RUST-OLEUM ROCK SOLID GARAGE COATING 2021

Подписаться 55 тыс.

Просмотров 63 тыс.

50% 1

If you found this video helpful, Feel free to buy me a beer!
www.buymeacoffee.com/letsdrif...
Join my Discord
/ discord
#dreamgarage #DIY #rustoleumrocksolid #garageepoxy #polycuramine #epoxy #epoxyshield
IG @nick.nakai
TIME STAMPS BELOW
Intro 0:55
Degreasing Concrete 3:20
Sanding Concrete 8:26
Applying the Rock Solid Poly Curamine 17:29
Applying 2nd coat of Rock solid since spots were missed 26:34
Mistakes 28:59
Applying Clear Coat 30:11
Finished Product 34:55
Close Ups 37:16
In this weeks video I document the entire process it took me to coat my 2 car garage with Rust-oleum's Rock Solid poly curamine kit, I also used the clear epoxy shield to add extra protection, As this was my first time doing a project like this, many mistakes were made, Hopefully this video will help others avoid the mistakes I made, But overall very happy with the results.
Music-
www.epidemicsound.com

Опубликовано:

24 апр 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 200

@afentikos 3 года назад

Lmao sorry but I laughed the whole time you used the surface cleaner in the upright position.

@LetsDriftMedia 3 года назад

Tell me about it 🤦‍♂️🤦‍♂️😂😂

@octaviocasarez5505 3 года назад

Bro I give you props for using that machine in the upright position. It’s hard as hell to maneuver that thing in that position.

@Adams_Grage 2 года назад

I was too get that buffer was working his ass over good thing he was using a wide base stance lmfao 🤣

@piapug 2 года назад

Omg. I’m with ya!!🤣🤣🤣

@ftwbreeze 3 года назад

Hello Nick. Finished product looks amazing! You earned much respect again!

@science999 3 года назад

For your first time it really isn’t bad and it seems like you learned a lot. Well done😊

@LetsDriftMedia 3 года назад

thanks, yea im satisfied with it and did learn alot.

@proximacentaurib7018 Год назад

@@LetsDriftMedia you misses the sealer. It seals the concrete and prep it for the paint/epoxy... and might be the reason why it bubbled ?

@syiceman 3 года назад

I've watched 100s of these videos this is by far the most informative

@LetsDriftMedia 3 года назад

Thanks man! I too watched 100s of videos before attempting to do it. Still alot of things I would have done different.

@rolandvillarreal2687 2 года назад

Looks good. I'm getting ready to do my floor next week. Thanks for the video and information.

@scoob66 3 года назад

Still came out pretty sick. Can't wait to continue to see improvements to the garage

@LetsDriftMedia 3 года назад

thanks man same here!

@HarryLopez82 2 года назад

I did mine with out the chips ..looks good for a first timer I just didn't buff it out..I went the cheap route but worked

@markpoposki 2 года назад

What an honest video experience! great job dude!

@markpoposki 2 года назад

I am getting mine in couple of days. I am going with the rocksolid polucuramine clear coat and not the Epoxy shield. It’s prob double the money so I hope it turns out good. Seeing what you ent through in only using a tiny bit of sand in the clear coat. Also I bought 25lb of decorative chips so hope that will help with preventing bubbles. Oh and I’m def getting spike shoes and I’m gonna epoxy the raised edge since I have the same thing in my garage. Will have the torch on deck ready and watching for bubbles lol.

@toytech468 3 года назад

Coming together nicely bro! 😎

@williamhunter1959 2 года назад

Nice video your garage looked good!! Yeah that clear coat has that grainy look because of the anti skid mixed in. I did mine and it looks perfect. Nice Job man you didn't F it up lol!

@jackpbass 2 года назад

Top notch effort. Excellent information on correcting mistakes and on how much product to use. Wanted to watch this with my grandson as he will help me do my garage, but language got a bit dicey. Otherwise outstanding effort.

@nakobilly 3 года назад

Good job Nik!

@justincampos9942 3 года назад

Nice brother came out great thanks for the video

@FXDKenKim 3 года назад

Looks good nick! 🤙

@nono-fn3zc 2 года назад

I’m glad that I found your video. I am applying this product to my dirtbike trailer floor. I bought the 1-car garage kit and it didn’t even cover my 7x16 floor and no coverage on the ramp at all. Rust Oleum is buying me a second kit under a satisfaction warranty, and my worry is rolling over the thin but flaked sections that I already laid down. I saw you rolling over flakes, so I’m relieved. I was so careful to preserve product and didn’t expect that the coverage would be 1/2 of advertised! I even poured the anti skid into the pouch abs mixed, so I wouldn’t leave any on a maxing paddle and bucket. Lol. I hope the second application will cover the first plus the ramp door!

@LetsDriftMedia 2 года назад

Awesome man! I’ve never heard of anyone putting this on trailer floor that sounds badass

@nono-fn3zc 2 года назад

@@LetsDriftMedia so far it’s just ass, lol. I’ll reply after the next coat and let you know if it levels up to bad ass :)

@nono-fn3zc 2 года назад

@@LetsDriftMedia I can’t upload pics, but I came up short again. It covered the 7x16 trailer well, but I barely had anything left for the ramp. I’m calling tomorrow to find out what to do. If I can paint over it, I’ll paint the ramp door with some porch paint. As for the rest of the job, I put on a nice coating and all looked great. It has already sucked in at a few spots showing thin, but I can’t justify buying another kit unless Rustoleum wants to pay for it. Lol.

@nono-fn3zc 2 года назад

3rd package and we’re finally looking covered. It’s curing now. It better last after all this!! 🙏😀

@Ariztid 3 года назад

I about lost it when I saw him use the grinder upright and all that shit he was talking about Home Depot employees 😂

@seanzievlogs7126 2 года назад

Well, he isn't paid to know what to use or how to use it. It was pretty funny tho

@nutzboltztoolz2734 3 года назад

Looks awesome 🤙

@LetsDriftMedia 3 года назад

Thanks 👍

@NoName-ux3by 3 года назад

Thansk you Nikko

@proz33builds 3 года назад

Good stuff brotha came out pretty good

@LetsDriftMedia 3 года назад

thanks man

@proz33builds 3 года назад

@@LetsDriftMedia no problem brotha I’m in the middle of remodeling my garage myself too so I’m looking forward to this part

@scoob66 3 года назад

Home improvement stores definitely be like that man. They'll throw people in departments they don't know anything about

@Brunotisk 3 года назад

Sick dude

@V_RB 2 года назад

Looks good man! So overall, how many bags of grey did you use? Have you figured out why it bubbled?

@virgilecoffey9976 3 года назад

Well Done!!!!!!!!!!!

@VF1Skullangel 3 года назад

I used to do garage floor coating. Outside of eco corplex this stuff is great!

@LetsDriftMedia 3 года назад

Nice well see how long this last.

@codyholst6056 3 года назад

Rustolum is garbage

@gibrilafreites7666 3 года назад

Hi Nick, I think your garage looked amazing, hard work but worth it; I laughed a lot at how you used the surface cleaner (sorry xD) I have some questions, I don't know if you or anyone can help me; I want to apply this product in my garage, but I have a pretty steep ramp; this product has self-leveling??, another question would be very necessary the anti-slip??, as I have noticed in your video as in others that it is quite bright but I don't know if it would be very slippery. Thanks for sharing this work.

@yakinwithdan Год назад

That's the issue 26:35 and how you're essentially over agitating the bag mixture / you really need to gently fold the 2 compounds together instead of shaking it which introduces air into it ie. the bubbles therefrom

@LetsDriftMedia Год назад

Interesting, thanks didn’t know that

@noec.7556 3 года назад

Damn. I wouldn't have put the anti skid sand now knowing. Very informative video 🤙

@LetsDriftMedia 3 года назад

yea I would just sprinkle it on after laying the clear, putting the whole bag was a big mistake.

@roskul 2 года назад

@@LetsDriftMediaThanks for the vid! Preparing to put the same clear finish on my garage floor. Do you think that anti-skid is even worth it? Don't the flakes serve the same purpose?

@LetsDriftMedia 2 года назад

@@roskul I dont think its necessary, but I would still add a little sprinkles of it once you lay the clear.

@ChosenLobo 2 года назад

Ahhh yes here it is 👍🏼👍🏼👌🏼

@luminousbrilliance1711 2 года назад

I appreciate you and your crews OCD-It looks great. Stupid Bubbles! :-)

@bronzeagle95 3 года назад

Honestly man it doesn't look that bad makes me want to do that when I buy a house one day k

@GerardoLopez-wl8mf 2 года назад

Thanks for the video am hoping to tackle this project soon! What is the sq footage of your garage?

@jbpasion071 3 года назад

Nice! I cant wait till you put in some cabinets! Ive added Newage cabinets and it look awesome on my channel! Let me know if you have any questions about it! Cant wait to see the final results on your garage

@LetsDriftMedia 3 года назад

Fersure thanks for the rec, I just checked there website out they look pretty awesome. your garage is looking nice too

@gregjones8501 3 года назад

Boom! First one here! Nice garage bro!

@LetsDriftMedia 3 года назад

Boom!

@johnhumes4312 3 года назад

I just noticed you used the clear coat from the epoxy shield, Rust Oleum makes a clear for the Polycuramine formula, Looks good tho,

@LetsDriftMedia 3 года назад

Oh wow I didn't even know they made one for the poly curamine 🤦‍♂️ dam

@zacheryshreves7516 2 года назад

For bubble use heat weather from a heat gun or propane torch

@caseyfenlon2238 3 года назад

do you think if you used the rocksolid primer that the coating would have been more uniform?

@LetsDriftMedia 3 года назад

Any brand of primer would have helped

@pushhrodd01 3 года назад

I have a old question nick. Whenever you fixed your Lexus how did you know your ECU wasn’t sending the correct voltage to the TPS? How can I diagnose it. Thanks

@zues2013 3 года назад

Back probe it Fluctuate the gas should bounce between 0-5v

@zues2013 3 года назад

Obviously close to 5v on WOT

@oakwood308 Год назад

I did my carport and what you forgot to do was put a primer on the concrete it would have cover all those dark spot.

@brisckets Год назад

I saw one video about that. So after cleaning. I let it dry for an entire week and I didn't have that issue.

@edwardduran4354 10 месяцев назад

the tread additive i think is what ur seeing for sure

@tanktexas 4 месяца назад

How is it holding up 2 years later

@Warkive 2 года назад

I get that everyone has a budget they have to operate around, but your time is worth something too. It always surprises me when folks exert thousands of dollars worth of effort in prep and then use a product like Rustoleum which is the basic equivalent of a 4-5 mil prime coat and with modest traffic will only last 3-5 years max before failing in spots.

@LetsDriftMedia 2 года назад

Yea like I said I just went for it with the knowledge I had. Im pretty sure theres a whole lot of other ways I should have went about it, but live and learn.

@michaeltrager4381 2 года назад

I just finished my 2 car garage with a re-coat of this stuff over 12 year old existing Rustoleum Oil based epoxy which held up quite well over the years. I used their re-coat primer first. Can anyone tell me what the paint chips are made of and why you would want to use them besides a decorative look? I don't think they are as strong as the polycuramine?

@LetsDriftMedia 2 года назад

Nice 12 years is a long time. And besides looks I’d would say the chips add a little texture to help with grip

@mikedodd9294 2 года назад

I've read if you grind the concrete prior to applying this product the bubbles appear. Better off using their sealer primer first and skip the etching/grinding.

@LetsDriftMedia 2 года назад

Yea if I were to do it again I would primer first

@ElleGee777 2 года назад

@@LetsDriftMedia .... or maybe not grind/etch it as hard? if that's possible?

@superdtx1733 2 года назад

wonder if the following steps are the better way? 1. use cleaner & degreaser 2. use RockSolid Garage & Concrete Primer 3. use rocksolid polycuramine garage floor coating

@mikedodd9294 2 года назад

@@superdtx1733 that is exactly what I did, used the Rustoleum Primer (not even sure it was RockSolid brand) and it came out excellent, I frankly think unless you are going to rent a diamond grinder the average joe is better off primering first then appling RockSolid. The stuff is just too finicky without it, and even with it you have to work quick. I think their etch cleaner is NOT enough to prevent bubbles and other issues. My overall opinion of the product is its OK, if I did it all over again I would do Shermin Williams garage coating, unfortunately I am in California and like everything else good is not allowed to be sold here.

@superdtx1733 2 года назад

@@mikedodd9294 🤣🤣🤣🤣

@ElleGee777 2 года назад

We've got a brand spankin' new garage - the car hasn't even gone in it yet. Do you recommend etching it? Also, what tools are needed? I figure: hose, bristle brush/broom; paint brush, roller brush w/extended handle; pail/bucket... what else? We got 2 extra bags of chips for our 1.5 car garage and got the 2.5 car kit.

@LetsDriftMedia 2 года назад

Ive read that etching is not required. Looks like you got all the tools needed, maybe some painters tape to mask off the garage wall near the bottom as well as paint roller trays and plastic tarp to prevent spills and latex gloves. BTW I only used about 1/4 of my chips for mine since I did not want the heavy chip flake look.

@ElleGee777 2 года назад

@@LetsDriftMedia thank you! i have painters tape, but did not get roller trays and it's suggested to just pour it out... not sure how we'll tackle it yet... I've seen it done both ways. Thanks again!!!

@SugeRealest 3 года назад

Amazing video haven't watched it yet but know it is going to be good

@aco3495 Год назад

Whats up man awesome video, I was wanting to put the clear coat Rocksolid on top however when I saw it was more expensive than the actual base coating I do not want to do it, kind of a three way question but my floor is a raw concrete, I am going to diamond grind it but do you think I need it is necessary to put primer and the top clear coating on after if I use the rocksolid product? Thank you

@LetsDriftMedia Год назад

I kind of wish I primered mine. But it’s still holding up fine. I would rec clear coating still to help with the longevity also if your going to be working in the garage a lot it’ll help.

@aco3495 Год назад

@Lets Drift Media thanks for getting back to me, is you had to chose one which is more important the primer or the topcoat, I just don't think the top coat is necessary for the rocksolid product line

@LetsDriftMedia Год назад

@@aco3495 I’d go with the primer I think so it sticks to the floor as best as possible. But if I could do it again I would do I would do primer and clear. Unless you don’t mind it not having a shiny finish. My neighbor didn’t clear his and it doesn’t look as nice.

@aco3495 Год назад

@@LetsDriftMedia thank you man i really appreciate going to take your advice

@lizamimi 3 года назад

He should have poured the product in a paint pan. He would not have used as much. Pouring directly from the pouches causes uneven application. Still looks good enough for me to try it!

@LetsDriftMedia 3 года назад

Yea that way may have been better but my concrete would have still absorbed alot of product I think. Idk but still satisfied with the results thanks!

@NIRVU 2 года назад

This video had me dying lmaoo

@LetsDriftMedia 2 года назад

Yea ill stick to working on cars... lol

@Bryson-510 3 года назад

How's the floor holding up? I'm going to get the same kit.

@LetsDriftMedia 3 года назад

so far so good but then again havnt really been working in the garage too often so its only had light foot traffic.

@markanders250 7 месяцев назад

Bro my back hurt seeing you use that grinder with the handle upright lol.

@LetsDriftMedia 7 месяцев назад

Tell me about it

@jiayingsong9348 2 года назад

when you applied the second layer on day 2 on the top of flakes, does it affect the final appearance? How is it doing now (after one year)?

@LetsDriftMedia 2 года назад

Didn’t affect it much besides seeing slight raise marks where you covered the flakes with the 2nd coat. But once you lay new flake hard to tell. I have a 1 year update on my channel.

@jiayingsong9348 2 года назад

@@LetsDriftMedia I have one more bag to apply second coat tomorrow. I read online seeing someone said for second coat you need to apply the whole garage not just several areas. My material is not enough to apply my three car garage again. Worried that will have different colors

@LetsDriftMedia 2 года назад

@@jiayingsong9348 should be fine. I re coated small areas in the video that didn’t get full coverage and you can’t tell after it all dries.

@christinavega3634 3 года назад

I was just going to say, doesn’t the handle tilt down. I use to be a custodian years ago and the buffer always tilted down, then I heard you say, it tilted lol

@LetsDriftMedia 3 года назад

yea I felt very very dumb after realizing.

@asiawilson570 2 года назад

What’s the product information? Color etc

@Cmatt1299 2 года назад

How is it holding up? Planning on doing this for my garage but worry jacks and jack stands will mess up coating

@LetsDriftMedia 2 года назад

Not bad. I put a 1 year update video up a few videos ago

@Cmatt1299 2 года назад

@@LetsDriftMedia ah I didn’t know thank you!

@winstonpham9806 3 года назад

I may have missed it. Did you use the etching that came with the kit?

@LetsDriftMedia 2 года назад

I did not, I saw alot of youtube videos that did not rec using it.

@jodyjennings8472 2 года назад

The edge in the kit did not bubble or fizz I wonder if it was enough or I need to redo it?

@natee2169 2 года назад

I think it looks better when you put a ton of the flakes on

@LetsDriftMedia 2 года назад

Everyones different, I figured a bunch of flakes would make finding dropped bolts/nuts more difficult. I am happy with it so far though.

@EM-fi2qg 3 года назад

I can really appreciate all your effort. I have a unopened box sitting in front of me that will be returned. $228.00 A lot of people have been burned on this product. I have used the old rustoleum epoxy with great results, but I'll be damned if I have to buy twice the product for proper coverage. It's too bad, they had a good product and had to ruin it.

@LetsDriftMedia 3 года назад

Thanks man and yea I really think they should rec you doing it with primer first. Theres no way a 2 car garage kit will cover the whole 2 car garage floor evenly. Idc what anyone says my concrete absorbed so much product

@Tatusiek_1 3 года назад

@@LetsDriftMedia i’m gonna use a primer because of this, so i dont have to buy another box of epoxy

@jodyjennings8472 2 года назад

Hello I would like some help please I used the etching that comes in the Box of Rock solid it did not bubble it did not sizzle it did not do anything how do I know if it worked enough?

@LetsDriftMedia 2 года назад

Maybe someone can chime in, I did not use the etching so wouldnt know.

@jodyjennings8472 2 года назад

@@LetsDriftMedia I actually looked online and you can make it much much stronger use less water and then it sizzled. My problem is I have a fiberglass coating on the top and Rust-Oleum said to use a moisture seal product and then use primer under rustoleum Metallica.

@jodyjennings8472 2 года назад

So I want to warn everybody that you always need more supply of rustroleum and they give you make it double or more strong when you mix the edge and if you have a garage that has a nice smooth feel to it you may have a fiberglass in it when the concrete was made in the end they told me to use moisture stop and use a primer under the silver bullet Metallica they said the product will spread easier and go further not requiring so much so other people may want to do this even though they do not say you need a primer you really ought to. So degrease clean well etch for some use rustoleum moistop use rustoleum primer then use your kit. 👍

@alfs3 3 года назад

how's it holding up a couple months later? any hot tire wear/peeling?

@LetsDriftMedia 3 года назад

Still solid but tbh I have worked much in the garage since its been so hot. And I only park the drift car inside here not my dailys so don't think I will have the hot tire pickup issue

@alfs3 3 года назад

@@LetsDriftMedia how many days did you let it dry before parking/moving stuff back inside? a friend of mine had his professionally done and waited 5 days to move back in and hasn't had any issues in like 4 years now.

@LetsDriftMedia 3 года назад

@@alfs3 i let it dry a week before putting any thing inside and 2 weeks before pulling a car in

@bestworld5959 3 года назад

I think it's not bad for the first time👍, after a year you need to paint again🤷‍♂️

@LetsDriftMedia 3 года назад

Thanks I may re clear it later on well see how it holds up

@blongsta5 3 года назад

Dang haven’t seen the E46 in a while lol

@LetsDriftMedia 3 года назад

your right lol

@alancalvitti Год назад

+1 home depot rant

@ghostpeppered4524 2 года назад

are you sure you gotta hold it like that? seems most other models have you comfortably standing with the handles at your hips. EDIT: oh you figured it out.

@nucoatresurfacing3153 3 года назад

Well done man. Those white chalky spots are called efflorescence. It can cause coatings to fail as it pushes them off. Fingers crossed for you though.

@LetsDriftMedia 3 года назад

Thanks man and interesting so far its been holding up but at the same time havnt been in the garage too much lol

@bobsmith1101 2 года назад

Are you concerned with the sun exposure that you have? I've seen other comments saying this is a problem. Funny, with the handle thing. I was thinking, boy that sure looks awkward, but like you said, " live and learn". Good job kid.

@aeromedical6750 2 года назад

The prep is 95% of how successful you’re going to be with this process. Failure to properly profile the floor WILL result in this product peeling off in a relatively short period of time. I purchased a home in which the previous home owner clearly rolled this stuff directly onto a smooth finished garage floor. It was already lifting off by the time I closed on the home and continues to do so. I’m having the floor professionally resurfaced as it’s absolute hot garbage to look at.

@JW-pj1zd 2 года назад

YA IVE DONE ABOUT A 100 OF THESE GARAGES, BY TRADE IVE BEEN A TILE SETTER FOR ALL MOST 30 YEARS, AND PREPPING IS THE MOST IMPORTANT THING FOR ANY PRODUCT,/PROJECT I WISH MORE PEOPLE LIKE YOU AND I WOULD UNDERSTAND THAT....

@MiniH0p 3 года назад

its not the concrete absorbed, its that the epoxy filled in the micro scratches from the machine.

@JW-pj1zd 2 года назад

DID YOU USE THE PRIMER 1ST ??, FOR THE BEST RERSULTS YOU SHOULD USE THE PRIMER, YOU WONT GET AIR BUBBLES, AND ALSO PUTTING IT ON SO THICK IS PART OF THE REASON YOU GOT BUBBLES, IM NOT A PRO PER SAY, BUT I HAVE DONE ABOUT A 100 GARAGES

@LetsDriftMedia 2 года назад

I did not. I wish I did tho. And yea we did put a really heavy coat on. 12 month update video dropping in 2 hrs

@davekelley801 3 года назад

Is clear coat really necessary?

@LetsDriftMedia 3 года назад

dont think it is necessary but I would recommend better to have more protection then not have it

@Lester-te3vb 2 года назад

Somebody please show him how to put the handle in the right position.

@LetsDriftMedia 2 года назад

Figured it out halfway thru

@groundhog8169 3 года назад

If you ask somebody a question at Home Depot it's like I get paid by the hour I don't know any of this stuff and I'm not going to answer your question that's almost how you feel

@peterdejoseph5197 8 месяцев назад

To may people rolling out the product. Take you time you have an hour to use the product. Looks good on camera

@LetsDriftMedia 8 месяцев назад

Looks good in person as well, not professional level of course but not bad for first timers with no experience with this type of work.

@peterdejoseph5197 8 месяцев назад

Lol the handle to the sander moves down to a normal position.

@zfilmmaker 2 года назад

According to reviews, it’s not a lasting product after all the steps. Your floor looks great but as soon as you park a vehicle with hot tires it bubbles.

@alexrcastillo1977 2 года назад

That handle adjusts down so its easier to control...... lol.

@LetsDriftMedia 2 года назад

Keep watching. I sadly realized midway thru 🤦

@alexrcastillo1977 2 года назад

@@LetsDriftMedia saw that. Lol. 🤷🏻‍♂️

@Hesam0000 2 года назад

I wish I had 40-minutes patience.

@n0nyabznss 3 года назад

@nick.nakai: ORTHODONTIST ASAP!!!!

@LetsDriftMedia 3 года назад

Huh?

@Cballin 2 года назад

this is why im opting for a professional installation. i don't trust myself not to mess it up..

@LetsDriftMedia 2 года назад

Was a pretty big process and learning process as well, overall satisfied, will be doing a 1 year review video, its still solid as the day I layed it.

@jimturtle6223 3 года назад

Nick Home Depot is told to not give specific answers to questions they are told to give options because of liability. Nuts I know.

@LetsDriftMedia 3 года назад

ohhh makes sense now, I was like wtf lol

@Tatusiek_1 3 года назад

@@LetsDriftMedia I used to work at Lowes, not Home depot, but they are pretty much the same. We employees really don’t know much about the products unless you ask a specialist in the store which are always very busy. We just get hired and get paid like shit. All we care about is finishing our shift. It can be really stressful because a lot of the time the store is under staffed and it’s hard to learn about every produce within a few days and explain it to customers. That’s why as a customer I try not to rely on store employees because I know that they are not going to give the best advice, sometimes they are helpful, but they are having a hard time and it’s best to rely on your own devices and just use the internet for the research.

@mikedodd9294 2 года назад

I've also read you should not use the antiskid.

@LetsDriftMedia 2 года назад

I would use some just sprinkle it when the final coat is drying dont mix it with the final coat like i did.

@mikedodd9294 2 года назад

@@LetsDriftMedia after 6 months of use I find the flakes provide a bit of traction, I couldn't imagine not doing the flakes, it would be a an ice skating ring if it gets wet.

@LetsDriftMedia 2 года назад

@@mikedodd9294 yea I’m actually glad I put a bunch in the front 2 squares since that’s usually where water or fluids end up.

@AxialMotorsport 3 года назад

LOL your boy Zach has a strong resemblance to Machine Gun Kelly!!

@manriquezavala9938 Год назад

What rocksolid doesn’t tell you is that you are to put a coat of primer first, to avoid all those rough patches, second you used the wrong clear, the clear you used was for epoxy not for polycuramine, they have their own clear.

@LetsDriftMedia Год назад

Right on! So far no issues next time I would do things different.

@Mike-ff7ib 2 года назад

Home depot workers are not experts, they are just everyday individuals who work there. Once in a while you might get soneone who might of had experience in the field, but most are just average joes. About the only question I ever ask is where can I find product "x" ? I never ask for advice about a project I'm working on.

@LetsDriftMedia 2 года назад

I get that. Just thought the tool rental department would have at least some knowledge of the tools they rent out

@RofikJohanChenel123 3 года назад

Halo frend

@turbosupra2jzdragracingtob249 Год назад

They raise the price…now less expensive to have professionals do it.

@zoomx4143 2 года назад

Haha, I agree with you.some of home Depot employees really are dumb..

@edwardduran4354 10 месяцев назад

i feel ur pain I just did mine. i’m very anal with my stuff too no one else will notice but i’ll know ur garage came out great though

@LetsDriftMedia 10 месяцев назад

Thanks man. Yea at the time I was kinda bummed with some of the little defects but now it’s whatever still looks great and hasn’t failed me yet.

@zfilmmaker 2 года назад

Sorry, watching you run the floor buffer was some funny stuff. I hate to say you’re doing it wrong but you are. You have to tap the little tab at bottom of the handle to lower it. You can’t control anything with it upright. If you tilt the buffer slightly to left, it goes right and visa versa.

@LetsDriftMedia 2 года назад

Yea watch a little longer and you'll see i realized at the end lol

@zfilmmaker 2 года назад

@@LetsDriftMedia I will, I was watching and then got a call. The end result looks amazing…I’m hoping to do the same but are not sure if it’s worth it. I prefer the swisstrac wood looking snap tiles from Obsessed Garage but that’s a considerable investment to Rock Solid.

@LetsDriftMedia 2 года назад

@@zfilmmaker yea I considered the obsessed garage tiles but really loving the look of the rock solid. So far bee holding up great even after multiple fluid spills

@zfilmmaker 2 года назад

@@LetsDriftMedia what about hot tires? Has it bubbled at all?

@LetsDriftMedia 2 года назад

@@zfilmmaker i only garage park my 240 so havnt gone on any long drives to re Park it and see.

@Gmoon917 4 месяца назад

😂

@Nick210 3 месяца назад

Looks like you probably spent close to 2K or more in total on this. You would have been better off having it professionally done for not much more; you’d have saved your time and frustration and had a warranty.

@LetsDriftMedia 3 месяца назад

Maybe but youtube pays me every month for this video, I think the profit I get out weighs my frustration and time spent doing it myself. It was also a great learning experience.

@TH07SP 2 года назад

Man, they should really explain how to use the tools. What a safety concern here you go rip your arms off! I just did mine 2 days ago. These machines are super easy to use once you actually know how to control them. You lower handle to waist height. You don't fight it to make it move. You actually push down and it will move left and when you lift it moves right almost zero effort as long as you know that. Reason they should explain it to you at the store.

@LetsDriftMedia 2 года назад

Yea as you can see i learned the hard way lol

@armandoaguilar4220 Год назад

Call a professional… Your welcome!!!

@LetsDriftMedia Год назад

No thanks

@groundhog8169 3 года назад

I have to laugh at what he says about Home Depot because it is so true the Home Depot that is close to my house is the worst Home Depot in the world I hate it they finally built a Lowe's about five miles away and it is like night and day difference between the knowledge of the people the cleanliness of the store and everything I do not like Home Depot

@drewnc6196 2 года назад

Just no to the upright handle for the buffer device, that is so ignorant. In the Navy, we used these things in bootcamp to keep the barracks clean and also on the ship. It is not rocket surgery. You need to understand how your tools work.

@LetsDriftMedia 2 года назад

Cool story bro.

@ChuuckKnight Год назад

So, how is that floor holding up now bro?? I'm about to do this to mine, thanks for the vid.

@LetsDriftMedia Год назад

Still great. I did a 1 year update video to show how it’s been holding up then. It still looks the same as that 1 year video.

@deborahknotts6462 2 года назад

Great video! But, All of the foul language was totally unnecessary and offensive. Your floor looks great!

@LetsDriftMedia 2 года назад

Sorry mam and thank you!

@JSLEnterprises 2 года назад

Whats crazy is everyone that buys the kits uses the rollers... you look at videos of pro companies that do this like.. they all use squeegee's Also, your clear coat wouldnt spread and looks grainy because of the anti-skid additive.

@LetsDriftMedia 2 года назад

Yea I was debating using a squeegee too after seing more contractor grade videos using it. Still came out great tho imo.