Тёмный

Scroll Saw techniques for beginners 

Dai 'lovespoons' Thomas
Подписаться 10 тыс.
Просмотров 123 тыс.
50% 1

Scroll Saw techniques for beginners.
Sharing some of the techniques that serve us well when working with the scroll saw. When learning to use a scroll saw, learning and developing different techniques can help you to succeed in the scroll saw projects that you undertake. This explanation and demonstration highlights some of the simple methods we use to get the best out of the time we spend working with our scroll saw.
These simple scroll saw techniques have been learnt and developed over many years of working with the scroll saw on a daily basis here at our family workshop.
For the free scroll saw patterns, please refer to the dedicated page on our workshop website by following the link below.
www.thelovespoonworkshop.com/...
Use the link below and enter the discount code: lovespoons at the checkout for a 10% discount on all Starbond products.
bit.ly/3leQt7U
For more information about our family workshop check out our website www.thelovespoonworkshop.com/
For regular updates about the things we are doing find us on Facebook, Twitter and Instagram by searching for The Lovespoon Workshop.
Remember to take care and ALWAYS ensure your own safety when working with wood working tools and machinery. If in doubt don't do it!!
#scrollsaw #scrollsawbeginners #scrollsawtips

Хобби

Опубликовано:

 

10 авг 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 59   
@tallxtal
@tallxtal 5 месяцев назад
Thank you!
@thesketchypumpkin
@thesketchypumpkin 2 года назад
Love the close up of this, very useful info!
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Hi, great to hear from you as always. Delighted to hear that the video was useful. Thank you for continuing to support our RU-vid channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@sherwoodlayton9595
@sherwoodlayton9595 Год назад
Thank you. I'm relatively new to scroll sawing and appreciate your instruction. Am also amazed at how easily you were able to do the scroll work using a straight blade. Well done.
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi Sherwood, great to hear from you. Delighted to hear that the video was useful. I prefer working with reverse tooth blades and my favourite blade is the Niqua speed number 9 reverse tooth blade. Pegas and flying dutchman also make the same blade. Thanks for supporting our RU-vid channel. All the very best from us all. 👍👍
@peterclifton7069
@peterclifton7069 2 года назад
Very useful. Thank you very much.
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Hi Peter, Delighted to hear that it is useful, that is the reason we share our videos with everyone. Thank you for the positive feedback and supporting our RU-vid channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@daviddavis6065
@daviddavis6065 7 месяцев назад
Hi I just seen you on Antiques road trip here in Scotland as soon as I seen the love spoon s I thought to my self if it was your family work shop and it was good see on TV nice one
@DailovespoonsThomas
@DailovespoonsThomas 7 месяцев назад
Hi David, hope you enjoyed seeing our work on the television. Thanks again for supporting our RU-vid channel. All the very best from us all here at The Lovespoon Workshop. 👍
@thesmokedeck
@thesmokedeck 2 года назад
I was listening the whole time, but I cannot lie, I liked the way you cut that piece. Well done on both ends, the cutting and the oral explanations provided Dai.
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Hope it proves useful. It took a few goes at doing the voice over on that one, so hopefully it gives an insight into the process and method we use for cutting out on the scroll saw. Thanks again for the positive feedback and supporting our RU-vid channel. All the best from us all. 👍👍
@brandonbritt99
@brandonbritt99 Год назад
Thank you 🙏
@DailovespoonsThomas
@DailovespoonsThomas Год назад
You're very welcome. Glad the video was useful. Thank you for supporting our RU-vid channel. All the very best from us all. 👍👍
@terryfoley7725
@terryfoley7725 Год назад
Beautiful work and lovely commentary.
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Thanks Terry, really appreciate the positive feedback. Thank you for supporting our RU-vid channel. All the very best from us all. 👍👍
@woodbox50
@woodbox50 2 года назад
Brilliant video! Great skill on the piece here
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Thank you, hopefully it will be useful for anyone who is interested in learning how to use a scroll saw. Thank you for supporting our RU-vid channel, all the best from us all here at The Lovespoon Workshop. 👍👍
@sejong5524
@sejong5524 2 года назад
Very good, thank you.
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Hope it is useful. Thank you for the positive feedback, all the best from us all here at The Lovespoon Workshop. 👍👍
@shawncarter7188
@shawncarter7188 Год назад
Thank you for this ! I'm looking to buy a scroll saw and this was helpful. And, nice work on the piece !
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi Shawn, great to hear from you, delighted to hear that this was useful. We work with the Hegner multicut 2s, a great scroll saw to make all sorts of things with. Thanks for supporting our RU-vid channel, all the best from us all here at The Lovespoon Workshop. 👍👍
@MaddMaxxWoodWorks
@MaddMaxxWoodWorks 6 месяцев назад
Thank you just watched your video. I’m just started and there are some great tips. I also subscribed!
@DailovespoonsThomas
@DailovespoonsThomas 6 месяцев назад
Thanks for subscribing. Hope the videos prove useful. Hope you enjoy learning to make things with the scroll saw too. It's a great machine to work with. Thanks again for supporting our RU-vid channel. All the very best from us all. 👍
@jayashkumar5941
@jayashkumar5941 11 месяцев назад
Great first saw
@DailovespoonsThomas
@DailovespoonsThomas 11 месяцев назад
It's served our family business very well over the past 25+ years. Thanks for supporting our RU-vid channel, all the very best from us all. 👍
@jaimealvarez1919
@jaimealvarez1919 2 года назад
que excelente trabajo que haces
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Muchas gracias Jaime, felices fiestas de todo el mundo aqui en nuestra taller en Gales. 🎄🎄✨✨⛄⛄🎅🎅
@aamirahmadpk
@aamirahmadpk Год назад
I am going to buy this it looks really useful
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi Aamir, well worth investing in a scroll saw. So many different things you can make. Thank you for supporting our RU-vid channel. All the very best from us all. 👍👍
@joanneg7646
@joanneg7646 8 месяцев назад
I just bought my first scroll saw very excited and a bit nervous to try it out.... I'm watching lots of you experienced ppl on RU-vid glean what I can..hopefully I'll get good at this.. 😅
@DailovespoonsThomas
@DailovespoonsThomas 8 месяцев назад
Great stuff, hope you enjoy working with the scroll saw. Let us know if you have any questions, always happy to help out. Thanks for supporting our RU-vid channel. All the very best from us all. 👍
@gurjindersingh600
@gurjindersingh600 2 года назад
Very nice degine created,,, and very useful video Sir,, salute you,,
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Thanks for the positive feedback, it is very much appreciated. Delighted to hear that the video was useful. Thank you for supporting our RU-vid channel, all the best from us all here at our family workshop in West Wales. 👍👍
@urmelausdemeis3495
@urmelausdemeis3495 11 месяцев назад
Danke
@DailovespoonsThomas
@DailovespoonsThomas 11 месяцев назад
Thanks for your our RU-vid channel, all the very best from us all. 👍
@giselyohara
@giselyohara Год назад
that is a nice video
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Thank you, glad you enjoyed the video. Thanks for supporting our RU-vid channel. All the very best from us all. 👍👍
@WayneSmith-ge6gv
@WayneSmith-ge6gv Год назад
Thank you for the advice on sprial cut blades I've switched to reverse blades much better
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hope they do a good job for you Wayne. They've certainly served us well over the years. Thanks again for supporting our RU-vid channel, all the very best from us all. 👍
@riccellipereiradossantos2674
Hi guys! My nome is Francisco Rääts and Im from Brasil and I'm 60yo and a woodworking for more than 40 years but new on scroll saw, could you help me with a question? How the best height or position to work with my scroll saw? Congratulations for your amazing work, and excuse me my poor English. Big hugs to all
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi Riccelli, great to hear from you and thank you for your kind words. Your English is very good too. When it comes to the height of the machine we like to have it around elbow height when seated. Personal preference does play a part too. For example I prefer to be closer to the machine and use a lower chair. My father prefers to be higher up so uses a bar stool height seat, as he finds this more comfortable. Hope that helps and gives a little more insight. Thanks for supporting our RU-vid channel. All the very best from us all. 👍👍
@Thankful2bCatholic
@Thankful2bCatholic 7 месяцев назад
when i was young, my brother used to do something extremely similar to this but the tool was hand-held. Do you by chance know what it is called and/or do you have any videos of this craft being done with the hand-held tool? i know the name of the tool in my language - maltese - but definitely not in english nor did i come across videos using it... He was a boy at the time and many boys used to do it - we didn't have tablets or video games back then!!!! (video games had just started and nobody could afford them so children did crafts. Boys with wood, girls with knitting! 30 years ago...)
@DailovespoonsThomas
@DailovespoonsThomas 7 месяцев назад
A Coping saw or fret saw would be two hand tools that would allow you to do a similar job. Thanks for getting in touch, all the very best from us all. 👍
@Thankful2bCatholic
@Thankful2bCatholic 7 месяцев назад
@@DailovespoonsThomas thank you for that. YES!!! That is it, the second one: coping saw!!! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SmO3P-97z8o.html - in the video it is not the tool my brother used but it is hand held too. They don't teach this in malta any more and i wish they did. (It would be a good craft to teach to prisoners and they could pass time doing something useful and beautiful!)
@GhostedbyHer
@GhostedbyHer Год назад
What's the thing that was vacuuming the dust called?
@DailovespoonsThomas
@DailovespoonsThomas Год назад
With the Hegner scroll saw you have the blower at the top that keeps the line of sight clear as you are cutting. You also have the option of attaching a dust extractor to the machine to collect the sawdust. Thank you for getting in touch and supporting our RU-vid channel. All the very best from us all. 👍👍
@samuelpuckett7954
@samuelpuckett7954 Год назад
My saw only use pin end blades. Does anybody make a round blade oin end?
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi Samuel, thanks for getting in touch. I use pinless blades myself. So not as familiar with the options that are available when it comes to pin end blades. Most of what is available for pinless blades is available in a pin end version too. Olson, pegas and record all make pin end blades so might be worth a look for what you want in their ranges. Thank you for supporting our RU-vid channel. All the very best from us all. 👍👍
@Mr-kamal271
@Mr-kamal271 2 года назад
Waw
@DailovespoonsThomas
@DailovespoonsThomas 2 года назад
Hi Kamal, hope the video was useful. Thanks for supporting our RU-vid channel. All the best from us all here at The Lovespoon Workshop. 👍👍
@stansigstad9316
@stansigstad9316 Год назад
I just bought a scroll saw but don't know how to it yet
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi Stan, great to hear from you. The scroll saw is a fantastic machine that will allow you to make all sorts of different items in wood. If you have any questions, feel free to ask. We have lots of different videos demonstrating the methods we use on our channel. Thank you for supporting our RU-vid channel. All the very best from us all. 👍👍
@nige65
@nige65 Год назад
Great vid but gee yrs voice does my head in
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Thanks Nige, glad you enjoyed the video. Thanks for supporting our RU-vid channel. All the very best from us all. 👍👍
@umaprincesainny
@umaprincesainny Год назад
How much cost the machine?
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hi again, great to hear from you. The scroll saw we use is a Hegner Multicut 2s. To buy it new costs between £800-1200. However, you can often find them on ebay for between £250-500 second hand. You can contact Hegner for any spares required too. We have 2 of them here at our family workshop in daily use. They both work perfectly after being in daily use for 20+ years. Thanks again for supporting our RU-vid channel. All the very best from us all. 👍👍
@jayantomondal5497
@jayantomondal5497 Год назад
साकलासैकि मेसिन का वेलेट भेजावा छाक्त है सार आप
@DailovespoonsThomas
@DailovespoonsThomas Год назад
Hope the video was useful, thanks for supporting our RU-vid channel. All the very best from us all. 👍👍
@user-pw1dr2fn3f
@user-pw1dr2fn3f 9 месяцев назад
as
Далее
Scrolling for beginners part 1
31:12
Просмотров 328 тыс.
10 beginner scroll saw tips
14:43
Просмотров 144 тыс.
меня не было еще год
08:33
Просмотров 2,5 млн
Макс Пэйн - ТРЕШ ОБЗОР на фильм
47:02
Scroll saw tips for beginners
12:07
Просмотров 73 тыс.
7 Scroll Saw Tips For Beginners
4:54
Просмотров 55 тыс.
15 woodworking basics you should know
13:20
Просмотров 888 тыс.
The most important scroll saw technique.
4:31
Просмотров 260 тыс.
5 easy scroll saw projects for the one you love.
14:24
How to use a Scroll Saw | Tutorial for Beginners
10:17
Woodworking: Power Tools - Why You Need a Scroll Saw
7:40
21 Best Circular Saw Hacks | Japanese Woodworking
28:24
Get Yours From Our Profile Description 🙏
0:19
Просмотров 33 млн
УДИВИЛА МЛАДШУЮ СЕСТРУ
0:50
Просмотров 3,2 млн