745 3 года назад

Thank you sooooo much for these beginner videos!!

@TrainingHandsAcademy 3 года назад

You are welcome!

@dannymeil3294 Год назад

Great information to save time and frustration.

@kathrynnewton8721 2 года назад

So helpful, I recently returned some router bits I bought for my new trim router because they wouldn’t go in! Although others did?

@abcslidingdoors2494 Год назад

just bought a used shaper origin and the bit was stuck. luckily after my initial panic I found your video. Thank you friend!!

@TrainingHandsAcademy Год назад

Excellent!

@stansbruv3169 2 года назад

Thank you! This beginner stuff is right where I am.

@TrainingHandsAcademy 2 года назад

Let me know if you have any other questions Stans.

@rammalla6176 2 года назад

Thanks for sharing your experience tips

@TrainingHandsAcademy 2 года назад

My pleasure

@stebbarry9395 Год назад

Thanks for the video. You've got some good tips. I only wish they applied to me. I purchased a 6 amp trim router from the WEN company along with one of their router bits. The bit does not fit into the router even with the collet nut completely removed. Looking into the collet it seems clear to me that it is less than a quarter inch diameter. I've contacted them via email to see if they can do anything about this. I have yet to hear back. At least I can rule out some of the possible issues thanks to your video. I do appreciate it! Keep up the good work.

@TrainingHandsAcademy Год назад

Thanks for the comment. Hope they resolve your issue.

@windycitysawdust 5 месяцев назад

Helped so much, TY!

@TrainingHandsAcademy 5 месяцев назад

I'm so glad! If you like my style of teaching you might also really like my beginner online router course. Check it out here if you want. bit.ly/3DcIeE3

@leetomlee7265 2 года назад

Thanks for sharing. I have hard time getting bit size for the shank of my router.

@TrainingHandsAcademy 2 года назад

You in the USA?

@justind9858 3 года назад

You're excellent bro

@GentlemanH Год назад

It is worth mentioning about the metric and inch ways of measuring the shank. Metric will be 6,0mm diameter and inch will be 6.4 mm diameter bit shanks and it is important to use the correct collet size.

@specialgamer2567 2 года назад

Helo sir good day! I just bought a new bosch gkf 550 router trimmer and its says that the shank is 1/4 or 6mm then i saw a brand Harden router bit the shank is 1/4 universal router bit but when i double check the specifications of the router bit the shank is 6.35mm my question is does it fit to the collet nut of the bosch gkf 550 with a 1/4 shank or 6mm

@josealejandromartinezlopez3924 2 года назад

Great video. I do think you miss to explain that even is you have a 1/4 bit shaft but its a very width one, it wont fit a 1/4 palm router because of the base!. A palm router have a narrow base that prevents from using a width bit. Learn from my mistake.

@dominicsianot2470 11 месяцев назад

That was informative!

@TrainingHandsAcademy 11 месяцев назад

Glad it was helpful!

@mkteku Год назад

Which small trim-router (Bosch, DeWalt, Makita) has reliable aftermarket nut/collets that can accept all sizes? (6mm, 8mm, 1/4in and possibly 1/2in, but the 1/2in would be a bonus, mostly the first 3 sizes.) Cheers, thanks.

@ishtlutz1261 2 года назад

Thanx Dude.

@andre1987eph 2 года назад

Excellent info. I shared it (to myself)

@TrainingHandsAcademy 2 года назад

LOL

@diyretiredmom Год назад

I just discovered your videos as I am going to purchase a palm router. I must say you are a great teacher and I love them. What does it mean though when the Palm router says accepts bits up to 1 5/16" wide! Does that mean you can add a bit into it or put a bit in the collet that is up to 1 5/16 in wide? Thanks so much.

@TrainingHandsAcademy Год назад

That most likely means that you can use a 1 5/16" diameter bit (not the shank size) in the router before it touches the base. If you're interested, I do have a beginners hand-held routers course coming out soon. If you want to be notified when it launches check out this link --> bit.ly/2I8vT9k

@AKhan-nu9mw Год назад

very informative

@TrainingHandsAcademy Год назад

Glad you think so!

@diashennaduramuthu412 2 месяца назад

Very helpful thanks God bless you to

@TrainingHandsAcademy 2 месяца назад

Thank you for the blessing.

@davidevans533 3 месяца назад

Great tutorial, one new subscriber added 😊

@TrainingHandsAcademy 3 месяца назад

Thank you!

@jenniferwalden3029 Год назад

I took the nut all the way off. The collet seemed smaller than 1/4". (I tested it with a 1/4" drill bit.) I was at my wits' end but I tried sanding the shank of the router bit and forcing it in (with gloves). Tapping it with the wrench after that actually got it in.

@j0mbie 11 месяцев назад

Great information, but there's also a rare additional issue that can come up. Even with my collet nut completely removed, I still couldn't get any of my bits into my router recently. I was positive they were the right size, especially since I had used the same bits somewhat recently and I never used a different collet on that router. But also, I noticed the collet "shaft" (the part that squeezes together to hold the bits) seemed to be stuck as well. I had to use a pair of pliers to get it out, and it fell apart into 4 pieces when it came out. It seemed like it seized in the shaft somehow. Anyways, new collet, no issues. I didn't see any rust on anything. But I'll be storing my collet detached from my router going forward, just to make sure it doesn't seize in place again. And give it a good blowout with compressed air after removing for good measure. Oh and, I found out that you're not supposed to tighten the collet completely if there's no bit in it. This probably contributed to the destruction of my collet! Live and learn I guess. I just didn't want to risk it falling off during any possible transportation. I'll just get a small pouch for my collets and router wrenches going forward.

@TrainingHandsAcademy 11 месяцев назад

Great info, thanks for sharing.

@Firojfurniture5544 Год назад

Nice information

@TrainingHandsAcademy Год назад

Thanks

@cindyhowell840 2 года назад

Thanks for the video. My problem is that I put the bit into the collet, adjusted it an eighth of an inch so it didn't bottom out. All seemed fine until I got to a section of wood and the bit stuck, then loosened and came right through the wood. I checked it again and tightened it well, but again, the bit popped out of the collet and fell to the floor, while the router was on. (yikes). It was a 1/4 inch bit with the bit adapter to fit. Is there something that I need to do differently. Thanks for your help.

@TrainingHandsAcademy 2 года назад

Hello Cindy! Lets see if we can figure this out. What is the bit adapter, and why do you need that?

@fireworxz 2 года назад

Thanks

@gregsewell4259 Год назад

Is there an interchangeable collet for the mini cordless DeWalt DCW600B that will allow for it to convert from 1/4" bits to 1/2" bits?

@TrainingHandsAcademy Год назад

Not that I'm aware of...

@kenspaceman3938 2 года назад

Can you use a router bit with a metric 6,00 millimeter shank in a router collet designed for the imperial 1/4 inch shank size?

@TrainingHandsAcademy 2 года назад

No, I do not recommend that.

@kathrynnewton8721 2 года назад

Thank you, I had a problem with my new Bosch trim router. 1/4” bits but it didn’t go in deep enough and flew out of the collet ( very dangerous I know! ) I returned them but have had no feedback……however a different brand fitted perfectly?

@zarecarina Год назад

I have also purchased a Bosch GKF550 and can't fit a 1/4 bit, what was your solution?

@kathrynnewton8721 Год назад

@@zarecarina I sent it back to the supplier and got a refund, but never any feedback. Another brand fitted perfectly, apparently there is a fraction of difference in the sizes, especially when converted to metric!

@waitef4u Год назад

Best one yet my bit is dirty thank,s

@Mikael1948 2 года назад

Thankyou,

@JanineMKartist 2 года назад

I thought my dewalt 2 1/4 was supposed to come with two collet nuts for each size. I got one with the 1/4 inch insert. Can I use 1/2 inch bits in that if I take out the insert or am I missing a part? I don’t think I got the right answer from Home Depot . I have yet to buy bits so I don’t know if I’ll use 1/2 inch but I don’t know . Am I missing a part since I only got one collet nut with the 1/4 inch in my kit? I got the kit with both the fixed base and plunge .

@TrainingHandsAcademy 2 года назад

Hey Janine. Make sure that the 1/2 collet is not already installed in the router. I've also read that a few people who bought that kit were missing a collet as well.

@davidmichael5311 2 года назад

I bought a new Skil Router last year. It was a display model at Lowe's. They did not have the box or the other contents of the "new" box. I contacted Skil, and they sent me all the other items that come, new, in the box. But, instead of sending me the 1/2" to 1/4" collet reducer, they sent me an additional 1/2" collet. Are collet reducers universal? Will any 1/2" to 1/4" collet reducer fit in any brand router?

@TrainingHandsAcademy 2 года назад

No not all collets are the same. Normally they will send two separate collets, one 1/4" and one 1/2"

@joseguevara184 2 года назад

This is me you are talking about jeje. I received 1/8 bits and no way to use them. Should I get an adapter or one of those triangular shape collets?

@TrainingHandsAcademy 2 года назад

I would just buy the correct collet.

@georgegrant033 3 года назад

Where can I get the the bigger 12.7

@Jared7873 2 года назад

Thanks! I couldn't figure out why I couldn't get the bit in. Although this video was helpful, the problem was there was a disposable (or removable?) rubber sleeve around the shaft of the bit it came with! Duh.

@TrainingHandsAcademy 2 года назад

Hey, at least you got it figured out. Now go make some sawdust! :)

@juanpablobiz Год назад

Hi do You think it is nesessary to release the router bit, when the router is not in use? Because i always leave them in the router until I need to use another kind of bit. Thanks

@TrainingHandsAcademy Год назад

Hello Juan! No, that will not hurt the router or the bit. If you like my style of teaching and you want to learn more about routers, I do have a beginners online course. bit.ly/3DcIeE3

@juanpablobiz Год назад

@@TrainingHandsAcademy 👍 thank you very much

@iwannaapple7190 2 года назад

I have a Bosch router and a Makita router. Both except 1/4 inch bits. However, what will fit into the Bosch will not fit the Makita because the router base of the Makita has too small of a hole for the bit to go through. What do you do about that?

@TrainingHandsAcademy 2 года назад

You should be able to get a different base for that router. Send me photos on IG if you need more help. :)

@iwannaapple7190 2 года назад

@@TrainingHandsAcademy I don't know what IG is? I have the 701 but I'm sure its probably the same diameter hole in the one you was using your video. It looks exactly the same except I don't have a battery on top. I put a round over bit in it, I didn't notice, but I started it up and thankfully it has a soft start but it turned out the diameter of the round over bit was slightly too large to fit through the hole in the base. It does fit in the bosh colt. if you have a link for something helpful would be great.

@KpxUrz5745 3 месяца назад

Very good video with useful information. However, believe it or not, nothing in this list of fixes solved my problem. My router is an older Porter Cable. It doesn't get tremendous amounts of use, but has always been excellent. Lately I've notice a 1/4" bit may take some force or tapping to get it in before tightening. Then the real problem is extracting the bit later. I have to resort to all sorts of tapping and prying, trying to be as careful as possible with the carbide edges. The router bits are clean and have no residue on the shafts. I just tried cleaner on paper towel wrapped around a thin stick to clean inside the collet. This did not help. I can use the router, I just would like the bits to slide in or out normally, without the difficulties. I even wonder if anyone ever recommends some tapping with a screwdriver or something placed into the open slot of the collet, as if to perhaps expand it open a tiny bit.

@TrainingHandsAcademy 3 месяца назад

I talk more about these fixes in my router course, but yes, you can tap on the shank (you have to be careful with that, but it works). I've also used fine sandpaper on the collet, shanks of the bits, and inside the shaft of the router itself. It can also be from over tightening the bit in the collet. However, some older routers/collets do get worse over time... I'm not sure why maybe because of poor milling at the factor. I'm sorry this is happening to you because I know how frustrating that can be.

@GuitarsAndSynths 2 года назад

Great video. Be careful with router bits and use gloves handle them. I sliced open my finger on a sharp one! My router came with 1/2 inch and 1/4 inch collet make easy to use wide range. How far down should the bit fit into the collett?

@TrainingHandsAcademy 2 года назад

Bottom it out, and then bring it back out about a 1/4"

@derrickknight4985 2 года назад

Just bought a Dewalt 18v router 1/4” Collette, but 1/4”router bits are to small as the Collette won’t tighten up. Collette opening looks to be about 8mm?

@TrainingHandsAcademy 2 года назад

Are you in the USA?

@derrickknight4985 2 года назад

@@TrainingHandsAcademy Hi. No I’m in the UK, but I have just found a smaller Collette that came with the router. Didn’t check inside the bag of bits that came with it…. So all is good now.

@red2965 2 года назад

Still looking for someone who can tell me if or where I can get the collet's (all except 1/4). Yes it can handle a 1/2" shank, I just don't have a collett. Sorry of if I've asked this before and forgot your answer. Sorry I forgot to mention that it's a Ingersoll-Rand

@TrainingHandsAcademy 2 года назад

Do you have a model number?

@g.o.3623 2 года назад

Hi. My router is 6.35 and i bought 6.00 mm bit. Will it work or is it dangerous to try ? Rgds

@TrainingHandsAcademy 2 года назад

Is that your routers factor 6mm collet? I would double check with the manufacture of the router to see what bits fit into that collet.

@joseluisruiz3789 Год назад

Hello, I'm attending your router class online and was wondering if you know if there are some Rourer bits that won't sit flush with the Jessem Rout R Lift II router plate? I have some router bits from a company called Mobile Solutions which focuses on Car Audio, I have a bit that is 1/4" and won't sit completely flushed with my Dewalt DW618 router and the Jessem Rout R Lift plate. I had a Cheap husky portable router table using the Included adjustable base from the dewalt router and I was able to drop the router low enough underneath the table where thw router bit was not visible. But with the jessem router table I got including the Rout R Lift II plate, I can't seem to get the bit to go under the plate. It sticks out by like 1/2 an inch with the little wheel bearings showing. Could I have installed my router wrong on the Rout R Lift II? 🤔🧐

@TrainingHandsAcademy Год назад

Hello! That's what I'm thinking... the lift needs to be adjusted or re-installed. I hope you are enjoying the course. Let me know what you find out.

@joseluisruiz3789 Год назад

@Training Hands Academy I am absolutely enjoying the course and have already learned a couple things I had no idea that was a thing. I can't wait to finish thw program. I plan on getting a table saw as well but want to take it 1 step at a time with the router as my priority. I will re check the installation and report back. 😁👌

@TrainingHandsAcademy Год назад

@@joseluisruiz3789 Sounds great, I'm here! Also, if you'd be willing to leave a review on the course that would really be helpful. Thank you so much!

@moseskuagbenu2467 2 года назад

Hi.i have a problem..can there be a way out..my issue is my router bit is 8mm whiles the router it self has 6mm ..how can i fix the bit into the router

@TrainingHandsAcademy 2 года назад

Hey Moses! All you need to do is buy a 8mm collet for the router.

@dannymeil3294 Год назад

I subscribed to your channel.

@TrainingHandsAcademy Год назад

Thank you.

@steveroberson5147 2 года назад

I have a brand new Bosch MRP23EVS ROUTER. It has a 1/2 and a 1/4 collet. I cannot get either one to expand or contract. If I over tighten the nut, then the collet just gets stuck in the router. I know this is basic stuff but I cannot figure this out.

@TrainingHandsAcademy 2 года назад

Hey Steve. So, are you saying the bit will not stay tight?

@steveroberson5147 2 года назад

@@TrainingHandsAcademy The 1/2 collet appears to be fully open but a bit will not fit. Basically the same for the 1/4 collet. I own a Bosch 1617EVS and have no problem. I bought the other one because I needed a plunge router and a 1/4 collet. Am I making sense?

@steveroberson5147 2 года назад

@@TrainingHandsAcademy Ok, this is weird. I put my collets from my other router into the 23EVS and they worked fine. Only thing I can figure is maybe these are mm collets. They are definitely different. Thanks

@TrainingHandsAcademy 2 года назад

@@steveroberson5147 That totally might be the case. Have fun, and be safe.

@garvielloken3929 2 года назад

nooice!

@user-wq7jj9zr9r 2 года назад

I have the opposite problem. Brand new router and bit, both half inch. When I insert bit and tighten the collet, I can pull the bit out with no resistance or if I set router upright, the bit literally falls out. What am I missing? Both pieces are brand new.

@TrainingHandsAcademy 2 года назад

Are you on Instagram? If so find me and send me a video. instagram.com/traininghandsacademy/

@user-wq7jj9zr9r 2 года назад

@@TrainingHandsAcademy Thanks, I got it fixed. I had to separate the collet from the nut. I then placed the nut on bit followed by the collet, attached all to router and life is good.

@scottydntno Год назад

what if the 1/4" bit doesn't fit the 1/4" collet when the collet is completely off of the router????

@TrainingHandsAcademy Год назад

I'm not sure. You can send me a video via email or IG

@ceosealemon Год назад

Why does a drill blade on a router shake?

@TrainingHandsAcademy Год назад

Bad bit, bit not installed property, or taking too deep of a cut at one time.

@justglenng Год назад

Watch this video 10 times 2 figure out what was wrong... The half inch router shank would not fit in the collett so I tried tapping it down and only made it worse... Somehow by the grace of God I was able to extract the collet..... After measuring with a micrometer it turns out that the collett inside diameter fully opened is 63 /128 ths.... The shank is 69.. a 3/64 difference...smh

@c2757 Год назад

Just goes to show how much rubbish instruction manuals are these days. The manual says "take the collett out and fit the other size". It is roughly 50 years since I had my first router and I've absolutely no idea how the devil you get the collett out of the (expensive) new machine I bought 10 days ago. Anyone got some dynamite they don't want?

@sreejeshkv918 3 года назад

How to fit 6mm router bit to 8mm router machine

@TrainingHandsAcademy 3 года назад

Hey there. Try buying a 6mm collet that would fit your 8mm router.

@jimmyboon7646 2 года назад

👍

@vv6292 2 года назад

I spent way too long, trying to figure how to put my bit into my Ryobi router. The official Ryobi video has her shoving her bit in with ease. When I try to do it on mine. Didn't work. LOL

@TrainingHandsAcademy 2 года назад

I'm laughing with you. :)

@1Shaco 10 месяцев назад

i thought this video shows how to do a diy collet for an easy fix. or for people who can't buy them here.

@TrainingHandsAcademy 10 месяцев назад

Never do a DIY collet... not safe.

@mmashungmi1886 3 года назад

I am from Manipur, India. Beginner in carpentry. Really need help for sponsorship.

@ecapgaming2931 10 месяцев назад

i still can’t get it i don’t understand

@TrainingHandsAcademy 10 месяцев назад

Don't understand what?

@ggumfory 3 года назад

Last!

@ralphconnell8163 Год назад

Wish I'd seen this earlier....

@MultiUtube2020 3 года назад

Excellent information.... However I would be weary to handle the router bits without gloves.. They are extremely sharp and can lot of damage (especially trying to pull them out.)

@TrainingHandsAcademy 3 года назад

Great point. Be careful!

@MrCmbtmdc68w 2 месяца назад

Bit still won’t seat correctly.

@TrainingHandsAcademy 2 месяца назад

How can I help?

@glorygloryhallelujah 3 года назад

5th

@vinny142 3 года назад

All of this is ofcourse also mentioned in the manual of your tools so although you are a man, try reading them before operating your tools ;-)

@TrainingHandsAcademy 3 года назад

We all know that manuals are only used after we can't figure something out. LOL

@richardhurts3495 5 месяцев назад

Holy shit you like to talk

@TrainingHandsAcademy 5 месяцев назад

Praying for you now... may the Lord settle your anxious thoughts and protect your mind from anything that may cause you harm. I pray that He guides and leads you in ways that you have never known was possible. I ask that He gives you a new heart towards others and yourself. Thanks for the comment, because without it, I would have never known you and been able to pray for you. Peace and Grace to you!