SOVOL SV01 Pro 3D Printer Overview

Подписаться 362 тыс.

Просмотров 7 тыс.

50% 1

sovol3d.com/pr...
You can order SOVOL products using this link to help support the channel: sovol3d.com?sca_ref=2589314.1guw8I0XTX
A quick price comparison between this (at the time of publishing, on sale for $279, normally around $329) and getting something like an Ender 3 V2 and upgrading it to have roughly the same specs:
E3V2 - $259
Direct Drive - $40
Dual Z - $40
Flex magnetic bed sheet - $12
BL Touch - $48
Runout sensor - $15
Total - $404
And you still will have a smaller print surface than the SV01 Pro (220x220x250 vs 280x240x300).
The Ender 3 V2 had previously been my go-to for like 99% of my prints, and is a fantastic printer, but this has quickly replaced it for most of my printing due to the ease of use, quality of prints, and larger bed size. It really is a fantastic printer for most purposes, but especially 2A related ones.

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@theblindsniper9130 Год назад

Man now this is an awesome machine, I have been foaming at the mouth to get a printer for myself. One gun channel to another, very solid sub from me.

@printyour2a414 2 года назад

So, alcohol is a solution?

@illogicalbear6200 2 года назад

Alcohol, the cause and solution to most of life's problems

@Martinroadsguy Год назад

Alcohol bought in stores is usually a solution.

@cecilsharps Год назад

I just ordered one yesterday. I know nothing about 3d printers except i wanted direct drive and dual z axis. Your video made me feel better about my impulse purchase.

@karthikeyans8922 Год назад

How is your experience using it now? I am looking to buy this. Appreciate your thoughts

@cecilsharps Год назад

@@karthikeyans8922 it was an xmas present to myself so i just opened it this morning. I ordered it from sovol directly. It was 60 bucks less than on amazon and arrived in a week.

@comeoutandpla 2 года назад

For what it’s worth, the Vyper leveling system works really well with the community firmware update

@booliganshootingsports 2 года назад

I'll have to look into it. I have other frustrations with my Vyper that relegate it to a backup of a backup printer currently, but that would be a beneficial update.

@BoneistJ 2 года назад

@@booliganshootingsports I just got a Vyper. What would your chief complaint about it be?

@justjoe8660 2 года назад

Awesome review! Makes me proud I chose this printer instead of ac-kobra that someone suggested

@darbodrake89 Год назад

This feels like an ender clone, but looks like someone actually knew what they were doing on the software side. I have an s1 and I can only call the experience with the screen and menus as clunky and unintuitive.

@MrBaskins2010 2 года назад

this printer should be the new industry standard

@triblade1669 2 года назад

I'm looking forward to the sv05. Not a bed slinger and one small upgrade and firmware upgrade and you can print nylons.

@TheHiddenPart Год назад

Congratulations on getting recognized by Karl at InRange!

@guerrinlove69 Год назад

Just watched your short on the AR56. Did you design the pistol grip or is there an open source file somewhere? I'm making that same kit for airsoft after watching it. Already got the flycam vest ordered lol

@booliganshootingsports Год назад

I designed it. There will be a full file and tech package drop once it’s all done.

@guerrinlove69 Год назад

@@booliganshootingsports awesome man, continue doing what you do brother!

@kwyldeman 7 месяцев назад

Is the Sovol SV06 plus just as awesome? I'm assuming the 06 model has some kind of upgrade. At $289 it seems doable, but info might as well be written in Latin as I have no clue what any of it means. Help, please. Btw, love your content.

@jonfernandez4933 Месяц назад

I have a SV04 IDEX and a SV07+ can I can't wait to order a SV08

@PoopPheast420 2 года назад

Hey just to let you know the link in the description doesn't seem to be correct.

@booliganshootingsports 2 года назад

For the referral link? You just have to copy the whole thing. Their URL structure is strange.

@freshcharge 2 года назад

It's comparable to the E3pro with the sprite direct drive. But $300 less. Now I wish I got this one. The thing I dislike about this printer is the basic stepper motor for the extruder.

@darbodrake89 Год назад

What do you mean?

@freshcharge Год назад

@@darbodrake89 about the extruder? The sprite direct drive extruder stepper motor is smaller and lighter than the common ones used for the zed screw and X,Y. More weight on the print head means it can't run as fast without more errors.

@Terry2Cool 2 года назад

for 3d printing guns, do you need to buy the metal slide kits? or can you just 3d print it and install it on the lower for the gun? even if you can’t shoot it.

@joeoday418 Год назад

you can put a 3d printed slide on it but DO NOT shoot it, it will explode and you will get severely injured.

@jamesowens2781 5 месяцев назад

After a year your opinion now? Looking into a printer now for 2A

@3DBogie 2 года назад

Very nice video 🙂

@joshuahubert1096 2 года назад

What 3-D printer do you think is good for a beginner

@booliganshootingsports 2 года назад

I mean, this one.

@daybreaker1539 2 года назад

@@booliganshootingsports exactly

@joshuahubert1096 2 года назад

Ok thanks for your help

@fruck2896 Год назад

This looks almost exactly like the ender s1, same leveling system and hot end setup as well as the magnetic build plate with the spring legs. Do you use the A5 paper method to get the z axis set correctly? Also do you notice any difference between leveling before a print and not leveling at all?

@booliganshootingsports Год назад

I do use the paper initial bed level method. I don’t level between prints, only if I notice an issue in the first layer.

@user-mi6ew2cr8y 2 года назад

Do you have a good Cura profile for this printer yet?

@TrungTheMaker Год назад

nice! i need to try fuzzy skin some time.

@user-pq5cn2gq5b 2 года назад

Why so much people think that TPU doesn't do well with Bowden? I got stock ender 3 and it prints TPU perfectly

@g.4279 2 года назад

The retractions through the teflon tube mess with the pressure of the filament. It used to be really bad but modern profiles have solved a lot of issues with it

@dagamore 2 года назад

Have you use the Ender3S1? and if so how does this Sovol stack up against it?

@booliganshootingsports 2 года назад

I haven’t used one, but their specs look comparable. The Ender has a higher price and smaller print volume though, but it looks like a decent machine!

@nobodyyouknow1065 2 года назад

One day you’ll be able to 3D print a 3D printer (which might just be called a replicator by then).

@KITDFOHS 2 года назад

...I sorta did...Started with an old gen 1 tevo tarantula, modded the heck out of it, then printed the parts to make a Hypercube. Made the hypercube and used it to print the parts to make a 3rd printer which has yet to be built because I grabbed an Ender 3 pro for $99 from microcenter earlier this year.

@simoncleret 2 года назад

That was the end goal of the Reprap

@BoneistJ 2 года назад

You can do that now.

@DanielMendoza-vz6ss 2 года назад

Are you able to upgrade the board to make the printer silent with a drop in like an ender? Edit: Looked into it. This printer is silent board upgradable.

@Shep01 2 года назад

Comes with a 32 bit silent board. If you buy it and upgrade can I have the old board? Mine is only 8bit.

@joman104 Год назад

SiFi 3011 when?

@Timanator Год назад

You are luckier than I, mine arrived broken.

@Ruwdawg Год назад

i just got my sv01pro like you suggested, where can i find 3d print files for handguns?

@booliganshootingsports Год назад

Lots of places. The Gatalog, deterrence dispensed, AWCY, Booligancustomgunworks, etc.

@Ruwdawg Год назад

@@booliganshootingsports thank you again sensei

@Ruwdawg Год назад

I'm new and I'm not finding colt 1911 45 military series. And I would love a .22 auto handgun to plink cheaply. Can u help?

@cornpopsgarage3 Год назад

Everything okay? Long time no video

@booliganshootingsports Год назад

I upload shorts regularly. Long form content isn’t working well for me on RU-vid given their current rule set.

@cornpopsgarage3 Год назад

@@booliganshootingsports ah, that's why. I'll have to start watching them!

@robertb7003 2 года назад

How would you compare it to a prusa mk3?

@booliganshootingsports 2 года назад

I've never used a Prusa, but if we're looking raw specs of something like the MK3S+, they share many of the same features. Auto bed leveling (touch vs sensor probe), direct drive, dual z screws, runout sensor, etc. The Prusa has a much smaller print area (250x210x210 compared to 280x240x300) and uses an 8 bit board vs the 32 bit board here. Prusa has some nice software, sure, but I'm not personally seeing any reason whatsoever to pay $800-1100 for the Prusa when this has all the same features and more for $280-320.

@robertb7003 2 года назад

@@booliganshootingsports interesting, thanks. I'm making a small business 3d printing service and this printer seems to be a viable option for my print farm. Currently making the website + backend for it

@booliganshootingsports 2 года назад

Good luck! Print services, especially for non-regulated 2A type items (think grips, body kits, everything but receivers) are few and far between. People would love if they could order things like my Rough Rider and Wrangler sci-fi body kits pre-printed.

@robertb7003 2 года назад

@@booliganshootingsports that seems like it'd be a great way to kickstart my business. I may contact you later regarding this. Thanks

@darbodrake89 Год назад

@@robertb7003 the difference is reliability and backend support. A friend of mine runs a printing business and only uses prusa. Personally I've picked up a mk3s and an ender 3 s1. Despite moving 4 times I've only had to recalibrate the prusa once, the s1 I've been messing with several times and continues to have some weird software glitches. (The bed doesn't heat sometimes) Both printers I would recommend. Prusa does also have a calculator you can use to generate quotes off of models.