Shadow Systems CR920 vs Glock 43X | BEST CCW GUN 

Dude! Most quality gun channel I’ve found in awhile. Cant believe you’re not bigger!

just found your channel bro im loving it your a great reviewer i quality content hard to find these days you definitely deserve 100k subs bro you be there soon just watch

With my wife having a Glock 42 and previously having a 43, 43x and 43x MOS (not all at the same time) the biggest offender with Glock’s trigger is that they use a full size (like from a 19) striker spring. There’s only so much room in there so when you pull the trigger it gets to a point where it can’t really compress the spring much more before the trigger breaks, thus making it very heavy. I changed the striker springs to shorter ones and man what an improvement. Might be worth popping the striker plate off and seeing what’s in there. If it’s a Glock spring and not proprietary, put a shorter on in from Wolf.

For the mag release on the 43X with the S15 mags, wrap the mags in 2 layers of blue painters tape, put the mag in the gun, and take a blow dryer on hot for about 5 minutes, then take the tape off and the mags will drop easily

I have both the CR920 and the 43x. I love the fact that the CR920 is basically a 43 with metal mags. Being able to put the small mag in and have 11 rounds in an extremely tiny and comfortable pistol is amazing. Even with the extended mag it prints less than a 43x. I don't like the trigger at all. It has too much squishiness after the wall, but after a couple of mags and a lot of dry firing I am still extremely accurate with the pistol. I can shoot a head sized piece of steel at 50 yards with irons even with the shit trigger. I also like that I can put in 43x mags and they work as well, since I have a bunch. The PSA micro dagger 15rd mags also fit in the cr920, a little weirdly but I have shot it and they do work. For some reason the s15 mag did not work in the cr920, mine at least. As for the 43x, it has become my designated truck gun. I bought the s15 5rd extension which means that whenever I'm in my truck I have 21 rounds in my 43x. 43x is overall a great pistol. Also the slides are completely interchangeable which is nice. When I carry I carry the cr920 with the flush mag and normally either the 13rd mag or the PSA 15rd mag. But overall the cr920 having 11 rounds in an incredibly small format that even I can wear (6" 155lbs) without printing is amazing. I forget I'm even wearing it sometimes it can be so comfortable.

When I first got my DR920 the trigger felt gritty. I am past the break in period and although it isn't any lighter or shorter, it feels much better and smoother. If you haven't gotten to that point yet, you probably will with more rounds through it. When I first got the gun I thought I wanted a new trigger but I am fine with it now.

I’ve had both. I currently have a 920P that I have chosen for my “slim” edc. The reason I went with it over Glock 43 or 43x is that I don’t have comfort issues concealing a Glock 19, I do print wearing a t shirt. With the 920p I don’t print at all. The 43x grip is basically a 19 length so it’s still printing on the last bit of the grip. I love Glock but sticking with plastic mags on their slim lines really gave everyone else a leg up and Glock still sold TONS of their slim guns. Both are pretty good and the p920p trigger that I ended up with isn’t that bad. It definitely is a step down from Walther but it’s still good enough. Best thing I can say is that these days there’s way more good guns than bad. It wasn’t always that way.

Bought a MR920 new. Was aware that they suggested 250 rd breakin. From round 1 - 500 to this point no stoppages at all. Trigger is really good.

Awesome. I just back from visiting the DMZ. Thanks bro. Just bought the CR920P …

I've only changed out sights on any of my guns (i.e., Glocks stock plastic to night sights). If you're into competition, customize your gun until you're happy with it. For a carry gun for self defense, I'd leave it stock except for sight (or optic). My thinking is any modifications will give a prosecutor or an attorney of the person you defended yourself against fuel that you're looking for a fight. I would venture to say many lawyers and potential jurists are not gun knowledgeable; so modifications have a negative impression if you find yourself in that situation of legally having to defend yourself in court (whether criminally or civilly). That goes for color schemes, or "Punisher" type engravings on your back plate, slide, mag base plate, holster, etc. Just my 2 cents.

Great video. I rock the 43x non mos. I went for non mos for the smooth lines. I then tried to edc my mr920 elite. Have gone back to the 43x. I too am a small boi, and i think the 43x is perfect. Not a fan of the red dots especially on edc. Only mods on the 43x are talon grips (used them for years with o complaints) and ameriglo idots. I absolutely love that little thing!

Swapped my cr trigger with a oem np3'd trigger bar, oem np3 trigger plunger, and minus connector all from overwatch precision and picked up a ranger proof vex f3 shoe. made a HUGE difference.

A faster better trigger , can make the difference on whether you go home at night (as the victor ir victim). The only trigger I refuse to upgrade is the G43 6 rd gun. Awesome factory OEM Glock triggers.

That’s a great review! As an Asian myself finally found some Asian reviewer that I can relate to. Keep it up! If you are in Colorado, let’s go shoot!

Which one a bigger grip?

Nice preview and presentation. It seems like youreore towards the Glock over the Shadow Sytems. Looking from outside in it appears that Shadow systems is the new kids with issues warranty is good or bad from the comments. I would say over the Glock is better with a few mods youre good to keep youre reliability. Shadow Systems may look great with a lots of features, but may run into issues like with SIGs beat testing on the consumer as well as over hyping the marketing. The hest one is the one that meets your needs.

That bear logo hat what brand is that? I love it

😂😂😂my man's said if you're a small boi like me😂😂😂😂😂 you got my sub brother keep it up😂😂😂😂

Got my first handgun yesterday went with the MR920 Elite hopefully it holds up. Minnesota repppin💯

I’ve sort of adopted the following rule: if you buy a Glock, leave it stick. Any other Glock clone, go ahead and mess with it. Not being able to eject mags from the 43x, the wobbly mag well, I wouldn’t trust that configuration to carry. My carry has to primarily function, secondarily, shoot nicely.

Best CCW is whatever you can afford and use more proficiently... Any firearm will work for its intended purpose. I have both, and I switch between the two but I prefer the SS CR but that's just me...

I have the ultimate CR920 with a pmm comp and Johnny Glock trigger but the cr920 is better because of the coating and the red dot slide cut stays zeroed if you use the shims.

I know you posted this a long while ago..im curious ....cause my CR920 smoothed out alot with useage around 800 rounds now. Its become a roll through kind of trigger (still all stock). I've tried my friend's brand new 43x and it has a more glass break type of trigger. Im wondering if yours has done the same and which type of trigger you prefer.

After your 200 round break in period-and after more rounds through it than that-the 920 will become less gritty.The trigger will be better,and if that doesn’t do it,a Ghost connector will solve it.

I love my CR920, but I did put a JG Trigger in it (it's good, but still not as good as a JG on a 43X for some reason--of course, for the price, you can just put in an Agency or Overwatch trigger and a fitted Ghost connector for like 40% of the cost, and get 80% of the benefit). I also have a 43X, but the CR920 just points more naturally for me, and seems to shoot softer--I assume it's that the thicker grip has more surface area to absorb the recoil. I carry the CR920 with an EPS Carry (and sometimes an LCP MAX ELITE with mcarbo springs and galloway trigger), but the 43X is more for HD. NOTE: I got my CR920 (same as yours for $619+20 shipping+15 FFL = $664) and my 43X MOS ($434). But I've spent a lot to fix them up.

Got mine on sale @ Palmetto State Armory $499 without barrel view slide cuts.

They don't put it under the trigger guard because it will irritate/rub your index finger on your support hand, and the middle finger of your shooting hand. Really counter intuitive to have an undercut on a polymer frame pistol just to add stippling in the same place. You avoid the "Glock Knuckle" with the undercut, but then you rub the shit out of your fingers from the grippy texture. FYI great video. Just found your channel.

Broo Minnesota? Hell yeah brother easy sub

I think that this was a bit of an unfair comparison, as the Glock had 1000 rounds through it, and the Shadow Systems was still in its break in period (I'm assuming). Perhaps the Shadow Systems may have handled differently if it had more rounds through it at the time of the review. Just my $0.02. I do; however, like that you mentioned that modifying a gun takes you further away from reliability, which is very true. Your point on needing to mod a gun straight away vs having a decent gun out of the box was spot on. Nice job.

Glock is #1. Why people buy one gun, then sell it for another is silly thee days. Buy guns and collect them. Never sell your guns. Soon, you won’t be able to get guns as easy as the old days.

Man i just got a cr920 and i thought something was wrong my with trigger. I will say though the plunger has a bur and the finish is peeling off the plunger as well. Nothing beets my canik triggers. Love my hellcat too.

Changing OEM triggers can get you in legal trouble if used in a self defense situation.

Cr920 frame with arc division slide enough said

My dr920 trigger is Better than a stock Glock but nothing amazing. Upgraded it to Timney competition trigger. Cr920 stock trigger is ass. Can live with it but very underwhelming.

Damn man. I feel the same way about the trigger but for me it’s on the 43x. The trigger is way to stiff to the point I keep bracing and dipping down anticipating the shot.

Ready for the cr920x? I want it, might sell my cr920

I like both my cr920 and 43x

So the glock was done up to basically the same build as the factory SS.. and the SS is a glock "clone".. yeah I'd just go with the Cr so you don't have to stipple, undercut, and change sights. Ez choice unless you seriously just want the glock

Glock 15 rounds flush fit mags

but this isn't the P model how come?

Love the ss have a ss and canik but i think the canik mete mc9 is up there with the ss

Your Katana doesn't sit well because of the stippling. you can't even have a grip under. it needs to be flat. then your Katana will be perfect and your S15 eject much faster.

The shadow systems smokes the 43 hands down!!!

Imo stock Glock. The Shadow Systems out of the box is not that good

The Shadow Systems is the gun Glock wishes it was....

Shadow system is garbage company won’t stand behind its pistols

🎉🎉🎉🎉❤❤❤🧢🧤🙈🙉🙊🦢🦩. I was wondering if you ever shot a P-365 and if it was better with your hand size.?????? That’s the direction I went. Competed with 92fs and Glock 19. But now p365 xl and x. Pocketing the Glock 42 with underwood 380 +p extreme defense.