Тёмный

SH3118B Grease Tray 

Grill Girl by GrillPartsSearch.com
Подписаться 1,4 тыс.
Просмотров 15 тыс.
50% 1

Over the past year, we've had a lot of people asking about the grease tray for the Master Forge grill model SH3118B. We couldn't find a good replacement from the manufacturer so Grill Girl jumped in to find the answer!
We ordered the entire grill bottom (cost of about $200!) from Master Forge and attempted to remove the grease tray from the grill. We were hoping GrillPartsSearch.com could make a higher quality replacement for us and everyone who needed one!
Unfortunately, the grease tray and the bottom of the grill itself are one-in-the-same. The grease tray is riveted to the sides of the grill which means you can't unscrew it from the grill.
This means that to replace the part you would have to replace the entire bottom of the grill. The price of that part is so expensive that in this case, it is better just to buy a new grill.
Cleaning out the bottom of the grill every few months, or after a lot of grilling, will help keep your grill in useable shape for longer!
If you need a new grill, check out this website:
grillpartssearch.com/mm/mercha...

Опубликовано:

 

6 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 6   
@johnherald1903
@johnherald1903 6 лет назад
Thanks for the advice. Master Forge Tip: DON'T BUY ONE!
@lorik1755
@lorik1755 5 лет назад
Just but some large cookie sheets at walmart..viola done.
@darinsmith9468
@darinsmith9468 7 лет назад
I have the Kenmore version of this grill. I just ran across a 3rd party part that might be just the trick here: www.clagrills.com/partsphotopages/CLA-DS0220.htm Looks better-designed than the original--which I call the Flame-Maker...
@brianmoody906
@brianmoody906 7 лет назад
Darin Smith did you try the 3rd party one?
@darinsmith9468
@darinsmith9468 7 лет назад
Yes I did. It was not an exact fit--I had to drill 2 holes to make it work; but it was close enough and was a big improvement to the grill. I also ordered new rails from the same place. These didn't fit the Kenmore properly either--it seems the same manufacturer for the Kenmore and Master Forge, but a couple of dimensions were changed on the Kenmore. A little work with a Dremel and a hacksaw fixed that & I was able to utilize the new front and back rails to beef up my otherwise rusted out grill with some new stainless parts. I added stainless drip rails and new burner tubes. Calibrated it all up and replaced my old grates with a set of grillgrates (grillgrates.com) and my grill is now better than it was when it was new. Other mod I made early on with this grill was using the Master Forge kit to convert it to natural gas--since I have a line plumbed. Now, I'm going to cover all the possible rodent entrances with 1/4" hardware screen, since we have lots of rodents around and I don't like them getting into my grill.
Далее
Впервые дал другу машину…
00:57
Me: Don't cross there's cars coming
00:16
Просмотров 11 млн
你们会选择哪一辆呢#short #angel #clown
00:20
Blackstone Griddle | Grease Drain Problem Solved?
6:12
The perfect grease catcher | BBQ Tips
1:23
Просмотров 11 тыс.
Char Broil Replacement parts- Burners and Diffusers
16:41
Впервые дал другу машину…
00:57