Sony Xperia Z1 Teardown

Подписаться 406 тыс.

Просмотров 976 тыс.

50% 1

We did the complete Sony Xperia Z1 teardown. Follow this video; you will know how to fix your broken Xperia Z1.
Get Original Replacement Parts For Sony Xperia Z1 ： witrigs.com/fqoyx
Steps:
00:05 Remove SIM card holder
00:30 Power off the phone.
00:52 Start to heat and tear down the back cover.
04:38 Tear down the back housing frame.
09:04 Remove the rear facing camera.
09:34 Remove the battery.
10:17 Remove the loudspeaker with two logic boards.
11:04 Remove the mother board.
13:48 Tear down the front camera.
15:20 Remove the earpiece.
17:00 Separate the LCD screen from mid frame.
24:35 Teardown the earphone jack with the sensor cable.
27:00 Remove the RF cable.
Witrigs offers not only mobile repair tutorial including disassembly, assembly, and components replacement guide, but also phone accessories review video on RU-vid.
Publisher: Witrigs - bit.ly/1Avo6o3
Witrigs RU-vid Channel - bit.ly/1HZTLkL
If you are interested in DIY phone repair or latest phone accessories review,
Subscribe Us on RU-vid: bit.ly/1xNoHlm
Follow Us on Twitter: bit.ly/1yIu32C
Like Us on Facebook Page: / witrigsphonerepair
Contact us on Facebook Message: messenger.com/t/witrigsphoner...
Add Us on Google+: bit.ly/17oOFBN
Subscribe Us on Blog: bit.ly/14xGAJ6
~-~~-~~~-~~-~
Like Us on Facebook Page: / witrigsphonerepair
Donate now if you feel our videos so helpful. www.paypal.me/witrigs/2
~-~~-~~~-~~-~

Наука

Опубликовано:

17 янв 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 320

@EricWitrigs Год назад

Get Original Replacement Parts For Sony Xperia Z1 ： witrigs.com/fqoyx

@joelan11 9 лет назад

Thank you so much for uploading this video, helped so much with putting mine back together with a new screen

@RodaReno 10 лет назад

I don't even have a Z1 yet, but when I am never going to tear it down myself, but still I really enjoyed watching this! Very entertaining and very interesting to see the inside of this powerhouse phone! Thank you!

@EricWitrigs 10 лет назад

hi， dear RodaReno,thanks for your review, yes, Z1 teardown is hard work, it is more difficulty than we teardown iphone or samsung phones.

@RodaReno 10 лет назад

Wit Rigs yea, because its build way better!

@andysharp516 10 лет назад

Very good video. No sound but the words underneath explain everything. Thanks!

@EricWitrigs 10 лет назад

You're welcome!

@FrancoMerlo14 10 лет назад

Hello, you're a genius I am from Argentina very good contribution thanks

@jonnieperry 10 лет назад

Thank you. That was invaluable and much appreciated

@EricWitrigs 10 лет назад

You're welcome！

@babakabad6236 4 года назад

Thank you. I save my money because of you. Also it was fun for me :D

@thomasmann9175 8 лет назад

thanks guys mega useful saved me a fortune :)

@givemeajackson 10 лет назад

the size of the motherboard is truly remarkable. this thing packs the same punch as a mid-tier laptop.

@mattgills1648 10 лет назад

I never stop surprising how good Japanese build thing!

@mattgills1648 10 лет назад

Chile Lindo What I meant was that the phone is designed by Japanese and parts are made by Japanese. It was only assembled in China by the instructions given by Sony.

@justbanter8727 8 лет назад

+Chile Lindo assembled in China most certainly however most importantly conceived/designed and manufactured for the most part in Japan.

@justbanter8727 8 лет назад

Chile Lindo Point taken, your argument is a solid one :)

@terran008 8 лет назад

This so cool!! I would love to upgrade my z1 with a white cover but I don't dear to do it, I'm afraid I might ruin it

@givemeajackson 10 лет назад

guitar picks are the greatest tools in the history of mankind!

@baseline4102 10 лет назад

this motherbord looks like the sony PSP and the build quality is good as will thanx for good work :)

@EricWitrigs 10 лет назад

You're welcome, dear basel, which phone are u using?

@baseline4102 10 лет назад

the Z1 :)

@exciter608 8 лет назад

thanks you

@youssefkassori8492 10 лет назад

Please please please i have a very big probleme with my sony xperia z1 and i think you are the only one hwo can help me, please i relly need your answer,so my probleme is that in my z1 i lost the ring around the jack port, the litle metalic ring from pulling out my headphones one time before and now im really woread, will it still be water resistant ? It was before..and will it be replacable ? Its just the little metalic ring on the top nothing else is broken and can i find it eny wair ? The headfones still work. ( i am terribly sorry for my writing am french so :( please help me man i m waiting for your answer and thank you a looot !)

@YagneshDavex 9 лет назад

it took me 2 min to found that this video have no voice lol :P best tear down video bro just try to add sound with instruction next time :)

@EricWitrigs 9 лет назад

Thx for advice :-D

@farisalmiqdad7146 9 лет назад

Wit Rigs this is a great suggestion,but it doesn`t have to be the instruction,some good music should do the trick, to make this autopsy less stressful and eerie :P

@Orakse 10 лет назад

Hi, this video helped me a lot! Thx! Subbed you. I already repaired some devices thanks to your video dis/assemblies. So I´m a bit experienced and it wasnt really hard to dis/assmble this phone. My Z1 has been damaged by water and coudlnt start anymore. So I put the logicboard into Isopropyl alcohol (100%). After two days i assembled it back again, it even started but the touchscreen doesn´t response anymore. I´ve already checked the digitizers flex cable. They seem fine. What could be the reason? Is the digitzer broken, or could it be caused by the logicboard? An advice would be very nice. The phone even worked after i´ve left diving for half an hour. It´s very odd.

@yoeshys8839 10 лет назад

membantu banget

@omnitrix152 7 лет назад

any idea how you replace the wifi chip or whatever? I dropped my xperia a few weeks ago while I was out and when I got home I noticed how significantly the wifi was fucked up, like I can be next to the router now and only have one bar.

@foopy7557 10 лет назад

Ao invés de você ficar destruindo esse aparelho sensacional da sony, manda ele pra mim rsrsrsr

@SerRecor 10 лет назад

hey i was wondering could you do a video showing how to replace vibrator motor or a step-by-step instructions? i dropped my phone and i can ear the difference and it needs replacing... if you cant help do you know how much it would cost for it toe fixed?

@hafrizfikri5733 7 лет назад

hey bro! please do some tutorial on how to replace ribbon power button on xperia z1. thanks!

@phillimu 8 лет назад

Hello man, please tell me, can you change the buttoms flex cable without having to tear down the LCD? Or you have to do it anyways?

@franciscojavierbravocerda3377 10 лет назад

I prefer to be extra cautious with the phone and never try to open it. It's really hurt my stomach when I watched the video. Thanks for sharing it but I'll never try it with my z1.

@zniesmaczony 6 лет назад

Hey, I thought maybe you could help me out. I recently replaced the digitizer on my Z1. i did everything according to many guide videos on youtube. After the replacement the LCD works perfeclt, but the phone is not charging when I plug the micro USB cable, and alco the main camera is not working. Before the replacement everything was fine. Any suggestions? Thanks in advance.

@ggressier972 10 лет назад

hi thx for this video. i have 1 question. i have lost the alu ring around my power button. can you tell me if it 's necessary to make my Z1 waterproof?

@MrCreepjo 10 лет назад

Holy damn look at the glass bend

@Wimdel81 9 лет назад

Hello, thanks for sharing this with us, really helpfull. How hard is it to replace the vibration motor on the Z1?

@EricWitrigs 9 лет назад

Wimdel81 You need to tear down the back cover and back housing before replacing the motor. The back cover and back housing are fixed by strong glue. It is hard to disassemble them.

@SolidHyunkel 6 лет назад

Hi! Is it possible to insert wrong the micro SIM and push it into another place while pushing the tray?

@oconnor247 9 лет назад

do i need to do all of this just to change the frame? as the frame is bent , but the screen is still good

@medaminezarka9401 8 лет назад

after opning my xperia z1 the light on the screen went to the minumum and i can barely see things, please help

@haympanesar2964 8 лет назад

i recently bought an xperia z1 replacement screen but there are no copper connections for the flex cables. would this cause problems? there is only adhesive and no copper areas.

@Foofighterclub 8 лет назад

Hello. I need to change the motor vibrator. Can I replace it without remove the sensor's block?Then, to reinstall the back cover, have I to buy a new back cover adesive frame?Thank you.

@lagg9696 10 лет назад

My Z1 is stuck on safe mode, because the volume down button is not working.. If a want to fix it, with a new main flex cable, i must to remove the motherboard, and buy everything?

@SKyrim190 6 лет назад

I don't know why, but the battery in my phone was glued to the back cover. It snapped the flex connection when I was trying to remove the back cover and stayed attached. I managed to remove it, but I don't know if it dammaged the connection when it snapped off

@MisterBallzley 10 лет назад

Thanks for uploading! Is this any different from the Z1S? I have some particles lodged into the speaker grill, and am wondering if there's a way to clean it inside-out.

@notlisiu.s22user Год назад

Z1s is a Z1 made for T-Mobile USA.

@alusan20raziel 8 лет назад

Hi wit rigs, when i talk with my friend they told me can hear me with quality, they hear me with noise, my down microphone is damaged ? it can be replaced? i actually disamble but cant find the microphone, please can u help me? i can buy a replace

@sanjayhirasker744 6 лет назад

Hi Mate, my xperia Z1 phones power button became non functional and unfortunately it got switched off. Now I want to turn it on but since power button does not work I want your help in knowing the alternate way to switch it on.

@amitgandhi7539 9 лет назад

hey sir i need your help i want to repair my z1 it got bent and when i checked it was dead in india sony doesnt repair z1 what might be the problem with my z1?

@anferneerosal7108 9 лет назад

will it be use again as a waterproof device after reassembled?

@damiancatardo9012 10 лет назад

Thanks for the video!! Abuot the last comment, is it the same LCD for all the Z1 models? Also it woud be nice if you show how to separete the LCD form LCD Supporting Frame.

@EricWitrigs 10 лет назад

With the green LCD Screen flex cable is from Sony manufactor , the yellow one is from Sharp.

@vetrecaGOD 9 лет назад

So I have a problem - my digitizer(touchscreen glass) broke down but the display is in perfect working condition. Is there a way to change just the digitizer without replacing the LCD? Thanks and great video! :)

@EricWitrigs 9 лет назад

vetrecaGOD It is not impossible to replace them seperately by yourself. Maybe you should ask the local cell phone repair shop for help.

@justbanter8727 8 лет назад

Best instruction ever!! - how not to remove the headphone jack!!!? lol p.s. it would be nice if you could show us the proper way to do this, after all isn't that the point of this video?

@marcelojavier 10 лет назад

Hi, I want to open my Sony Xperia Z1 because the phone has an issue with the vibrator. I mean every 1 time of 4 it vibrate with a weird sound, like there is a false contact. Also when I shake the phone i can easily hear a piece detached and bouncing inside. Do you have any suggestions to my problem? Thanks.

@LDDRCore 8 лет назад

You don't have to heat anything up in this phone. Slimply slide the guitar pick is good enough. (0.6mm thick) My fav. phone to repair.

@ganjisai7 8 лет назад

which size screwdriver is used in opening z1....?

@00oZaiBo00 10 лет назад

hi dear.. i have xperia z1 can you tell me any trick to check that my phone opened before or not? actually i am afraid of putting it in water so tell me how to check that my phone is ok for water submersion

@Ottoppers 3 года назад

The internal storage of the phone is on the motherboard or is relying on an external?

@AdhiWulung 2 года назад

Could you tell me, where is microphone locatioan?

@fazreenfashiha6009 9 лет назад

I have xperia z1 but have some problem with it. The simcard are detected but there is no service. I hv tried the sim into another phone, it was just fine. Only with the xperia z1. There is no network. But the phone said that the sim are inserted. Only the service @ network not appear.. I am so glad if you could give me some suggestion or solutions since the phone no longer under warranty. Thank you

@omarabdelwahab7065 10 лет назад

How can I open my z1 after using it underwater it sometimes open but I can't use the touch pad and it shut down again

@irishjoycapati7953 8 лет назад

what will i do my xperia z1 black out,,when i open its vibrating only,,i can received messages, calls,,the camera is functional also, the problem is i cant open my xperia z1 black out... Please help.. is there still chance to fixed or none??

@zahee241 9 лет назад

still better than xperia care in jakarta

@EricWitrigs 9 лет назад

Thx

@nidheeshprakasan4216 5 лет назад

heyi brother my z1 display gets broken and also the body has a bend can you do a vidoe to replace both body and display and also i need to check the condition of phone before its replace if board not working its waste of money to buy dsiplay and body please help ....please

@amirunit150 9 лет назад

Hi few days ago my phone heted up (70%) and when i looked at it the battery became 8% i put it in contact with water the flaps were 100% off but i let it to cool down. When i connected my charger the battery wasnt charging. I turned my phone off. The phone started to charge but suddenly it just booted it self up but the phone stopped charging.when the battery reached 0% as phone shut down and the led indicator was a solid red after few hours i tried to boot it up the phone didnt respond(no vibration) and the red led was still solid. I looked at the lens i found some moisture so i put the phone in rice for 24h the moisture is now gone but the phone doesn't respond some people said i must let it for 24h away from charger then i charge it.is that true or should i do this massacre (no offense) a d put the phone in rice for 3days?

@skocziforest1170 7 лет назад

Hi, my 3 years old Xperia Z1 is overheating, can I do something with the motherboard to fix it?

@aidizikri95 6 лет назад

Łukasz Skoczylas its the screen little lift up...change the adhesive of screen panel.....there some thermal pad there that allow the heat from cpu to the screen metal back panel.

@ferrismelosantos4318 9 лет назад

what will i do ? my xperia z1 can't open cause i used the water proof? when i open the power button it's vibrating only.. guys help me pls

@ShibinShaji 10 лет назад

Is it needed to remove the earphone jack part (you said a tough task) to remove LCD screen?

@EricWitrigs 10 лет назад

hi,dear Shaji, to remove LCD screen that no need to remove the earphone jack part.

@dxcharly 10 лет назад

hello. I have a problem with my Xperia Z1 the touch screen does not work because the glass is crashed, but the lcd screen did not suffer any damage, look perfectly. What can I do? I can replace the touch screen only? or, I also have to replace the lcd screen?

@SoundAsleepSpace 10 лет назад

www.witrigs.com/blog/list-of-all-problems-of-sony-xperia-z1-display/ if this doesn't answer your question then ask again.

@Mick2015 10 лет назад

just need to ask where could i get the lcd from i think ive fecked it up on repairing mine and ive Sony Digitizer lens glass new with out the lcs any help would be great

@EricWitrigs 10 лет назад

hello, dear Mick2015, we sell the lcd with Digitizer, just replacing lcd is one hard work, u can get more info on: www.witrigs.com/oem-complete-lcd-screen-with-digitizer-replacement-parts-for-sony-xperia-z1-black

@asraf2262 9 лет назад

Salut moi j'ai de problème de charge sur Sony xperia z1 quand je branche le charger sa fonction pas sa fait 4 jour com ça je n'arrive pas a charge mon téléphone s'il vous plaît aide moi ....?????????????????????

@jozefbyrtus3299 10 лет назад

There r 3 manufactor s for LCD on z1

@nirliptojibon6690 9 лет назад

hi i have z1 when i using internet in my mobile , its come so much hot . is there have any problem in software or what should i do :(

@Merovingiocba 9 лет назад

Hace unos días sumergi mi Z1 por primera vez. Mis botones de bajar volumen y de power ya no funcionan. Y Android no sale de Modo seguro.

@hcclife425 10 лет назад

exactly what do I need to purchase from your website to do a touch screen/lcd replacement. screen, adhesive, tools, ect

@EricWitrigs 10 лет назад

hello, dear paul bush, u can visit this page: www.witrigs.com/oem-complete-lcd-screen-with-digitizer-replacement-parts-for-sony-xperia-z1-black , we had made a list of the touch screen/lcd replacement. screen, adhesive, tools on this page, and u can find the way how to replace the touch screen/lcd on video,ect

@lavidaloca5039 9 лет назад

Hi, I have Sony Xperia z2. So if I'll open side covers where is micro sim/charger and sd card connections and I'll put phone in the water is still will be waterproof?

@EricWitrigs 9 лет назад

No, it won't.

@DIY_Farmer 9 лет назад

are the steps similar for z3? just discovered my z3 mid frame bend. my phone is still under warranty but im afraid sony wont covered that.

@EricWitrigs 9 лет назад

kelahjelawat Xperia Z3 Teardwon : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9ZLLChEXzWk.html Xperia Z3 Replacement Parts: www.witrigs.com/replacement-parts-for-sony-xperia-z3 Send it to Sony first. It is very hard to replace the mid frame by an amateur.

@farisalmiqdad7146 9 лет назад

the LED notification hole,it`s a dust trap,it is so DAMN difficult to clean,I tried cleaning it with a toothpick but it broke and a piece of it got stuck in there too,I searched online and found some talk about how using something rough can break it`s water proofing,you`ve got any ideas and info regarding the matter? thanks in advance

@EricWitrigs 9 лет назад

Faris AlMiqdad Don't poke the LED or it will not waterproof. It is glued to the LCD supporting frame. If the LED gets loose, the water will damage the motherboard directly. Just try to pick it up by a needle.

@farisalmiqdad7146 9 лет назад

Thank you very much for the advice, it helped

@andrzejzachwatowicz2156 8 лет назад

What was the temperature you warmed the cover up with?

@EricWitrigs 8 лет назад

+Andrzej Zet 100-150 degree celsius is ok.

@andrzejzachwatowicz2156 8 лет назад

Thanks mate 👍

@TheJulianortega 10 лет назад

is can separate lcd display of the touch screen? Please I need know because the lcd display did not suffer damage. but the touch screen is broken

@EricWitrigs 10 лет назад

The display is made up of multiple parts, most have the LCD, the digitizer/covering. So it's possible to separate the touch screen from LCD screen. As for Sony Xperia Z1, it's waterproof function makes this hard. It's likely to break the LCD screen when you remove the touch screen.

@m7valenzuela 10 лет назад

hi! when i was trying to open my Z1, i tore down the back cover... how can i order to replace it? mine is purple... help me please... thank you very much!

@EricWitrigs 10 лет назад

hi, dear valenzuela, it is easy to replace the back cover , u can follow our teardown video, buying one new purple back cover on www.witrigs.com/oem-back-cover-assembly-for-sony-xperia-z1-purple

@takiszezas 10 лет назад

I have problem with my loudspeaker and I need to change the flex cable I've allready ordered it from your shop. Is there a video for that task?

@EricWitrigs 10 лет назад

hi，dear Panayiotis, can u share the link of your ordered item with us? so we can make sure if u choose the right product and tell u how to replace it.

@sonyhx1437 3 года назад

Abri um e agora o neon da frente não liga!

@andyspeight1784 2 года назад

Were to put sim card and memory card

@johnpaulpomida3967 5 лет назад

My z1 keeps on turning off after you turned it on, i already bring it to a technician and he told me that the main board is not working anymore

@Kuttydheek 6 лет назад

I want to buy Sony Z1 c6902 battery original... In online Suggest me orginal ..

@juanchacongz3701 8 лет назад

My Z1 is broken from the sim card slot, it happened when somebody tried to insert a nano sim adapter in the wrong way by forcing it. My question is, can it be replaced or is it soldered to the motherboard? Thank you in advance.

@juanchacongz3701 8 лет назад

Logic board, sorry I'm not an expert.

@erlindavidvisbal1249 9 лет назад

how replace just the mid frame ? will it be use again as a waterproof device after reassembled?

@EricWitrigs 9 лет назад

erlin david Visbal Only once it is replaced by professional repair personnel with original replacement parts, can the phone be waterproof.

@user-qj3vc8tx5c 9 лет назад

I recently got my phone software fixed but when i received it, i cant connect to wifi and that small chip on the bottom right when you open the back is now missing, is there a replacement part??

@EricWitrigs 9 лет назад

Jarcque Veerada It seems the Wifi Antenna lost. You can get the original Sony Xperia Z1 Wifi & Bluetooth Antenna at www.witrigs.com/oem-wifi-bluetooth-antenna-for-sony-xperia-z1.

@mohmaedzain1043 9 лет назад

hi....would you mind to help me?I have some issues with my Z1 the phone can`t open because i connected it to my pc many times ,and suddenly he stopped working

@mohmaedzain1043 9 лет назад

Can you tell me how can I solved this Prob?

@EricWitrigs 9 лет назад

Mohmaed Zain It seems the phone had short-circuited. It is hard to say which part is broken, the motherboard, screen or battery. So we recommend that send it to repair store for test.

@AmitSabharwalmsrish 7 лет назад

my phone got switch off what is problem

@ReckWasTaken 10 лет назад

So i have a Z2, and the metal ring aroung the jack just popped off. does this effect that the jack is waterproof? I'm not sure since I read all these comments about it's just part of the design.

@EricWitrigs 10 лет назад

hi, dear Rick van Oorschot, no, this is not effect that the jack is waterproof.

@ReckWasTaken 10 лет назад

Wit Rigs Okay thanks alot!

@deaaaltaee6530 9 лет назад

شيكرا شفت العائلة الكريمة كلهة والنتة دتفصخ حلو الطموح العدهن خواتك الخوة الزينة كانت هنااااا

@KaGpf 10 лет назад

Hi if i Just want to replace the usb cover, i Just have to remove the Motherboard ? or should i remove the lcd screen too?

@EricWitrigs 10 лет назад

hello, dear KaGpf, if u need replace the usb cover , u needn't remove the Motherboard or the lcd screen, u can see this video How to Replace Sony Xperia Z1 USB Cover +SIM Card Slot+SD Memory Card Slot Cover

@KaGpf 10 лет назад

Wit Rigs ok thank you :)

@yashankful 9 лет назад

hey ! my xperia z1 was robbed in the train ! So is it possible for the thief to teardown the phone and sell all the parts separately ?

@EricWitrigs 9 лет назад

Yashank Desai May be.

@haileabamanuel122 9 лет назад

There is something goes wrong, when I once tried to change a sim card to another one and the Xperia L could'nt read sim card. So can you tell me what i'm going to do?

@EricWitrigs 9 лет назад

haileab Amanuel Are you sure the card you replace is good? If it can't read all sim card, you should replace the SIM card flex.

@BlackJosh95 9 лет назад

What tools used? What torx? I can't found the number!

@EricWitrigs 9 лет назад

***** Xperia Z1 repair tool kit : www.witrigs.com/7pcs-repair-tool-sets-for-sony-xperia-z1 The torx screwdriver: www.witrigs.com/hexagonal-screw-driver

@julianbergmann9105 10 лет назад

So I just broke my backcover and will try to repair it. I just ordered a new one, but I got one question: what is glued inside the removed backcover? Is there any relevant hardware or can i just use the new backcover I ordered? Thanks in advance.

@EricWitrigs 10 лет назад

hi, dear Bergmann, the back cover has adhesive sticker, u don't need any glue, if u ordered our OEM Back Cover Assembly: www.witrigs.com/oem-back-cover-assembly-for-sony-xperia-z1-white , there are four parts are included on it: the anti shatter film, the battery cover adhesive sticker, the NFC and the camera lens on this back cover..

@SoundAsleepSpace 10 лет назад

how did your repair go?

@julianbergmann9105 10 лет назад

Oh, everything went well. I used a hairdryer to heat the cover up, removed it carefully and glued the new one on the back. It was much easier than I thought :)

@spetsnaz6739 3 года назад

where is the internal storage ?? i broke my phone but need to get my internal storage to retrieve the data.

@shravanveerkohli64 9 лет назад

What do I use for adhesive to reassemble the phone again?.....

@EricWitrigs 9 лет назад

Shravan Veer Kohli Back cover sticker: bit.ly/1eFG2Gp; LCD supporing frame sticker: bit.ly/1ADVHzO; mid-frame sticker: bit.ly/1dCZmnr.

@jozefbyrtus3299 10 лет назад

Pls tell me who is manufactor of lcd on that video? I thinking that is sharp, but there is no mark to confirm my

@EricWitrigs 10 лет назад

With the green LCD Screen flex cable is from Sony manufactor , the yellowone is from Sharp,our video's lcd is from Sony manufactor.

@jozefbyrtus3299 10 лет назад

Oh many many thanks.

@EricWitrigs 10 лет назад

Blekota Blacky You're welcome!

@jesuscaballerogarcia884 10 лет назад

osea que la impermeabilidad del telefono se debe a ese adesibo que le ponen a ala tapa? un simple adesibo?? pegamento??? por asi llamarlo?

@SilentSword0hz 5 лет назад

adhesivo burro

@Gasotoru 5 лет назад

¿Ala... de pollo?

@thislittleguy5925 6 лет назад

Did you find the problem that's causing the overheating? Which part is it? Is it the battery that's overheating? Can you fix the overheating problem?

@Sunnykr275 6 лет назад

This LITTLE Guy I want the answer too ,,my z1 Xperia battery is getting larger idk what to do .....overheat or else

@aidizikri95 6 лет назад

change its screen adhesive....

@mathaelectrics1952 Год назад

sony xperia E3Zone board undo

@kev5525 9 лет назад

I have one just like this... My vibration stopped working yesterday.. Do you recomend me to open it and to try to see if there is anything loose in there?

@EricWitrigs 9 лет назад

kev5525 For repairing the vibration, you have to open the phone. DIY repair can be risky. If you have no confidence, send it to repair.

@UserPauli2592 9 лет назад

How was your vibration the days before it broke? My vibration sounds strange and feels more heavy than before

@kev5525 9 лет назад

My vibration was intead becoming heavy it was becoming more light To feel and it was making strange noises.. After 1 to 2 weeks it went out. I love sony products.. I hope the z3 wil be better

@UserPauli2592 9 лет назад

kev5525 From the z1 to the z3 isn t such a big jump. I guess I will wait for the z4 :) thanks for the response

@pettersoncarvalho1554 10 лет назад

My back cover broke, and I will only exchange it. My doubt is in the assembly, this glue which comes in the new cover or have to buy something specific.

@EricWitrigs 10 лет назад

hi, dear Carvalho, all of our original back cover have Adhesive Sticker , so u needn't to buy any glue.

@estebanmesa7125 9 лет назад

Its necesary to buy the housing adhesive?

@EricWitrigs 9 лет назад

Esteban Mesa Yes.

@wanhl2440 10 лет назад

Can you assemble the parts again?

@EricWitrigs 10 лет назад

yes, we have this video: Sony Xperia Z1 assembly after disassembly

@GarageGuerilla 10 лет назад

will it affect the waterproofing capabilities? reply please I have a broken Z1 screen

@EricWitrigs 10 лет назад

hello,dear carlo, u replace a new Z1 screen and make sure all the adhesive stickers are tightly on your phone'parts, your Xperia Z1 is still waterproof under the professional install skill, powerful confidence and considerate heart.

@GarageGuerilla 10 лет назад

Thanks a lot :-D