Servo Comparison Savox Power HD Turnigy Traxxas Hexfly

Подписаться 72 тыс.

Просмотров 131 тыс.

50% 1

Comparison of a few 6v servos
Specs below are copied directly from the manufacture site when possible.
Power HD 23kg
rover.ebay.com/rover/1/711-53...
Torque(4.8V): 18.0 kg-cm (250.0 oz/in)
Torque(6.0V): 23.0 kg-cm (319.4 oz/in)
Speed: 0.14 sec (4.8V) │ 0.12 sec (6.0V)
Operating Voltage：4.8 ~ 6.0 DC Volts
Weight: 75 g (2.65 oz)
Bearing Type：Ball Bearing x 2
Motor Type：Coreless Motor
Gear Type：Titanium & Steel
Operating Temperature：-20℃~60℃
Working frequence：1520μs / 333hz
Size：40.7 x 20.5 x 38.5 mm ( 1.60 x 0.80 x 1.49 in)
Power HD 20kg
rover.ebay.com/rover/1/711-53...
Torque(4.8V): 16.5 kg-cm (229.1 oz/in)
Torque(6.6V): 20.0 kg-cm (277.7 oz/in)
Speed: 0.18 sec (4.8V) │ 0.16 sec (6.6V)
Operating Voltage: 4.8 ~ 6.6 DC Volts
Weight: 60g (2.12 oz)
Bearing Type: Ball Bearing x 2
Motor Type: DC Motor
Gear Type: Copper & Aluminum
Savox 1230
rover.ebay.com/rover/1/711-53...
Dimensions(mm): 40.3x20.2x45.0
Weight(g): 79.0
Speed(@4.8V sec/60): .20
Torque(@4.8V oz-in): 416.6
Speed(@6.0V sec/60): .16
Torque(@6.0V oz-in): 500.0
Gear: Unique Steel
Bearing: 2BB
Case: Full Aluminum
25 Tooth Spline
Traxxas 2075x
rover.ebay.com/rover/1/711-53...
Metal Gear, Ball Bearing
Digital High-torque 125 oz-in.
Transit Time .17 sec/60°
L=55mm, H= 42.75mm, W=21.5mm
Hexfly HX-15s
rover.ebay.com/rover/1/711-53...
Full Metal Gear Servo 15KG, Splashproof.
HEXFLY 9KG.
Type: Analog ; Speed: .24 at 4.8v / .21 at 6.0v.
Torque: 9kg*cm @ 4.8v / 10kg*cm @ 6.0v.
Gear Type: Metal.
Turnigy 959 (version 2)
hobbyking.com/en_us/turnigytm...
TGY-MG959 V2 spec.
Control system: +pulse width control 1520usec neutral
Required pulse: 3-5V peak to peak square wave
Operating voltage: 4.8v~6v
Operating temperature range: -20~+60C
Operating speed (4.8v): 0.17sec / 60 degree at no load
Operating speed (6.0v): 0.15sec / 60 degree at no load
Stall torque @ 4.8V: 25.0kg.cm
Stall torque @ 6.0V: 30.0kg.cm
Operating angle: 45 deg. one side pulse travelling 400usec
Direction: Counter clockwise/pulse travelling 1520-1900usec
Motor type: Coreless motor
Potentiometer drive: Indirect drive
Bearing type: Dual ball bearing
Gear type: All metal gears
Connector wire length: 12in
Dimensions: 40.2 x 20.1 x 36.8mm
Weight: 2.64oz. (78g)
Spline Count: 25

Развлечения

Опубликовано:

7 мар 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 315

@oliverg.201 6 лет назад

Love Your Tests, good Work, That helps a lot of people, thank you

@gingersnap2121 6 лет назад

Dude i love how ypu scientifically test stuff man its awsome

@ExocagedRC 6 лет назад

Thanks I appreciate that.

@noeysfastrc3291 6 лет назад

Nice test revealing the strength of the servos no one has done before. Appreciate you sharing your video 👍

@ExocagedRC 6 лет назад

Thank you. Spread it around and if it does good I’ll be able to buy more servos for future tests.

@mikekopisz1227 5 лет назад

Great comparison vid! That 959 is a beast!

@Bawla187 6 лет назад

OMG that was awesome test. Traxxas should be ashamed putting that in our cars.

@ExocagedRC 6 лет назад

LoL yeah it’s really weak and have a very poor reliability record too.

@johndonovan7018 5 лет назад

traxxas has a lifetime goal of producing/buying the shittiest servos they can find. its kinda their thing. thats how you know you have an authentic traXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXas

@johndonovan7018 5 лет назад

@@westernsharpie well traxxas is renowned for shitty ass servos, especially the micro ones they use for shifting and accessories. those arent just weak, they flat out burn out. technically you SHOULD NOT be able to turn the wheels on carpet in standstill. try turning your irl car wheels on a glue patch. thats how much traction carpet provides. not to mention RC tires are literally glue tires, 1000% unrealistic. so thats actually realistic that it cannot overpower terrible scale physics. to a reason

@lazergri 4 года назад

If you look at traction/power = traction/(voltage x amps), Traxxas servo isn't bad, it has approximately the same ratio, it's just less powerful. And yes I have a TRX4 equiped with it, it's powerful enough to steer on any surface, in fact it's powerful enough to break the f***ing plastic servo horn that's originaly installed. THIS plastic part is the real shame.

@EXTREMERC416 4 года назад

You pay a lot for traxxas they include junky servos lol

@MrSUBY25 6 лет назад

Great comparison between the servos. This was very informative.

@GCMRacing1 6 лет назад

Best video this year! Excellent!

@ExocagedRC 6 лет назад

Thank you. Spread it around because if it does good I have no problems buying more servos to test. One guys mentioned getting a few of the super cheap servos to try.

@CarminesRCTipsandTricks 6 лет назад

Have you done any cheap ESC tests? Not the "320 AMP EvilBay Special".... 😱 Like Hobbywing Quickrun, Brushless and Brushed, 60, 80, 120amp, Sensored and Sensorless.... GOOLRC, ESC and ESC/4-Pole combos, Panther ESC..... and the like... I wouldn't put them up against Castle or Tekin, but maybe Traxxas, and other mainstream middle range, popular ESCs. There's quite a few people I know on Forums, that keep asking about Budget ESCs.... How do they do, features, and if they're even worth it. Although not entirely scientific, your tests are balanced, fair, non-biased, and most importantly, SHOW even to the novice, the performance they should expect from the products you have tested!! 🍺🍺👏👏👏👏👏 You're like the *Consumer Reports* of our Hobby!

@BMJAUDI 5 лет назад

Very well done! And all the info you put in your description as well...👏🏼

@ExocagedRC 5 лет назад

Thank you

@wereallydontknowwhatweredo5038 5 лет назад

That servo test rules! I lost another bet too. Keep up these comparison tests, I have to win at some point! Oh yeah, awesome video too!

@ExocagedRC 5 лет назад

lol you should see my tire test videos

@kingstonrc329 6 лет назад

Dude that is awesome man, great job 👍🏻super cool 😎. Great test!!!!

@ExocagedRC 6 лет назад

Thanks

@monchitoscalecrawling5035 6 лет назад

A hobbywing 1080wp esc has a internal Bec with enough voltage for a savox 1230. Love your videos, specially the tire test ones. Keep up the good work

@ExocagedRC 6 лет назад

I think they are rated to 3A which is pretty good but if you fully stall a Savox I’m sure it would brown out however normal driving doesn’t stall a good servo so yeah I can see it working fine.

@CentralVAracer 6 лет назад

Absolutely great test! Keep up the good videos!

@ExocagedRC 6 лет назад

Thanks and yeah dude your username says it all. Tekno!!

@montesamapping 4 года назад

Really interesting, fast and direct information !!

@trailcrawler2038 5 лет назад

Going back through all of your servos you've tested, what is your favorite crawler servo that is waterproof?

@STEVOD313 6 лет назад

Awesome I’ve been trying to figure out the best servos for my projects,very helpful! Thanks bud👍👍👊👊📹📹

@ExocagedRC 6 лет назад

You’re Welcome. The best bang for the buck in this test is the 20kg Power HD

@need4drift 5 лет назад

Great test. Thanks for sharing!

@coreykurtz1404 6 лет назад

Nice comparison, enjoy your Channel!

@BudgetRC_Channel 6 лет назад

Awesome test! I put the 959v2 on my Gen7 and it's great! I haven’t bound it up in the rocks yet, but under every condition I've put it through it hasn't stalled or browned out on the stock ESC. Maybe I'm not hard enough on it!

@ExocagedRC 6 лет назад

yeah the 959 servos are awesome, I run them on my C3 4ws truck, Bouncer and on the monster truck I did the radio test with, no servo savers and no failures. Absolute beast servos.

@Darkcruzer23 5 лет назад

very helpful! had a hexfly die on me and was looking at the power hd 20 looks like its a great upgrade!

@ExocagedRC 5 лет назад

Just didna video on another 20kg and I’m Collecting more cheap servos for a future video soon.

@RobKingRC 2 года назад

This was a fun test, like to see an updated version.

@joshwalker1806 6 лет назад

Great job on the test. Great setup. The factories should start sending them to you as they get updated ones that they want to prove and showoff.

@ExocagedRC 6 лет назад

That would be awesome if they did.

@MrTRA504 6 лет назад

This video is pure gold 👍🤗

@charlesswank6401 6 лет назад

Maaaan, my servo sucks, haha! (The same Traxxas you tested). Thanks, this was informative.

@GeneralHobbies 6 лет назад

excellent test. i wish you had more servos

@ExocagedRC 6 лет назад

If this video does well I have no problem buying more to test out. I have a few HV servos already so maybe I can get that one done next week.

@drongojonkins8945 6 лет назад

Excellent test.

@mindless666666 6 лет назад

please add DS3218 and PDI-6221MG cause these are dirt cheap and seem to have enoough torque

@ExocagedRC 6 лет назад

I’ll check those out. Also want to try some other dirt cheap servos, maybe I can get some smoke out of them. LoL.

@rennestrubberg9737 4 года назад

Hey man did you ever find out what was up with the powerhd 23kg ? Thanks

@fastkrt10 6 лет назад

Nice Set up and test

@Joemonster111 5 лет назад

Great comparison! You have a subscribtion!

@RC-Flight 2 года назад

Thanks for the video! So it’s hard to tell but did any of these servos tested by you pull the manufactures stated torq? It would be nice if your torq ratings were listed in your comments with the manufactures specs for easy comparison!

@krashkingrc9715 6 лет назад

Awesome test really show the different amps per pull great video definitely a cool comparison

@ExocagedRC 6 лет назад

Thanks, I hope this video catches on so I can buy more servos to test with.

@krashkingrc9715 6 лет назад

Exocaged RC cool would like to see the k5 20oz and 23oz servos there cheep but do good

@ExocagedRC 6 лет назад

I'll have to look them up

@justincase948 5 лет назад

Awesome test man 👍👍

@yorkrojas1452 3 года назад

Awesome rig dude!!

@wildservenpc3816 5 лет назад

Excellent and very useful video, thank you. Just one lay question. What did you connect each signal wire to?

@ExocagedRC 5 лет назад

Thank you and they were simply plugged into the receiver like most servos are.

@MRBRUSHLESS 6 лет назад

Awesome video very nice comparisons great job thumbs up 👍👍 liked and subbed

@ExocagedRC 6 лет назад

Awesome thank you.

@floppychzcake7936 5 лет назад

i put the Power HD 23kg in my TRX-4 and it works like a dream, its been through hell and it still works like its brand new. definetly a great servo for the TRX-4 if you dont want to spend a fortune.

@andjusticeforall8813 2 года назад

Same, very happy with it Also highly recommend their brushless storm 3, put one in my revo 2.0, it’s a beautiful servo for the money

@MrKingNica 5 лет назад

That was pretty awesome. I dont know exactly what im reading on the top right. But so cool nonetheless.

@edwardcorbett5170 5 лет назад

Excellent test and video! Based on this (pretty much on its own) I chose the power hd 20 (instead of savox or cys) as my “budget” first upgrade for the useless and rapidly dying servo on my FTX mauler... I’m super impressed with it! The test was not necessarily “comprehensive” with only one of each servo, but definitely fair! Who is going to buy a whole box of each servo and run them regularly? We buy a few different servos maybe, like this test, and we learn from the company’s first effort.

@ExocagedRC 5 лет назад

Yep I’m working on a test with the Reef’s 555 and it’s the strongest servo I’ve ever tested by far. You’ll see it when I get it all done and edited.

@northmatt2206 6 лет назад

Great video. Simple demonstration but gets the point across. I was looking at the power hd 23, but looks like the power hd 20 is the way to go in replacing the traxxas one in trx 4. Subbed 👍

@ExocagedRC 6 лет назад

Awesome thanks for the sub. I was shocked the 20kg did so well.

@arushkapoor535 6 лет назад

Yo dude you are my favorite RU-vidr you are bos

@RCPropaganda 6 лет назад

I have a savox 1210sg and am running no bec. I do not have a lot of time on it but have not had a issue. You should make a video on how to set up a bec. I did not do that because I was clueless. I just threw my servo in there and used the truck.

@ExocagedRC 6 лет назад

good idea on the bec video, I have a bunch of them so maybe, the simple way is to just power them from the main battery and plug them into the receiver, you need to remove the red wire from the esc and you're good to go, if you have a high voltage servo and want to power that but have a 6v receiver you can power it around the receiver. I would think there are a ton of videos on how to do that already. I'll check and see.

@davidjones7544 6 лет назад

Great video, subscribed!

@henrytaylor3049 6 лет назад

Great vid very interesting

@Meesochan 4 года назад

It's really helpful! Thanks~

@Trex450S 6 лет назад

Excellent testing methodology... Do more and then give everyone an Excel spreadsheet for reference. That would be really helpful! I am thinking of doing the same for ESC's.

@ExocagedRC 6 лет назад

I’m working on test rigs for esc’s, motors, bec’s and lipos. Just takes time to get them all set up and functional.

@allinthefamiliy3122 5 лет назад

Is that pulls strength in Kg? or in pound?

@kirkleaman6863 5 лет назад

Iam new to the crawling I just orderd the castle 2850 is this a good choice for the trx 4 bronco love your videos thank you

@ExocagedRC 5 лет назад

Ok. I’m assuming you got the Mamba X with 2850kv combo correct? If so just use the stock pinion and 2S-3S and with that esc you can run any servo you want without issue. When you get the esc there should be a card in the book you can use to get a free castle link you’ll need to adjust the esc with your computer. The strongest 6v servo I’ve seen so far is the REEFS Triple 5. I have a video on that as well as the 3BRC G13 you can look at.

@hannaiskandar3238 4 года назад

hello did you test the savox SB-2290SG?

@hardcoretam 6 лет назад

Excellent video as always. I have a few Powder HD 20Kg's and only 1 of the 23Kg versions. I didn't notice any difference torque wise but i only run 1.9's and don't get into binds often with them. In the defence of the 23kg one with the extra price, is it does feel a lot quicker and more responsive and the titanium gears are nice. I guess it's still working at around it's rated value, but it's interesting the 20kg performed better and is also rated for higher voltage.

@ExocagedRC 6 лет назад

Yeah they are both rated for 6.6v. I just stuck with 6v to try to have some form of control over them. I should have a high voltage test recorded next week. Probably be edited together and posted the following week.

@Angel-dn9sm 6 лет назад

Great video

@mark-mj5dl 6 лет назад

I love the disclaimer, very non bias and professional. excellent test, but i am curious what is the rated speeds of these servos also?

@ExocagedRC 6 лет назад

I doubt there would be much difference in speed between these but I think the Savox was a bit faster than the others.

@LukesVintageRC 5 лет назад

Great video sir👍

@antonellazito3465 6 лет назад

Great video! just wandering...how do you control these servos? may I use an arduino maybe?

@ExocagedRC 6 лет назад

I was simply using a radio and receiver for this test.

@ThatCrazyRCGuy67 Год назад

I got the Power HF servo..and it goes to 6v..and the Arrma goes to 7.4v..can i run at that .or do i have to change to 6v? THANKS

@timmyd463229 5 лет назад

You think the power hd is good for a arrma notorious/kraton? I know it’s not super fast. I just want to be able to turn while while in dirt going decently fast

@shanedwyer2845 6 лет назад

I've been impressed with my powerHD 20kg servos. I have one in a 4x4 stampede and one in a Brushless Savage and it does fantastic in both rigs!

@ExocagedRC 6 лет назад

Yeah I got the 20kg in my Proline ProMT and it’s doing great

@rendra2664 Год назад

How about endurance now? It's still going well today?

@shanedwyer2845 Год назад

@@rendra2664 The one in the stampede is still going strong 4 years later. The 3 I put in the savage kept stripping gears, but that's quite a large vehicle and I drive hard.

@artistman75 3 года назад

I would love to know why some servos are so loud, while others are nearly silent.

@johnclc_8869 6 лет назад

I have the power hd 20kg servo for my scx10 and its very strong and u cant beat the price!!!!

@juniorwest4138 6 лет назад

Amazing 👍

@bigchungus-oj8zz 5 лет назад

Thank you SO MUCH! What an eye opener! I need to replace my Traxxas TRX4 servo, it sure feels weak, now I know why...I usually run Savox 1230 wp metal gears. Have you tested that? I'll look through your videos. Definitely a Subscriber now!

@ExocagedRC 5 лет назад

there is a savox 1230 in this video, thanks for subbing

@jamesstubbs8954 4 года назад

Power HD is the best bang for your buck out of all those servos which is why you were surprised. I have two Power HD DW-25LV in my E Revo 2 and while they were just 10 bucks cheaper than the Savox 1256TG's I was going to purchase they have way more torque and faster response time than the Savox servos.

@darrenjackson6207 5 лет назад

GOOD VIDEO BRO THANKS !

@Cultralight1 6 лет назад

Very interesting test!

@ExocagedRC 6 лет назад

Thanks. I’ve never seen them tested like this so I did it.

@Cultralight1 6 лет назад

Yes, that`s true!

@ShenRC 6 лет назад

😊👍Good info.

@oliverstoys8411 5 лет назад

Nice video and demonstratio👍I have a rc4wd rtr cruiser, the esc come with it outcry with external bec 6volts with 5a output, What would you recommend for a servo for this? My stock servo seems to be ok, but there some situation or scenario you know it can't handle the weight of my truck(11lbs)

@ExocagedRC 5 лет назад

I’d give the Power HD 20kg servo a try. Now if you have a big enough budget, go for the 3 Brothers RC G13 servo.

@oliverstoys8411 5 лет назад

Exocaged RC thanks😃

@LukesVintageRC 5 лет назад

I’m wondering if the power hd LW 20 and 23 labels got mixed up at factory in China🤔

@ExocagedRC 5 лет назад

anything is possible

@Serafim8 6 лет назад

Thanks men

@BWWGL9 4 года назад

Hi, is the LW20MG a "STANDARD" Size Servo or Mini ? What Servo HOLDER/BRACKET would I need to run the LW20MG in a Boat just for steering?

@ExocagedRC 4 года назад

BWWGL9 it’s a standard size so it should bolt right up

@johnbeck7618 4 года назад

I nominate this to be the best video of 2020 , no frills; just fact! bravo,

@bilbobaggins9743 6 лет назад

Just wondering, is there a noticeable power difference between the Traxxas 2075 and the 2075X? I understand the X model has metal gears, but is it more powerful? Also, are the sizes the same?

@ExocagedRC 6 лет назад

Not sure, if the only difference is gears then they should have the same pull.

@timothyp389 2 года назад

Where did you get that servo tester? Did you build it yourself?

@obee69242000 4 года назад

for the power hd test in one of your other videos it was only i think 256 on 7,4 volts in this video its over 310 on 6volt just want to no whats up with that cause i was thinking about getting that one but id like to no what it really does

@ExocagedRC 4 года назад

Although they were labelled the same, they were physically different servos, some are stronger than others of the same specs. A prime example is the Turnigy 959, the V1 is way way better than the v2 as they went cheap after release and getting a good name, we could be seeing the same thing with these servos.

@joeschmo2393 6 лет назад

That’s an awesome test station.

@ExocagedRC 6 лет назад

Thanks. I’m working on a motor dyno and should have that up in a few weeks.

@joeschmo2393 6 лет назад

Exocaged RC cool I’ll be looking foreword to seeing that

@SnarkyRC 5 лет назад

Great video. You should test a Promodeler DS470BLHV servo.

@ExocagedRC 5 лет назад

I wish I had the money to buy servos that are suggested, I have sent them a message asking if they woul dbe interested in a test video by me but no response.

@TommyRC 5 лет назад

Hi, where to buy your servo tester? Thanks.

@ExocagedRC 5 лет назад

There are only two of these in existence and neither are for sale. The components are cheap but building it all tonwork together makes it too expensive to sell.

@skaargan 5 лет назад

How does the gear holds up for that turnigy 959? Im planning to use it for 1/8 buggy

@ExocagedRC 5 лет назад

Gear holds up great but for a 1/8 Buggy I’d go for something faster

@jasonjoy3990 6 лет назад

Nice test thank you I bought the 23kg power HD for a couple of my trucks an I seem to like them so far only 30 bucks for a servo like that I think is a great deal oh an can u test the savox sw-0231mg water proof servo against that traxxes servo because that seems like a good servo for the price

@ExocagedRC 6 лет назад

If this video does well then yeah I can test that, I'd bet my money on the 0231 being stronger. Like and share this so I can do more servo tests.

@lmt200ish 6 лет назад

HI, I just purchased a power HD for a slash and was watching your video. I see the traxxas only pulled 2.5 amps and the HD 6 give or take. The factory esc spec is only 2.5amps so wondering if there is any gain if the servo can only be supplied 2.5 amps anyway. The test was to fast to see where the servo was pulling at 2.5 amps. I am new to rc's so could I be missing something. A test at 2.5amps if that's all that could be supplied?

@ExocagedRC 6 лет назад

What happens when the servo pulls too many amps from the esc, it causes a brown out, a brown out is when the receiver voltage ( same as servo gets ) drops below the minimum voltage required to function, everything turns off and the system restarts. In your case you may never stall the servo so you may not have an issue at all. In a scaler it could be a problem.

@lmt200ish 6 лет назад

Thanks, it probably wasn't worth changing then, except for the metal gears in my case. Amps being equal, they probably pull about the same just more potential with different bec.

@PerchEagle 5 лет назад

the intro music is part of the childhood gaming experience 👍 ding dong the sycho is gone ... wait now seriously, I've searched about one of the savox servos, one for $57 !! wow but this one 4x servos for $40 4X JX PDI-6221MG 20KG Large Torque Digital Coreless metal gear Servo For RC car TRAXXAS baja boat Robot airplanes are they as good ?

@timholcomb4478 6 лет назад

thanks man answered a lot about a Bec for me i have the 72 bronco vaterra ascender that needs more servo think I'm gonna go with the power HD 20 kg think it's funny it out preformed the 23 kg I live in central FL and just missed the expo is there a way I could see all the event or website that would have them

@ExocagedRC 6 лет назад

They have a Facebook page. Did you see the videos I posted of it? I think I have 3 on here from the uste.

@timholcomb4478 6 лет назад

yes I did and thanks for the video of it gonna try and go there one day to see there course I don't use Facebook try to avoid it

@timholcomb4478 6 лет назад

oh I almost forgot do u have an address for Jax RC recycle and repair

@ExocagedRC 6 лет назад

Here is his Facebook group. Name is Sean Larmond and he works out of his home. m.facebook.com/groups/1474016102841179

@ExocagedRC 6 лет назад

Unfortunately most RC communication is through Facebook. I wasn’t on Facebook at all until I got into the hobby, now it’s almost a must have to keep updated with everything. Manufactures and all that are on there with their on groups and new releases.

@knoxmotorsports 6 лет назад

The MG595 sells rated at 480 oz of torque ,Made by Tower Pro , I use it for a winch when I can get them from Tower Pro...When they first came out the board and motor soldiered together board had HiTech name on it the later servos now have smaller board but same hi power motor ,, Its a good servo pretty tuff have one in Wraith and grand son beats the heck out of it ...

@ExocagedRC 6 лет назад

There are so many servos out there that are good and great, i doubt I'll ever be able to get to even half of them.

@johnanthony4856 5 лет назад

Excellent price to performance from Power HD 20Kg

@danflores7691 4 года назад

excelente vídeo. podrías por favor poner el link de compra o el nombre del medidor de fuerza que utilizaste para hacer la prueba a los servos ???

@ExocagedRC 4 года назад

its just a digital fish scale from ebay this one will work fine for it rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FFish-Scale-Portable-Scale-LCD-Digital-Weight-110lb-50kg-with-measuring-tape%2F293119491100%3Fhash%3Ditem443f487c1c%3Ag%3AVRUAAOSw9ANdSRoY&campid=5338273090&toolid=20008

@quemeese 3 года назад

if I am not using this in a RC car, how would I activate it?

@rcmod642 4 года назад

thanks

@andyhamilton2202 5 лет назад

Could you do this without the BEC? Use like a sidewinder 4? See when it browns out? And use one of those receiver glitch busters to see of that changes anything? Very curious!

@ExocagedRC 5 лет назад

Andy Hamilton pretty much each of these servos would brown out the sw4 at full stall like this. The glitch buster is only good for a couple seconds, the sustained loads would still give you a brown out.

@andyhamilton2202 5 лет назад

@@ExocagedRC oh really? I'm just dipping my toes into the world of high powered servos. Thanks for the video it was very helpful.

@ExocagedRC 5 лет назад

Andy Hamilton yeah man the Reef’s servos seems to be more efficient than most others. I have a bunch of videos on my channel about servos and lipo testing. Take a look for them.

@radziohan 3 года назад

i dont know if i undersand it right, but, did this servo Turnigy 959 had power liftign/pulling of 480> and more kg? i mean it can hold and pull this high amout of weight? really?

@ExocagedRC 3 года назад

according to the scale its strong but also amp hungry

@carlospachon4609 3 года назад

Which one os faster? Which moves faster?

@user-np4iv6ii1l 6 лет назад

Hey Exocaged as I dont have many rc buddies to ask questions where im at maybe you can answer one for me if you dont mind. I have a SPEKTRUM A3060 digital servo on my Losi Night crawler running a Castle 10amp BEC. Now the BEC is factory set at 5v and i do not have the castle link to adjust voltage. Just starting to get back into the sport again. Do you think from the 5v to rated 6v of the servo im losing much in torque?

@ExocagedRC 6 лет назад

That’s about a 20% voltage difference so yeah you’re not getting all that the servo can take. I tried to look up the servo numbers you posted to find specs but didn’t find it.

@user-np4iv6ii1l 6 лет назад

Ha you will have to excuse my typing haha. How about A6030. Might work a little better. Thanks though.

@ExocagedRC 6 лет назад

Cool. If you have the funds, get the Turnigy 959v2 servo ( I have a video of these ) and get a castle link to bump that bec up to 6.4v and you’ll love it.

@user-np4iv6ii1l 6 лет назад

Well that's what prompted this I have been starting to watch a number of your vids. Really want to get the new trx-4 79 bronco next. I like how yours are setup up for double duty. Going fairly fast and crawling. I really like the new Redcat gen7 also but I love the ability to have high/low and selectable diff locks from remote. For a Jeep guy like me that's absolutely awesome. Also was looking at a Summit but kind of like the solid axles of the trx-4. I would say the Summit is better at going fast and then can crawl also where the trx-4 is meant to crawl more but can go faster as well if you understand what i mean. You know the Losi is no speed demon no matter what you do so some speed would be welcome. Then i started watching your servo test videos and noticed the voltage and that Turnigy already stood out. About half the price of this Spektrum i bought. Keep up the awesome vids and thanks for the replys.

@ExocagedRC 6 лет назад

yeah bud, the Summit is an old platform and if I were you, I'd go with the TRX4 Bronco. If you get to the point where you want more radio I hack and sell 8ch GT3c radios. I have a few older videos on those as well.

@kirkleaman6863 5 лет назад

If I put the power hd 20 in my trx 4 bronco do I need to do the BEC upgrade

@ExocagedRC 5 лет назад

Hard question to answer. If you drive in the rocks then yes, if you are trail riding then probably not. Traxxas has a bolt in BEC for these trucks and I have a video on it and their new 400oz servo. Check my channel for that video, super simple no solder instal for their bec.

@richardsalinetrojr1957 3 года назад

I recently bought a agf rc servo for my speed run slash 2wd.one I bought is only rated at 14.5kg-cm(202oz-in)@8.4v with a speed of 0.062sec/60⁰@8.4v.the agf is brushless with a solid aluminum housing with strength steel and titanium gears with double ball bearings.being that im using the castle mamba monster 8s esc im running servo at 8v and it responds super fast and im almost certain it has more power then what its rated cause when I change out gearing to bash it around it snaps the front tires around like they're not even there.running the dboons tires from the arrma infraction so bigger wheel tire combo compared to stock 2.2 slash wheels.love this servo so much I actually bought 3 more for my no prep drag build and to have 2 spares in toolbox just in case.lol.will also be buying some bigger ones when I start a crawler build especially since the crawler servos agf makes can be plugged directly into a 2s lipo so you can run them at 8.4 volts without a bec not to mention ones i looked at are 55kg-cm.little pricey but imo well worth it.the 4 I bought for slash speed build and drag build is the AGF-RC A62BLS and was $83 each and the 55kg ones i plan on using for crawler build are around $115 each.

@ExocagedRC 3 года назад

Yeah times have changed a lot since this video was made. Much much better options it there now.

@hayabusa2785 5 лет назад

Is that kilos on gauge? Example Power HD pulling 230kg or 23 kg

@ExocagedRC 5 лет назад

its showing ounces of pull, so you'll have to convert it to KG

@alejandroayalahernandez1398 4 года назад

Are all of them waterproof ?

@RES9CUE104 6 лет назад

So power hd wp 23kg won't need a bec for my traxxas trx4?

@ExocagedRC 6 лет назад

I've read where some run it without and its fine, if you bind it up in the rocks it may brown out the system, if you're just messing around in the woods and trails you may be fine.

@Der_Alte_Fritz 5 лет назад

I put one into my trx4 Defender after the stock servo died. The rig weighs in at 9lbs 6oz and so far I have not had any trouble with it. I do mostly trail crawling over roots and hill climbs, no serious rock crawling.

@westernsharpie 5 лет назад

@@Der_Alte_Fritz good to know

@rcnormandie14 6 лет назад

Hello do you think that the POWER HD LW-20 MG would be enough and resistant for a TRX4 with a little more than 700 g of added

@ExocagedRC 6 лет назад

It would be a lot better than stock but if your budget can handle it, go for the 3 Brothers RC g13 servo. It gets power straight from the battery and is quiet and awesome. If budget doesn’t allow that, consider the Savox 1210sg if you must have waterproof.

@rcnormandie14 6 лет назад

The Savox 1210sg and the Power hd lw-20 mg make both 20 kg what is the difference between the two for the Savox 1210sg that the Power hd lw-20 mg? Please

@ExocagedRC 6 лет назад

Usually the better brand, which is Savox in this case, is more durable than a cheaper brand. It basically comes down to your budget. If you are on a tight budget, then go with the 20kg power HD and go have fun.

@rcnormandie14 6 лет назад

Thank you very much for all your answers and information. I start crawling, I'm not yet educated enough about it. Thanks again.

@juanpa980 5 лет назад

What would you recommend for my HPI savage 4.1 k series?

@ExocagedRC 5 лет назад

Savox 1230 or 1231

@ExocagedRC 5 лет назад

rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FMega-Combo-Savox-SA-1230SG-Servo-Glitch-Buster-Aluminun-Horn%2F392127351244%3Fhash%3Ditem5b4c9c89cc%3Ag%3ACAcAAOSwG~VboyGo%3Asc%3AUSPSPriority!32068!US!-1&campid=5338273090&toolid=20008

@ExocagedRC 5 лет назад

rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FMega-Combo-Savox-SA-1231SG-Waterproof-Servo-Glitch-Buster-Aluminun-Horn%2F382568934541%3Fhash%3Ditem5912e2ac8d%3Ag%3Ac1YAAOSwEDJboyGq%3Asc%3AUSPSPriority!32068!US!-1&campid=5338273090&toolid=20008

@ExocagedRC 5 лет назад

rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FSavox-SV-1272SG-Monster-Torque-HV-Unique-Steel-Gear-Servo-w-Free-Silver-Horn%2F362007657723%3Fhash%3Ditem5449567cfb%3Ag%3AKvYAAOSwrpJb5We7&campid=5338273090&toolid=20008

@chillyboy2008 6 лет назад

Should i put a power hd 20 kg on my tr4? Should it be with a bec or without? Can it turn the wheels in place at msx range? There are 3 questions :D thx in advance

@ExocagedRC 6 лет назад

Many people run the 20kg with no additional bec so give it a try. It’s way way better than the stock 2075x servo.

@ExocagedRC 6 лет назад

Plenty of 20kg servos here to choose from, make sure you buy inside the US unless you are somewhere else, the blue ones are waterproof. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_from%3DR40%26_trksid%3Dp2380057.m570.l1313.TR1.TRC0.A0.H0.Xpowerhd%2B20kg.TRS0%26_nkw%3Dpowerhd%2B20kg%26_sacat%3D0&campid=5338273090&toolid=20008

@chillyboy2008 6 лет назад

Im from Romania, thx for your response.

@ExocagedRC 6 лет назад

Ok yeah you may want to order from China.

@scredh 6 лет назад

Hello everybody. I am French and totally beginner in RC. You advise me that it servo for a TRX4? Please.

@ExocagedRC 6 лет назад

assuming your truck is stock, you should try the Power HD 20kg as shown in this test, its about $20 and many people fine it works without an additional external BEC. If you go too high on servo an external BEC is required.look in the description as there are links to the servos used in this test.

@scredh 6 лет назад

Thank you very much for your answer and for your really informative video

@SargeScum 5 лет назад

"One of them may die" LOL

@possumpig4754 5 лет назад

I have a traxxas slash 2wd vxl. I’m pretty new to the hobby and my servo broke. It only turns one way and I was wondering what servos would work for my car. I have a 2s and a 3s battery

@ExocagedRC 5 лет назад

Whats your budget for a replacement?

@possumpig4754 5 лет назад

Exocaged RC 35usd

@possumpig4754 5 лет назад

Exocaged RC I could go a bit higher though

@ExocagedRC 5 лет назад

I see this one on ebay, these are all crawler servos in this test so they are a bit slow. I'll look when I get home I may have a few stock servos if you're interested in those. rover.ebay.com/rover/1/711-53200-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.com%2Fitm%2FHigh-Speed-MG-Servo-for-1-10-ECX-Ruckus-AMP-DB-MT-Torment-Boost-Circuit-4wd-2wd%2F372581565796%3Fhash%3Ditem56bf978564%3Ag%3ARcEAAOSwEzxYdYH2%3Ark%3A1%3Apf%3A0&campid=5338273090&toolid=20008

@possumpig4754 5 лет назад

Exocaged RC okay thanks a lot!

@CarminesRCTipsandTricks 6 лет назад

Well.... THAT sold me on the Power HD 20!! I mention too often, how severely limited my budget is. That *$20.00* Servo keeps impressing me!! 👍👍 That was a solid test. They might not have been scientifically perfect - BUT, they were compared even and fair, on that Rig you put together. Quite impressive setup! I see one dislike.... MUST be a Butthurt Traxxas fanboy! LOL!! I don't have a personal opinion of Traxxas.... But some of the blinded fanboys believe they were Blessed by Christ himself!! Doesn't matter WHAT any facts might say. That was really a good, fair Test!! Carmine 🚂 PoorManRC

@ExocagedRC 6 лет назад

Yeah I was disappointed in the traxxas servo. And yeah I’ve got another 20kg ordered for a project. It was awesome for sure

@mexicanbatman666 6 лет назад

i have a power HD20kg in my TRX-4 it replaced the stock servo that died, its a little bit better, but at the price it is its heaps better, it needs an extension lead on the trx4 though, i also have one in my other cars, cant complain for $20, if i was racing id use something better, but crawling and bashing its a great servo

@onemansvideos2134 6 лет назад

Im just curious how well the 20kg would turn some 3.8s...the 1/8th version tho

@CarminesRCTipsandTricks 6 лет назад

craig mcclellan - I would say, if your Rig is less than 7lbs.... Probably. If more, I'd look at 300in lbs or more. Servo Speed isn't as important - unless you're a serious Competitor. You DEFINITELY want ALL Metal Gears!!! (leaves out Traxxas!)

@onemansvideos2134 6 лет назад

Its probably 20lbs+ ima say its bout the same size as the losi xxl2...its an old smartech tornado brushless conversion

@johnbeck7618 6 лет назад

Hello, excellent test. Are the unit of your fish scale in Oz-inch? The savox 1230 listed at 500oz-in at 6v; if your scare is correct , it only manage little over 350; it’s my trusted Servo for many years, I may have to rethink this...

@ExocagedRC 6 лет назад

It’s in ounces yes. I’ve read that Savox and many others rate their servos based on a dynamic reading. So basically it’s a peak measurement not a real sustained measured pull like I did.

@ExocagedRC 6 лет назад

If Savox gets the job done for you stay with them. I use some Savox in different places.

@johnbeck7618 6 лет назад

Thank you for feedback, i mainly use two savox servos, 1230 and 0236. I probably have 18-20 savoxs; they have been consistent for me, thinking they are super strong, but these tests are eye opening! One thing I did learn from your experiment is to move the rod hole closer towards inside, makes that much difference. Instead of using end point adjustment, move the throw inside first... brilliant

@ExocagedRC 6 лет назад

Awesome. I run the inside hole in most every scaler I have.