Siemens NX Tutorial | Interpart Expressions 

B2A-16 | Siemens NX 2007 Tutorial Assemblies | With Interpart Expressions, parameters of several parts can be controlled centrally. These central parameters can be contained in the main assembly or in a separate component.
In the first example, the individual parts of the cylinder are changed via central parameters.
The second example shows how the positions of parts can also be changed via central parameters. The selection from lists helps here.
If you want to participate actively: the assembly shown is available for download. You will find the link in the description.
▬about this channel▬▬▬▬▬▬▬
With LearnNX you will learn Siemens NX step-by-step from the beginning. The basic course consists of learning videos that build on each other. (marked blue)
You start here: • Siemens NX Tutorial | ...
In between you can check your knowledge with tests. (marked green)
Expert exercises impart special knowledge. (marked red)
All learning videos are available for free. We look forward to your comments on RU-vid. (and about your subscription ;-)
/ @learnnx
▬about our free learning platform▬▬
😃 All tutorials, clearly arranged, can be found here: learnnx.com
Learning videos with a short description, together with the exercise materials as download.
You can also search 🔎 for commands or topics.
And all according to the motto: step by step / for free / for all 🎈
▬Links▬▬▬▬▬▬▬▬▬▬▬▬▬
The download for the cylinder
learnnx.com/downloads
Tutorial Attributs
learnnx.com/course-assemblies...
▬chapter▬▬▬▬▬▬▬▬▬▬▬▬
00:00:00 Foreword
00:00:52 Problem analysis
00:01:49 Create components for variables
00:03:31 Create interpart expression
00:06:59 Connect sketches with the IPEs
00:08:45 Guide
00:09:47 Tube
00:11:26 Piston
00:13:39 Control positions with IPEs
00:15:37 Create lists
00:17:06 Read out lists
00:18:25 Link components
00:21:00 Control positions
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► visit us on learnnx.com
#learnNX #SiemensNXfreeCourse