Тёмный
No video :(

Simple Way To Replace Your Engine Oil Pan Gasket | 2004-2008 F150 5.4L 3v 

Just King Adrian
Подписаться 3,4 тыс.
Просмотров 26 тыс.
50% 1

I had a pretty bad oil leak coming from the bottom of my engine. I suspected oil pan gasket so I ordered the parts and tackled the job. The job was pretty straight forward and took me about 3/4 hours total between two days.
Here are the parts I used:
Oil Pan Gasket Set amzn.to/3Y4Nv7H
Permatex Ultra Black Gasket Maker amzn.to/3kS2TGj
Motorcraft Oil Filter amzn.to/3DjyfvO
Tools:
12pcs Flex Head Ratcheting Wrenches amzn.to/3RblzwQ
SUBSCRIBE to stay up to date and support my channel!
Camera Equipment I use:
amzn.to/44G6Q2Y
04-08 F150 Parts:
amzn.to/3OwRND6
Universal Auto Parts:
amzn.to/3rQ9ynH
Tools/Garage:
amzn.to/3QeEnwS
EVERYTHING I USE FROM AMAZON:
www.amazon.com...
SOCIAL MEDIA:
/ justkingadrian
/ justkingadrian
FACEBOOK GROUPS:
/ justkingadrian
/ f150prerunneroffroad
Timestamps:
00:01-00:47 Tools and Parts
00:48-01:18 Getting set up
01:19-03:16 Overview/Inspection
03:17-03:46 drain oil and clean
03:47-04:17 remove crossmember
04:18-05:50 remove swaybar
05:51-07:16 remove axle bolts
07:17-09:14 remove oil pan bolts
09:15-09:41 remove oil pan
09:51-10:47 clean up surfaces
10:48-11:16 Silicone and prep
11:17-11:34 Torque sequence
11:35-12:14 Finish Up
Disclaimer: This video is for entertainment purposes only. Use advice or techniques at your own risk.

Опубликовано:

 

17 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@JustKingAdrian
@JustKingAdrian Год назад
It's been a little over a month since this repair and NO MORE OIL LEAK! Yay! I am super glad that it was only the oil pan gasket and now I can enjoy the truck again without worrying about an oil leak. Hope the video helps others! ✌
@typeXJuggernaut
@typeXJuggernaut Год назад
Very cool 🎉❤
@jesusjesse7407
@jesusjesse7407 7 месяцев назад
Finally a to the point how to video on the 5.4 oil pan. Very thorough and entertaining. Thank you. Great video!
@goneballistic
@goneballistic Год назад
This is a great video cause it's clear, and done like i have to do it. On my back in a driveway, not in some shop with a 3k dollar lift. Great video
@JustKingAdrian
@JustKingAdrian Год назад
Glad you found it useful! As much as I would love a fancy lift someday, sometimes I feel like things are more simple on the floor. 💪🏼 Thanks!
@lancebaxter3819
@lancebaxter3819 2 месяца назад
Great video! Thank you for the upload and time it took to create it. Made the job so much easier on my 4x4
@ninjavice16
@ninjavice16 Год назад
Thank you. Thats next on my list to tackle! 😅
@JustKingAdrian
@JustKingAdrian Год назад
Ya I put it off for way too long but it’s been over a week and it looks like my leak is gone so that feels good! 👍🏼 good luck!
@Marsthemartin31
@Marsthemartin31 Месяц назад
Best vid. Keep doing bro you’re helpful asf
@JustKingAdrian
@JustKingAdrian Месяц назад
Thanks for the comment! 🙏 Need these comments to get the motivation to keep making more videos!
@TheBgred1
@TheBgred1 16 дней назад
great vid, im getting ready to do this, question tho, why did you take the passenger wheel off?
@RichardT7493
@RichardT7493 8 месяцев назад
Thank you so much for your video! It was very helpful! I will be doing this Thursday when weather is a little bit better lol! I do have a question though. Regarding the oil pan sealant, is it only in the corners where you place it, or in all the pan?
@JustKingAdrian
@JustKingAdrian 8 месяцев назад
Thanks for watching and good luck! You only put silicone on the 4 corners to help seal the little joint area you will see.
@thomasautrey1908
@thomasautrey1908 8 месяцев назад
You don’t even have to use the sealant
@cleanclippingslawnservice7128
@cleanclippingslawnservice7128 5 месяцев назад
Great job
@Spaniard20
@Spaniard20 Месяц назад
Question how do I remove lift kit bar to remove oil pan?
@MAGWolf
@MAGWolf Год назад
what was the purpose of removing the swaybar link? it can be done without doing that. Also fairly same process on 97-2003 models too.
@georgeeno_2815
@georgeeno_2815 4 месяца назад
Just gives you the most room to work with
@remingtonhintze1858
@remingtonhintze1858 Месяц назад
What is the torque spec on the oil pan bolts?
@sibagon8815
@sibagon8815 5 месяцев назад
hi, on 7:07 what is that cooler for? engine oil?
@JustKingAdrian
@JustKingAdrian 5 месяцев назад
It’s an auxiliary transmission cooler.
@OzzieMiller
@OzzieMiller 3 месяца назад
Why do I have black sut in my oil pan
@crsskynet
@crsskynet Год назад
cool Video - thx man 😊
@lovealarm9585
@lovealarm9585 5 месяцев назад
Disculpa son 15 libras pie, de torque mas 60 grados en ángulo, cuantas libras mas podría poner si no tengo el reloj para aser las 60 grados en ángulo
@montrealellis8825
@montrealellis8825 6 месяцев назад
Thanks sir
@robertangel10
@robertangel10 8 месяцев назад
What if you just had an oil change? Do you still need to put new oil and oil filter. Please reply a ASAP.
@JustKingAdrian
@JustKingAdrian 8 месяцев назад
I would just to be safe. When you open it up you have a risk of getting new contaminants in there .
@montrealellis8825
@montrealellis8825 7 месяцев назад
Is the oil pan bolted on the timing cover as well ??
@JustKingAdrian
@JustKingAdrian 7 месяцев назад
It is. That’s why you need the silicone to put on the corners where they connect.
@Ramrod-qb6fq
@Ramrod-qb6fq Год назад
Is there anyway to do this without dropping the axle?
@JustKingAdrian
@JustKingAdrian Год назад
I dropped it before even trying to take off the pan so I can't say for sure but just from looks I don't think there would be enough room to get the pan off without dropping it a little.
@cleanclippingslawnservice7128
@cleanclippingslawnservice7128 5 месяцев назад
I’m hoping that’s all mine is too lol
@JustKingAdrian
@JustKingAdrian 5 месяцев назад
Good luck! Mine has held up to this day so luckily that’s all it was. 🤞🏻
@lovealarm9585
@lovealarm9585 Год назад
Disculpa cual es el torque que lleva el oil pan
@JustKingAdrian
@JustKingAdrian Год назад
I'm not sure. I normally go hand tight with a ratchet and then another 30 degrees or so. Not too tight.
@Shakusky444
@Shakusky444 Год назад
Son 15ft-lbs mas 60 grados de angulo. Siguiendo un patrón de torque entrecruzado.
@aaronjimenez2863
@aaronjimenez2863 8 месяцев назад
BAD A!!!!
Далее
would you eat this? #shorts
00:39
Просмотров 3,1 млн
Please DO NOT Buy a Ford (Unless It Has This Engine)
12:50
Should you buy a 2004-2008 F150? Watch this!
12:11
Просмотров 55 тыс.