Saving the Punto from itself - lashings of rust protection!

Подписаться 98 тыс.

Просмотров 16 тыс.

50% 1

What do Mk1 Puntos do? They rust. So to save the Oldest Punto in Britain, it broken out the grinder and wire brushes and many litres of Bilt Hamber under body protection to try and stop this car dissolving!
Join this channel to get access to perks:
/ @furiousdriving
Call Lancaster Insurance Services on my number 01480 400771 to see what you can save on your cover
Head to bit.ly/BiddingClassicsFuriousD... to find great classics for sale!
Proudly sponsored by Diamondbrite - Clean, Protect and care for your car - diamondbrite.co.uk and get 10% off your order with code FD10
Check out my Amazon store for all the Draper tools used on the channel www.amazon.co.uk/shop/furious...
Theres a Merch store!! Head over to www.furiousdriving.co.uk to find the T shirts, hats, mugs, key rings, badges and more soon on there!
All the other Furious Driving, Rover, Alfa stickers, mugs, T shirts HERE - rdbl.co/3AhvDLL on Redbubble
Hit the Channel Member JOIN button and become a Furious Driver or help support the channel on Patreon here: / furiousdriving
Post me stuff for Junk in the Trunk post bag section!
Furious Driving
PO Box 477
AYLESFORD
ME6 9LE
Check out my new Photography channel 'Click Bait' - bit.ly/2Xek1Y1

Авто/Мото

Опубликовано:

18 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 171

@robterry1663 Год назад

Bilt Hamber do a great rust removal product called Deox Gel. Brush it on to rust, leave it overnight and the next day rinse it off, nice shiny metal! Great for hard to reach bits and saves a lot of wire brushing!

@twentythree_ Год назад

Good effort here Matt. Bilt Hamber products are great but having used both Dynax UB and UC on plenty of projects you really need to make sure all loose flakey rust is removed by knotted wire wheel, abrasive disc or blasting before application. These products are effective at treating/slowing surface corrosion, but deeper pitting such as that visible on the rear suspension beam and arms, drum backing plates, springs, brackets etc indicates deeper ingress of moisture and delamination of the steel which can't be stopped using a surface treatment. In the longer term, the only way to properly address the body rot is by cleaning back to clean steel, etch priming, stone chipping, painting and then applying protective wax. Keep up the good fight!

@davebolowski7925 Год назад

Jeez your neighbours must have the patience of saints looking at all that crap you’ve got making the place look untidy 😂😂

@ZGearbox_AT Год назад

This Punto reminds me of my childhood- in my family we had two of them, a 3 door 75 ELX but with the same color as yours and an absolutely base spec 55 5 door and they were lovely little things. The 75 is long gone but the 55 is still around to this day (gave it to a friend) and it still marches on! I adore that yours is getting some well deserved love! Cheers!

@user-xd9yo3le7o Год назад

Matt, informative as usual. Just goes to show that patience and planning are so important. Congratulations on a job well done.

@DeGlennen Год назад

Love these kinds of videos. Very informative. It really makes my hands itch to give this a try on my Peugeot 205. I reckon it would really benefit with a bit of rust proofing.

@lukevibertuk Год назад

👉🏼😬👈🏼 the sped up wire wheel grinder segment is like a session at the hygienist!

@richwilliams9895 Год назад

Bilt Hamber whilst better known for their rust proofing products, they also do really good car cleaning stuff, like snow foams and their waxes are really good.

@stephen_graham Год назад

loop some carpet round the bottom rung of the ramp and they will not slide away when trying to drive up them

@johngriffiths3394 Год назад

That's a really satisfying job - I remember doing it on son's old cars, buckets of Hammerite! Lovely car and such a rarity now!

@j.b.w. Год назад

Do you get aches and pains the day after a job like this? Occasionally contorting myself under the car doing these sorts of things I notice the day after in the muscles.

@furiousdriving Год назад

not too bad, mostly bashed elbows

@69Phuket Год назад

Just get on with it. The human body can take strength from any activity. It's actually amazing! We regenerate every day. Gets slower as older you get because natural selection tends towards the young ones. Tend to think them disabled badge folks should just do some exorcism of their perceived ills and free up car parking. (K. I'll shut Up)

@maxidyne Год назад

Great job Matt, you saved the Punto! Horrible to do but in the end it gives a good feeling doing jobs like this.

@andypicken7848 Год назад

You have done a good job there Matt. The finished result is a credit to your hard work

@danielrussell446 Год назад

Well done Matt another great yet messy job on the punto but will protect it underneath hope you manage to sort that rust on the back wheel arch it’s well worth saving and knowing you will end up being a very nice car looking forward to the next one! Daniel

@grayfool Год назад

Good job. To stop your ramps moving, cut a couple of peices of shhet steel the width of the ramp and bend one end so it hooks over the first step on the ramp. Then the car holds the ramp in place while you drive up on to it.

@jamesmurray3399 Год назад

Put rubber floor mats under the rampy things.

@owensteele1645 Год назад

Products made by Bilt Hamber Laboratories are hard to beat in terms of rust-treatment. After thorough preparation, I sprayed the Dynax UB on the rear beam, suspension coil pans and anywhere I was finding surface rust, on the 15-year-old underside of the family Polo. But that was during our first lockdown, over three years ago. Due to washing weekly, driving economically, and keeping on top of the maintenance, the Polo is still very black and clean underneath.

@marzocchi705 3 месяца назад

Some Deox-Gel and/or Hydrate-80 would have been great to use before the dynax. I'd personally have used electrox on the areas you took to bare metal too and is what I plan on doing to my Golf. BH stuff is excellent

@Jay-B1750 Год назад

Love Bilt hamber products I flooded the sills of my Puma with it when it had some repairs done

@habsom1406 Год назад

Ahaaaa'choo! I think I have sneezo-vision, all that rust dust is making me sneeze Matt! You've certainly extended the life of that rare Punto me thinks. Interesting camera shot displaying your other car also jacked up, we have a theme going on here! I admire your tenacity, it's not easy rolling around on hard tarmac under a barely raised rust cloud.

@alansimpson835 Год назад

A very sound idea. Such a shame they rot do badly in floor pans as the bodywork seemed to last pretty well, apart from rusty tailgates from memory. Bet it will be a popular exhibit at FOTU

@nickhaag7803 Год назад

To drive up ramps like that cut a couple of long strips of carpet the width of the rungs, fold in half and wrap around the bottom rung then lay it out towards the car. They can't slip until the car is past the first rung and by then the weight of the car should hold it. Also if it has kick plates in the door openings, remove them and drill a hole into the sill so you can get the rustproofing extension in. Don't bother plugging the holes, they're covered by the kick plates and will allow a little air flow which is good.

@furiousdriving Год назад

no, there was surface rust under the the old underseal. so taking it off stops it rusting under that unseen, and Ive only taken it back as far as good metal and paint, then coated it with UB which is a rust neutraliser as well as a covering

@nickhaag7803 Год назад

@@furiousdriving ?

@furiousdriving Год назад

@@nickhaag7803 sorry, that reply posted on the wrong comment..

@nickhaag7803 Год назад

@@furiousdriving I have fingers like that after a long day too!

@scottishcarenthusiastsandtrain Год назад

Great little tinkering video Matt, you have reminded me that i need to do the underside of my Cactus before the summer is out.

@furiousdriving Год назад

yes, get it done while its warn and dry out!

@chrisrand5185 Год назад

That's a job I need to do on our 94 Punto Cabrio. Thankfully, it is not quite at that stage yet. Hope to see you at FOTU.

@richardhunt1384 Год назад

3:37 only crap because you haven't put two lengths of rope on them which you then put under the other set of wheels and when driving/ reversing will pull the ramps into the wheels being driven up. Been using this method for years and it saves tons of grief trying drive up shifting ramps.

@adamlawson8752 Год назад

Love this sort of video, nice to see a car brought back to life

@highbury1972 Год назад

Cool Matt!! Much respect to you for the hard work. One day you will have a full hydraulic ramp to cut the work hours down.

@usuallyfixingtinkering Год назад

This is a great video because... as someone who has done this procedure with various products over the years (now I stick with dynax UB or UC) filming is the last thing I want to be doing, but it has to be done, mucky tripod and camera lense the lot. Great video and the Punto looks amazing, just goes to show how good a decent day of work underneath makes all the difference :)

@furiousdriving Год назад

It is a grim job, but so worthwhile at the end

@usuallyfixingtinkering Год назад

@@furiousdriving always!

@RichieRouge206 Год назад

You’ve done a great job on this fabulous little Italian! Bilthamber is awesome stuff by the way! I’ll be there at FOTU with Tom and his Alfa.

@tjshill82 Год назад

Saab.. Oveur

@Danthecapriman Год назад

Nice job on that Matt, looks much better but should help keep the car rust free for some time. Dynax is fantastic stuff too. I’ve just done exactly this job on my Capri and yank tank! I’m a glutton for punishment though so I do it on hot sunny days which makes the wax extra thin and lets it soak into panel seems and gaps. Hot smelly dirty work but well worth it! Just got my Volvo 740 to do next… Keep up the good work though, can’t wait to see more on your Crown Vic (maybe that’s a good candidate for more Dynax wax in the future!).

@fhwolthuis Год назад

Great to see some Punto action. It is pretty rough around the edges but it is worth saving ❤️😀💪🏻

@ammo1g Год назад

Great video pal, ashame you couldn’t dry iced it first then rust converter then that bilt hammer, it’s costly but defo works in preserving, until next time 👍

@EVguru Год назад

When straightening bent metal, you want to avoid creating any more stretch than has already ocurred. Work in stages from the edges of the damage, NOT the middle.

@Phiyedough Год назад

I live in Croatia where it is difficult to get things like cavity wax. On the other hand, vehicles don't seem to rust quite as quick as in UK.

@Eis_Bear Год назад

For a moment I thought that was a can of expanding foam in the thumbnail, I hear you can do good repairs using that.

@histriamagna1014 Год назад

I can't believe what British weather can do to a car. Here on the Adriatic coast they last forever.

@georgepom328 Год назад

Tbh it's not our weather that rots our cars, but we salt our roads in winter

@BRED510 Год назад

Also don't forget that car is nearly 30 years old. It's pretty good for a 30yr old UK car, especially a Fiat.

@histriamagna1014 Год назад

@@georgepom328 That's what I was thinking about

@royfontaine5526 5 месяцев назад

@@georgepom328the weather certainly doesn’t help, but yes it’s mainly the salted roads 😟

@phil7301 Год назад

Matt, that looks a good collection of cars on your drive, apart from the Tomcat, those are my favorites 🏴󠁧󠁢󠁥󠁮󠁧󠁿👍

@jamesmurray3399 Год назад

Looks good in black. Also recommend use wd40 specialist spray grease to give light coating of exposed metal bits. Works great to keep rust away. Just top it up once a year.

@Mark1405Leeds Год назад

Back in the seventies having the underside spayed with old oil at each service was common. Worked well but I imagine it's banned now!

@SKATERMRJM124 Год назад

You should 3M stone chip at its factories, where to do it and use the cover wax it works inside the holes of the car on the body car 3m seam seal clean all the services to buy metal and it works really well factory on the body car

@jameskyle380 Год назад

Underseal my 1996 Volvo 940 every 2 years. So far in it's 208,000 miles only needed a small patch welding on the drivers side rear outrigger.

@paultaylor9652 Год назад

No one could fault your dedication to this wee Fiat Matt. With the wheels being quite corroded I wonder if Fiat 500 steel wheels would fit.

@simoniluk182 Год назад

They do but the elx trims don’t fit over then as the profile of the wheels stick out more than the punto steels

@rgorham99 Год назад

Top work to keep this survivor going as long as possible

@anthonystevens8683 Год назад

Nice one Matt. Spending time and effort to keep this car on the road not just fir a few months but years is commendable. Great work and many thanks for sharing. Take care.

@rogerhanbury677 Год назад

Have you ever used lanogaurd , I need to protect my Mazda eunos before it dissolves and lanogaurd looks very easy to use

@furiousdriving Год назад

Ive seen the ads and people like it but I know this is quality stuff

@GentilsGarage Год назад

Dynax has always been my product of choice too. Great work. See you at the FOTU!

@furiousdriving Год назад

look forward to it, what are you bringing?

@GentilsGarage Год назад

@@furiousdriving finger cross, the E12 will be ready. Finishing braking and cooling this week.

@andrewthompsonuk1 Год назад

Wow, that's a huge effort. I am lazy, I give all the rust a quick spray with something like Comma Release oil or even WD40 then with some thick gloves I smear a pot or two of Copperslip over everything that's rusty. Then inspect and repeat on areas where the rust has fallen off a few months later. After the first year, only yearly inspections and touch-ups are required. Mud traps can be treated with engine oil as dried mud and oil make a good rest preventive, I treat inside sills and box sections with wax if they look perfect inside otherwise they get oil on a semi-regular basis.

@bubbabb8464 Год назад

another awesome video. can't wait to see the next one. top job 👍👍

@andrewthompsonuk1 Год назад

One comment I have to make is whatever method of rustprofing (other than a full zinc dip of a bare shell) one still needs to come back every year and inspect and touch up a few areas before the rust takes hold again. In the case of a Punto that probably should have been done every year from new...

@arthurdardalis Год назад

You should see the underside of cars here in Greece, spotless

@jamestaleporos9794 Год назад

Same can't be said for the bodywork though 🤣

@69Phuket Год назад

Grease is the Word! :)

@mikeburnitt403 Год назад

What I have done to stop my ramps moving is to tie some rope around the bottom rung, put the ramp against the (rear) wheel with the rope on the outside and then stretch the rope to the inside of the (front) wheel, then as soon as you move the (front) wheel will be on top of the rope, preventing the ramp from moving as the (rear) wheels start to climb it.

@shannonireland9057 Год назад

Great job! Looks so much better!

@allanmollison6971 Год назад

Thanks for sharing Matt. Much appreciated 😊👍

@TheMaccatakker69 Год назад

Transformational Floor Matt, well done!

@Backwardlooking Год назад

Done that with the same products with my 93 190E and 94 Volvo 855. 👍🏻🏴󠁧󠁢󠁥󠁮󠁧󠁿

@christineayres7199 Год назад

I saw a 1998 Punto for sale £999 sadly by time i phoned the seller had sold it , mint it was too only 70k on the clock

@SWBF2-2005IsBestStfu Год назад

Gotta admit I was thinking about using lanoguard on the underside of my Citroen c2, is this stuff better/easier to apply/longer lasting then something like that??

@furiousdriving Год назад

I think this is longer lasting, and it goes on easy (much cleaner to use than Waxoyl), Ive not used lanogaurd but the adverts make it look easy

@chrismaguire719 Год назад

I use lanogaurd once a year on my mondeo . Just power wash the underneath of the car off and then coat it in it.

@angrymuffinsb Год назад

Would it be viable to get a hose fan spray that oscillates and just drive over it? Feel like it’s a lot less manual labour 😂

@khalidacosta7133 2 месяца назад

How many tins of Dynax UB did you end up using? I want to do this job but unsure how much I need

@alastair1955 10 часов назад

Why do certain cars rust more? The grade of steel used?

@mb280sl7 Год назад

Matt, great cars in the collection. Love the Alfa, the Rover 75, the Punto and Tomcat. Do they still Zebart cars in England?

@furiousdriving Год назад

not seen it for years, but when you see an unrestored 70s car it normally had it

@peteohead Месяц назад

How is it holding up? Has rust re-appeared through the coating?

@patrickhostler5939 Год назад

Splendid job sir😊

@terryatkinson3182 Год назад

Be interesting to see how this lasts. Doesn't nitrosilvia recommend vactan before spraying this stuff on underbody of cars.

@furiousdriving Год назад

Not sure, Ive missed his rust treatment but this is meant to kill rust as well

@LuisCardoso-bo8yx Год назад

Damn, the British roads aren’t kind to cars. I myself still keep my late mom’s 1994 Punto 55S and its underside looks brand new in comparison with that, with not a single spot of rust to be found.

@martinclapton2724 Год назад

Good stuff, keep her going.

@claesolsson8297 Год назад

nice video . this punto looks good if you compare vith mine but it made 24000 swedish miles in vest coast of Sweden. punto 2 not much better. THe Grande punto much better !

@Phil-1969 Год назад

Matt the rust and the metal you exposed from the grinder you should have used bilt hamber hydrate 80 to start with then after painting that on and it going off , then use your spray wax , I’ve just done my TT with it ,I don’t think the old fiat has much longer on this plant , it’s not looking good underneath, you haven’t done anything to stop the rust just sprayed on top of it and made it worse by sanding the under seal off the bottom to expose the metal

@furiousdriving Год назад

@Phil-1969 Год назад

@@furiousdrivingok sorry I didn’t realise that , but it’s some good stuff

@furiousdriving Год назад

@@Phil-1969 yeah, it’s not the old days of black goo and hope for the best!

@johnmoruzzi7236 Год назад

Agreed... removed a load of primer and underseal, didn't convert the rust, didn't even spray Halfords Zinc primer. Instructions said specifically apply to painted surfaces but it just went on to bare metal as the only protection. Ok for awkward unimportant suspension bits but sloppy for the flooprpan and sills.

@royfontaine5526 5 месяцев назад

@@johnmoruzzi7236everything he does seems sloppy tbh.

@skyll4141 Год назад

furious brushing. I bet your neighbours love all the paint smells and noise lol.

@furiousdriving Год назад

ou tin the day

@skyll4141 Год назад

@@furiousdriving result

@gazzamundo Месяц назад

Did you not c9nsider Hydrate 80 before applying the wax?

@daenz8334 Год назад

Buy A small sandblaster better than grinder, although doesn’t replace it

@mikepottes Год назад

I agree with sum ppl here... good effort...🤟 Time well wasted. Welding up the beast "FORD" with that time...much respect 4 try'in.🍺🍺

@iainstewart6096 Год назад

Fair play good hard work 😊

@nigelbarratt6825 Год назад

When I was in the motor trade we used to compare Italian cars to dehydrated food, in those days Vesta curries, Surprise peas etc, these days think pot noodles. We used to say Italian cars are made from dehydrated body rot - just add water for instant rust! Trying to keep rust at bay was virtually impossible, even when they were only a couple of years old. We decided the best place to take them for treatment was the scrap yard, then go and buy something non-Italian and half decent.

@Parknest Год назад

Matt, have you ever considered Lanoguard? Is it something I'd like to try on my Volvo XC90.

@furiousdriving Год назад

Ive seen the ads but I know this is quality stuff

@Parknest Год назад

Bilt Hamber is indeed good stuff. One of my Triumph friends (now deceased) swore by it.

@Snarl616 Год назад

How often do you need to spray rust protector?

@furiousdriving Год назад

depends how much the car is used and the conditions could be every 1 or 2 years, could be 5

@richardhaywoodh Год назад

I have used Bilt Hamber Dynax UC on brand new cars all underneath stops suspension components even thinking about corroding. Hammerite's Shultz with built in Waxoyl is great for older cars and leaves a black self healing protective layer on the underside

@nickjones2536 Год назад

Is wax enough though where there is bare metal. Maybe Bilt Hamber is different?

@furiousdriving Год назад

its a rust inhibitor as well and it makes a thick covering so should be good

@Lot76CARS Год назад

Matt, I’m sat here crossing my fingers this video does not involve welding!

@furiousdriving Год назад

For once, we're in luck!

@SJR313 Год назад

You should try the dry ice treatment for the Punto….would be an amazing candidate….

@martin1649 Год назад

Price of treatment exceeding the value of the car..

@usuallyfixingtinkering Год назад

in the real world that is not cost effective but fantastic if you have really deep pockets!

@eltontothemax Год назад

Who’s Rob lol

@SJR313 Год назад

I thought you might be be able to partner with one of these companies to have some cross pollination of viewers….

@furiousdriving Год назад

Id like to try it but I dont think I could afford it/justify it on a £1500 car!

@magnusfrom8086 Год назад

You are so Good, love these episodes😁

@madmoo8836 Год назад

Quick question about your punto, does it have the rare 6 speed gearbox?

@johnmoruzzi7236 Год назад

No that was the 1.1 EL... very rare.

@christopherreed442 Год назад

You’ve not looked back since I recommended Bilt Hamber

@mikenewman137 Год назад

How many cans did you use underneath the Punto ?

@furiousdriving Год назад

2 on a car this size, same as on the Mini, but have spotted a couple of places I need to go back over again

@69Phuket Год назад

Bit the bullet and did the under of my Mazzy 2 few months back. Mask and Goggles job.. Not fun..! Ramps made it easier.. Eager to get back under and see what's happened since!

@furiousdriving Год назад

hopefully nothing more than dirt!

@SimpsonsClassics Год назад

Wow that’s a messy job but well worth doing for sure.

@furiousdriving Год назад

essential!

@SimpsonsClassics Год назад

@@furiousdriving just done the same to the vw aha

@nakoma5 Год назад

It seems your channel, apart from reviews, is mostly about preventing, fixing and repairing rust.

@jasoncornell1579 Год назад

Did u use the tea shelf?

@furiousdriving Год назад

no, it was full of bits!

@iainstewart6096 Год назад

I love a black oblong driveway

@MagnyCoors 11 месяцев назад

Supposed to be galvanised those cars? Still it can't hurt.

@philiprush3745 11 месяцев назад

Anymore updates on the crown vic

@CathodeRayNipplez Год назад

Why is it that cars rust so badly in the UK while those same cars outside the UK do not?

@furiousdriving Год назад

road salt and damp climate

@jimmyquinn9639 Год назад

Another excellent video 🚗🚙🚘⭐️⭐️⭐️⭐️👍👍👍👍👏👏👏👏👏

@Andy-eo3mq Год назад

These videos make me really miss owning a Fiat. 😞

@aapaap8595 Год назад

If you want to do this properly, you have to disassemble everything and dry ice blast everything. Now you're only doing the visible parts, but non visible parts are skipped while those get more vulnerable now.

@furiousdriving Год назад

30 year rusted bolts means a couple of days fighting rusted solid fixings, this will creep into most places