Samurai Build (Part 6) Front and Rear Differential Disassembly

Подписаться 14 тыс.

Просмотров 26 тыс.

50% 1

DISCLAIMER: This is my first time working with Samurai Differentials! If you're planning on using this video as a guide to do your own, do so at your own risk!
Taking apart the differential is really easy. The important part for me was marking the alignment of all parts prior to disassembly. I went a little overboard when marking because I didn't clean off much of the gear oil and thought there was a high probability of the marks being rubbed off. The Ryobi 1/2" Impact Wrench was a huge help, as I didn't have to break the bolts free with a wrench and hammer; the shock of the Impact turning on was enough to get them loose.
Amazon Associate Links
Yellow Paint Pen: amzn.to/2vUIas0
Ryobi 1/2" Impact Wrench: amzn.to/324IRum
Stickers & Apparel: teespring.com/stores/fortune-...
Follow us on Instagram:
@fortuneoffroad

Авто/Мото

Опубликовано:

27 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 28

@Kamikaze_Samurai90 3 года назад

Great videos, been working on my samurai 12 years, just picked up my second samurai jx se, very nice to refresh my knowledge and check out other people's tips and trick, one suggestion about the videos, the music is too loud during the points where you talk.

@terrycahill8362 2 года назад

Today put a Spartan Locker in my rear differential and your build videos were most helpful. Will be tuning into your channel for tips! Thanks...

@FortuneOffRoad 2 года назад

I'm glad that helped. I literally just test drove the Samurai with a new Spartan I. The rear today. Do you hear a lot of loud pops with yours?

@terrycahill8362 2 года назад

Just put the locker in today. Waiting on brake parts and bearing kit before I can wheel it. Guessing it will pop some. Will let you know👍

@terrycahill8362 2 года назад

Getting back to you on my rear Spartan locker install. Finally got brake parts, bearing kit. Put it all together and got a short test drive in. Definitely got some popping on turns especially in low range. Not as noticeable in 2wd or 4 high. It is nice to have the added traction. Planning on a front end axle upgrade and will put a Spartan up front as well. Are you happy with the Spartan Locker up front? I have Yoda power steering so guessing it will work for me🤔

@smathet7766 Год назад

I’m a journeyman mechanic and OCD when taking things apart isn’t a bad thing. Use a center punch when you mark bearing caps and what not. They don’t wipe off.

@FortuneOffRoad Год назад

That's a good idea, I sometimes do that too!

@brynjones1961 3 года назад

Can't watch it for the music

@davidcraft4909 4 года назад

after watching that blazer I kinda think it would be ideal to have a spartan or lockright front and back. I currently run a minispool in the rear and an open diff in the front. and talking to more experienced people than myself they say mini spool in the rear and mechanical locker in the front is the best setup. I'm currently about to setup my cousins samurai like mine. anyway i just discovered you channel and I see a lot of interesting videos because we are doing similar things to our samurais.

@FortuneOffRoad 4 года назад

For off road only its hard to beat spools front and rear, because of their reliability and performance. My first time driving the Samurai with the spool in the rear, I instantly noticed the reduction in turning radius. Also, look at the tire marks left on my driveway!

@davidcraft4909 4 года назад

yeah I understand and thats why I have a minispool in the rear and im setting the other sammy up the same way. mini-spool has no moving parts. I'm not a big fan of lunch box lockers but it seems to be the only option. theres a russian made torsen style diff for like 600 but the application doesn't match up it says 86-95 but said like 28 spline axles and i don't think you can return it. it doesn't add up, then theres the 1000 dollar arb. just for the diff carrier so yeah spartan locker in the front.

@audiarybramastaherlambang6511 3 года назад

What rasio of your final gear ? Thanks for you video, that very help me for build my samurai (in indonesia samurai name is jimny)

@FortuneOffRoad 3 года назад

Stock in the differential, 3.73. 6.4:1 in the transfer case! 🤘🏻

@audiarybramastaherlambang6511 3 года назад

@@FortuneOffRoad wow that very low, because in indonesia, stock defferential is 937. Thanks btw👍👍👍

@foowanwing112 3 года назад

I am very interested of this vedio, but the problom is how am I to get all these parts, accessaries for the rear axle of Suzuki Jimny SJ413, I am from Malaysia, please give me some information, many thank.

@FortuneOffRoad 3 года назад

@@foowanwing112 You can try the same companies listed in the description and see if they will ship to your address. 👍🏻

@v26224 2 года назад

would it be possible to retain the factory 22 spline side gears up the front with the spartan locker?

@FortuneOffRoad 2 года назад

The product page says its gonna good for 26 spline side gears, sorry.

@rubenflores2937 2 года назад

Powertrax lockright 1510r fits front diff with 22 splines

@naturesounds68 4 года назад

Nice video's. I have an '84 samurai. I also want to rebuild it. I have more engine problems and my chassis is broken, because the previous owner didnt lift it right. Any tips for that? ;)

@FortuneOffRoad 4 года назад

These engines can be tricky. I would recommend asking specific questions on the Samurai 2.0 Facebook Group. They were a lot of help to me!

@naturesounds68 4 года назад

@@FortuneOffRoad thank you i send them a request!