www.thingiverse.com/thing:374...
Steps
1. Remove old solder
2. Put on second pair of glasses for extra magnification
3. Align headers
4. Solder one pin on one side and one pin on the other side.
Tips:
- Don't get the headers too hot or the plastic will melt, and the pins will fall out.
- I put solder on the top of the header and pull the solder down to the PiOLED.
- Notice, I don't push the header pins all the way in the 3D printed jig.
-Try not to burn the screen!
- Solder all pins, so one does not accidentally create a short if a pin accidentally gets pushed back.
- For the front middle pin, turn the piece (work) around.
- If solder joints touch, and you can't get them apart, just remove the header and start over.
12 авг 2019