Should You REALLY Use Muffler Tape On Your Car's Exhaust?

Подписаться 161 тыс.

Просмотров 280 тыс.

50% 1

Today I answer the question, should you really use muffler tape on your car's exhaust? The products that I used were Fiberfix tape and JB Weld high heat putty. The exhaust on this car was completely rusted in half and the seams on the muffler were completely split. The Fiberfix tape did hold the broken pipe together but I noticed very little difference with the JB Weld. I considered purchasing more Fiberfix and JB Weld to get better results but, after pricing out the exhaust system for the car, I didn't make sense to continue "repairing" the original exhaust system.
Links to the products in this video:
Fiberfix: amzn.to/3ntxZki
JB Weld High Heat:amzn.to/3lsR4Bm
My Amazon Store: www.amazon.com/shop/repairgeek
Help support the channel, buy using my Amazon links
As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.
Questions? Shoot me an email at repairgeek365@gmail.com
Disclaimer:
The information, demonstration and any content contained in this video is for informational purposes only. The user Repair Geek makes no warranty, express or implied, regarding the effectiveness or safety of the contents of this video. In no way should the contents of the video, including the tools used, be repeated or tried by anyone. Viewers should only seek the help of a trained professional located at a licensed auto repair shop for any fix, modification, alteration, or any change to their vehicle. Repair Geek shall not be liable for any injury, damage, or loss to any person or property that may result from use of the tools, equipment, or any content contained in this video. In addition, there is no way to guarantee that the video is not altered or modified or is not in the final form submitted by Repair Geek and therefore, Repair Geek does not warrant that the video is unaltered or not modified. The links on this video to products are for informational purposes only and in no way are an endorsement of the safety or effectiveness of the particular product. Viewers understand that anything contained in this video or linked to or from this video is the sole responsibility of the viewer and in no way provides an express or implied warranty as to the safety or effectiveness of any linked tool, product, or video. Therefore, viewer agrees to release, waive, and discharge Repair Geek or anyone affiliated with Repair Geek, from any and all liability, claims, demands, actions, and causes of action whatsoever arising out of or related to any loss, damage, or injury, including death, that may be sustained by the viewer, or to any property belonging to viewer, regardless of whether the loss is linked to the use of the contents of this video, or otherwise and regardless of whether such liability arises in tort, contract, strict liability, or otherwise, to the fullest extent allowed by law.

Авто/Мото

Опубликовано:

11 окт 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 280

@RepairGeek 3 года назад

Have you guy ever had any success using this type of stuff? Links to the products in this video: Fiberfix: amzn.to/3ntxZki JB Weld High Heat:amzn.to/3lsR4Bm My Amazon Store: www.amazon.com/shop/repairgeek Help support the channel, buy using my Amazon links As an Amazon Associate I earn from qualifying purchases and your cost is exactly the same.

@shadow212121kb 3 года назад

Great video! HELP! I have a 1997 Mercury Cougar with PI Swapped polished and ported headers. I used the Mustang GT Shorty headers on my Cougar but the EGR Tube had to be relocated to drivers side exhaust manifold. My problem is that the EGR Tube is cracked by the flange. Can't seem to remove the nut. I was thinking of using the JB Weld High Heat paste and a shop vac hooked up to the exhaust to aid pulling the high heat paste through the crack in the flange. Do you recommend this? My last resort before using the High Heat paste is to use an impact chissel to try and knock the nut loose. It was changed in 2011 when I did the swap. I can get a 1-1/8" wrench on it but theres no room to actually turn the wrench.

@dalefresco8969 3 года назад

I wonder if it’s possible to reuse the fiberfix if it doesn’t set the way you want it too

@dynamo4543 2 года назад

depends you have to sand the rust off & it has to be clean

@Bramon83 Год назад

Not this product specifically but yes, not in a high temp environment but it's still holding up 7 years later.

@Chef1Mat 7 месяцев назад

yes. good success. i even used a soup tin can and clamped it. it worked for few years

@dar4431 2 года назад

You think thats a mess, you should see my "y" pipe. It's in 7 pieces all held together with beer cans, clamps, duct tape, muffler tape, hose clamps, foil tape and stuff I don't even want to mention

@shiloh4184 Год назад

does it still work?

@shiloh4184 Год назад

seems a good hack is far cheaper than a shop bill

@That_Blue_WJ Год назад

Makes me feel good about mine.

@shiloh4184 Год назад

@@That_Blue_WJ long live common sense and clever hacks!

@That_Blue_WJ Год назад

I wasnt hating. Lol. Mine looks like trash itself😂 ive got 3 different pipes clamped into smaller ones about every 2 inches apart😂😂😂

@angelaowens7460 10 месяцев назад

I appreciate your honesty and your attitude! You spoke clearly, the volume was good and the video was clear with good lighting!

@vapoureyes Год назад

A good honest report , much appreciated.

@bobbywashington1975 4 месяца назад

That one liner about the exhaust writing checks was awesome! We cracked up. Nice video.

@wiliiamamey5967 2 года назад

I like this video because of the honesty of it. I'm in a predicament right now where I want to do a quick fix on an exhaust. Usually quick fixes don't work that well. Haven't done one in many years but I remember back when I was young these types of products did not work all that well. I watched the video because I wanted to see if the technology has improved. It's good that we have Internet videos to see how it goes for other people before we go and waste our own time trying these products. It seems as though he didn't wait for the product to cure before revving the engine. I do really appreciate the honesty and realistic nature of this video. At the end it does give some good advice.

@dusan.racicky Год назад

I'll also give you good advice to buy a new exhaust. This is a waste of money, time and nerves if it falls off somewhere along the way.

@tonynguyen5750 2 года назад

I like your videos you get straight to the point, keep it going and you had a new subscriber

@Pbs-xs4xk 3 года назад

Great vid, very professional editing! Subbed Sir

@whocares4464 2 года назад

I've used that JB weld product before repairing a cracked metal radiator and it worked great. Couldn't believe it but it did. It was the top part of the radiator though. That product is good for some things. A friend repaired a hole in the bottom of his 2000 Silverado fuel tank and has held up for months

@MrBradshawbenjamin Год назад

I'm wondering if I bought your car because mine has JB weld in the same place you're describing, although obviously I highly doubt it lol. Not an old Toyota, right?

@tigergreg8 Год назад

@@MrBradshawbenjamin If it is his car, I doubt he'd want to admit it, because anyone would feel the new owner will blast them with all kinds of crap about the vehicle. LOL

@dannnmerkle7930 Год назад

I did the same thing to fix my radiator a while ago and I was also amazed how easy and cheap a fix it was until a year later it blew again on the freeway and roasted my engine before I noticed/had time to pull in somewhere. It was an older KIA with over 260k on it so not a huge loss but really shoulda just dropped a new radiator in in hindsight. Or at least realized it was a temp fix.

@nannymcphee8946 3 года назад

Love your honesty thank you

@MCFIXIT 3 года назад

Thanks so much for this informative video. I had no idea!

@CruisinCaprice Месяц назад

JB weld exhaust repair is the only thing that works besides a welder

@ricardonarvaez1628 Год назад

Hey, I love that you brought up "hey guys", lol. Excellent video, thanks.

@RobertoSantiagoRodriguez 7 месяцев назад

Tx so much, great video! Liked and subscribed

@joannecurtis6139 3 года назад

Interesting experiment

@yiwantao9622 Год назад

Thank you so much!

@Iwijauhvblolknappogy 3 года назад

Thanks for the info. No need to mention Chris Fox though

@pcno2832 2 года назад

Whatever your feelings about this stuff, it seems to do the job for which it's intended, though it's not exactly as "strong as steel", except when comparing it to very cheap steel. I would have added an intermediate section and more clamps, but what you did worked for as long as one would expect. I suspect it took a lot longer, even for you, to replace the whole pipe than it would have to put two bandages (or 3 or 4, or 5) on the existing pipe, so it's not an even comparison; for those of us without a lift or a welder, the time difference would be even greater. So, if you are dealing with a car that is already on its last legs, or leak in a system that is already due to be replaced at a later date (say, if you expect the catalytic converter to fail before the next inspection), this tape could buy enough time to make a big difference. In any case, the cost of the tape is trivial; it's more a question of what will make the car drive-able without throwing a lot of time and money into something that will soon end up in the junkyard. PS: I'm now selling a 172,000 mile car with an exhaust leak and any real repairs would have no hope paying for themselves, so I'll patch it up and tell the buyer that it has been patched. He can decide when, or whether, it's worth it to "do it right" after he's lived with the car for a while.

@michaelthomason4545 2 года назад

Jkkk mmkkmmmmm I'm

@michaelthomason4545 2 года назад

Jkkk mmkkmmmmm I'm

@dusan.racicky Год назад

How can you tell someone that it's fixed. It's like if you put a band-aid on someone's wound that needs to be sewn up and say that it's fine. Anyway, it's called fraud.

@user-ts4yf3fe9u Месяц назад

@@dusan.racicky It is not fraud if the fact is disclosed. As longer as buyer is given all the information he can decide for himself if he want to buy.

@JungBokLee Год назад

thanks ....I refer it for my exhaust...

@samking4179 2 года назад

great video. it's called "putting good money after bad."

@morganlittle8404 2 года назад

Scotty has talked about this type of product before... I've used it as a temporary solution while I wait for my walker exhaust system

@georgeparker555 2 года назад

I kind of disagree with "just replace the rest of the pipe". First of all some parts of the exhaust system are very expensive and I know toyotas pretty much have one consecutive piece of exhaust that runs down most of the car with the catalytic converters attached so I would much rather try to patch the exhaust leak than buy a whole new exhaust. Also sometimes exhaust work is much harder In places that salt those bolts usually won't come out and you end up having to cut the exhaust and becomes a whole process meanwhile you could've patched the leak and could last a long time while saving time.

@j.67 2 года назад

Living in an apartment, with no home garage to work on things, I used muffler tape + a spliced aluminum can + wire to cob together a temporary fix. Likely saved me from a ticket until I could take it to my friend's garage and fix it proper.

@MOEZANDERS 3 года назад

Hilarious ... This is awesome ... Perfect example of an emergency hardwire fix ... Done on purpose ... Great job ...

@kylerodd2342 Год назад

I’ve spent $50 the last two years patching the exhaust on my shit car. Saved me over $500 that I’d have to spend on a new exhaust. 10% of the cost to get 2 years of driving out of the 4 years I’ve had it. Patching can be useful.

@kusha3999 Год назад

I was blind in one eye and the heat wrap helped cure it

@justinlalko7834 2 года назад

I used something similar from autozone then took a band clamp and clamped it tight. Only half the radius of the pipe is cracked and I no if not the truck for 1500 2 years ago and this is my first repair so I’m not worried

@galactic904 Год назад

Your advice is very good. More than likely the pipe will rust out in a different location. One quick look online for a Buick Century exhaust pipe (from the cat ) with mufler included, $200 canadian. Not bad

@miketabar2327 3 года назад

In all fairness this product never claimed to make the whole pipe "like new". If you use this stuff you should know that it is nothing more than a band aid that may hold until suitable repair can be made. In the case of Fixx's repair because of the location and pipe condition I would expect to get a long life of that repair. Great video.

@mostlymoparih5682 7 месяцев назад

If you're concerned about the tape holding then you should have used an old soup can. With both ends of the can removed you cut down the side of the can so you can wrap it around the pipe and put a clamp on it to hold it. I have used soup and soda cans to repair a few things on my cars. I used a soda can to repair the sway bar bracket on my Camry. Good video. Happy Motoring.

@g..._anthony27 2 месяца назад

yeah right

@11co5955 Год назад

In an ideal situation, the stuff works, especially if you are just trying to buy an extra year before replacing

@jlousy1901 3 года назад

In Toronto Canada, drive an 04 Matrix for all four seasons, automated car washes, snow and road salt... 1 yr later and still going strong. I only got car ramps and jack stands. I figured an almost 20 year old car with a new pipe ranging in price from $150 - $200 plus labour... If I do the heat wrap 15 more years I'd still come out on top. Still going strong

@richardevans3707 2 года назад

Have Honda 2002 crv 320,000 miles runs great.. last night someone tried to cut out catalytic Convertor.. however the convertor is bolted to frame. they gave up now have cut tail pipe. Think I'll give the wrap a try. Did that long time ago to Ford Pinto Muffler.. Worked Great lasted Years.

@wadeyorke8144 3 года назад

Good video. Your car could use some oil type undercoating since it's starting to rust. Not sure if you live in an area that applies road salt in the winter. I saw your great video on undercoating materials and although I have applied Krown, Rust Check, and the Dominion Seal No-Drip in the past, I just tried the canola oil. Bought 16 litres at Costco for $22 (Canadian) and applied it liberally with a Titan paint sprayer. It applied well and was easy to blast into frame drain holes. The car dripped for 2 or 3 days and I guess time will tell how well it stays on.

@reccocon3442 Год назад

Why canola oil ?

@galactic904 Год назад

LoL!

@antoniochaides788 Год назад

Have you tried to wd40 it

@willtoulan Год назад

@@reccocon3442 environmentally friendly

@tigergreg8 Год назад

@@reccocon3442 I figured it was just a joke. I'd never do that. Lmao

@chriscannoles7319 3 года назад

With fast hands like that I wouldn't need a girlfriend ha ha ha a lmao 🤣

@bchu2186 2 года назад

😐

@JTB128650 2 года назад

Clever

@YungEBT 2 года назад

Pause? ⏸

@ecf6760 Год назад

Sus

@HonorRollFilmz Месяц назад

@@YungEBT lmao

@Tyler-hs9eu 2 года назад

I had a section of connecting pipe before the muffler rot out that looked like it was connected together with a joint? (Not sure what to call it). I went through a long and painful process of cutting that section out and replaced with a flex pipe. Watched many different videos showing different fixes. Eventually went with wrapping the pipe with the red muffler tape on one end and a jb weld wrap on the other end then secured with clamps. Seems to have done the job but only time will tell

@mattwanoa3919 2 года назад

So if the rest of my pipe is good, the wrap will work? Because my pipe has no rust only a small leak which im planning to use wrap for

@JustAnOldMan 3 года назад

I'm going to try it on my Chevy 2500 HD, the leak is in the pipe with a build in catalectic converter, and believe it or not, that lousy 3' pipe is over a grand, BLOODY NUTS

@googleuser868 2 года назад

Got a couple small holes in my exhaust pipe from a welded on hanger pulling loose. Gonna try the putty in the holes and clamp the pipe back to the hanger. The rest of the pipe is still solid so this might last thousands of miles.

@spiridondimaris465 3 года назад

Thats what i call good jop geek

@Dankdalorde 8 часов назад

Ooooof wish I saw this after wasting my money on this. Just needed a temp fix but it’s hard to connect a completely cut off flex pipe to the CAT converter

@7Westwood 3 года назад

My experience with that heat wrap stuff was that I would have been better off using an ace bandage and saving the $12. Mine got about as hard as a wet noodle. Very un-impressed.

@prezaricardo1749 3 года назад

Good video, probably little to late for my wallet, I just got it last week trying repair muffler pipe, but its okay to learn and start reading all the information about products ..

@AdnanKhan-lu9yh 2 года назад

how do we fix a broken muffler with a missing stub to wrap the tape on?

@Merman0311 2 года назад

beautiful new edge tho😍

@Brian81-207 Год назад

How much heat do you think it can really take I used the high heat jb putty on leaf blower muffler and it melted like gum after 5 minutes

@YT-User1013 Год назад

I can weld (stick, MIG, TIG), but never welded exhaust. How do you weld such rusted pipe and how do you get a bead on the top area of the pipe?

@dylano7242 2 года назад

Would this work on a jetta diesel plastic turbo pipe, or does it only work on metal exhaust pipe ? Have a hole in the plastic pipe that leads out from the turbo, causing under boost loss of power.

@joejoejoejoejoejoej Год назад

Great video Informative and clear You’re lucky to have connection points in your system My 2007 Rav 4 has no connection points near Cat therefore difficult to install a new muffler 😞❤️

@RepairGeek Год назад

Pipe stretcher and some muffler clamps can fix that problem.

@plaid11 2 года назад

I’m going to have to try it now, got under my car to take a look at my wobbly exhaust system and I have a good sized rust hole. The rest of the the pipe has basically no rust so I don’t want to replace the whole thing. In the next few days I’ll try it

@markm0000 2 года назад

Is it holding up?

@jdmfanatic0262 Год назад

How’d it go ?

@angelaowens7460 10 месяцев назад

Did it work?

@MarioCyr Год назад

how long did it last?

@yronkeith9807 2 года назад

Funny, I have the exact same problem on my Fit. Where do you get the exhaust pipe? Only ones I can find are Spoon lol

@briangregory6303 2 года назад

Dammit, I need a car lift.

@hencevigoro9912 2 месяца назад

Yes You right it's depends the pipe How old is???

@neilsnow7973 Год назад

that heat wrap looks way different then what was put on my manifold (header wrap) also known as heat wrap. And it wasn't for a hole, it was put on for other reasons, it looked and feels like fabric and stretches around the pipe like what you put on your body for a sprain or to cover wounds. It gave the 4runner a little better gas mileage plus helps with heat. Wasn't my idea, I had never heard of it before. My garage guy put in on. The 4runner was built for off road use and on road. Changed out the crap auto transmission for a 5 speed but kept the automatic axles which are geared different, (I think Toyota used 3 or so different ratios between 88 and 94?) The transmission was from an 89 pickup, the axles are original on the 94 4runner. Let's just say, 4-low is now more like 4-super low! Lots of torque not a lot of top end. Great gas milage. Also replaced the 3.0 for a newer 3.4 out of a 98 4runner limited rollover that I got for cheap. Sold the leather electric seats and that paid for the rollover, the rest I parted out as profit. They really shouldn't call what you got heat wrap, because there are heat wraps that are used in race cars and off road vehicles that increase performance. That stuff you got is more like repair wrap that is heat cured. Kinda different I think?

@LaffyGaffy69 2 месяца назад

What about JB weld steel stick? Or JB weld high heat putty? I've heard good things about them

@skyhunter1981 2 месяца назад

Stuff does work just not easy wrapping it .

@cameroncashatt692 10 месяцев назад

I got an old x485 mower with a couple small holes. That blows the exhaust right on the engine so this may be useful for me.

@RepairGeek 10 месяцев назад

Buy a used muffler from another mower.

@buck43201 3 года назад

Second comment, I learn so much watching your car repairs. Keep up the great video's.

@spiridondimaris465 3 года назад

Geek long time no see good jop

@craigbratty5453 Год назад

No point even trying to wrap that pipe unless your sticking to the guidelines on the packaging. I've used it before with the right measurements and it works brilliant and when dried it has an almost solid hard texture to it so should last a good while.

@robertmaurer4229 Год назад

The tape does work I used furnace cement to repair a crack/hole but remember it's only a temporary fix this will be u some time to get it fixed properly u were right in saying what the shape of the exhaust is in b 4 u try something like this

@-PURPLE-HEAD 3 года назад

I just tried this and drove around for a few minutes and the tape completely dissolved.

@frankenstein70 7 месяцев назад

I use JB WELD. Plus a can. cut length wise. put the can around the broken pipe and use metal clamps. Cause muffler shops charge too much.

@L8nitedave 7 месяцев назад

So on my 91 Volvo Wagon with most of the exhaust already replaced and a downpipe and cat very difficult to get this could work to buy time to get the parts I need to fix it right.

@hippiecowgirl4231 2 года назад

I tried this on a hole in the bend of my exhaust . It lasted a day and a half before blowing out

@CUSTOMWORKS7.3PSD Год назад

I'm going to guess it will not hold over time at the muffler/res its not getting enough area to hold onto

@al-mubdizahir8704 3 месяца назад

Dam right. We goin heat wrap everything

@ericjudd3137 3 года назад

Like the chriz fix thing he makes it look so to easy we all no its not

@DickGazInYa Год назад

100% agreed. I've cheap'd out on a number of things from tires, to suspension components, sensors etc and it...never... works. Every time I think "I saved all kind of money and the problem is solved", it always comes back and now it costs even more to do it correct the second time. It sucks, but spending the extra money doing it right in the first place is the only way to go.

@chrissanchez9218 Год назад

Used it in your daily car I’m assuming

@andymoore1813 11 месяцев назад

Always buy the cheapest of everything and it works fine

@Jay-cp9kd 9 месяцев назад

Depends…. If you have a hole/ding from hitting something in the road, and it’s on a clean section of pipe, these products can work great. For about 10 bucks, My buddy used that red brand tape…. Wrapped a piece of foil cooking pan around it on top with 2 hose clamps. Its still super quiet 5 years later. And it actually looks kinda professional ha

@susanneguzman5339 2 года назад

The picture on your package looked like it didn’t instruct you to unwrap the tape but to just soak it in water?

@hydroman99 3 года назад

Un related to thid video. I hope you do another fluid film installment on the Colorado. The FF series brought me to your channel.

@RepairGeek 3 года назад

Yes sir. Shot some footage today. The video should be out in the next week or 2. Thanks for watching.

@kevinagnew6878 2 года назад

Prep the area well with a wire brush and then spray it with brake parts cleaner and apply quickly idle for 10 minutes and then you will have a chance of a couple of days or more until you have to get it properly fixed by welding the new system 😀 👍 😉

@mrrolltideroll2018 Год назад

I have tried using the heat rap absolutely junk. It starts burning up immediately and within a few days. Your back where you start from repairing the exhaust .

@pumpupjam9648 8 дней назад

I guess he didn't watch Scotty K., talk about this a few years ago. Scotty, had the same package, he cleaned off the pipe using a metal brush and used a pot of water, and then he wet it again, squeezed the extra water out of it, wrapped the tape around the pipe with a big hole, and after it was on he put the silver tape over it. It works!

@RepairGeek 3 дня назад

I DON'T watch Scotty and I'm smarter for it.

@joesmith6524 2 года назад

should have used the JB on the first fix!

@brodyheikkila8327 3 года назад

Damn I do not think I can fix my brilliant exhaust job I did on my car

@mpasaa Год назад

I think the point of these is to buy time before replacing the entire exhaust system. Not everyone is a welder or can do it themselves and will have to pony up more than a few bucks to most shops. Let's face it, you say $50 or whatever to replace the pipe but we all know any shop is going to mark up even these simple parts quite a bit plus labor...just saying. That said, based on your demo they seem to work in emergency or last resort type situations as a temp fix....anyone relying on tape and some goop to fix car parts of any kind is really hoping against hope at that point and probably just can't afford to pay for legit repairs.

@RepairGeek Год назад

A short length of exhaust tubing and some muffler clamps would have held up better for about the same money.

@cory2841 3 года назад

Jb weld is amazing , for this , who knows.

@jf3209 2 года назад

i like your garage hydraulic lifter and i want to buy one too. I wonder if you can introduce it a little, such as if it is hard to install into garage. how high the garage should be. Thanks.

@RepairGeek 2 года назад

First video I ever made: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9u-e3okXpsI.html

@JimLake.Junior 7 месяцев назад

I don’t know if welding would have been any better. Probably would have done the same as the tape. Put strain on another part of the tube and blew a leak there.

@user-ts4yf3fe9u Месяц назад

If you have the lift to replace the exhaust it is better, without labor cost replacing exhaust is not that expensive. Replacing the whole thing with the car on a jack stand it a bit more dicey. I would also need to replace both O2 sensors also, and those are not coming out.

@Stinkaru17 3 года назад

I let it sit for 2 hours too dry out in the heat weather we have today and after that drove it and my car is smoking from the tape idk??

@TheThreeLeggedChair 3 года назад

interesting..

@premierhitscorner 28 дней назад

Chris fix my guy please tread lightly😂😂😂❤

@Snowness 3 месяца назад

$1200 for a new exhaust online (or $1800 locally), or $150 to jerry rig a cheap muffler with a side exit and wrapped the flex pipe. Dodge caravan with 380,000km, worth about $4500 if i fixed it proper and sold it. (Canadian, so prices are still completely insane for literally everything up here) 😮‍💨

@gojomodu9934 Год назад

The VersaCHem HD exhaust bandage tape is way better. I used it on the end joint of a flex pipe. Its still going after a year

@no_handle_required 2 года назад

As cheap as mufflers are, would this really be worth the time to do vs just replacing it?

@classicalbunny Год назад

I guess it depends on the car. I have a 2002 Jeep Grand Cherokee (a rusted mess underneath) and today I took it to a Midas Mufflers in Pittsburgh because the pipe had rusted off. I told him I couldn’t spend on a new exhaust system and asked him to basically do what “Repair Geek” just did in this video. He took a look, said it was not possible, and the total cost of the minimum repair with tax was $802.54. I left. I have my own repair geek at home (my husband) but home is Chicago and I’m living with my bad choice of bringing this car on a visit to Pittsburgh. I just need to fix it well enough so it will last the 9 hours of freeway driving. I was going to try a different fix, though...I am going to try using a can and Versachem 82009 exhaust tape. It’s on sale at autozone for $5.49. I have a free can in my trash. I found some coarse sandpaper in the closet. My only fear is getting the completely rusted clamp off. I don’t think I can reuse it. I will try a coat hanger and a pair of pliers in lieu because I don’t have any tools with me. I wonder why a Jeep’s exhaust system is so much more than others.

@richardrichard4394 Год назад

Tried it on a cracked exhaust manifold the fumes will kill ya then replaced manifold

@spacefightertzz 3 года назад

Nice thanks. I heard a lot of jb weld but didn't know there was a extremeheat version of it. I think you used high heat but extremeheat is what I'm looking for. Just using it to connect copper fittings to my modded (not-so)-aluminum bottle muffler on my 49cc kick scooter. And I could use a better real-aluminum can because the alloy bottle I have is melting.

@Harold_Callahan 2 месяца назад

I think the fiber might be OK if the pipe is in general good condition. But as we saw here, your old pipe was failing overall everywhere. It's whack-a-mole to plug holes as new ones pop up.

@hydroman99 3 года назад

BTW, great Chrisfix impression.

@jimmy7144 Год назад

Someone crudely cut out both of my cats in my Subaru Forester and I N-Rigged it with bendable sections of replacement pile from autozone, 4 sticks of JB weld putty, 1 liquid copper tube, Dollar Store Turkey aluminum pan where I cut out layers and 2 and 2.5 inch hose clamps. Three metal hangers to suspend it where it was most needed.. So i started with JB putty and really pushed into the hole and into any crease around Use a flat head screw driver to pis he it deeper. Then put liquid copper all over the putty and past it to exceed the putty and wrap the aluminum around the copper and putty like a pig in a blanket. 3 hose clamps on each section, 1 clamp on the end and one in the middle and tighten. And hour later you are good to go

@JCJW101 Год назад

My Lexus exhaust costs $2000 and there's no cheap OEM replacements so I might use the tape.

@susanneguzman5339 2 года назад

Just wondered what happened to the substance you put on the muffler? Could you of put that mix on the pipe before putting the tape? I really think you had enough to do it all if you would of spread it out a bit more. Thanks for showing us. You didn’t give prices on the items bought so it’s hard to work out whether it would be financially feasible in our own situations?

@erache6667 Год назад

Did you notice he did give links to his amazon store where you could purchase the products he said were not all that great whilst making a nice profit? He also slammed his competition CHRIS FIX CHANNEL who puts out way better videos. Videos that show repairs using tools most of us already own which definitely does not include a hydraulic vehicle lift. Plus the CHRIS FIX CHANNEL does not ever profit off its viewership by endorsing NAME BRANDED products. Products that perform and do the job they were intended well. All whilst saying they are really not very good. I'm sure FIBER FIX and JB WELD would gladly use their stuff on this douche bags mouth to seal his yammering pie hole permanently. Then they should bend him over and take the money he made from slamming their products by jamming it straight up his wussie a-hole. Just Sayin'!!

@hippiecowgirl4231 2 года назад

If you blow into the gloves first they are much easier to put on