1. Firstly, unclip hoses pull back orange clips pull out hoses and put out of way.
2. Undo 2 bolts at front of pump using 3mm Alan key for top of bolt and 6mm open ended spanner underneath where you removed hoses.
3. Disconnect flat plug (Black & Red wires)
4. Push pump back - leaving 2 front rubber feet on pump & 2 back rubber feet on base of stainless steel.
5. When Pump is replaced don't forget to put cover over pump and control box - NO cover system will not work.
Return faulty part to Pro Plaster Head Office for checking and/or replacement.
26 авг 2024