Simple way to clean the Epson print-head nozzles with a damp cloth 

your printer was black you clean it soooo good that in the end your printer was white

Thank you! I was on the verge of buying a new printer - watched several solutions and none worked. Tried yours and then did one more nozzle clean and it cleared the blockage completely!

So simple and effective,obviously you won't find this solution in any manual. Thank you ❤❤❤

Thank you! Thank you! Thank you! I too was on the verge of buying a new printer as mine is about 8 years old. Once through using your cleaning method got back all but the top and bottom black lines in a nozzle check test, and running the cleaning cycle on my printer got the rest.

Thank you so much! I was considering buying a new printer since my printer is 8 years old and has terrible printing quality, but after doing this it's good enough to not replace it!

Out here saving lives! Thank you so much- just saved me a huge headache! ❤️❤️

Excellent job no word to describe you hats off your idea

This did the trick for my printer! Thank you!

Thank you for the subtitles 👍

This worked for me! Thank you 🙂

Well done, perfect explanation.

This method worked. My paper was plain in the beginning. Now it's printed with little bit of lines. I'll redo it.

I think its better to use a womans thin menstral pad , it absorbs all liquids immediately and is thin enough so you can slide it under the printer head no problem.

Genuis! Thanks!

I did try & work better. After cleaned - did Nozzle Check. See my Red p line back. But print on few Red color line . It did 60% whole Red lines. What should I do. Do more damp cloth cleaning

My printhead carriage is stuck all the way to the left. Printer reports paper jam. Epson Rx595. It has been stuck there for a couple of years. Do I have to disassemble? Is it worth it? I would like to use the scanner.

Hi - I work with an epson printer to print edible images at high volumes, every week there is a new issue. The current problem is it is printing codes and special characters on the paper, would a clogged print head cause this problem? What do you recommend doing?

Not sure if you can help me but I have purchased new cartridges and when printing black and coloured the printing is not dark enough. Thank you

Ciao! Ho provato entrambi i metodi ma la stampante continua a stampare a strisce ( talvolta orizzontali, talvolta verticali )...quale potrebbe essere il problema? Succede solo col nero...

(Epson XP-205) Ciao. Ho provato a pulire la testina di stama con acqua come hai suggerito ma al montaggio ho un Fatal Error e non si muove più il carrello. Devo acquistare la key per WicReset per riottenere il funzionamento normale? Grazie.

How to remove vertical mini lines on a printed image? They go down the whole sheet

Ciao! Forse potrei ricevere aiuto da te per la mia Epson P900. Ogni settimana stampo almeno un Controllo Ugelli, o alcune stampe Fine Art A4 su carta Hahnemühle Matte. Ieri ho eseguito un Controllo Ugelli, tutto è perfetto, tranne il LGY (grigio) che esce con solo poche righe. Lo ripeto e LGY è completamente vuoto. Ho sostituito la cartuccia LGY con una nuova (quella precedente era quasi vuota). Ho ripetuto la pulizia della testina e il controllo degli ugelli alternativamente 3 volte, nessun reale progresso, stampando solo 2 linee molto piccole. Ho spento la stampante e ho aspettato circa 18 ore, ho anche rimosso, smosso e reinstallato la cartuccia, senza risolvere il problema. Non è possibile eseguire una pulizia completa (Powwer Cleaning) perché la maggior parte delle cartucce d'inchiostro sono quasi esaurite. Qualsiasi suggerimento è molto gradito, spero di non doverlo inviare all'Assistenza, anche perbhè la Garanzia è scaduta da un mese😔 Grazie mille in anticipo! I miei saluti dalla Germania 😊

my epson l3210 dont move from right to put the cloth

is cartridge not recognized is one of the printer head failure cause!?

Tried that still not print black

You skipped over how to remove the cartridge holder, please show us!

Water will damage the printhead per manufacturer warning.

You shouldn’t move the print head by hand, your break it. There’s a red triangle on the front that moves it

You might want to use an alcoholic liquid