sawing pine 

I dropped in on your channel a little over a year ago. Very interesting and soothing so I decided to go back and view your RU-vid roots. Watched the video of you demonstrating your old mill for sale which brought me to this VIDEO #1. You and Eddie have really put in the work. Congratulations! 😎

Mark please remember that beauty is in the eye of the beholder just look at what you got out of it.

Boy that was a long time ago. You guys have come along way to now.

my uncle Pete started as a Sawyer with Canadian White Pine in New Westminster BC,--- the Rayonier CO. owned the mill...I was involved with the design and manufacture of a log scanning machine for Weyerhauser in Oregon....later was made legal for trade

Watched again today, the place has changed a little. 👍🎅🏻

i just love the efficiency of all these big ole machines working , for a simple purpose......... love it !!

well I really enjoyed this video.it's nice to listen to two men talk to other in a calm normal tone of voice.i remember when I was a kid hearing a sawmill running in my home town of cash,arkansas.they cut down just about all the trees there but theres lots of wide open farmland for rice and beans and tornados.lol.thats a very smooth running saw.thx.

Love the sound of that mill running. We have them all over Tn. . I worked at a mill that had a band saw for about 7 years. I enjoyed it , I operated a cat loader feeding the mill , loading and unloading trucks , and other things.

I just had to watch this again just to see how much have changed in 2 years + how much better the filming has become + how much hes explaining of the prosess have become.

I don't know what it is, but for a non-logger like myself, I could watch this for hours! Thanks for lowering my blood pressure by half.

I have seen the sawyer take the ones with nots in it and come out with some nice looking boards this is my favorite video. i used to work in saw mills from the age if 15 on up to ten years until retirement

Pine and Spruce , the best sawing wood God ever created

I thought I'd watched this all the way through but maybe not. The old sawyer would take a flat file to the dogs once in a while so's they'd bite but that was on a manual setup. That still runs!

no eddie, no zz, no building, no flags, no license plates and mark has come a long way with maneuvering the machinery. i guess we all start somewhere. keep up the good work.

Wow! This is before the building and before Eddie. Interesting.

Very modern pine saw machine I really like your Channel video

nice job again mark have a nice day...

it's nice to come back to see the beginning of all this

To się nazywa dobra inwestycja. . szacunek.

Everyone starts somewhere and then you go and show them your first few days... my hats off to you sir. Those guys that run them for years started on a day like you and then they get better. I couldn't take the pressure of people watching me. Light a fire under the off berers ass and make them help instead of just looking at a obvious ah dang it. I hate wasting wood to but its better to peel it down to where you can handle it. I started in Selma arkansas and it worked me like a dog till I got the hang of it then I showed no mercy for about a month and after that they would jump to help cause I could barry them in lumber. I had a rock come out the side and break my glass and that scared me stiff. We all have them days

Took quite a time to get squared. Interesting. You are the master-man.

I learned to saw pine lumber on a FRICK 00 manual sawmill that was probably 50 years older than me. I know what you are going through. BIG difference between pulling the STICK and working the leavers.

It's different watching your older videos when there was no shed. Nice even still.

You fixed it awesome

really very extraordinary

Wow Mark, You’ve come a long way. I enjoyed this one.

Wow before the building cool

Mark do you and Eddie own the mill. I now know why you call Eddie. The Eddie. He make the two young guy look slow compared to him.. enjoy watching you guys work.. I have 1220 Timberking mill 21 feet long. 29 inch diameter. I love to make lumber as well. God bless you guys!😂

Amazing ,I’ve just seen a helper with a shaven chin 😂

I love watching your saw mill. I DON'T CARE WHAT THEY SAY.

I taught pine was telephone pole or those super straight pine trees, Like they use that engine on the mechine that run & trim the branches and the bark in 2 pass. These are bigger at the bottom like regular trees.

Love this Video Mark! THANKS!

Good job keep it up love watching you saw wish i could be on the end of that mill

My how things have changed. Other than addition of a bldg, the biggest chg is slowing down the hydraulics. This was tooooo fast. Well done boys.

Very good video

💪💪💪

I have a band mill and saw mostly for myself. The question I have, do you center the pith on the first two sides of the log. So you get ring centered wood the bows and cups less. I do it by measuring from the bed to the pith so I saw parralle to the center on the first two sides.

cakep bos ,ok mantab.😀😀😀😀

You've come a long way 😉

Love to see this...

Tip from an old timer: your log turner will work far better at the log’s center of gravity.

Eu..adoro.asisti.essas.maguena.sera.madeira

brings back memories went to a sawmill for high school senior class 1976 Sonoma county loved it they were cutting redwood

Yep the mill is out of the wild

When you move your set works BACK, (left thumb, second from the right) ALWAYS, ALWAYS move forward because back-lash in the gears.

супер , смотришь и и получаешь удовольствие

Nice set up. I have one very much like it.

Good......

Liked

💕💜

should cultall those crooked ones into 2 pieces. get more good boards that way!

Молодцы! Искал принцип работы. Нашел.

Do you run higher blade speed for pine?

Praj bay

I hate seeing live, healthy trees cut down, but it sure is nice to have the lumber to work with.

😊👍👍💥🌎👍🍻

My goodness, how things have changed in 19 months.

Can't beat a CIRCULAR SAW for Cutting! Band Saws are for the PITTS!

Great video but such a sudden ending

Amlucratindome noii

Thanking you for this comment

This is what i want to do my grand father and father sawmill was a left handed coutts sawmill they stopped sawing in 1980 was a sad day for me

Was watching 8 Indonesian fellas milling huge logs barefoot on a saw mill that was pretty much manual....next video, no Eddie, no building, no Mark telling me hello.

Is that a 42-inch blade?

Wow I missed some older ones! Look at that, no building and no Eddie! Great stuff Mark and look at that 4,357,269 views!!! 😳😳👍😎

Mantab salam satu hoby🙏🙏

🇧🇷🇧🇷👏👏🇧🇷🇧🇷

How did you learn to run the sawmill?

where in the world do you get all the good helpers ?

Muito bom !

I wonder what happens sooner, the end of this log or spring. :-))

You really have a nice rig. I bet by next winter you’ll have a big pole barn built over it and some metal siding here and there to keep some of the wind and water off. 👍🏼

Cost plea

Does Eastern Hemlock warp like Western Hemlock here on the west coast ? But I’m gonna guess it myself . I think all Hemlock lumber warps . It’s more of a lumber for interior work !

Does this rig have water or solvent option to keep blade cool and resin free?

Is the market strong for the ironing boards you cut.

Is a circular saw better than a continuous loop blade? Or is it just a matter of preference?

👍

Safety tips using angle grinder

You came a long way my friend

Nice mill you got there

I've been watching some of your older videos, what a change in the las few years........I was curious did you and Eddie go in together with this sawmill or did you do this on your own?

GOOD EYE,WELL DONE!

Ce Pin ressemble beaucoup au Pin Sylvestre que nous avons en Europe

When the log reaches the carriage, how do you determine the starting point with respect to the initial roll? Are you looking at the wood grain?

sawing pine

Edson De Araujo Sales

What sawmill is this?

Not the same without The Eddie Horvath!

That rotator arm really chews up the surface. Too bad the log can't be rotated without damage.

Crikey mate. He's a biggin

Hello.I am Southeast Asian people. Your content is very new in my country. I would recommend it to the people in my country. Can i use your content?

Well, you're learning.

That's hemlock. Duh. Nice ole mill

that looks like Mike mcoy rig

Fantástico

Hello Can you give me the price of the saw?

Sistema muy Viejo de ase mas de 60 Anos y super lento

Silla escalera por fabor

Excelente maquinaria parasacar tablas del tronco