Safer, Stronger, Longer, Motorized Bike 

The invisible sidecar lol

You almost got a dream bike in your hands, she looks great and seems hella fun. It looked like you were flying on there. What ever speed you were going actually looked like you were going it.😉😁

Those wheels look super beefy. At first glance, I thought they were old school motorcycle rims with drum brakes! Bike looks like a ton of fun to ride

I found an abandoned bike it the woods and scored a pretty nice seat and seat post cargo rack/ bag and a tire and tube. Normally I would leave it but im broke as f rite now so i was stoked.

I love those rims, reliability is priceless.

Looks like it is more fun to build than ride. Good job.

Those rims and head are so beautiful.....great work!!!

LA Hover always a good watch your videos , very entertaining !!! I'm looking forward to you leaning out the engine to its potential performance and hold the F .... on ! a comparison between my basic ported performance engine that i sell and the basic ported performance engine Smallik sells would be entertaining if anything

Entertaining as always my friend. The progression of your builds and your Channel have come a long way. Keep up the great work and thank you. Have you ever weighed your builds just curious?

That Smolik head looks like a beefed up clone of a Yamaha DT100 cylinder head from the 70's. It is a great design.

I’m a new guy n just subscribe, I got 1 coming in the mail anytime now, first build n can’t wait,,luv your channel n going back through watching all your videos,,Thanks man!!

Nice 👍🏾 😎… hey that’s crazy I just got the 212cc to n phantom 85cc😚great mines think alike lol

Thanks a lot for the videos! I watch your videos more than any of the others, just because I feel that you give an honest opinion on whatever it is you're testing, weather you liked it or not.. You have sold me on more products, your videos have, then anything else or anyone else.. Thanks again!

great video as always

Switching to a B7HS plug should make the engine run cooler, especially thinking as you run a high performance cylinder. I even use B8HS for my 60cc moped as it runs very hot. It is safer running colder than hotter, but it might make it a little bit harder to start.

i have been waiting for this video, and the motor looks really powerful almost like a dirt bike motor powerful

14:58 Pure Enjoyment!

Sweet vid as usual,, thanks man

That is a really nice looking and purring bike.

#1 An air scoop for your cylinder head, to help cool it would be pretty easy to build..... #2 The Gemini wheels look high quality (some oval spoke washers for the rear wheel would help make them even stronger) #3 I'd love a 26in steel, full suspension frame similar to a motoped with those Gemini wheels for a build . #4 After paying $75 for the larger "Nasty Jack" expansion pipe, I wish I would have bought the smaller $45 ex. pipe instead. One $45 pipe I seen did have a smaller header tube ID & belly but much better welds & no kinks or obstructions in the header tube bends for better flow & it's probably also lighter. The other $45 chrome pipes had kinks in header bends & worse welds. The $75 "Nasty Jack" pipe does have a larger header ID (& larger belly) but is all crooked, poor welds, with obstructions inside that won't help flow. Plus it's on the heavy side, I'm gonna have to bend the piss out of it to make it fit & hope it works. VS $45 pipe, that I might also have to bend but would have more clearance around the gas tank. In hindsight, not all the $45 expansion pipes are the same but I really wish I would have bought the black one with good welds & no kinks in the header.

Hey LA.The best way to find an airleak is with carb cleaner.Just spray it on a suspected leak area and when you find the leak the rpm will rise noticeably.

Build number three under way. 26inch Hyper cruiser stock pk80 cylinder and bottom to start and it is damn clean ports all around. Head has 3cc added to it as I reshaped the dome then full polish and plane and mounted all up. Catalytic converter into 8 port copper glass pack. 32t sprocket coaster mount cnc (had to try one). Triple tree suspension front end heavy CNC riser. Wide set bars. Still waiting on disc brake set. Stock tank. This one will be shall we say somewhat refined compared to my past two grip it n rip it builds.

Love your videos man, you inspired me to do my first build ever the other weekend, I got the seeutek motor kit and the install was a learning experience but everything came together nice. Haven’t fired it up yet as I have a steady leak coming from the carb and ran out of spare time, hopefully will get her going this weekend and take my first ride!

Heavily entertained, siked for the next update on this build!!

Great video! I've been thinking about pulling the trigger on those wheels. But damn you've sold me! Have you seen DLH 127cc engine pre sale? I've never found forks for bicycles with mounts for dual brakes. Funny how a normal bike can do stoppies on rim brakes, but as soon as you add a motor they're basicly useless.

Great video bro love the bike looks great keep up the great work bro

I mainly watched the video for the rims as I think I'd like a set, but you damn near have me sold on the minarelli "I spelled it wrong I know" I bought a 212cc Predator last year sometimes with plans to build a motorized tricycle, but I'm thinking about just slapping it on the phatmoto at this point 🤣

Another thing if you are having issues with temp and tach you need a resistor plug or ngk resistor cap. You want a colder plug. We recommend an ngk br7hs or br8hs especially when temps get hot out

Amazing video. I love that you did coverage of the gemini wheels, i've had my eye on them for a while. Are you using the zeda 80 bottom end on that motor?

Dang. My man is riding with the deuce deuce.

Thank You for this very informative video, please keep giving all of us more like this!

Nice wheels

This video is literally coming out at a PERFECT time for me! As I’m currently just looking into different wheel sets for motorized bikes. This is mainly because my current rear wheel has a quick release skewer to mount/ dismount the wheel on the frame. It does have a disc break hub so I was able to make a SOLID sprocket mount with it so I do definitely want to use it on my bike for more reliability than a clamp on adapter or rag joint. However, my main concern is that I literally have just that thin little tiny rod that’s holding all that weight and vibration. This is probably why I haven’t yet seen a single one of your bikes with a quick release but I still would really appreciate your input here. Do you think a quick release is a cause of MAJOR! concern on a motorized bike? or can it be left alone until you figure something else out? I do know it’s definitely not something to use for the long term but for now I’m not too sure what else to do, as I don’t think I can use a thru axle on a quick release wheel nor can I thread a bolt on axle through it as a quick release skewer has a much smaller thickness than a bolt on axle. Other than buying a Gemini wheel I’m not sure what else I could do. Any and all input you have on this would be MUCH! appreciated. Thanks so much!

You haven't seen real power until youve tried a Piaggio!!! Jk great video! Thanks for the review, good or bad I always love the input. Looking forward to your future content!

Love the new build

The wheels look real nice, aswell as the bike! Keep up your work! Imagine if you put a 44 tooth sprocket back on that bike, wheelie popping machine?

I have some fooker pedals on my normal bike and i love them. They look and feel nice, and they grip really well and are strong. The bearings are also incredibly smooth. They also clone raceface chester pedals

That is one sweet bike! Did you ever think about doing a 212cc build?

Beautiful quality wheels 😮🤟🙏🤠

Surfas Drifters for tires.. great wear life and great price.. Kevlar reinforced..

Nice build. Looking forward to an updated video. Why didnt you talk about the wheels? Where did you get them?

id love to see a 28 or 32 tooth on this after some good breakin time and jetting

You haven't had power, till you hop on a running motorized bicycle. 👍

Hey. I love your vids. Do you remember about how long the O ring in the smolik head lasted for you?

I hope Darcy doesn't get "upset" over this. Good luck!! Great video! 👍Sometimes you have to see what's best for YOU. All of these set ups have their pros and cons. Also depends if your out for speed, or dependability.

,,,,diggin it..........Out on that road you appear to be at a speed of 40 mph......cool..................

Gemini Wheels 💯, can't beat them 💯the best

Kings motored bikes have offset engine mounts to give you alot of chain clearance

I have Gemini wheels that I am running with a set of Serfas Drifters 26"×2" and they work great and are just over half the price of the hookworms. Also running a 203mm caliper in rear with a QM9 adaptor and can't got much bigger on sprocket but atleast the Minarelli has enough power for the 36t.

Nice!!

Sounds like a 125cc and Sweet.Glad you found some awesome wheels for all that power.AFV is for the vids where you just rip the spokes out of a standard rim while punching the throttle,but we'd get a chuckle here too.Rather see you safe though.Thanks for the great info.Happy Trails.

Fooker pedals r nice for the price 14-25 can't beat it it grips

i wanna build a 50cc 2 stroke bike

@LA Hover could you at some point go over this bike and do a part by part list with links? I'd very much appreciate it.

Hove that joint sounds nice bro👍👍 hey do u know of any plug and play 52 or higher jug set up for the yd bottom ends

Im stuck inside with a bunch of wires glued to my head and i cant get farther than 10 feet from a lab top. I look like a genie or Laurence of Arabia. One more day and i can go ride. My replacement bt 100 hasn't blown up yet after 4 tanks of fuel. I think im just gonna stick with 20:1. I would pay $400. for a reliable motor but $270. Should get a motor that makes it past break in period. Talkin to you bikeberry

Yeehaw! She looks nice on those Gemini rims man. After she opens up I'm interested in whether 55 mph is possible here. Yd100 is running. Got a MZ65 clone on it now. Sounds good albeit a little loud for town riding. 110 revival, please? I saw a guy put a 090 Stihl on that bottom end. Might be an interesting vid idea.

Check out surfas drifters. They are one of tge best tires you can use for tge street. They are made from kevlar and are very strong. No chain clearance issues.

Slacking the clutch spring but no watch not and no wash bolts ok 👍.

That set up u have l.a is bad ass sounds amazing

And tight lock the clutches bolts them,ok?

Want one of these for my CDH Gasbike, which seems to be going through back wheels, damn thing ain't even broke in yet and I'm already on my 2nd wheel...only trouble is the Gasbike's set up for 24" wheels, and I can't seem to get an answer as to whether or not the maker does these in 24"...suppose I could just get the hub, and have a bike shop here lace it up for 24, but that's just added cost...or convert the bike to 26". You had said previously the wheel takes a 300 size tire I think? Pretty sure that's gonna rub the sidewall...maybe get the hub like I said, and have my guy lace up a 24" steel rim for a standard sized tire, and just eat the cost of that...hmm...

i got a light setup using a bundle of laptop batteries my nefew made a 12v basically smaller then a fist running 12v lights i havent had to charge them yet and i have had them 2 weeks

Hi my friend. How much is this one gonna cost me? Bwwwahhhaa! That is a beautiful bike .Any chain stretch?

Hey bud so I'm get my gemini back rim soon just wondering if you had a video of you putting the gemini rim on step by step

When you first reviewed the Phantom 85, you said that was the most powerful motor you had felt, stock or modified. How does this one compare?

Stock China doll sparkplug replacement is NGK h6 or what..... I know very little but pretty sure my original is comming to its end

We need a copper head

lol alot of drama in the comments lmao Stir up that POT love the build black and blue stay true

You should have bought a "PhatMoto Rover" for $999'00 and all you had to do is change the motor 4 a 2 stroke... All the parts are heavy duty built for just that reason to ride on or off road...

No chain tensioner right ? And total inve$ment thanks Ray from North Dallas Tx..

Thanks to you mr la hover for your review on the Gemini rims I would be saving to buy a pair at 350.00 .right now I’m watching the economy of my island because I see a few price hike over the past weeks and maybe I would have to help those with less . No worries I specialise in survival 😎. The ported cylinder and head is impressive running that good during braking process you and I know that is twice the speed after braking in is over safe ride on which ever bike you’re riding .i just learn a lot thanks again

I’m pretty sure the point of not letting the cylinder heat up the carb is because the colder the air is, the more dense it is which means u can get more air into the engine. I don’t think it will change much to do with getting colder fuel to prevent overheating. That is definitely an added bonus but the effects of that will be extremely minimal

I would like to see an update on the phantom 85.

I'm thinking about getting or making a motorized bicycle. I would do more pedaling than motoring. Do your legs hit the motor or gas tank when you pedal?

its the g2 reed it needs port mached

I wish the gmini rims had Greese ports for added life

What tires did you end up going with for the Gemini wheels?

Do you have any bulids selling..ill check Smolik to see if he has. Looking for something similar to this maybe

Can you put gein wheel on bike with more than one gear

Hey Quick thought! I'm wondering if you should pop that rear disk brake on the other side of the hub so that oil from the chain won't get on the rotor! That would make the brakes squeak pretty loud.

What is the link to this discord server? Is it still active? Even if its not I would love to be able to search through for answers.

Cool as shit 😎

How did you capture that footage? First 5 mins in? A guy needs to know

I live somewhat near you, I'd love to contact you in possibly buying or trading for some of your spare parts. I've followed you recently in the last year and have been binge watching your videos in the hopes to motorize my 60s model Schwinn I got from my in-laws.

A hub on a wheel with speeds?

TOP SPEED RUN WHEN?!?

Hey there I have a question do those CDIs that come with the regular 80cc bike kits burn out easily I've bought two bike kits already and there burned out on both of the kits

We’re can I get the Gemini rims

Minareu makes an insulator thst goes in between the carb and intake if hest is an issue. I guarantee he is not an issue using an insulator and intake leaks are pretty much non existing. You are using a vm18 . What pilot jet are you using?

Where you get the handlebars for your bike I got the same fork from the zero gas tank frame and I'm looking for handlebars

Noice!

can i ask what this entire setup has cost you

Were you get the motor from I need one that’s fast

I love your bike but mine keeps overheating i have a stock 80/66 cc idk what head i can buy i cant find any in the nederlands

Just wondering why your running that scooter pipe and not the mz, after all you said the mz out performed the torpedo scooter pipe a video or two ago. Just curious.

Top speed

Maybe I missed it, but what was the top speed?

Hey Hover, Why does my bike squeel when releasing the clutch during acceleration? I think the noise is coming from the clutch arm and ball bearing not being greased. Thank you, Even

No thoughts of ever messing with a trike?