No video :(

Silverado Headlight not working Diagnosis (High Beam works Low Beam does not work) | AnthonyJ350

Подписаться 118 тыс.

Просмотров 57 тыс.

50% 1

Are the headlights on your GMT-800 truck (Silverado, Sierra, Avalanche, Tahoe, Yukon, Suburban or Escalade) having issues with the low beams not working but the high beams still work? In this video we go over key areas for you to inspect to get your headlights operating properly again.
#Headlight #LowBeam #Silverado #Sierra #Tahoe
Subscribe for more automotive tips!: bit.ly/sub2anth...
Watch my most popular uploads!: bit.ly/anthonyJ...
Check out my Amazon storefront www.amazon.com...
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com...
E-Mail: info@gofasthavefun.ca
T-Shirt: teespring.com/...
Music available - www.jinglepunks... & www.epidemicsou...
Intro - "Heartbreaker'" - Gloria Tells
Outro - "I just can't change my Emotions" - Basixx
- "It's Gonna Be Alright" - Basixx
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavef...) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Silverado Headlight not working Diagnosis (High Beam works Low Beam does not work) | AnthonyJ350
• Silverado Headlight no...
ANTHONYJ350
/ anthonyj350

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@kfelix2934 3 месяца назад

This is probabkly one of the best videos I seen out on electric diagnostic. If I could give you 10 stars , I would.🌠🌠🌠🌠🌠🌠🌠🌠🌠🌠

@AnthonyJ350 3 месяца назад

Thanks so much. If you share the videos it helps out a ton actually.

@dalejaff5663 Год назад

My lights stopped working a couple days ago on my 2010 Silverado but my high beams worked so I pissed everyone off and could of got a ticket but I drove all the way to work with my brights on, luckily I work graveyard so I didn’t need lights in the morning, I watched your video and had my friend that works at Oreilly check my fuses and relay switch and they were all good, turns out both bulbs burned out at the same time, I was thinking of checking the bulbs first but it was said that the bulbs going out at the same time rarely happens, go figure.

@AnthonyJ350 Год назад

Did you buy a lottery ticket after?

@jimmyjaymonte9611 Год назад

Very thorough troubleshooting!! and nice wrap-up

@AnthonyJ350 Год назад

Thank you for watching!

@evansryand 10 месяцев назад

So I have a 2011 Yukon. My passenger side lights work fine. Driver side when low beams on its dim, when I turn high beams on they turn off completely. I’ve changed headlight switch, fuses, relay. Do you think it could be a grounding issue? They are aftermarket headlamps (before I bought it). Thanks.

@AnthonyJ350 10 месяцев назад

Definitely could be

@BudgetGillz 6 месяцев назад

2014 Silverado same issue! 😭lmk if you get it figured out

@stealthg35infiniti94 Год назад

Anthony those are very good tips. My personal experience installing aftermarket systems, I avoid crimp connectors under the hood when possible. Eventually they will fail due to corrosion. Solder your connections whenever possible.

@silentbravo Год назад

The heatshrink style butt connectors are pretty robust. Or the solder shrink type are kind of a best of both worlds connector.

@AnthonyJ350 Год назад

But doesn't every plug use a crimp as well? What about marine grade butt connectors? Also interestingly, in aircraft connections are crimped, over soldered.

@stealthg35infiniti94 Год назад

@@AnthonyJ350 Factory crimps normally are made of high quality metals and platings. Most aftermarket crimps are made from cheap metals that easily tarnish or corrode. Perhaps if you can find Military Grade/Professional Grade crimps and installed correctly in weather resistant envelopes, they would be a good connection. Open air crimps such as ground points are susceptible to corrosion especially in snow regions. Constant treatments of Fluid Film or NHOU are required to slow the process.

@AnthonyJ350 Год назад

@@stealthg35infiniti94 Deutsch and Weatherpack are used quite often in the aftermarket. I love soldered connections but it's susceptible to temperature changes like extreme cold.

@justindivinagracia6086 Месяц назад

Please help I have the reverse issue my low beams won’t turn off when I activate my high beams, I tried turning the high beams on and the both came on together

@AnthonyJ350 Месяц назад

Check the relays under the hood

@losmoore3358 Год назад

Wow u did well on your video and explanation. Definitely worth subscribing. I have problems with low beam headlight turning off and on alternating on my 2011 silverado. I changed out single wire harness, pigtails, fuses, relays , but nothing works. So I ordered a new headlights switch. Hopefully it will finally do the job. Thank u. U got me thinking on that ground and aftermarket parts.

@AnthonyJ350 Год назад

You're welcome!

@babyj1727 5 месяцев назад

Did you solve your issue? I'm experiencing the same thing on my 09 Silverado. If it's a new bulb, it'll work like it's stored to for a couple months then stop working. I'll have to hit the side of the light housing a few times to make it turn back on.

@babyj1727 5 месяцев назад

New bulb will work like it's supposed** to.

@walterkersting9922 9 месяцев назад

Starts at 30

@AnthonyJ350 9 месяцев назад

Thanks for the comment

@jewllake Год назад

do you have a link to that brush you put at the end of the drill to clean where the ground wire goes? Thanks!

@AnthonyJ350 Год назад

Here's the link in my store www.amazon.com/dp/B00QK94Y0M?tag=onamzgofastha-20&linkCode=ssc&creativeASIN=B00QK94Y0M&asc_item-id=amzn1.ideas.2BVN57CZNM7LF&ref_=aip_sf_list_spv_ofs_mixed_m_asin

@Fresh910h Год назад

I just bought all new 8k HID conversion kits cause my old ones went out 2 weeks ago. I’ve use my headlights for total of 48 hours. Now my drivers side low beam is working the passenger is showing light but not working. Both high beams are working great just like the drivers side. Idk if bulb is already bad. Cause it’s glowing & fans running. I need help! Cause with 2012 Chevy you almost have to take the whole front end apart just to put them in. HELP?

@AnthonyJ350 Год назад

Did you test voltage at the factory plug?

@losmoore3358 Год назад

I'm thinking of getting brighter headlight low beam side. What would u recommend? The stock low beam lights u can barely see them at night and especially when it rains.

@AnthonyJ350 Год назад

LED headlight bulbs is what I run.

@freakshow7460 10 месяцев назад

Hey so all my lights work except the left high beam. I bought another set thinking I fucked it up. But nope it still won’t turn on. I checked the fuses they’re good. Could it possible a wire ? What do I do

@AnthonyJ350 10 месяцев назад

Check the headlight relays. The high beam in might not be working

@freakshow7460 10 месяцев назад

@@AnthonyJ350 thanks bud I’ll do that

@chope8808 8 месяцев назад

Where did you get the instrument panel/gauge cluster done?

@AnthonyJ350 8 месяцев назад

Here's the video, the place I got it is in the description ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yD6NH6LLsf8.html

@losmoore3358 Год назад

On those fuses, would u put some dielectric grease on the prongs ?

@AnthonyJ350 Год назад

I don't, don't want dust sticking in there.

@ryllyduc1198 Год назад

Great video! Do you have a link or the name of the brand for the brush guard you have on the front?

@AnthonyJ350 Год назад

It's a GoRhino unit. Bought it from Fleetandsafety.com

@jasonnellis3566 Год назад

What wired did you use to do resistors on 2014 silverado 1500 5.3L z71 lt for hyper flash. Thnx

@AnthonyJ350 Год назад

The turn signal wire

@jasonnellis3566 Год назад

@AnthonyJ350 cool will that just do the front or front and back. Also do you recall the color. Thnx your awesome

@uncomplicatedi Год назад

my headlight connector had the wires break off. what kind of connector is that?

@AnthonyJ350 Год назад

Don't know the name

@uncomplicatedi Год назад

@@AnthonyJ350 H11. i figured it out by looking at the bulb

@silentbravo Год назад

Do you have any videos about LED bulbs backfeeding and creating dirty power that messes with radio antenna's? I'm kind of suspecting that with my truck, when using brakes radio reception gets worse, and I did swap my 3rd brake light bulbs with LED type. It's an 01 2500HD so very similar truck as yours.

@AnthonyJ350 Год назад

I would reground the stereo and 3rd Brake Light if you can and see if that helps

@silentbravo Год назад

@@AnthonyJ350 Ok thanks for ideas. Not sure why I didn't get a notification about your reply, I had to come back here and check.

@AnthonyJ350 Год назад

@@silentbravo That's weird, do you have notifications turned on?

@08c6vette 7 месяцев назад

09 Avalanche, hi and low beams worked fine last time it ran. Vehicle sat for 3-4 weeks, which it's done many times over the years without issue, go to start it today, dead battery. Jumped it and got it running but only the hi beams were working. Ran it for a couple hours to see if the battery would take a charge but no luck, as soon as I shut it off it was completely dead again, so obviously need a new battery but the low beams not working and the hi beams are is weird. Think a new battery will fix the low beam issue or did an issue with the low beams ruin the battery?

@AnthonyJ350 7 месяцев назад

Did you test the voltage of the battery with the vehicle off and running?

@08c6vette 7 месяцев назад

@@AnthonyJ350thanks for replying, took the battery down to NAPA and had it tested, it’s a goner, bought new battery and installed it. No luck with lights. Neither hi or low beams work in auto mode and hi beams work in manual mode but low beams don’t. Fuses for low beams are good and swapped relay out with something known to works relay and still no luck, bad switch?

@AnthonyJ350 7 месяцев назад

@@08c6vette Did you try fixing the ground like in the video?

@08c6vette 7 месяцев назад

Going to try changing the switch first, which feels a little sticky going from off to auto. Oddly enough the high beams are working in the auto mode now, where they were only working in the full on mode a few hours ago.

@AnthonyJ350 7 месяцев назад

@@08c6vette Dorman makes a good replacement switch.

@Prisonmike89 Год назад

My window and lock switch isn't working. Headlights ain't working LOL. Marker lights work and mirrors work. What a pain in the ass lol.

@AnthonyJ350 Год назад

Thanks for the comment!

@chrisn5079 Год назад

Try getting a torch/heat into the available area. Not going to happen. (For heat shrink butt connectors) Also, LED headlights on the Chevy 2015-2019 are a waste of money. Because of design of headlight assembly. Don't waste your time.

@AnthonyJ350 Год назад

I'm going to put LED headlights in a K2XX GM Truck for my next video.

@chrisn5079 Год назад

@AnthonyJ350 nice I have a 2015 3500hd (srw. 1 batt) I've been through more LED bulbs than I can count lol. (OK, obviously i can count higher but you get the point. been through at least 4. I think 5 actually. And even the LEDs still have that stupid "line" from the idiotic projector style GM put in)

@AnthonyJ350 Год назад

@@chrisn5079 Weird, I put LEDs in a newer Ram with projector headlight housings and it looked great after. I guess it depends on the vehicle manufacturer. We do the upgrade for law enforcement as well.

@AnthonyJ350 Год назад

@@chrisn5079 This is the Ram I upgraded ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-5ETrj9Qb5zM.html