It is hard work getting to that one spark plug all fairing & tank has to come off & black rubber protection cover makes it hard to see anything .Iridium plug good for few thousand miles/Km , just done mine u should have put new air filter in while it was out.
Bule doyan motor yes dude. Here in my country the spark plug costs around 300 Nepali rupees but the labor charge is equal to the amount of spark plug 😅
Cool. That plug was still good to use for another 20k km at least(vs new almost no difference but discoloration) and honda manual states the air filter needs to be replaced and never serviced with forced air tools. Thanks for the upload though!
So much work involved. A single piston bike with 1 spark plug . I've done 60 thousand kilometres with my spark plug. It does'nt need to be changed yet because the bike still starts and runs perfectly fine.
Instead of removing the tank try removing the side fairings and radiator. Because the pump under the tank costs too much, if you drop it or damage it accidentally, you will feel it
honda design the bike with the iridium spark plug which should've last for 100.000 kilometer but yeah .. still honda suck for that design i mean you should be able to easily take out for maintenance right and i hate how the reservoir water cooler cover is so out of place why do you need to use screwdriver to add water for the cooler .. and by the way mine still use the original spark plug from the factory... and i hope it will last for more... since my bike has reached 32 k on the odo....
The iridium spark plug is made for lasting 32.000 kilometers, so time for you to change it you can see me reading the info on the package of the spark plug at 5:41 😜
If a spark plug fails the bike will quite simply not start. My spark plug has done 60 thousand kilometres. The plug still starts and runs like it is brand new.
Where is service manual? 1 Remove Fairings 2 Remove Radiator to the side and push it down 3 Now you can change your spark plug without a problem a little bit awkward but can get the job done
Ok dont need tear that much apart to pull the plug 1 remove gas tank . 2 just above the plug is a hole in the rubber cover . Calm down the apprentice take a breath