In the 4 years that I've had my Glowforge laser cutter, I've upgraded the ventilation system twice. I started with the original setup venting out of my window and upgraded to their portable filter, which made a big difference. Now, I've upgraded to an AC Infinity S6 Inline Fan setup that performs very well and is very quiet.
Here's how I setup the inline fan for my Glowforge and below are links to all the materials I used for the project. For disclosure, these are affiliate links which means I earn a small amount from each purchase at no additional links to you. This is how I support this channel and purchase materials for my projects. Thanks for your support!
Inline Fan Materials:
AC Infinity S6 Inline Fan: amzn.to/3vLj3mh
4" Flex Duct: amzn.to/3nwvOxf
Foil Tape: amzn.to/3GqmALG
Stainless Steel Duct Clamps: amzn.to/3Cks7B4
6" to 4" Duct Reducer (Get 2 if you need to reduce to a 4in duct at your window, but only 1 if you can go out of your window with a 6in duct for maximum airflow): amzn.to/2ZqyUuT
If you're going with a setup like mine where you want to split your duct, I purchased these additional materials:
4 Inch Duct Splitter: amzn.to/3mcVCPv
4 Inch Backdraft Damper: amzn.to/3BhP3Q3
Alternate to the 4inch backdraft is this manual blast gate shut off that you need to close and open yourself: amzn.to/3CmBKyY
Other Resources:
Glowforge Laser Cutter - glowforge.pxf.io/0ZzgeJ
Glowforge Guide - www.ungstudio.com/glowforge
Digital Files: www.etsy.com/shop/UngStudioDe...
Tools and Materials: www.ungstudio.com/resources
Skillshare Leatherworking course: skl.sh/35YXmC4
Camera Equipment:
Camera - Canon EOS 80D - amzn.to/3aEEUAm
Microphone - Rode smartLav+ - amzn.to/2JBScBF
Music - bit.ly/2YqMCuA
Some links I've included here are affiliate links, which means I make a small amount for purchases made using them at no additional cost to you. This is how I support this channel and my hobby of designing and making unique projects. Thank you for your support!
Follow me:
Website: www.ungstudio.com/
Instagram: / tim_ung
Facebook: / timungstudio
Timestamps:
0:00 Inline Fan and Materials
1:18 Inline Fan Pre-Setup
4:07 Glowforge and Inline Fan Installation
5:40 Comparison: Glowforge Filter Vs Inline Fan
#Glowforge #LaserCutting
13 июл 2024
