Seiko Watch | Watch Battery | Battery Replacement | DIY 

Try this 1. Obtain a small metal wire or a pair of tweezers. 2. Locate the "AC" marking on the watch. 3. Use one end of the wire or the tweezer to gently insert it into the area labeled "AC." 4. Take the other end of the wire or the tweezer and touch it to the battery installed in the watch. 5. If the previous step doesn't work, try this alternative: - Install the battery in the watch. - Remove the battery a few times while simultaneously resetting the watch with the wire/tweezer and the back of the battery. By following these steps, you should be able to troubleshoot any issues with your watch more effectively.

That’s a possibility. Change the battery

Short circuit discharges the battery. Why would that be done on a new battery and why is it necessary on an dead battery?

No, you have to perform the short circuit!

Look for the ⬅️ symbol on the back with a magnifying glass. Wherever it points, next to it will be a small hole that you can use a needle to push down and simultaneously pulling out the stem.

Should be quartz movement, my similar model SSB325 is Quartz

@@jasondanner6630 Appreciate it, thank you.

You’re absolutely Right

Of course Saiko watches are junk 😊

Start buying automatics. I have several vintage Seiko divers (6309 and 7s26) and they keep time as good as my Omega and Rolex and higher end watches I have.

Good point, will do next time. Thanks

😮😅