RTS Tactical Level III+ AR600 Special Threat Armor Plate Test!

Подписаться 83 тыс.

Просмотров 9 тыс.

50% 1

Testing out some armor plates sent over by RTS Tactical. I hit em with everything plus the kitchen sink! 9mm, 5.7x28, .44 Magnum, 5.56, .308, 30-06, .460 Magnum, .50 Beowulf, 12 gauge sabot! You have ammo during the shortage, but what about body armor?
RTS Tactical bit.ly/37Lmq4L
Level III+ Plate Set bit.ly/3uT4Q8h
Join this channel to become a member of The Range Gang:
/ @toolsandtargets
I am not promoting, nor do I have any affiliation with, any of the retailers or manufacturers shown in this video.
All shooting is performed on a private, closed range on private property under controlled situations. Do not attempt any activities shown in the videos on this channel
No firearms or ammunition are offered for sale in this video or video description. There are no links provided to sites where firearms or ammunition are available for sale.
Amazon Affiliate Storefront: www.amazon.com...
*Axil Affiliate Links*
GS Extreme Earbuds bit.ly/36HwcEt
GS Electronic Earbuds (Non Bluetooth) bit.ly/3JV55nx
Trackr Blu Ear Muffs bit.ly/3HpsR9x
Trackr Electronic Ear Muffs (Non Bluetooth) bit.ly/3M72Lff

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 277

@RL-RL 2 года назад

I run the AR-500 Veritas carrier with the multi curve level 3 plates with the extra spall coating and the absorbant concusion material behind those. I'd rather run steel plates and get used to the weight than ceramics that expire and many won't penetrate, but still leave concusions enough to severly harm your insides and break bones. "It didn't go through! But look at that buldge it left behind!" I've shot expired ceramics with Muzzy Bone Breaker broadheads with a bow, and they will go through when a rifle round wouldn't! Steel is the way to go!!!

@ToolsandTargets 2 года назад

Agreed. Steel is the king for me.

@JohnLloydScharf 2 года назад

@@ToolsandTargets I would prefer titanium with foam backing... or an invisibility cloak. Mostly, I prefer not to be there than to hope they will hit a square foot on my chest. Given my target is the right kidney, body armor would not help you.

@JohnLloydScharf 2 года назад

If you shoot at someone with any projectile when they have armor, your aim is off if you hit the armor.

@mynamejef7963 Год назад

⁠@@JohnLloydScharf the entire point of body armor is to protect the one square foot section of your body that if perforated, you’ll most likely die bruh you can be a quadriplegic but you can’t survive loosing your chest cavity. Get hit in the face well just gotta tip your hat 😂

@sergiogiron3659 2 года назад

Very impressive. The fact that they where hit in the same spots at different calibers really impressed me. Great video tools.

@ToolsandTargets 2 года назад

Thank you sir. That was actually probably the most impressive part. Multi hits from some pretty powerful rounds.

@dowermark2 2 года назад

I'm glad to see companies sending you stuff that's awesome it's cool to see your channel grow

@ToolsandTargets 2 года назад

Thank you sir. I'll definitely sling some lead at whatever they wanna send!

@JohnLloydScharf 2 года назад

@@ToolsandTargets Sounds like a challenge...

@derrickbowlin1527 2 года назад

Pretty impressive. I am glad to see the plate test. I have been debating on what to purchase for awhile now. RTS looks very legit.

@ToolsandTargets 2 года назад

They're definitely the real deal. I was pretty surprised by a few of these rounds being stopped.

@RL-RL 2 года назад

Fun fact: AR500 makes all these plates, but sends them to other companies for distribution and their own coatings. AR500 is the largest MFG of steel plates and many other protective steel products. Read the back of each one, and they are all made in NV. Each company does have their carriers made to their standards, but are made in China. RTS does have some of the best bundle packages IMO, even though I run AR500 products.

@robertharing7031 2 года назад

We don’t see as much testing done on armor as we used to! This one was very interesting and informative! Thanks tools

@ToolsandTargets 2 года назад

Thank you sir.😎👊

@saskcop416 2 года назад

It is all about velocity and bullet weight. The .30-06 did exactly what I figured it would.

@ToolsandTargets 2 года назад

Yessir. It has a nice combination of both.👍

@timd5330 2 года назад

Yes, You are the best with the real world application tests# 1 with no BS . Love your channel !!!!!

@ToolsandTargets 2 года назад

Thank you sir. I really do appreciate that!😎👊

@terrell48 2 года назад

It’s Saturday and a beautiful sunny day here in Texas in the 70’s

@ToolsandTargets 2 года назад

Yessir. Spring has sprung!

@vegetar7886 2 года назад

If that can stop a 30-06 it's more than good enough. Another great video 👍👍

@ToolsandTargets 2 года назад

Absolutely. Thank you sir.

@weilandlawncareservice5592 2 года назад

Your best test to date Tools!! Loved watching this test, as I have been researching the RTS armor myself. Not sure what I liked watching most, the test itself, or your amazing collection of weaponry.

@ToolsandTargets 2 года назад

Thank you sir! It was definitely fun. This stuff is tough!

@tommylitchfield3450 2 года назад

Tools has got the toys, don't he!!

@leederby136 2 года назад

Wow, I’m impressed on the performance of the plate! When I saw all those guns I knew it would be a good show! Thanks Tools 🤠

@ToolsandTargets 2 года назад

Appreciate that!😎👊

@joehelvey5794 2 года назад

My plates are “Come and Take It” hard plates, but prefer the new soft more flexible 3+ armor for shtf or whatever. I always appreciate seeing these type of tests especially with these firearms, great test tools!

@ToolsandTargets 2 года назад

Thank you sir. These things definitely took the hits.

@billdye3530 2 года назад

Hope you get at least a 2% commission on everything they sell after today. Very impressed with this product. I thought you would have a crease in the front of your straw hat when shooting the 460 off a rest. It hit hard & just imagine what the concussion would do to your organs & ribs. Great video.

@ToolsandTargets 2 года назад

That thing is an absolute monster! It might leave you wishing it went on through.😆

@billdye3530 2 года назад

@@ToolsandTargets That Beowulf is a thumper but doesn't compare to that Hard Cast 460 round. I would rather it take me out instantly compared to suffering with busted organs for weeks & then going out.

@bobg.8954 2 года назад

Totally impressed. This is really useful info now days, I'm definitely going to look into these plates! Great job T&T!

@ToolsandTargets 2 года назад

Thank you sir. They did what they claimed and more.👍

@jackbaird5235 Год назад

Once again another great test tools!!! I am researching some different armor plates I have RMA right now with your about 8 lb of plate trying to shave off a little bit of weight you put out some of the best videos on this whole RU-vid place absolutely love them keep them coming sir

@Nutty.357 2 года назад

I would say as well as that worked, being 7lbs is a moot point as far as being too heavy! I would rather carry a little extra weight and know nothings coming through it! That spalling would definitely be rough under your chin lol! I am most impressed that the bottles didnt bust/rupture, not from penetration but from force of impact which leads me to believe your ribs and internals would probably be ok just a little sore and bruised! Thanks for sharing brother! I like that plate! I was doing a little target practice taking advantage of the nice day here and missed another premiere dang it! lol have a good one

@ToolsandTargets 2 года назад

Thank you sir. I was surprised the bottles didn't bust too!

@frank6029 2 года назад

Worked absolutely fantastic great test as always Be Safe and God Bless enjoy your weekend 🙏🙏

@ToolsandTargets 2 года назад

Thank you sir. They soaked it up!

@TranslateToEnglish 2 года назад

Wouldn’t miss it for anything, dude!

@ToolsandTargets 2 года назад

Appreciate you!

@Donald_R_DeCicco 2 года назад

RTS took a whoopin and kept on truckn. That was a cool video bro, especially when the sabot put a smack down on it.👊

@ToolsandTargets 2 года назад

Yessir. It did awesome. I have some more stuff from them coming soon.

@tommylitchfield3450 2 года назад

Man, that's a table full of sexiness! And that is some fine armor!. Taking them hits from one powerful round right on top of another powerful round was super impressive! I gotta show this to one of my .308 fan family members that thinks they are badder than the ol' -06. Nope! Tools, you can just use a little duct tape on that plate carrier and make your money back on Craig's List... "Slightly used'!! :) Just wait for all the pieces and parts to rain back down to earth, and Bob's your uncle!

@ToolsandTargets 2 года назад

🤣🤣🤣 Yessir. That 30-06 came to play!

@jeffray6197 2 года назад

Fantastic video! I wore body armor every shift for over 27 years and, even though it was uncomfortable, it never crossed my mind to not wear it! In fact, I felt ‘naked’ not wearing it! It kept me on the ‘North side of the dirt’!! Great Saturday video my friend! Enjoyed it immensely!! Thank you!!👍🏻

@pewpewTN 2 года назад

Did you wear soft vests or hard armor?

@ToolsandTargets 2 года назад

Appreciate you brother!😎👊

@jeffray6197 2 года назад

@@ToolsandTargets Right back at ya!!👍🏻

@2Amendment 2 года назад

Quality Plate carrier for sure. LOL Fun Video to watch. Keep it up Tools

@ToolsandTargets 2 года назад

Thank you sir. It definitely stopped some power.

@johntaylor8582 2 года назад

The big boy 44 shoved it back a few inches. Nice 30-06. Great review 👏.

@ToolsandTargets 2 года назад

It definitely took some powerful hits out there! Thank you sir!

@robertvick258 2 года назад

You should have tried shooting the Armor with the 22 PUNCH! LMAO Great vid buddy your really taking off in the RU-vid world. Keep them coming and good luck. Like the north end of the dirt saying.

@ToolsandTargets 2 года назад

Punch would have gone through the front plate, all the bottles, the back plate, and one of my steel targets downrange at 50 yards!😜

@rsbreeze 2 года назад

Excellent test! Looks like some reliable armor!

@ToolsandTargets 2 года назад

Thank you sir. It took it like a champ.

@pewpewTN 2 года назад

The best thing about ceramic is the way most of them are made, they catch the projectiles & you wouldn't get hit with spalling.

@ToolsandTargets 2 года назад

Very true. I just wouldn't wanna have to count on em to stop too many of something like these .308 or 30-06 at once.

@ronaldbarnes8302 2 года назад

Wore soft armor on the job for years. Looks like pretty good plates there. Definitely need to think about these, and the price is good. Thanks for sharing!

@ToolsandTargets 2 года назад

Thank you sir. They definitely soaked up some power!

@Dwayne7834 2 года назад

I don’t know much about armor plates. But these did a good job for your test. Thanks for the video

@ToolsandTargets 2 года назад

Thank you sir. These definitely did what they claim and then some.👍

@Dwayne7834 2 года назад

@@ToolsandTargets Do you watch Mark and Sam . If not you should watch their latest video. About lead bullets shooting through steel plates. Very interesting.

@Dwayne7834 2 года назад

Mark and Sam after work.

@ToolsandTargets 2 года назад

@@Dwayne7834 Never heard of them. I'll have to check it out.

@mgabriel2636 2 года назад

The m855 was the hardest and most impressive test as, due to thermodynamics, speed kills armor. You could try .xm193, .243, 6.5 creed, .270, 30.06 ap, 300 wm and 7mm rem mag. but i'm sure the sponsors wont appreciate those last two... you could try a 20 inch or 24 inch barrel on the m855 too, for when you are ready to test to failure, since it did quite well so far... Thanks for the testing!

@ToolsandTargets 2 года назад

Thank you sir. I think it would do surprisingly well against most of those.

@Bluesky5553 2 года назад

Very nice test sir. No surprise on the 30-06 making more of a dent than the .308.

@ToolsandTargets 2 года назад

Absolutely. Thank you sir!

@boogerdog5247 2 года назад

Awesome plates...Looks like the Underwood's need more speed, which the 30-06 does have.

@ToolsandTargets 2 года назад

Yeah, that 30-06 came loaded for bear.

@boogerdog5247 2 года назад

@@ToolsandTargets I have a few rare, no longer "available" 30-06 bronze points, from the mid 70's that Chuck covets at Alaskan Ballistics, that I only used to pinpoint my scope with, never hunted with them. They might be 165 gr., but they aren't available anymore for some reason.😆

@skydivin0788 2 года назад

If you do another video like this, could you please put a melon at the top of the plate to show the shrapnel you would take to the chin if any? It would be really cool to see aswell. Great video and impressive plates. Thanks

@ToolsandTargets 2 года назад

Will do. I actually thought about that after I had already done the video.👍 Thank you sir.

@TheProAer 2 года назад

I remember when you and Jr @ CR42 Hunting had that competition. Both of you had clever ideas for your homemade armor.

@ToolsandTargets 2 года назад

That was a lot of fun!

@outdoorswithroostercurrie6984 2 года назад

Awesome video. That’s some Tuff body armor

@ToolsandTargets 2 года назад

Thank you sir. It definitely did what it says!

@stoneblue1795 2 года назад

Certainly, valid tests. I actually thought it was ceramic until you clarified near the end.

@ToolsandTargets 2 года назад

They took everything I had to throw at em.😎👍

@crankygunreviews 2 года назад

Makes me want some body armor :) Cool video, some fun guns to test with too!!!

@ToolsandTargets 2 года назад

It definitely soaked up those hits like a champ. Thank you sir!😎

@boddyxpolitic 2 года назад

Come on tools! You didn't try the punch .22 😂

@ToolsandTargets 2 года назад

I didn't wanna embarrass RTS!😜

@randlerichardson5826 2 года назад

Hey Tools I’m been wanting to see this one for sure

@ToolsandTargets 2 года назад

It's some good stuff.

@hamacus 2 года назад

Good stuff Tools. Keep em coming.!

@ToolsandTargets 2 года назад

Thank you sir. Appreciate you!😎👊

@josephmelson7591 2 года назад

Awesome video well you can salvage the plastic strap's on that plate carrier that's about it them snaps are about 3-5 dollars each these days any way..

@ToolsandTargets 2 года назад

Thank you sir. Very true.

@stevesmith8854 2 года назад

Wow. Impressive plate.

@ToolsandTargets 2 года назад

It definitely did the trick!

@williamhuffer6954 2 года назад

Great video thanks for sharing..Maryland checking in.

@ToolsandTargets 2 года назад

Appreciate ya, brother!😎👊

@kosherlechon Год назад

I’m curious to see what the build coating will catch. Be great to see it in a cardboard box catch for results! ❤

@corbinpowell128 2 года назад

It’s really interesting that the 30-06 did the most damage and didn’t even poke a hole in it. Well that means you should look into getting some black tip 30-06. Black tip 30-06 is a armor piercing round, so you should definitely try that next if you can get some.

@ToolsandTargets 2 года назад

That would probably do the trick.

@corbinpowell128 2 года назад

Thanks for the content! I’m really enjoying it.

@corbinpowell128 2 года назад

I did some quick research and found out that level 4 body armor can only stop one armor piercing 30-06 round, so yah that plate most likely wouldn’t stop it.

@JohnLloydScharf 2 года назад

If this were 2x4 feet, it would be great to use as cover. Maybe if it said "Shoot Here" you could reduce it. Criminals are not always intelligent. The problem we had with body armor, which claimed to be stab resistant, was it restricted movement. I intend to be a moving target the moment I leave my home. If you think it difficult to conceal carry firearms, try steel body armor. Every defensive move you make will be telegraphed. Ballistic armor clipboards make more sense.

@ToolsandTargets 2 года назад

👍

@allen_p 2 года назад

Good video. A little flex seal will fix that plate right up 😆 I have Leve III+ Lightweight ASC hard armor from AR500 armor. 6.5 lbs, but I see they don't offer this Lightweight version now.

@ToolsandTargets 2 года назад

Nice. Flex seal will fix anything!

@cpprcrk1833 2 года назад

Speed is what does the most damage on these type of plates . Who_Tee_Who ran a similar test , and if I recall correctly , only two that defeated it was a 243 Win shooting a 80 grain bullet at close to 3,500 fps and a 50 BMG .

@ToolsandTargets 2 года назад

50 BMG would defintiely go through. I highly doubt .243 would go through this specific armor. I shot this stuff at 10 yards.

@jardinero9112 2 года назад

It's always good to be on the north end of the dirt big hoss.

@ToolsandTargets 2 года назад

Yessir!

@billdubois5223 2 года назад

Another great review video Brotha , most impressive results ..

@ToolsandTargets 2 года назад

Thank you sir.

@davidl416 2 года назад

Good stuff, sadly I knew the Beowulf wouldn't make it, have sent many types of rounds at steel plate gongs and you have a better chance of breaking the ears off the gongs from the amount of energy than punching through.

@ToolsandTargets 2 года назад

Yeah, I've never hit any of mine with the Beowulf at ten yards like this but I have smacked em out at 50 and beyond with no problem.

@charlesmorgan1879 2 года назад

I missed some vid time but trying to get caught up. Looks like a great product.

@ToolsandTargets 2 года назад

It sure soaked up the rounds. Appreciate ya as always brother. Hope everything is goin good.

@seangeoghan6163 2 года назад

Great job tools. It looks very reliable. Thanks again

@ToolsandTargets 2 года назад

Thank you sir.

@nataliedeyton6829 2 года назад

Speed kills armor!!! Get the fastest rounds you have in the longest barrels. 20 inch AR xm193 usually do pretty well

@ToolsandTargets 2 года назад

I don't think 5.56 is gonna do anything to this stuff even out of a long barrel. It's tough!

@Rusted_Link 2 года назад

That's what I just picked up. Thanks for proving that I made a wise decision. I hope I never get mine tested.

@ToolsandTargets 2 года назад

Nice! This stuff took everything I slung at it, easily!

@michaeljefferis171 2 года назад

"North end of the dirt" I'll take that every day.

@ToolsandTargets 2 года назад

Amen!

@jeffreyrobertson7652 2 года назад

Great video Tools Really enjoyed it one tough plate Stay Safe Stay 2A Strong 🇺🇸

@ToolsandTargets 2 года назад

Thank you sir. It took a beating and then some!

@jimmydunn3775 2 года назад

Too afraid to knock a hole in that plate with the Punch I see!!! 🤣 Great video as always buddy!! Do you have a secondary platform we can find you at?

@ToolsandTargets 2 года назад

I didn't wanna embarrass RTS with the Punch!😂 I don't use any other video sites or social media. Just YT and email.

@hoffpbass 2 года назад

I'm hypothesizing that someone's chin or arms would catch some shrapnel from some of those rounds. I've seen other videos on pistols using Xtreme Penetrators that go through Kevlar vest. So I was totally surprised this plate held up to that rifle round.

@ToolsandTargets 2 года назад

Yeah, you would definitely want a build coat to catch more of the shrapnel. Kevlar is pretty much like paper compared to this steel.

@steveallen2610 2 месяца назад

I was going to buy these plates. BUT they do not come in level lll+ anymore they are only level lll now. I e-mail RTS and was told that they are in fact level lll. The description says they are a lll+ but they are not. It is really misleading to say one thing and you get another.

@danielpollard3969 2 года назад

Great test video.👍

@ToolsandTargets 2 года назад

Thank you sir.

@ploxplox1109 2 года назад

Wow very impressive great vid brotha

@ToolsandTargets 2 года назад

Thank you sir.

@hhhservicesllc3163 2 года назад

Great vid Tools!!!! You're startin to look like a "hippy" with that long hair.. lol Miss Your lives Sir.. Hoping to see you soon live! These "cheaper" plate carriers will be fine, if you have a Kevlar coated plate.. no Spaulding effect like a "regular plate.. Again, great vid Brother Tools!!! Appreciate Ya!

@ToolsandTargets 2 года назад

Thank you sir. I would definitely opt for the build up coating on these.

@shawngraziano9497 2 года назад

One drawback about steel the shrapnel from breaking through the Spaulding

@ToolsandTargets 2 года назад

Yeah, I'd be curious to see how much better the build-up coating contains it.

@terrell48 2 года назад

Does not surprise me you’re shooting lead projectiles which are softer than the plate exception is the Beowolf copper but softer than steel

@ToolsandTargets 2 года назад

😎👍

@YellowHammer26 2 года назад

👍👍 Appreciate the video, plate was pretty impressive

@ToolsandTargets 2 года назад

Yessir. Appreciate you watching!

@tdeberry71 2 года назад

Came in too late so I had to re-watch. That's some tough stuff but I still wouldn't want to be on the receiving end of any of them.

@ToolsandTargets 2 года назад

You got that right. I saw ya sneak in late!😉

@phillewis1768 2 года назад

Might have a few sore or broken ribs, but you would still be alive. That's some tough stuff!!!!!!!

@ToolsandTargets 2 года назад

Absolutely!

@ctsnider88 2 года назад

That was fun! It might break a rib or two 🤔

@ToolsandTargets 2 года назад

It sure wouldn't feel good.😆

@bigtrev761 2 года назад

🇦🇺😎👍 Brother I set the alarm and Big Trev’s ready for ACTION 💥🇺🇸🏁

@ToolsandTargets 2 года назад

Appreciate you hangin out, brother!

@pabloescobar7802 2 года назад

I have level 3 Ar500 plates .. I put Spartan armor 3A soft panels behind it for extra insurance..

@ToolsandTargets 2 года назад

I'd definitely want the soft stuff behind em too.👍

@randalbigirvirvin1153 2 года назад

Dang!!! That's impressive. Wouldn't want to be the test dummy but at least you'd wake up tomorrow.

@ToolsandTargets 2 года назад

Agreed. You might be laid up for a while but still breathing.

@eaglespetty 2 года назад

Time to return that defective plate carrier.😄 LET'S GO BRANDON!

@ToolsandTargets 2 года назад

Now thats funny!😂 FJB!

@Devast8r34 11 месяцев назад

Great video

@upholdthesecond92 2 года назад

Very impressive

@ToolsandTargets 2 года назад

It took a whole lot of lead!

@robertwess4556 2 года назад

Another great video

@ToolsandTargets 2 года назад

Thank you sir!

@randlerichardson5826 2 года назад

Wow I’m speechless sure enough

@ToolsandTargets 2 года назад

I was really surprised by a couple of these.

@wesleycameron1034 2 года назад

Holy 💩 I’m impressed

@ToolsandTargets 2 года назад

It ate it up!

@randlerichardson5826 2 года назад

The hit taken from the big rounds would bust bone and tissue up bad I’d say

@ToolsandTargets 2 года назад

Yeah, it wouldn't feel good for sure.

@randlerichardson5826 2 года назад

Tools I can load you a couple 30-06 rounds that will go through that easy I’ll leave it at that

@ToolsandTargets 2 года назад

You got them black tips eh.😎

@randlerichardson5826 2 года назад

Tools I was on the road bro I missed the live chat I’m sorry I was looking forward to seeing it I’ll watch it in a little bit brother

@ToolsandTargets 2 года назад

No problem sir. You gotta take care of your stuff!

@randlerichardson5826 2 года назад

@@ToolsandTargets thanks brother

@MegaBait1616 2 года назад

Although I like .30-.06 I prefer .308.... .308 now a days is much cheaper these days....... be well.

@ToolsandTargets 2 года назад

You aint kidding. 30--06 ammo is way more expensive and still a little tough to get at times.

@MegaBait1616 2 года назад

@@ToolsandTargets , yep way more for apox. 100 foot faster than a .308.

@davidjernigan8161 2 года назад

338 Lapua with a 250 fmj lock base.

@ToolsandTargets 2 года назад

Now you're talkin crazy!😜

@herbertblevins7077 2 года назад

How about a mag dump of the 5.56 green tip or 7.62x39 steel jacket ?

@ToolsandTargets 2 года назад

I can definitely do that. Maybe I'll make a short out of that.👍

@justinappling614 2 года назад

Cool video! I would be interested to see if a 7mm rem mag, 243, 270 or a 22-250 would penetrate. I have always heard that the name of the game with defending plates is speed.

@ToolsandTargets 2 года назад

Thank you sir. I highly doubt it. This 5.56 was no slow poke even out of a 10.5 inch barrel and neither was this 30-06. Even the .308 was movin on out. That was a 20" barrel. I'd say it would take some type of AP round in 30-06 or possibly .308 without moving way up to something crazy.

@308guy8 2 года назад

243 will suprise you they're known for defeating plates

@ToolsandTargets 2 года назад

@@308guy8 I'd gladly make a wager that would cover the cost of a .243 rifle just to test this. I have absolutely no doubt that it will easily stop it.🤷‍♂

@308guy8 2 года назад

@@ToolsandTargets I've got a 243 your welcome to use

@ToolsandTargets 2 года назад

@@308guy8 But I wanna win one of my own!😜

@randlerichardson5826 2 года назад

Wow I’m speechless Tools

@ToolsandTargets 2 года назад

Me too!

@JohnLloydScharf 2 года назад

I think three layers of porcelain floor tile can replace it.

@RL-RL 2 года назад

LOL! With a roll of Gorilla tape too!

@JohnLloydScharf 2 года назад

@@RL-RL I would have said seven reems of printer paper, but that is a bit more heavy to carry on your chest. The last time I wore body armor was when I was forced to appear for jury duty. It is not a substitute for being armed.

@ToolsandTargets 2 года назад

Wouldn't be bad until you started taking multi hits. This steel can take hits all day long right on top of each other.

@JohnLloydScharf 2 года назад

@@ToolsandTargets Personally, I plan not to be hit twice once I know someone is shooting. I suspect the second shot would not be aimed at the body armor. This body armor does seem the most effective. I committed to a test of body armor for a year for correctional officers. It was heavy and so hot one officer passed out. It was like living in the boiler room of an aircraft carrier.

@JohnLloydScharf 2 года назад

@@ToolsandTargets The reason for having THREE is to take multiple hits. The reason for porcelain FLOOR tiles is they do better than the tiles use in body armor. SEE: "Ceramic Tile showdown! Which ceramic is best at stopping Rifle rounds"

@MateoFrateo 2 месяца назад

If their III+ is doing this what are their higher rated plates do

@boogerdog5247 2 года назад

Waitin...fer' it...on the Underwood Beobooger, cause I pick n flick 420 Extreme's...LEEEE-HIGHHH

@ToolsandTargets 2 года назад

😂😂😂 It thumped that steel for sure.

@boogerdog5247 2 года назад

@@ToolsandTargets Those are some really good plates. Angle of incidence is a functional factor. Please for a round two, with perpindicular incidence. 🤔

@tylermatthews7655 2 года назад

Try a 22-250 or a 243 with light bullets, might be surprised

@ToolsandTargets 2 года назад

They definitely have the speed but there's not a chance either one of those will defeat this III+. It would take some kind of AP 30-06 would be my guess.

@ToolsandTargets 2 года назад

Appreciate that, brother!😎👊

@kevinroberts781 2 года назад

Steel armor is really the only option. To bad it's heavy.

@ToolsandTargets 2 года назад

Agreed

@scottrussell6717 2 года назад

You live in some beautiful country

@ToolsandTargets 2 года назад

It aint too shabby. Gives you a nice echo from gunfire through the valleys too.

@constrictorguywilson2071 2 года назад

I think it may shocking results

@ToolsandTargets 2 года назад

It definitely took a beating!

@bigtrev761 2 года назад

🇦🇺😎👍We aren’t allowed any armour in Australia. Armour is a licenced product and comes under cat e of the firearms act. The only people who can have it are military , police and security guards. When I was a guard years ago I would need to be first a licenced guard then do a course to get a ( work ) weapons licence. Then that licence would cover pump action shotguns, handguns , hand cuffs & bulletproof vests ( Big Trevs history lesson ). Note : No guard can take any of his tools home as they can only be used at work ✌

@ToolsandTargets 2 года назад

Wow, that's unreal. I didn't know that.😣

@bigtrev761 2 года назад

@@ToolsandTargets Yeh there’s all types of rumours in regards to our laws but we can have some things. Keep in mind Australia always was a safe and peaceful country without their laws but they keep tightening the noose like we are a danger to ourselves and others.... Very little happens here and it not because of their rules✌

@randlerichardson5826 2 года назад

The 50 will go through

@ToolsandTargets 2 года назад

It thumped it good.

@jdowdy661 2 года назад

I thought about getting this plate but went with caliber armor instead

@ToolsandTargets 2 года назад

They definitely did the trick!

@semichiganandy2127 2 года назад

Nice vid!

@ToolsandTargets 2 года назад

Thank you sir. Appreciate you watching!

@williamray3101 2 года назад

Armor impressive I say.

@ToolsandTargets 2 года назад

Yessir!

@jeremiah7855 2 года назад

I'd say that 3006 has the most energy it anit no joke if you had true black tip ap rounds I think it would go tru it

@ToolsandTargets 2 года назад

I might be getting some real deal .308 black tips.👍

@josephbeaver3574 2 года назад

Neither the 460 or 50 beowulf will go through I say that because the 308 fmj had the best chance penetration wise the 3006 would have but it was tiped hunting ammo when it comes to body armor it depends more on what the bullet is made of and also speed will determine if it will penetrat or not the 460 and 50 are just to big diameter to go through to me

@ToolsandTargets 2 года назад

😎👍

@josephbeaver3574 2 года назад

@@ToolsandTargets I would not of guess it back before i had learned about body armor but I've watched every video out there on it about it keep up the great videos I wanna see the 44 mag Henry vs a 44 mag revolver in gel i want a video to show people how powerful that 44 mag is out of a 20 onch barrel i have the sane henry big boy just the chrome all weathered and it has almost double the energy of a 44 mag revolver its around 1800 footlbs of muzzle energy with a 900 foot lb load on the box for a revolver it is like a 454 casull out of that 20 inch barrel

@ToolsandTargets 2 года назад

@@josephbeaver3574 Thank you sir. I can definitely do that. This rifle turns the .44 mag into an absolute monster!