Scrapping Ceiling Fan Motors: Sell as is OR get the Copper?

Подписаться 12 тыс.

Просмотров 12 тыс.

50% 1

Shark Scrapper is scrapping a ceiling fan motor to determine if it makes more sense to sell as an electric motor OR take the time to get the #2 copper and sell as shred plus #2 copper.
Shark Scrapper Shark Adoption Project (SSSAP)
We are going to adopt a shark for tagging and research through the University of Miami's Shark Research and Conservation program. Our goal is to raise $3,000 by the end of the year.
Donate through paypal: paypal.me/sharkscrapper
Donate by mail: Shark Scrapper LLC, P.O. Box 600250, Saint Johns, FL. 32260
Donate through merch: A portion of all purchases will go to support shark research:
Shark Scrapper Merch: www.spreadshirt.com/shop/shar...
Shark Scrapper Private Label sauce: sharkscrapper.com/shop/
Please indicate if you want to remain anonymous
Link to shark tagging video: • This is Shark Tagging
Link provided by Neil Hammerschlag Ph.D., University of Miami. Director Shark Research.
Camera(s): GoPro HERO 9 Black
Software: Camtasia and Snagit by TechSmith, Adobe Photoshop
Tribal Shark Scrapper logo with mask by our friend from New Zealand: Erewhon

Хобби

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 197

@GilSkillz 2 года назад

I break down just about everything. But it's a piggy bank for me as I'm hoarding the more precious metals. GREAT VIDEO MY FRIEND!! This is a passionate subject for me. Peoples time/space play a HUGE factor in how an educated scrapper breaks down their metals. What works for one, may not work for another. :)

@sharkscrapper 2 года назад

Spot on my friend. Lots of "right" answers to this question and the only wrong answer is to not ask the question.

@1031Vintage 2 года назад

I’m not a scraper but was fascinated by this. That was a great idea to break it down to see if it is worth your time. I would just sell it as a copper motor and move on to the next. Thank you again for your service and for saving the earth every day!

@sharkscrapper 2 года назад

Glad you enjoyed it Kris and you're welcome. I love doing this, especially knowing that every pound of anything I divert from the trash is going to be reused somewhere.

@Dav3Campb3ll 2 года назад

Great tips you've taken it down in minutes. I want to find a ceiling fan motor now and try.

@sharkscrapper 2 года назад

Awesome - I like folks like you. People who say, "I can't wait to try that."

@EricScrapping4Dinidog Месяц назад

If you look around, especially this time of year, they’re literally everywhere. You’ll find them.

@EricScrapping4Dinidog Месяц назад

Very good video! I just got a bunch of motors. I’m going to take them apart after watching this! Thank You very much! 😊

@chasebarnard1223 Месяц назад

Your setup and layout of your scrapping zone is amazing!

@sharkscrapper Месяц назад

Thank you - starting over on a new location. We’ll see if we can have an even better arrangement.

@chasebarnard1223 Месяц назад

@sharkscrapper well I'll be following your videos. If ya did it once, you'll do it again.

@dylandesenfants5554 2 года назад

I’m still going to break mine down, I only get 10 cents a pound for motors and that’s the best price within 3 hours of me. Versus breaking them up and getting over 3.00 per pound for copper and 7 cents a pound for shred. Even if i get a pound of copper out of each i’m getting give or take 3.50 for the the whole unit broken down versus 60 cents. That’s my take. Appreciate the video shark. Very informative and helpful.

@sharkscrapper 2 года назад

The decision is very dependent on local prices and at $0.10/lbs for motors your decision makes sense. I find it very interesting that scrap prices can vary so much. Sometimes even within the same city. It pays to shop around and do the math. Keep scrapp'n!

@clarkepayne 2 года назад

I have a 50 gallon drum full of CRT yokes I've collected over the past 2 years. I plan to harvest the copper this fall and will probably keep it until price goes up. Will let you know how many pounds of copper and shred I get when processed. Thanks for the great vids. My father was in the navy in wwii.

@sharkscrapper 2 года назад

Clarke - CRT yokes are a great source. I have a bin full of them waiting for me to break them down. Waiting is a good call, prices aren't very good right now. But like all commodities, it will recover.

@sukru6797 Год назад

I have a pile of fans ready to break down. However, i scrap because I enjoy it AND the money gets put to work in the garden and beekeeping, thereby growing returns, literally. For that little per hour extra, right now it wouldn't be worth it for me to break the down. Good to know. You saved me hours of work and feelings of guilt for being 'lazy'. I greatly appreciate it.

@sharkscrapper Год назад

Happy to help. Love that you're using the proceeds for gardening and beekeeping.

@JohnDisque Год назад

Well.... there's another category of part-time scrappers who simply love copper and other metals and see stock-piling them as "money in the bank" like a bank account they can see and liquidate anytime they want. They also have the bonus of knowing someday it might sky-rocket in price. So it's kind of like a lower-version of people hoarding gold as a form of security and eliminating stress. While copper is not a precious metal I personally think it's stunningly more beautiful than gold, silver, platinum and bronze and of course it's way, way more accessible at a price of zero. Just another take - Great video.

@sharkscrapper Год назад

No arguments. I also find copper very attractive. There are also artists and casters who go for the copper to have material to make things. Many reasons to scrap.

@EricScrapping4Dinidog Месяц назад

Very good video! I just got a bunch of motors. I’m going to take them apart after watching this! Thank You very much!

@sharkscrapper Месяц назад

Glad I could help

@gabrielmaligeorges4362 2 года назад

Thanks for the video Shark. I use exactly the same approach. I prefer to scrap them out completely. They are easy to do AND I have the time available to do it.

@sharkscrapper 2 года назад

Right on

@barrywest3758 2 года назад

It just depends on the person, if they have the space and the patience, me I use to stock pile them and slow days tore them down and then stockpiled the copper. Good little video, enjoyed 👍👍

@sharkscrapper 2 года назад

Absolutely Barry - each scrappers situation is different and many right answers to this.

@Dav3Campb3ll 2 года назад

I definitely want a pair of those snips!

@sharkscrapper 2 года назад

I believe I got those at The Home Depot. The brand name is Irwin. But plenty of other brands out there make compound edge cutters.

@Dav3Campb3ll 2 года назад

@@sharkscrapper the rock hammer too. I'll have to find one too. Your making it look easy

@michaelschuenemann3505 2 года назад

Nice Way of getting the Copper out and Your Great Explanation as always ! Stripping most Scraps for its Non Ferrous Metals will in the long Run make You more Money as we have seen just Recently with Copper and Alu Prices ! If You have the Time Micro Scrapping is the Best - its proven itself soooooooo many Times !!!! Great Video - we love it and Blessings from us in Australia!!!!

@sharkscrapper 2 года назад

Thanks Michael - especially if you have the room to stack it up and don't need the cash now.

@RoeMantic 2 года назад

I love the way you tore the fan motor apart.

@sharkscrapper 2 года назад

Thanks Roe - it's the result of watching many other scrappers and trying many different things.

@SollersScrappingandDiving 2 года назад

Yes mine is a slate hammer with the fine point, very handy for smashing plastic also! 🙂👍

@sharkscrapper 2 года назад

A wonderful tool - I'm liking mine more every time I use it.

@boardsort 2 года назад

Awesome analysis Shark! There are only so many hours in a day and time is important.

@sharkscrapper 2 года назад

Couldn't agree more!

@caseybinion806 2 года назад

I never thought about cleaning a Ceiling fan motor thank you I’m going to try this out the next Sillen fan I find

@sharkscrapper 2 года назад

Happy to help !

@caseybinion806 2 года назад

@@sharkscrapper 😎👍

@judybeckner5623 2 года назад

Very helpful Shark

@andrewmerritt3322 2 года назад

Great vid Shark. Thanks

@sharkscrapper 2 года назад

Glad you enjoyed it

@russelldavis2476 Год назад

Retired so time is not money, it's actually fun scrapping copper just to see how things are made. That being said money is always good.

@sharkscrapper Год назад

I get it. When this was my hobby, I dug into everything. Now we keep them doggies moving 🤣

@andrewpowell6457 2 года назад

Nice vid my friend a thorough breakdown there of pros & cons

@sharkscrapper 2 года назад

Glad you enjoyed it

@scrapitjc 2 года назад

Very informative thank you

@sharkscrapper 2 года назад

You're welcome - my pleasure

@judybeckner9047 2 года назад

Thanks Shark, I like the way you broke down the prices. I think copper prices will go up

@sharkscrapper 2 года назад

You and me both!

@jeffswartek7356 2 года назад

Great vid.

@YouCoontsSeeMe 2 года назад

Rocking it with that rock hammer. Very good video Shark. 🦈

@sharkscrapper 2 года назад

Rock on!

@TECHNICUSChannel 2 года назад

Oh yaeah interesting think! Have a nice day my brother in collecting and scrapping!

@sharkscrapper 2 года назад

Thanks 👍 I love these mental exercises or brain games.

@StadiumChasers 9 месяцев назад

It’s good for smelting so I like that idea (:

@marthashipman9010 2 года назад

Liked this video. If one needs the money badly scrapping it out is the way to go i guess otherwise maybe not. You definitely think like a business man which is good as you are one. I enjoy watching and listening to your logical reasoning.

@sharkscrapper 2 года назад

Thanks Martha - lots of factors involved in this and many right answers depending on one's circumstances.

@tinknal6449 2 года назад

It's not always about "needing the money". It's also about time. Today I made my scheduled pickups and had time to spare. When it comes down to doing nothing or mining copper during those free couple of hours I'm going to make a few bucks. I have enough money to sit on my ass this winter while scrapping is slow but I'm not going to do it. I have tons of break down items to keep me busy this winter and my copper stash just gets bigger and bigger. It's like a savings account.

@sharkscrapper 2 года назад

@@tinknal6449 I'd say you made Martha's point quite well and I hope folks read this thread. You're a great example of someone that has thought this through long term. You make enough during "the season" to meet your needs for the year. You continue to earn in the "off season" by mining some of what you accumulated before. This is a good model to follow if one's scrapping is seasonally/weather impacted.

@tinknal6449 2 года назад

@@sharkscrapper Thanks, my stash is also a nice little insurance policy I could draw on in times of need.

@josephcormier5974 2 года назад

Good one shark well presented two thumbs

@sharkscrapper 2 года назад

Thanks 👍👍🏼 back at you Joseph

@nachostuff 2 года назад

I haven't even been breaking my fans down at all - I think the motor route sounds best. I also understand that you should check the blade attachments to see if they are cast aluminum. Learn something new everyday. What other things have electric motors that makes sense to harvest before you dump it with the shred?

@sharkscrapper 2 года назад

Hey Nacho - yes, I recommend you get the cast Al or pot metal arms that old the blades. I've shown that in other videos and can give you a link if desired. There are several common scrap items that have motors: washers, dryers, Razor scooters (battery operated ones), microwaves, and - of course - other types of fans. Dishwashers will have small motors BUT be careful as many yard will deduct weight because of all the plastic in the body of most dishwashers. Some have stainless steel bodies and make great scrap value.

@CruiserMac 2 года назад

Always good to know if something is really worth taking apart or not.

@sharkscrapper 2 года назад

I was surprised the difference was greater. Now some folks are getting very different pricing that changes the math. And of course, if you goal is to stack copper, well that's an entirely different calculus.

@CruiserMac 2 года назад

@@sharkscrapper Yes, I am not stacking Ima sellin' 😁😁

@anfieldroadlayoutintheloft5204 2 года назад

good vid keep up the good vids

@robk1310 Год назад

As this was a year ago, something to add here in 2023, with the price of zinc rising, the metal parts that hold the blades, usually zinc, are worth saving in a bucket until you get it full.

@sharkscrapper Год назад

It's definitely worth keeping if you're going to break down fans. My latest prices are $.045/lbs for cast Al (my yard doesn't separate Al and zinc) vs $0.35/lbs for motors. You also bring up an important issue - the need to keep an eye on prices.

@jackmclane1826 Год назад

@@sharkscrapper Isn't zinc significantly more valuable than Al?

@RafalScrapper 2 года назад

interesting did that counting my self a hundred times and at mee it depend of my mode if i feel like i will take it apart if not or just have too many sell them as motors👍

@sharkscrapper 2 года назад

I understand that logic completely brother.

@cuscrapping 2 года назад

I think copper is going to go up, but not significantly enough to justify the time spent on these. That being said, I still tear them down when time allows because both of my local yards have quit taking them as motors and only take them as shred. Not sure if that is because my local yards suck, or if that is an industry trend. my yards won't take aluminum motors/transformers except as shred. :-( Another great tutorial and looking forward to Shark Bytes on Wed.

@sharkscrapper 2 года назад

I'd say that is NOT an industry trend. I have a few yards I work with and they all take copper bearing motors as motors and the aluminum motors as "breakage". I'm guessing your yard doesn't have a buyer for motors OR where they're located makes it not cost effective for them.

@cognac8297 11 месяцев назад

Where I'm at it's 16¢ a pound. So it's definitely worth it for me to take them apart.

@sharkscrapper 10 месяцев назад

That's why I do these vids, to help people make informed decisions.

@pyredynasty 2 года назад

I just like taking things apart. The metal is just gravy.

@sharkscrapper 2 года назад

I love it! 🤣

@muriaticacid7004 2 года назад

Thumbs UP

@peggybarnhill4285 2 года назад

is that an Estwing hammer? They have been in my vehicle since i started looking at rocks.

@sharkscrapper 2 года назад

Yes, it sure is Peggy - good eyes.

@lenscap8925 2 года назад

Will your yard give you a better price for the irony-aluminum stator, since it is separate vs shred steel?

@sharkscrapper 2 года назад

That's a very good point that I should have addressed Lens Cap. My yard doesn't, saying it's mostly steel. But I'm sure there must be some that do which changes the math. Thank you

@evriellesmith6659 Год назад

I take the copper out the same way but have a wash tub i put under the vice and let it drop

@sharkscrapper Год назад

Very clever

@Alrik. 2 года назад

Thank you for the informative video! I might have missed it in the video but is this actually what you do with all your fans? Or just this time for the video?

@sharkscrapper 2 года назад

A good question. I had been breaking down the fans for the copper but decided I'd better do the analysis just to be sure. Now that I've done the analysis I am rethinking my strategy. While I want to stock pile copper for the future, I must be mindful of current cash flow and my time. With most of my time devoted to scrapping computers, I will start selling more motors as motors.

@Alrik. 2 года назад

@@sharkscrapper I thought it would be something like that! I was a bit dissapointed with how little value increase there was, but I guess processing machines like the hammer mills of MBMM are very efficient, so the scrapyard can offer you pretty close to the actual value that's in the motor. I understand you need the time for other scrapping, I hope you find a different way to keep stockpiling copper.

@MrsMika 2 года назад

Could you do a video what is the difference in ceiling fans, like a cheep one from Walmart and an expensive heavy ceiling fan? Are their guts the same?

@sharkscrapper 2 года назад

Interesting - since I find the ceiling fans on the street I have no idea where they were sold or how much they cost. I can make educated guesses based on how fancy and sometimes the brand name. That said, I can't remember ever finding a ceiling fan with an aluminum motor, always copper wire. I'll keep an eye out for fans with obvious quality differences and see if it's worth a video.

@tinknal6449 2 года назад

I'm stockpiling.I have a 55 gallon barrel nearly full of windings. Not sure what it weighs but I can't move it. I probably have another 3000 pounds of #2, a few hundred #1, a thousand pounds of wire, 1000 pounds of ACR, 500 pounds of brass, and a ton of compressors. Not even thinking of selling until #2 hits at least $5. I read industry analysis and I'm not going to sell until I start to see projections begin to meet future demand. I made my pickups today, sold 2200 pounds of shred at $155 a ton besides a couple hundred pounds of rotors and a few saleables and had time to burn so I broke down motors for an hour. It's that odd hour or 2 a day where this kind of work is profitable. Nothing else going on, I can enjoy a beer or 4 while working my copper mine. Scrapping slows way down here in the winter so I fill my time by adding value. Still have about 20 pool heaters to break down each good for 20 pounds of #2.

@sharkscrapper 2 года назад

Awesome plan, well considered. And "enjoy a beer or 4" 🤣

@jr-a-cat 2 года назад

I use a vice on a steel plate inside old plastic tote and hit it with air hammer cut off one side flip over change to fork bit. I brake them down for the copper and save it for trips planning on going to Japan , Korea , Australia next year

@sharkscrapper 2 года назад

That's awesome. I've been to Japan many times in the Navy and private biz. Korea and Australia only once each when I was in the Navy. I'd love to go back to Australia and see New Zealand.

@jr-a-cat 2 года назад

@@sharkscrapper Been to Japan 6 times 4 times with the Army no fun there .I want to ride the bullet train from one end to the other and do the sunrise clime on Fuji.I lived in Korea for 14 months been all over form DMZ to Chjou got chop sticks will travel

@sharkscrapper 2 года назад

@@jr-a-cat Sounds like loads of fun

@aureliaa723 Год назад

In my area they don't buy ceiling fan motors So I either have to strip them or toss them in shred

@sharkscrapper Год назад

That’s unfortunate

@mrsnorthwestfloridascrappe7663 2 года назад

I have broken down some to that point and there is some that will not give me a chance to do that

@sharkscrapper 2 года назад

I know what you mean, some can be very uncooperative.

@user-yj5nb9oe5i 10 месяцев назад

Some of my ceiling fan motors appear to have copper plated aluminum windings.

@sharkscrapper 10 месяцев назад

Interesting, but doesn't surprise me. I'm seeing more and more Al wire in use.

@kdscrapping4452 2 года назад

Prices vary. Copper here for #2 is 4.30 a pound. Motors 25 cents a pound. Irony aluminum is 20 cents a pound which U threw in shred bucket. Yes it does vary where U r !! As U know I do take apart!! Copper is copper L O L !!! Nicely done !!

@sharkscrapper 2 года назад

Yeah, I should have done a better job discussing the irony/ali or "breakage" part. My yard won't take it as breakage, too much ferrous. But many yards do. I'm so used to putting it in shred I failed to mention that.

@EstonianScrapper 2 года назад

Of course i would separate them if i have chance to come across one lol :)

@sharkscrapper 2 года назад

🤣 I have a hard NOT coming across them.

@cardmarketmedia 2 года назад

I own an e-waste company and boy I have some tips. But when it comes to the copper, we hold it and eventually make bars/ingots and it substantially increases the value of your copper. Just an idea for you...

@sharkscrapper 2 года назад

Thanks - I'm looking into this. So you're essentially a mint or foundry. Most yards will not buy, or pay lower prices, for bars because they don't know the composition. But clearly mints and foundries are treated differently.

@sharkscrapper 2 года назад

I looked on your ABOUT page and don't see an email address. I'd like to explore some of those other tips you suggested you have for me. I'm at sharkscrapper@gmail.com

@cardmarketmedia 2 года назад

@@sharkscrapper No we are not a foundry. We just do it and sell to locals and/or online IF we sell it. We have been holding on to them lately. The yards are going to pay you the same price regardless of what shape it's in. You are correct on they will pay lower prices because they feel it may be contaminated. Building relationships is important when you go to sell. You must be genuine when you are melting it down and don't throw some random piece of metal in there. Experts will find out. I feel you are a genuine person for sure especially given your military service. I can across your channel by listening to Nickk Nimmin over the weekend. When he said "scrapper" I went and looked you up. This channel is just geared towards sports cards which is a passion of mine. I don't put my business on social media so that I evade the people that try to ruin you because you said something they didn't like. I have put up how-to videos about it though. We only started doing this about 3 years ago. I got the idea from "bigstackD Casting" on youtube.

@sharkscrapper 2 года назад

@@cardmarketmedia it’s great having you here and I look forward to all you’ll share. Can’t tell you how much I appreciate your comment. As you noted, I keep my channel and related biz on the straight and narrow. My dad was Navy and I served for 25 years. To do anything else is just wrong.

@teamSHTF 2 года назад

I'm hoarding right now. Copper should rebound again.

@sharkscrapper 2 года назад

Solid plan

@benjiehoffard9323 2 года назад

I try to brake down everything I enjoy that part i even strip extension cords

@sharkscrapper 2 года назад

It is fun taking things apart. It's one of the few things I'm good at 🤣

@benjiehoffard9323 2 года назад

@@sharkscrapper yes your are I really enjoy your videos like that it Really helps me in my scrapping to.

@marysalinas3961 Год назад

Any valuable metals are worth my time. Just keep pile it up. The worth of copper is going up.

@sharkscrapper Год назад

Cu is absolutely going up. Only you can decide what your time is worth. I'm just trying to help folks make informed decisions.

@scrappingonthefly77 Год назад

Luckily my yard accepts it all as a motor

@sharkscrapper Год назад

That is fortunate.

@LuisRodriguez-xf9lv 2 года назад

Well done, keep that good work. this is for people who enjoy and take it as a hoobie while earn some money. Others, like to scrash in your face (I earn 200 an hour that is a weist of time), i yust say well I am happy for you too

@sharkscrapper 2 года назад

I hear you Luis. Scrapping is definitely NOT for everybody. AND the difference between scrapping/recycling as a hobby VS a profitable biz is huge.

@wayneday3916 2 года назад

I liked this video but it's going to cost me seeing it. I will need that hammer then those cutters and the gas to go get them and time as well but I can see the end result will make it easier on me 😆

@sharkscrapper 2 года назад

Sorry about that Wayne 🤣

@wayneday3916 2 года назад

@@sharkscrapper that's alright it's things that will make scrapping easier.

@JohnnySwedishScrapper 2 года назад

in my land the Sweden ;) its better to take ALL kind the more you can work the better pay, becaus the law, we have company that are goverment rule to pick up, an redom scrapper as me if i dont have an company, i do get more for my job than dont, and i have my seller word on it, steel/shreed dont give much if you dont have than an ton, so for me Micro scrapping are the best great video

@sharkscrapper 2 года назад

Yes, it is very important that each scrapper understand their laws and situation. Lots of right answers to this issue.

@JohnnySwedishScrapper 2 года назад

@@sharkscrapper ;)

@diannelogsdon6107 2 года назад

I’ve gotten $20-$25 for a set of blades n arms. Especially the stainless arms. eBay.

@sharkscrapper 2 года назад

Very cool

@billyb5057 2 года назад

dont seem much to gain money wise but it relieves you from constant computer scrapping then thats a human mind gain may be important *left a like for you 👍Au 👍always a full view*

@sharkscrapper 2 года назад

It is good to have a little change of pace some times.

@tomfedarick7042 2 года назад

New Jersey

@mrsnorthwestfloridascrappe7663 2 года назад

The more that I break down the more for my bank account

@sharkscrapper 2 года назад

There you go

@scrapwomblecreatives6944 2 года назад

My logic is totally different, I also look at can i make it into a generator lol but that's just the womble in me l...what i see is a flywheel two good ball racers and shaft so I a need a few magnets and play time lol many happy hours making my hair stand on end

@sharkscrapper 2 года назад

Now that is a very different perspective on the subject.

@scrapwomblecreatives6944 2 года назад

@@sharkscrapper But if i had to make the choice of moving fast at my age i would go for ease of selling on if I was looking at a pile of stuff each day. so sell as is and if i can sell it to someone messing around play generators had ask a fiver for it

@killjoy987987 2 года назад

Copper is doing the yo-yo effect

@sharkscrapper 2 года назад

Yup, it's a commodity and that's what they do.

@poosmate 2 года назад

Nice tear down and value comparison. Bet you could do it quicker when no-one is watching though. Take care, Poo

@sharkscrapper 2 года назад

I'm certainly faster with computers when nobody is around or I'm not recording.

@minecraftfan3455 2 года назад

I break down most of my motors bec. I only get 7cents per kg for them

@sharkscrapper 2 года назад

Very understandable.

@ScrappingIrish 2 года назад

I break down everything but then again I only do this as a hobby where you do it as a business

@sharkscrapper 2 года назад

Your breakdowns are very entertaining 😂

@s-s-p704 2 года назад

Bank all the brunt/no2 Copper

@sharkscrapper 2 года назад

Hey Snobby - great to hear from you. Trust all is well?

@s-s-p704 2 года назад

@@sharkscrapper hi sharky.

@ronaldaubuchon2535 2 года назад

Break down my yard 20 cents lb motor and they have to see the copper wire so I have to half break down any way.

@sharkscrapper 2 года назад

I don't blame you - in that situation, I'd do the same.

@artbetzhold9966 2 года назад

SPACE and storage is the issue for me

@sharkscrapper 2 года назад

Trust me, I've been there. Take a look at some of my older videos when I was working out of my garage. OMG, there were times when I had a veritable wall of scrap waiting to fall on me.

@YouCoontsSeeMe 2 года назад

I'm gonna have to order me a rock hammer. That or find one somewhere.

@sharkscrapper 2 года назад

It's very useful - look for Estwing rock pick or geologic hammers. No I'm not an affiliate, but now that I've said it - that might be an interesting idea?

@christopherjacobs2746 2 года назад

It all depends on what your time is worth I personally break down all tge motors I get

@sharkscrapper 2 года назад

Agreed - how we value our time is a big factor in this decision.

@nesco713 8 месяцев назад

I break mine down...I like scrapping as a hobbie.

@sharkscrapper 8 месяцев назад

It is a very enjoyable hobby for sure.

@streetcopper1151 2 года назад

Motor price here is 10 cent so I scrap all mine 👊🏻does one ceiling fan motor weight 6 pounds 😳

@streetcopper1151 2 года назад

Plus I believe copper is going to sky rocket in the next 5 years so if you don’t need to live I say stack it as high as the hills 👊🏻

@sharkscrapper 2 года назад

Motors for $0.10/lbs?! That's terrible. What is #2 copper there? Hopefully much better. I agree that there's a LOT of head space for copper in the future and if you don't need the cash - stack it.

@streetcopper1151 2 года назад

@@sharkscrapper I haven’t sold copper in two years .. but I think number 2 is 2.85

@sharkscrapper 2 года назад

@@streetcopper1151 That sounds about right. That's about what we're getting.

@chipurmunki 2 года назад

I break stuff down for stress relief. Better to make $2.28/hr than scream at kids for no reason or get an aneurysm.

@sharkscrapper 2 года назад

That's a very good reason to break stuff down. Keep at it!

@ronaldaubuchon2535 2 года назад

For a lousy 15 minutes u can get an extra 1 to 2 dollars per fan .

@sharkscrapper 2 года назад

Well, as I showed - in my case it's 10 mins to get $0.38, not a dollar or two. But it is so dependent on your local prices.

@neoone9820 7 месяцев назад

So what you're really trying to say is "there's more than one way to skin an electric motor"? 😊

@sharkscrapper 7 месяцев назад

There's almost always more than one way scrap things.

@robertknudsvig8832 2 года назад

Prep them for scrapping. Stockpile and get them ready to be scrapped or if the motor price goes up be ready to cash in. I think fan motors are too small to justify the effort put in. Especially wear and tear on the hands . Bigger motors that are copper should be stripped. It's all about efficiency and gaining profit. The amount of copper yielded in the fan motors isn't big enough. My 2 cents.

@sharkscrapper 2 года назад

That's absolutely a reasonable observation and one worth considering. But now you've got my head going on what is the optimal motor size to scrap 🤣

@davidk8699 2 года назад

I think it would be a lot easier if you held the hammer in your right hand ;)

@ruthbutler725 2 года назад

Think 🤔 he's left handed.

@sharkscrapper 2 года назад

As Ruth noted, I'm a southpaw. If used my right hand with the hammer there would be a lot of pain involved. 🤣

@sharkscrapper 2 года назад

Yup - I'm a southpaw

@steveherr450 Год назад

@@sharkscrapper I am also a southpaw scrapper.

@harleyfan3875 2 года назад

When you cut the end of the shaft you cheated yourself the ability to remove the cast aluminum bracket. I have done over fifty of these motors fyi

@sharkscrapper 2 года назад

I've lost track of how many of these I've done over the years. I've just gotten tired of wrestling with that bolt and just cut them off now. Not enough hours in the day for me to go after every little piece. But back when I was a hobbyist, boy howdy the lengths I'd go through cleaning scrap.

@harleyfan3875 2 года назад

@@sharkscrapper yes, I was the same when I first started, but now i've cut back on a lot of stuff. Garage has a lot of copper to be work.

@sharkscrapper 2 года назад

@@harleyfan3875 👍🏼