SPECIAL Milwaukee Tool Driver Bit Accessory YOU Can't AFFORD NOT TO HAVE! 

I’m still waiting to see the jelly magnet that fits on the longer 2” bits

My b-day today I'm an old fart now 60 but nobody in my family got me any tools or accessories. I had a great day anyway. What up VCG

Milwaukee needs a bit store like a LEGO store. Let people build their own kits instead of making them buy bits they don't need.

I actually bought one of these when i got my first milwuakee drills. It’s a HUGE help at keeping your drill on the fastener and keeping the fastener straight.

One place I've found that this extension really shines is with driving or removing slotted screws. I repair and restore wooden boats and some of them have slotted screws. We currently have a restoration project for a local maritime museum and we have to use slotted screws instead of using a different drive like frearson or phillips. Theres few things worse than installing a part with a slotted bit in yout impact or driver and the slot slipping out, digging into your part. This sleeve is fantastic for that. It keeps the bit from walking out of the slot and gouging your part or the boat. I have 2 of these and my boss bought a few for the shop. Super handy and well worth every penny

I bought the kit because I do building maintenance and I outfitted the kit with common screw bits I use and it has saved me A LOT of time from going back to my office to get the correct bit needed for the job I just keep that bad boy in my back pocket and ready for whatever I need! If you use it as a screw driver don’t use a lot of force because you can ware out the part that actually holds the extended driver and it will not function as good as it used to but still VERY HANDY. Great video VCG I love all the videos you guys use and refer to them a lot for tool purchases 💪🏼

When I was younger and when I worked with my dad everyday at the end of the day everyone would have to clean up the job clean and put the tools away there was one thing that would upset my dad and that was a filthy job site plus he also had a certain way so you to roll up the extension cord it was a slip knot this way to cord would never twist but also no one will get hurt some tripping over something.

Yep, why I am here. To see how to change the bits. Difficult to pull that bit out of the tool is an understatement.

I am a fan of the Makita magnetic bit thingy and Dewalt bits in my m12 screwdriver. Doing mostly #1 machine screws, it works perfectly

I’m a New Yorker over head door technician and installer! Vince I got ur back ! I watch all ur vids every one and I’m telling you just today I was thinking the same thing and tomorrow I’m firing on this guide

Greetings! Another excellent way to do away with cam out and such. Robertson style heads the square drive. Coupling a square drive with a sleeve you nearly eliminate cam out issues and your screw almost never falls off.

I used this all day, today. I have to cosign on what Vince is saying here. It's one of those things that you won't fully appreciate until you need it, and then you'll never forget it at home.

I would buy the kit just cause it make more sense. I mean for 2 bucks more why wouldn’t ya! Plus I’ve had my craftsman one for years and still use it to this day. I thought it was the smartest thing! No lost screw and no wiggle! GENIUS!

I snapped my Milwaukee sleeve working on a deck project a couple summers ago. So when I went down to Home Depot to replace the sleeve, I saw that 12 piece kit. I said to myself, it was a no brainer to buy it. Couple dollars more for the extra bits and bit holder. Good value! Great video as always, Have a great night!

Is this new to anyone? I got one when I bought my first porter cable drill in '99. I even had a flip bit and a quick change bit way back then. It was impressive seeing 6 minutes filled up with an explanation including more excitement than I had when my first kid was born. All smoke aside, you put out some pretty good stuff though Vince.

It is a great bit at first but the sleeve comes off after continuous use. I had mine come with the driver bits but was the gen1 versions. Great video, Vince but I hope Milwaukee makes the sleeve much more longer lasting either way it is still worth having in the most difficult extended reach screw fastening.

Had one for a while now. They are a lifesaver, especially when up a ladder trying to secure a CCTV camera up high in the ceiling or a wall up high.

Vince, agree with you, and do like mag sleeves. Haven’t tried this Milwaukee one yet, but I personally don’t care for DeWalt’s at bit holder, and sleeves; cuz getting bits OUT after out a 1” bit into one....well, let’s say, not even my Vice Grips have luck, & so one of my fav bit kits (DeWalt MaxFit kits/bits) mag bit holder get thrown in the bin right when I open them up😂 Been giving the latest Milwaukee bit sets a fair shake; as been using “mostly” for last 3 months. Do sometimes find myself reaching for my maxfit out of habit😆. But am trying to see how well the bits hold up over time and “age”; along w/ the bit holders and other accessories that come with any bit kit. DEFINITELY making a trip to my keyboard and ordering this Milwaukee mag sleeve to give a try. Thx for the tip👍🏻 My current 20 RU-vid old mag sleeve, doesn’t fit every fastener I use daily ( a pain cuz love using mag sleeves); so if this Milwaukee gets job done and works well for my needs...I’M SOLD! How’s the Gen 3.5 impact driver treating you? Still haven’t been able to get a hold of one, but keep trying (& won’t give up). Cheers to you and VCG FAM (stay safe and be well) ✌🏻

I had a dewalt one like this years ago, glad to see milwaukee put one out finally.

I've had 2 of the craftsman ones for over 20 years when I bought there first 12V drill and still up until today work perfectly as day one. Of course back then when they were made in USA. The drill? R.I.P and in its original case. Still nice to see a comeback of old useful tech.

I bought the kit 2 month and it's been great I keep it I'm my pocket at all times!

My favorite bit holder by far!! I spent the two extra dollars to get that small kit and takes up way less room in my packout backpack. I appreciate your videos @vcgconstruction

HD ordered free delivery. Done. Can't wait to try it.

Kudos for NOT editing out that first rip...too funny...

Nice thanks for the update VCG😎

Happy Tuesday!! Thx for the video!!

Hi Vince, Too funny..This tool was first introduced by Craftsman. I still have three of them for about 10 yrs. It wasn't a very popular tool because you couldn't see through the sleeve. Then a few years later Makita made one that you can see through. Now it's becoming more popular. Still a great tool bit to have.

I got the 3pc set 48-32-4519. Go Vince! PS I got that Driver Guide Set also. Loves it 👍🏼.

Good info. I checked HD online, and there are actually 15 of those available in stock in my local store. They must have just added the SKU in. And we got the kit too. Ordered a couple.

Vince, I found a Milwaukee 48-32-4519 Shockwave 3Pc Impact Magnetic Drive Guide Set for 11.11 and jumped right on it bro. Thanks for the tip. Greatly appreciate it.

Great Tip Vinny Thanks

I had to buy kit to get one of those. I'm glad to hear u can get it like that now.

Yeah, the bit retention on my Milwaukee magnetic shockwave bit guide is “ridonculous.” I need a vise and pliers to remove bits from the guide. Definitely an issue. I’m using a Dewalt sleeve now with my Milwaukee impact driver and bits. I do agree that the sleeve is the way to go. PS, born, raised, and educated in Philly. Out West now. Ain’t coming back, paisano. Ci vediamo dopo.

I use the sleeve also. I love it!

Just picked up the kit on Sunday. Was surprised to find it at HD. Never saw it before.

Love love love my sleeve.

That's exactly what I did when I bought my sleeve last month!

got a Dewalt one with a drill kit a few years ago and I always wondered why no one else made them

I grabbed the one with the wire stripper today it's a good kit but the makita XPS mag boost is still my go to. Never knew you were from south Philly. I'm 18th Oregon born and raised moved to marlton six years ago

Got mine a month ago at ACE Hardware. Love it.

Great stocking stuffers ladies

The day after I bought the Shockwave bit set, I went back and purchased the sleeve. I took out the magnetic guide from the set and replaced it with the sleeve.

I've always used the Irwin sleeve. Didn't know Milwaukee made one. Irwin includes it in their kits.

my blessed friends u and the mrs I have the wire stripper kit with sleeve and nice sir

@vcg construction I just bought it on sunday and today I see this video 👍

Yes put it in the kit

Been buying these kits in Texas for a year now, they are better than the ryobi , and dewalt aluminum style that have been out for the last ten years. They always seemed to break when the o ring would sieze up.. Since I used to run the makita 18v nickel metal hydride stuff I've been using them.. I think they used to call them a "screw boss" keep it up Team Red

Vince I have a question about the Milwaukee bit kits So since the box’s have rails on the bottom does that mean box stack together like dewalt tough case

great item

Use this type from holder from Dewalt and it came in the kit, and is so good by the way

The milwaukee one was hard to find for a while there. The Dewalt ones only last a week. I've had my milwaukee one for months

i've had my dewalt 4" driver sleeves for at least 15 years, because i slid off a 4 " sheet rock screw and landed my index finger seccond joint . and luckily the bone stopped it or i would have had a cut up to my shoulder, so i went lookin for another option,, and home depot had a kit with it in there

Ive used a Black and Decker sleeve for years and all that time ive been hunting for a milwaukee. never found it at my Depot ether!

I just recently dropped my impact with the magnetic sleeve extender from a 20ft roof and bent my sleeve. I tried straightening it and i broke it so a new one is needed asap! Drill is completely fine from that fall! Milwaukee is build TOUGH!

Coming to this video in June of 2021 and I just ordered a bit kit with this sleeve/magnet bit included… I’m only 99% sure because it hasn’t come yet but I’ll come back to this comment when it comes:)

Crazy because I was just looking at the guide on Sunday when at Home Depot! I’m glad I didn’t buy it though, because I’d rather spend the extra couple bucks to get a case and some extra bits! Good looking out Vince! 🤜🏼 🤛🏼 Take care brotha and be safe!

My Ryobi 70-piece impact bit set came with a sleeve. If the Ryobi comes with one why doesn’t the Milwaukee?

Can you do a test on t25 bits or t15 t10 for fitment, most t25 impact bits either don't hold fasteners, or they don't last very long

Very Helpful video. I recently changed from Dewalt to Shockwave due to the packout but i find shockwave case and holder very tight to take out in 3-4 sets is this a common issue! Cheers VCG

Hello VCG Thank you for the video

I have been looking for a good one of those and didn't know where to get them.

What if you used other type screw heads and bits, like torx or square, is there less cam out than with a philips?

I have a Ryobi that slides out to assist in screw retention, but if I torque hard the driver bits twist and jam inside the holder. The Milwaukee should be a better tempered steel and handle hard torquing situations.

I definetly had an issue with that c ring. I had to use pliers to pull it out. I didnt understand why it almost made it permanent

Buy the kit all the bits plus the sleeve

Keep up the good work Vince

Aaaaand order placed for that magnificent bit....

I'm pretty sure I have one of those somewhere from dewilt. Got it like 10 years ago.

3/8 impact hog rings don't hold sockets have even tried new ones any fix? Just got the impact thought maybe bad ring but same problem with new rings :/

Oh they've had this. Ryobi had a 3pk of different lengths, good when you're in a pinch and can't find the milwaukee 😂.

Nice!!!

Nice Benchmade.

7:05 thought I got an offerup notification lol

currently looking for milwaukee shockwave impact driver bit set. model 48-32-4021. but there are 2 different sets with the same model number. one of the sets has all black bits and the other has silver bits. is one of them better than the other?

What kind of safety glasses you have there Vince & where can you get them. Keep up the good reviews

Woooooooah lol. Love it every time

Bought one a while back because of the idea behind it and hardly ever used the sleeve

Just bought my 12$ kit today the bits do stick in i was confused at first as i didnt think the bit that was in there came out at all

I’ve used DeWalt bits for years.. I love my DeWalt... but I have to agree with you on this one.. I would much rather use Milwaukee shock wave bits!! They are the best on the market!!!!

The only problem with this magnetic bit sleeve is that when using impact drivers while the sleeve is not extended, the vibrations of the tool can cause the sleeve to shimmy over the fastener and obscure the screw. Other than that it's a huge frustration saver!

What do you think about the doer portable workshop and do you think it would be worth getting

Late to the game. For about 25 years Dewalt has had one. 🧰

Ace hardware has a 3 pack 3 in 4 in and 6 in $22. I was looking in the store and stumbled on this. Link in the reply

I love your vids man huge fan

Soon as I seen it I got up from the couch, put my daughter in her car seat and headed over to Home Depot to purchase that sleeve kit ..

You should try guild drills I think they are pretty good

I told you about this months ago and I can prove it.

I have like 4 of those they do work fine, just forget there their lol

Sorry for my question. Must not have been thinking. Of course you wear the Milwaukee clear fog free safety glasses with gasket available at the depot for $29.97

Nice

Go with the kit

Dammit I love this channel.

I have a bit holder that is very hard to remove bits

The retention is to much when using a small head bit. Used a small Allen key but to install bath hardware. Had to use a set of pliers to pull the bit out of the extension because I could not grip the bit head. #2 phillips comes out easily.

Much love VCG!! @vcgconstruction

I wish Milwaukee would make a clear top lid for their drill bits boxes. I buy Milwaukee bits and use dewalt bit boxes it's nice to see what's in them

I have a dewalt similar to that but it does not have the markings on it. I had it for years.

Still use my craftsmen set from years ago ... when sears was sears

Lightest west Milwaukee for a woman 12 v with charger and bits

how are you all storing your loose bits? can't find any of these bit cases sold separatly with no bits