Squarebody Chevy Dual Exhaust Installation and Test Drive - Flowmaster American Thunder

Подписаться 178 тыс.

Просмотров 19 тыс.

50% 1

Here's a very fun video featuring the first upgrade to my "hand me down" Chevrolet Squarebody Pickup Truck ... the Flowmaster American Thunder full dual exhaust system. Kit 17742
I'll run through the complete install, including the only tricky part... adapting from the H pipe to the stock down pipes on the small block 350 in this truck.
Couple things to consider when ordering a kit for your Square body Chevy... even though this is a 1976 C20, not the more common C10, it doesn't have catalytic converters so the kit was an easy fit but the Amazon shopping filter said it wouldn't fit this vehicle. So do a bit of detective work to make sure you order the right option for your rig!
Here's a link to the AutoEdits Amazon store www.amazon.com/shop/autoedits
In the shopping list for Square body Truck is this kit. Any shopping you do after starting on this page helps sponsor this channel... so grab a set of my favorite Grease Monkey Bones gloves or some Lucas fuel treatment while you're there.... THANK YOU!
Here's a link to the Flowmaster (Holley) web page, it's where I'll be shopping for a ton of more stuff for future upgrades to this truck...
What should be next???
Thanks so much for watching!!!
00:00 Introduction
01:22 Installation
04:59 Tailpipe options
06:11 BEFORE and AFTER Sound
08:14 Test Drive
13:39 Full Sound Clip from Startup to Drive Away
#chevy #exhaust #flowmaster #squarebody

Авто/Мото

Опубликовано:

9 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 136

@qasimalsaidi Год назад

Challenge for Jason's fans. Who can top that?

@AutoEdits Год назад

DUDE!!! This level of support feels so dang good and is so appreciated... Thank you!

@red07ls Год назад

$4.99. Who’s got next?

@AutoEdits Год назад

@@red07ls Yeah buddy!

@qasimalsaidi Год назад

@@red07lsheck yeah. Thank u

@AutoEdits Год назад

Howdy Everyone... Thanks so much for being here and watching!!! Please hit the thumbs up for me if you like this one, I had so much fun making it!

@jimcabezola3051 Год назад

I wore my earbuds for this video! Your truck sounds really cool. The placement of the exhaust tips looks killer; who cares about the spare wheel? Toss it in the bed, tie it down...and enjoy! What a great mod!

@TommyRibs Год назад

Do you still have large marge?

@AutoEdits Год назад

Had to sell the Mustang a few years ago 😢

@crbourret 6 месяцев назад

Keep these old trucks alive!🤟

@AutoEdits 6 месяцев назад

THANK YOU SO MUCH!!! I to love these trucks

@PonysGarage Год назад

Heck yea! 2 videos in 1 week. Really missed your content. Keep em coming. Thank you Jason! 💪

@AutoEdits Год назад

Thanks! Will do!

@cwyoming7004 Год назад

In high school, I loved the square bodies that had the side exhaust. In the cold, you could look out the side mirrors and see the exhaust puffing away. Yours is cool too, of course. Thanks for bringing back the memories.

@AutoEdits Год назад

That's one of the things I love about being a "car person" Having fun memories attributed to a vehicle or even a sound.

@TaekwondoFitForLife 2 месяца назад

Bet it's quite to you because now the pipes point away from the cab even further than prior.. out the sides you'll hear it more.. cool!❤

@Skitter302 Год назад

Alright! Talk about a very rewarding upgrade. I like the center exit, nobody else running it like that.

@AutoEdits Год назад

Heck yeah!

@sscottphillips1973 Год назад

That is a very clean square-body. Straight out the back is always better for cruising, hear it when you want to, and quiet when you don't, lol

@AutoEdits Год назад

🤘

@jonathanwelter Год назад

Great video and fantastic upgrade!! Love that sound.

@theartmannchannel Год назад

Hell yeah! Don't ever stop these videos! Great stuff every time!

@chaddressler9132 Год назад

I love the joy and happiness you bring to your videos keep the fun up.

@AutoEdits Год назад

Thank you, I will!

@biz4twobiz463 Год назад

enjoyed the video. I've always been a Flowmaster fan...and your upgrade looks fantastic. Especially liked the attention to detail with the bolt-on hangers! Merci

@AutoEdits Год назад

Thanks! 👍

@radomark408 Год назад

I think it looks and sounds great coming out the center like that! Well done

@AutoEdits Год назад

Thank you! Cheers!

@brian2359 Год назад

Great job! Sounds awesome!

@AutoEdits Год назад

Thanks a lot!

@robars1575 Год назад

This is the kind of video that makes me want to work on my own ride. Thanks for sharing 👍

@AutoEdits Год назад

Go for it! That makes me very happy to hear.

@thenateclineshow Год назад

very stoked for this. Over here in the Appalachian mountains, i see these trucks all the time but they’re rarely taken care of.. To see this one in such good shape and to know you’re going to give it the justice it deserves is just fantastic!!

@AutoEdits Год назад

I hope so... LOL!

@bradsbuilds 9 месяцев назад

Excellent video! Very well put together.

@AutoEdits 9 месяцев назад

Thank you kindly!

@adrianmurillo2646 Год назад

The truck sounds great, awesome upgrade!!

@AutoEdits Год назад

Thanks 👍

@justintelemaque9636 11 месяцев назад

I watched your channel a while back on your 3rd gen camaro, I didn't even realize that was you until I went back and watch some of your old videos. I found your channel again because I just picked up a 78 c20 and was searching c20 videos. I'm excited about your c20 project. Keep up the great work

@AutoEdits 11 месяцев назад

Howdy! That is really cool to realize how long I've been tinkering away at this and glad you're back!

@crbourret 6 месяцев назад

I just inherited a 1992 F150 from my father-in-law with 53K on it, looking forward to upgrading the exhaust to this system, sounds awesome, great video man!

@AutoEdits 6 месяцев назад

I still like the sound a lot!

@Stuka87 Год назад

Is really cool that they make a lot for an older truck. Great sound, and no drone is pretty surprising. Oh, and that wide angle lens in back makes it look like a drag car with super wide tires.

@AutoEdits Год назад

Ha!

@TheDon8771 Год назад

Sounds perfect

@shadowj5639 Год назад

Sounds like a scene out of Mad Max when you give it the beans. Great looking and sounding truck.

@AutoEdits Год назад

It does!

@ThePete2432 Год назад

Truck sounds great!

@AutoEdits Год назад

Thanks!!!

@sonnysouthon1963 6 месяцев назад

I love this truck I really want one I'd keep the after market exhaust at the back and make a frame for the spare in the truck bed with fog lights On the roof blacked out would raise it 2inch with chunky mud tyres and a blacked out bull bar with light bar and electric winch cable

@AutoEdits 6 месяцев назад

Excellent suggestions!

@fernandosaldivar238 4 месяца назад

Nice work brother sounds like butter love the idle sound 😀

@AutoEdits 4 месяца назад

Thanks! I still love it!

@robertr5104 Год назад

Can't go wrong with Flowmasters. I put them on all of my vehicles.

@AutoEdits Год назад

They have such a deep selection of vehicle kits... the most of any other brand and I've never been disappointed in the fit!

@bubbie3533 Год назад

Sounds good Jason. 👍

@AutoEdits Год назад

Thanks!

@pthrelkeld090 3 месяца назад

I like to think this particular exhaust system was made for the square body specifically😂

@AutoEdits 3 месяца назад

I would completely agree!

@evanwerner9441 16 дней назад

Would like an update man. Sweet ride!

@AutoEdits 12 дней назад

Thanks! Will do!

@jeradmiller4575 11 месяцев назад

Sounds great!

@AutoEdits 11 месяцев назад

I'm super happy with it!

@delbert9357 8 месяцев назад

Nice truck. I have 1973 K10 4 speed and recently had 2 1/2 dual exhaust put on and dropped 2 super 10s about 2 or 3 feet behind the cab. You can definitely hear it.

@AutoEdits 8 месяцев назад

Very nice!

@1RoadGarage Год назад

Jason! Another great one dude! Excellent quality of video. Fun. 🤙

@AutoEdits Год назад

Thanks so much!!! Just had fun with this one.

@1RoadGarage Год назад

@@AutoEdits I know you’ve said it before in a vid but you used to do video work for MotorTrend?? Your style of filming and editing along with the music is very professional.

@AutoEdits Год назад

@@1RoadGarage I did work there for a bit on a couple of shows... mostly Dirt Every Day. I appreciate that you notice!!! When I watch your stuff, I'm always SOOO impressed by the amount of detail you get. I know that takes time and the fact you always deliver is pretty inspiring!

@theartmannchannel Год назад

Thanks! Challenge for Jason's fans. Who can top that?

@AutoEdits Год назад

So nice of you! I really appreciate the super thanks and challenge but I think your hollering into an empty room over here... 😂

@johnmcwade222 Год назад

If you want a little louder and more rowdy, swap in a Comp Cams Thumper Cam, lifters, rockers, that will give it some more bark. Exhaust sounds great.

@AutoEdits Год назад

It does need all of that... but it's gotta pass tailpipe smog check here in CA.

@SQLRYAN Год назад

Yay Jason. Good to know you're alive. Was concerned since haven't seen snything from you in a couple of months?! Good ol' dual exhaust upgrade is a must for any self respecting car guy or a gal. Good to see your awesome video!

@AutoEdits Год назад

Yep, I was really having a tough time and just trying to push through. This was a fun one to make and I hope for better times.

@SQLRYAN Год назад

@@AutoEdits Hope everything turn out well for you. Hang in there brother.

@AutoEdits Год назад

Thank you!

@dude5576 3 месяца назад

that sounds good

@AutoEdits 3 месяца назад

I love it... and it looks great to!

@red07ls Год назад

Thanks!

@AutoEdits Год назад

DAAANG! 🙌

@Gilliatt83 Год назад

Like the Truck, it's cool.

@AutoEdits Год назад

I agree!

@WillometMotorFab Год назад

I just love to see you welding! #squarebodybuddies

@AutoEdits Год назад

It felt pretty dang good to roll out the ol' metal gluing together machine 🥽🪄

@PaulKaiser42 Год назад

Do you think it’s so quiet because you moved the pipe out the back?? I think it sounds great and love the look of the whole truck!! Great video as always👍🏻. Keep them coming😀

@AutoEdits Год назад

Yep, absolutely and I like that about it. Thanks dude… I’ll keep at it… glad you’re here!

@TheDon8771 Год назад

I definitely would have ran it the same way in the rear. 👍🏻

@AutoEdits Год назад

Right on!

@user-wp7ej4mr3s 4 месяца назад

Great vid got a question do you think this exhaust is loud enough for the neighbors to hear idling and when you pass by people cars and houses they car hear u?

@AutoEdits 4 месяца назад

At idle it's pretty mellow but still louder than stock.

@joshua6200 Год назад

Getting rid of those "pee shooters", love it!

@MrBigshow101171 Год назад

Middle is bad ass

@AutoEdits Год назад

Hey thanks!

@Jaythegoat245 3 месяца назад

Great video I have an 86 c10 stock 350 thinking about this exhaust. I live on a backroad and do cruising speeds around 55 u think people will hear me coming in a distance?

@AutoEdits 3 месяца назад

It's pretty healthy sounding.

@Spawndukes Месяц назад

Have you ever used that exhaust paste on the slip together joints? It is supposed to help prevent leaking.

@AutoEdits Месяц назад

It doesn't leak so I don't need that stuff.

@hellraiser1478 2 месяца назад

Have a '77 Big10, 350 that looks a lot like your truck. Looking for a quiet exhaust kit that will give me better MPG and can be easily installed like the one in your video. Also, is there any benefit to running pipes out the side vs out the rear? Thank you so much for sharing your experience. Cheers

@AutoEdits 2 месяца назад

Pipes out the back or side is just personal preference. It's a bit quieter in the cab with them pointed out the back.

@dinkydotzero Год назад

Now we straight axle it and add a divorced 205 transfer case

@AutoEdits Год назад

Wow, now we're talking!

@jeepinintexas6215 Год назад

Next upgrade/mod, call LMC Truck and get yourself a decent looking rear bumper lol.

@AutoEdits Год назад

I’ll look that up!

@Gdaddygabe 5 месяцев назад

“Butt Dyno” just became a part of my vocabulary 😂

@AutoEdits 5 месяцев назад

🤣

@navseal345 Год назад

👍👍

@AutoEdits Год назад

🙌

@JC4041 Год назад

hmmmmm I know that freeway entrance intersection lol....looks like VP.

@AutoEdits Год назад

You got it!

@JC4041 Год назад

@@AutoEdits had to get off the 14 and take SH there to bypass a wreck one of my Sepulveda VA trips

@dannygreen2910 9 месяцев назад

What parts numbers are those nice job

@AutoEdits 9 месяцев назад

www.amazon.com/shop/autoedits/list/29FURZA60A89N?ref_=aip_sf_list_spv_ofs_mixed_d

@arlohaack9966 11 месяцев назад

welding required in certain spots?

@AutoEdits 11 месяцев назад

You could do it with clamps but it's easier for me to just weld it up.

@bdtaylor1979 Год назад

You went from a straight through muffler to a chambered muffler, that’s why it’s a little quieter. Also, I would have went with something like Magnaflow instead of chokemasters/dronemasters.

@AutoEdits Год назад

It's only quieter in the cab and it's way louder out the tailpipe than the glasspacks, which is perfect for what I wanted. Magnaflow doesn't sell a kit for this vehicle (why not???) and Flowmaster has the most kits available and the absolute best fitting bends on the market by far. Love the Magnaflow on my Jeep but the tail section from the resonator back is not as precise as my older Flowmaster American Thunder kit was. For reference ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oV8w2zQAOHk.html

@bdtaylor1979 Год назад

@@AutoEdits that’s understandable. I like the sound of Flowmaster, especially on older vehicles like the square body, I just don’t like the drone that they are known for and I’ve personally experienced. I like the deeper sound of Magnaflow but I just wish they were slightly louder.

@AutoEdits Год назад

@@bdtaylor1979 It is one of the great mysteries of the universe... trying to get that no compromise sound 🤣

@bdtaylor1979 Год назад

@@AutoEdits yeah, 99.9999999% impossible 🤣. I’ve had more mufflers than I can remember trying to find it but hasn’t happened yet 🤷‍♂️

@eliswalley6088 3 месяца назад

Next a Bluetooth radio with speakers

@loganwitcher4037 12 дней назад

how much of a lift

@BernardManansala 11 месяцев назад

Are we getting a Squarebody update?

@AutoEdits 11 месяцев назад

I'm having a difficult time getting out to make videos but am getting closer.

@paint3ball Год назад

Like the tone but not loud enough for my taste

@AutoEdits Год назад

I hear ya... the easy way to change that is put the "Outlaw" cans on instead of the Super44s. Those are the one's I took the chrome tip off of and were a bit too loud on the Mustang project. Another thing I noticed is that since the pipes exit all the way out the back... the noise is projected outside the vehicle but is mellow inside.

@paint3ball Год назад

@@AutoEdits I have an 06 Silverado but I’m currently on the search for an 87 k10. I’ve got true duals and no mufflers. I’ve got mine coming out the back at 45° angles so you can hear it a little more in the cab. Can’t wait to see what other upgrades you do on your truck.